@@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2012 Altera <www.altera.com>
+ * Copyright (C) 2012 Altera <www.altera.com>
*/
-#include "skeleton.dtsi"
#include <dt-bindings/reset/altr,rst-mgr.h>
/ {
@@ -11,34 +10,26 @@
#size-cells = <1>;
aliases {
- ethernet0 = &gmac0;
- ethernet1 = &gmac1;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
serial0 = &uart0;
serial1 = &uart1;
timer0 = &timer0;
timer1 = &timer1;
timer2 = &timer2;
timer3 = &timer3;
- spi0 = &qspi;
- spi1 = &spi0;
- spi2 = &spi1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "altr,socfpga-smp";
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <1>;
@@ -46,6 +37,15 @@
};
};
+ pmu: pmu@ff111000 {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&intc>;
+ interrupts = <0 176 4>, <0 177 4>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ reg = <0xff111000 0x1000>,
+ <0xff113000 0x1000>;
+ };
+
intc: intc@fffed000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
@@ -63,7 +63,7 @@
ranges;
amba {
- compatible = "arm,amba-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -87,6 +87,14 @@
};
};
+ base_fpga_region {
+ compatible = "fpga-region";
+ fpga-mgr = <&fpgamgr0>;
+
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ };
+
can0: can@ffc00000 {
compatible = "bosch,d_can";
reg = <0xffc00000 0x1000>;
@@ -131,7 +139,7 @@
compatible = "fixed-clock";
};
- main_pll: main_pll {
+ main_pll: main_pll@40 {
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
@@ -139,7 +147,7 @@
clocks = <&osc1>;
reg = <0x40>;
- mpuclk: mpuclk {
+ mpuclk: mpuclk@48 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
@@ -147,7 +155,7 @@
reg = <0x48>;
};
- mainclk: mainclk {
+ mainclk: mainclk@4c {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
@@ -155,29 +163,29 @@
reg = <0x4C>;
};
- dbg_base_clk: dbg_base_clk {
+ dbg_base_clk: dbg_base_clk@50 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
- clocks = <&main_pll>;
+ clocks = <&main_pll>, <&osc1>;
div-reg = <0xe8 0 9>;
reg = <0x50>;
};
- main_qspi_clk: main_qspi_clk {
+ main_qspi_clk: main_qspi_clk@54 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
reg = <0x54>;
};
- main_nand_sdmmc_clk: main_nand_sdmmc_clk {
+ main_nand_sdmmc_clk: main_nand_sdmmc_clk@58 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
reg = <0x58>;
};
- cfg_h2f_usr0_clk: cfg_h2f_usr0_clk {
+ cfg_h2f_usr0_clk: cfg_h2f_usr0_clk@5c {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
@@ -185,7 +193,7 @@
};
};
- periph_pll: periph_pll {
+ periph_pll: periph_pll@80 {
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
@@ -193,42 +201,42 @@
clocks = <&osc1>, <&osc2>, <&f2s_periph_ref_clk>;
reg = <0x80>;
- emac0_clk: emac0_clk {
+ emac0_clk: emac0_clk@88 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&periph_pll>;
reg = <0x88>;
};
- emac1_clk: emac1_clk {
+ emac1_clk: emac1_clk@8c {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&periph_pll>;
reg = <0x8C>;
};
- per_qspi_clk: per_qsi_clk {
+ per_qspi_clk: per_qsi_clk@90 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&periph_pll>;
reg = <0x90>;
};
- per_nand_mmc_clk: per_nand_mmc_clk {
+ per_nand_mmc_clk: per_nand_mmc_clk@94 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&periph_pll>;
reg = <0x94>;
};
- per_base_clk: per_base_clk {
+ per_base_clk: per_base_clk@98 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&periph_pll>;
reg = <0x98>;
};
- h2f_usr1_clk: h2f_usr1_clk {
+ h2f_usr1_clk: h2f_usr1_clk@9c {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&periph_pll>;
@@ -236,7 +244,7 @@
};
};
- sdram_pll: sdram_pll {
+ sdram_pll: sdram_pll@c0 {
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
@@ -244,28 +252,28 @@
clocks = <&osc1>, <&osc2>, <&f2s_sdram_ref_clk>;
reg = <0xC0>;
- ddr_dqs_clk: ddr_dqs_clk {
+ ddr_dqs_clk: ddr_dqs_clk@c8 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&sdram_pll>;
reg = <0xC8>;
};
- ddr_2x_dqs_clk: ddr_2x_dqs_clk {
+ ddr_2x_dqs_clk: ddr_2x_dqs_clk@cc {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&sdram_pll>;
reg = <0xCC>;
};
- ddr_dq_clk: ddr_dq_clk {
+ ddr_dq_clk: ddr_dq_clk@d0 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&sdram_pll>;
reg = <0xD0>;
};
- h2f_usr2_clk: h2f_usr2_clk {
+ h2f_usr2_clk: h2f_usr2_clk@d4 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&sdram_pll>;
