diff mbox series

[U-Boot,v11,17/28] bmips: enable nb4-ser enet support

Message ID 20181201180042.23103-18-noltari@gmail.com
State Accepted
Delegated to: Daniel Schwierzeck
Headers show
Series bmips: add iudma/enet support | expand

Commit Message

Álvaro Fernández Rojas Dec. 1, 2018, 6 p.m. UTC 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 v11: no changes
 v10: no changes
 v9: no changes
 v8: no changes
 v5: no changes
 v4: no changes
 v3: no changes
 v2: no changes

 arch/mips/dts/sfr,nb4-ser.dts     | 24 ++++++++++++++++++++++++
 configs/sfr_nb4-ser_ram_defconfig |  8 +++++++-
 2 files changed, 31 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/mips/dts/sfr,nb4-ser.dts b/arch/mips/dts/sfr,nb4-ser.dts
index bdc6f8ae45..dfbc4148dc 100644
--- a/arch/mips/dts/sfr,nb4-ser.dts
+++ b/arch/mips/dts/sfr,nb4-ser.dts
@@ -53,6 +53,30 @@ 
 	status = "okay";
 };
 
+&enet0 {
+	status = "okay";
+	phy = <&enet0phy>;
+	phy-mode = "internal";
+
+	enet0phy: fixed-link {
+		reg = <1>;
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&enet1 {
+	status = "okay";
+	phy = <&enet1phy>;
+	phy-mode = "mii";
+
+	enet1phy: fixed-link {
+		reg = <1>;
+		speed = <100>;
+		full-duplex;
+	};
+};
+
 &gpio0 {
 	status = "okay";
 };
diff --git a/configs/sfr_nb4-ser_ram_defconfig b/configs/sfr_nb4-ser_ram_defconfig
index 12adfb01e7..39622875b1 100644
--- a/configs/sfr_nb4-ser_ram_defconfig
+++ b/configs/sfr_nb4-ser_ram_defconfig
@@ -26,11 +26,14 @@  CONFIG_CMD_LICENSE=y
 CONFIG_CMD_MEMINFO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_USB=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
 # CONFIG_CMD_MISC is not set
 CONFIG_OF_EMBED=y
 CONFIG_DEFAULT_DEVICE_TREE="sfr,nb4-ser"
-# CONFIG_NET is not set
+CONFIG_NET_RANDOM_ETHADDR=y
 # CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_BCM6348_IUDMA=y
 CONFIG_DM_GPIO=y
 CONFIG_BCM6345_GPIO=y
 CONFIG_LED=y
@@ -42,6 +45,9 @@  CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_CFI_FLASH=y
 CONFIG_SYS_FLASH_PROTECTION=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_PHY_FIXED=y
+CONFIG_DM_ETH=y
+CONFIG_BCM6348_ETH=y
 CONFIG_PHY=y
 CONFIG_BCM6358_USBH_PHY=y
 CONFIG_DM_RESET=y