diff mbox series

[U-Boot,v2,08/23] apalis_imx6: enable pin control driver

Message ID	20190208171226.16169-9-marcel@ziswiler.com
State	Awaiting Upstream
Delegated to:	Stefano Babic
Headers	show Return-Path: <u-boot-bounces@lists.denx.de> From: Marcel Ziswiler <marcel@ziswiler.com> To: u-boot@lists.denx.de Date: Fri, 8 Feb 2019 18:12:11 +0100 Message-Id: <20190208171226.16169-9-marcel@ziswiler.com> In-Reply-To: <20190208171226.16169-1-marcel@ziswiler.com> References: <20190208171226.16169-1-marcel@ziswiler.com> MIME-Version: 1.0 Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>, Max Krummenacher <max.krummenacher@toradex.com> Subject: [U-Boot] [PATCH v2 08/23] apalis_imx6: enable pin control driver Precedence: list Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
Series	apalis imx6 fixes, device tree enablement and driver model conversion \| expand [U-Boot,v2,00/23] apalis imx6 fixes, device tree enablement and driver model conversion [U-Boot,v2,01/23] apalis_imx6: get rid of obsolete nospl configurations [U-Boot,v2,02/23] apalis_imx6: use distro defaults [U-Boot,v2,03/23] apalis_imx6: move console in env from header file to defconfig [U-Boot,v2,04/23] apalis_imx6: enable fit image, gpt, imx thermal, efi loader support [U-Boot,v2,05/23] apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration [U-Boot,v2,06/23] apalis_imx6: migrate to using device tree [U-Boot,v2,07/23] apalis_imx6: clean-up and migrate gpios to using driver model [U-Boot,v2,08/23] apalis_imx6: enable pin control driver [U-Boot,v2,09/23] apalis_imx6: migrate i2c to using driver model [U-Boot,v2,10/23] apalis_imx6: migrate pmic and regulator to using driver model [U-Boot,v2,11/23] apalis_imx6: migrate mmc and sata to using driver model [U-Boot,v2,12/23] apalis_imx6: migrate usb to using driver model [U-Boot,v2,13/23] apalis_imx6: drop CONFIG_OF_SYSTEM_SETUP [U-Boot,v2,14/23] apalis_imx6: add distroboot support [U-Boot,v2,15/23] apalis_imx6: use both sd/mmc interfaces for setsdupdate [U-Boot,v2,16/23] apalis_imx6: unify sd/mmc drive strength with linux kernel settings [U-Boot,v2,17/23] apalis_imx6: pf0100: reorder and cleanup message printing [U-Boot,v2,18/23] apalis_imx6: disable ri and dcd irq in uarts [U-Boot,v2,19/23] apalis_imx6: revert fuse value set in mfgr_fuse [U-Boot,v2,20/23] configs: apalis_imx6: Use ext4 file system by default [U-Boot,v2,21/23] apalis_imx6: use SDP if USB serial downloader has been used [U-Boot,v2,22/23] apalis_imx6: switch to zimage [U-Boot,v2,23/23] board: apalis_imx6: check for and report ecc errors in fuses

Commit Message

Marcel Ziswiler Feb. 8, 2019, 5:12 p.m. UTC

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Enable pin control driver as required for further driver model
migration.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

Changes in v2: None

 configs/apalis_imx6_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff mbox series

Patch

diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig
index 0f6119bef5..0763b1d986 100644
--- a/configs/apalis_imx6_defconfig
+++ b/configs/apalis_imx6_defconfig
@@ -57,6 +57,8 @@  CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
 CONFIG_IMX_THERMAL=y
 CONFIG_USB=y
 CONFIG_USB_KEYBOARD=y