@@ -312,7 +320,7 @@
l3_sp_clk: l3_sp_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-gate-clk";
- clocks = <&mainclk>;
+ clocks = <&l3_mp_clk>;
div-reg = <0x64 2 2>;
};
@@ -343,7 +351,7 @@
dbg_clk: dbg_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-gate-clk";
- clocks = <&dbg_base_clk>;
+ clocks = <&dbg_at_clk>;
div-reg = <0x68 2 2>;
clk-gate = <0x60 5>;
};
@@ -446,6 +454,14 @@
clk-phase = <0 135>;
};
+ sdmmc_clk_divided: sdmmc_clk_divided {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&sdmmc_clk>;
+ clk-gate = <0xa0 8>;
+ fixed-divider = <4>;
+ };
+
nand_x_clk: nand_x_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-gate-clk";
@@ -453,10 +469,17 @@
clk-gate = <0xa0 9>;
};
+ nand_ecc_clk: nand_ecc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&nand_x_clk>;
+ clk-gate = <0xa0 9>;
+ };
+
nand_clk: nand_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-gate-clk";
- clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+ clocks = <&nand_x_clk>;
clk-gate = <0xa0 10>;
fixed-divider = <4>;
};
@@ -467,8 +490,58 @@
clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
clk-gate = <0xa0 11>;
};
+
+ ddr_dqs_clk_gate: ddr_dqs_clk_gate {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&ddr_dqs_clk>;
+ clk-gate = <0xd8 0>;
+ };
+
+ ddr_2x_dqs_clk_gate: ddr_2x_dqs_clk_gate {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&ddr_2x_dqs_clk>;
+ clk-gate = <0xd8 1>;
+ };
+
+ ddr_dq_clk_gate: ddr_dq_clk_gate {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&ddr_dq_clk>;
+ clk-gate = <0xd8 2>;
+ };
+
+ h2f_user2_clk: h2f_user2_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&h2f_usr2_clk>;
+ clk-gate = <0xd8 3>;
+ };
+
};
- };
+ };
+
+ fpga_bridge0: fpga_bridge@ff400000 {
+ compatible = "altr,socfpga-lwhps2fpga-bridge";
+ reg = <0xff400000 0x100000>;
+ resets = <&rst LWHPS2FPGA_RESET>;
+ clocks = <&l4_main_clk>;
+ };
+
+ fpga_bridge1: fpga_bridge@ff500000 {
+ compatible = "altr,socfpga-hps2fpga-bridge";
+ reg = <0xff500000 0x10000>;
+ resets = <&rst HPS2FPGA_RESET>;
+ clocks = <&l4_main_clk>;
+ };
+
+ fpgamgr0: fpgamgr@ff706000 {
+ compatible = "altr,socfpga-fpga-mgr";
+ reg = <0xff706000 0x1000
+ 0xffb90000 0x4>;
+ interrupts = <0 175 4>;
+ };
gmac0: ethernet@ff700000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
@@ -477,12 +550,14 @@
interrupts = <0 115 4>;
interrupt-names = "macirq";
mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
- clocks = <&emac0_clk>;
+ clocks = <&emac_0_clk>;
clock-names = "stmmaceth";
resets = <&rst EMAC0_RESET>;
reset-names = "stmmaceth";
snps,multicast-filter-bins = <256>;
snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <4096>;
status = "disabled";
};
@@ -493,60 +568,14 @@
interrupts = <0 120 4>;
interrupt-names = "macirq";
mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
- clocks = <&emac1_clk>;
+ clocks = <&emac_1_clk>;
clock-names = "stmmaceth";
resets = <&rst EMAC1_RESET>;
reset-names = "stmmaceth";
snps,multicast-filter-bins = <256>;
snps,perfect-filter-entries = <128>;
- status = "disabled";
- };
-
- i2c0: i2c@ffc04000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,designware-i2c";
- reg = <0xffc04000 0x1000>;
- clocks = <&l4_sp_clk>;
- resets = <&rst I2C0_RESET>;
- reset-names = "i2c";
- interrupts = <0 158 0x4>;
- status = "disabled";
- };
-
- i2c1: i2c@ffc05000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,designware-i2c";
- reg = <0xffc05000 0x1000>;
- clocks = <&l4_sp_clk>;
- resets = <&rst I2C1_RESET>;
- reset-names = "i2c";
- interrupts = <0 159 0x4>;
- status = "disabled";
- };
-
- i2c2: i2c@ffc06000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,designware-i2c";
- reg = <0xffc06000 0x1000>;
- clocks = <&l4_sp_clk>;
- resets = <&rst I2C2_RESET>;
- reset-names = "i2c";
- interrupts = <0 160 0x4>;
- status = "disabled";
- };
-
- i2c3: i2c@ffc07000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,designware-i2c";
- reg = <0xffc07000 0x1000>;
- clocks = <&l4_sp_clk>;
- resets = <&rst I2C3_RESET>;
- reset-names = "i2c";
- interrupts = <0 161 0x4>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <4096>;
status = "disabled";
};
@@ -555,12 +584,11 @@
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xff708000 0x1000>;
- clocks = <&per_base_clk>;
+ clocks = <&l4_mp_clk>;
