[U-Boot,v2,3/4] configs: dra71x-evm: Add Support for NAND

Message ID	20190227075938.7180-4-faiz_abbas@ti.com
State	Accepted
Delegated to:	Tom Rini
Headers	show Return-Path: <u-boot-bounces@lists.denx.de> From: Faiz Abbas <faiz_abbas@ti.com> To: <u-boot@lists.denx.de> Date: Wed, 27 Feb 2019 13:29:37 +0530 Message-ID: <20190227075938.7180-4-faiz_abbas@ti.com> In-Reply-To: <20190227075938.7180-1-faiz_abbas@ti.com> References: <20190227075938.7180-1-faiz_abbas@ti.com> MIME-Version: 1.0 Cc: trini@konsulko.com Subject: [U-Boot] [PATCH v2 3/4] configs: dra71x-evm: Add Support for NAND Precedence: list Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
Series	Add Support for NAND in dra71x-evm \| expand [U-Boot,v2,0/4] Add Support for NAND in dra71x-evm [U-Boot,v2,1/4] board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM [U-Boot,v2,2/4] arm: dra7: Allow NAND to be enabled on DRA71x EVM. [U-Boot,v2,3/4] configs: dra71x-evm: Add Support for NAND [U-Boot,v2,4/4] configs: ti_omap5_common: Add NAND environment settings

Message ID

20190227075938.7180-4-faiz_abbas@ti.com

State

Accepted

Delegated to:

Tom Rini

Headers

From: Faiz Abbas <faiz_abbas@ti.com>
To: <u-boot@lists.denx.de>
Date: Wed, 27 Feb 2019 13:29:37 +0530
Message-ID: <20190227075938.7180-4-faiz_abbas@ti.com>
In-Reply-To: <20190227075938.7180-1-faiz_abbas@ti.com>
References: <20190227075938.7180-1-faiz_abbas@ti.com>
MIME-Version: 1.0
Cc: trini@konsulko.com
Subject: [U-Boot] [PATCH v2 3/4] configs: dra71x-evm: Add Support for NAND
Precedence: list
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: base64
Errors-To: u-boot-bounces@lists.denx.de
Sender: "U-Boot" <u-boot-bounces@lists.denx.de>

Series

Add Support for NAND in dra71x-evm | expand

Add NAND support to dra71x-evm defconfig Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> --- configs/dra7xx_evm_defconfig | 3 +++ configs/dra7xx_hs_evm_defconfig | 3 +++ 2 files changed, 6 insertions(+)

Comments

Tom Rini April 12, 2019, 4:30 p.m. UTC | #1

On Wed, Feb 27, 2019 at 01:29:37PM +0530, Faiz Abbas wrote:

> Add NAND support to dra71x-evm defconfig
> 
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>

Applied to u-boot/master, thanks!

diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
index 3f25a2ec28..d71d989c4c 100644
--- a/configs/dra7xx_evm_defconfig
+++ b/configs/dra7xx_evm_defconfig
@@ -28,6 +28,7 @@  CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_CMD_SPL=y
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_NAND=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
@@ -66,6 +67,8 @@  CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_SPL_MMC_HS200_SUPPORT=y
 CONFIG_MMC_OMAP_HS=y
+CONFIG_NAND=y
+CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y
diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig
index ee28e0c6ec..4642da3c01 100644
--- a/configs/dra7xx_hs_evm_defconfig
+++ b/configs/dra7xx_hs_evm_defconfig
@@ -32,6 +32,7 @@  CONFIG_SPL_DMA_SUPPORT=y
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_SPL_SPI_LOAD=y
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_NAND=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
@@ -70,6 +71,8 @@  CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_SPL_MMC_HS200_SUPPORT=y
 CONFIG_MMC_OMAP_HS=y
+CONFIG_NAND=y
+CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y

[U-Boot,v2,3/4] configs: dra71x-evm: Add Support for NAND

Commit Message

Comments

Patch