status = "disabled";
porta: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
- bank-name = "porta";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <29>;
@@ -576,12 +604,11 @@
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xff709000 0x1000>;
- clocks = <&per_base_clk>;
+ clocks = <&l4_mp_clk>;
status = "disabled";
portb: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
- bank-name = "portb";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <29>;
@@ -597,12 +624,11 @@
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xff70a000 0x1000>;
- clocks = <&per_base_clk>;
+ clocks = <&l4_mp_clk>;
status = "disabled";
portc: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
- bank-name = "portc";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <27>;
@@ -613,15 +639,68 @@
};
};
- sdr: sdr@ffc25000 {
- compatible = "syscon";
- reg = <0xffc25000 0x1000>;
+ i2c0: i2c@ffc04000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc04000 0x1000>;
+ resets = <&rst I2C0_RESET>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 158 0x4>;
+ status = "disabled";
};
- sdramedac {
- compatible = "altr,sdram-edac";
- altr,sdr-syscon = <&sdr>;
- interrupts = <0 39 4>;
+ i2c1: i2c@ffc05000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc05000 0x1000>;
+ resets = <&rst I2C1_RESET>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 159 0x4>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ffc06000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc06000 0x1000>;
+ resets = <&rst I2C2_RESET>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 160 0x4>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ffc07000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc07000 0x1000>;
+ resets = <&rst I2C3_RESET>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 161 0x4>;
+ status = "disabled";
+ };
+
+ eccmgr: eccmgr {
+ compatible = "altr,socfpga-ecc-manager";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ l2-ecc@ffd08140 {
+ compatible = "altr,socfpga-l2-ecc";
+ reg = <0xffd08140 0x4>;
+ interrupts = <0 36 1>, <0 37 1>;
+ };
+
+ ocram-ecc@ffd08144 {
+ compatible = "altr,socfpga-ocram-ecc";
+ reg = <0xffd08144 0x4>;
+ iram = <&ocram>;
+ interrupts = <0 178 1>, <0 179 1>;
+ };
};
L2: l2-cache@fffef000 {
@@ -632,36 +711,89 @@
cache-level = <2>;
arm,tag-latency = <1 1 1>;
arm,data-latency = <2 1 1>;
+ prefetch-data = <1>;
+ prefetch-instr = <1>;
+ arm,shared-override;
+ arm,double-linefill = <1>;
+ arm,double-linefill-incr = <0>;
+ arm,double-linefill-wrap = <1>;
+ arm,prefetch-drop = <0>;
+ arm,prefetch-offset = <7>;
+ };
+
+ l3regs@0xff800000 {
+ compatible = "altr,l3regs", "syscon";
+ reg = <0xff800000 0x1000>;
};
- mmc0: dwmmc0@ff704000 {
+ mmc: dwmmc0@ff704000 {
compatible = "altr,socfpga-dw-mshc";
reg = <0xff704000 0x1000>;
interrupts = <0 139 4>;
fifo-depth = <0x400>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+ clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
clock-names = "biu", "ciu";
+ status = "disabled";
+ };
+
+ nand0: nand@ff900000 {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "altr,socfpga-denali-nand";
+ reg = <0xff900000 0x100000>,
+ <0xffb80000 0x10000>;
+ reg-names = "nand_data", "denali_reg";
+ interrupts = <0x0 0x90 0x4>;
+ dma-mask = <0xffffffff>;
+ clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+ clock-names = "nand", "nand_x", "ecc";
+ status = "disabled";
+ };
+
+ ocram: sram@ffff0000 {
+ compatible = "mmio-sram";
+ reg = <0xffff0000 0x10000>;
};
qspi: spi@ff705000 {
compatible = "cdns,qspi-nor";
- #address-cells = <1>;
+ #address-cells = <1>;
#size-cells = <0>;
reg = <0xff705000 0x1000>,
- <0xffa00000 0x1000>;
+ <0xffa00000 0x1000>;
interrupts = <0 151 4>;
- clocks = <&qspi_clk>;
- ext-decoder = <0>; /* external decoder */
- num-cs = <4>;
cdns,fifo-depth = <128>;
cdns,fifo-width = <4>;
cdns,trigger-address = <0x00000000>;
- bus-num = <2>;
+ clocks = <&qspi_clk>;
status = "disabled";
};
+ rst: rstmgr@ffd05000 {
+ #reset-cells = <1>;
+ compatible = "altr,rst-mgr";
+ reg = <0xffd05000 0x1000>;
+ altr,modrst-offset = <0x10>;
+ };
+
+ scu: snoop-control-unit@fffec000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xfffec000 0x100>;
+ };
+
+ sdr: sdr@ffc25000 {
+ compatible = "altr,sdr-ctl", "syscon";
+ reg = <0xffc25000 0x1000>;
+ };
+
+ sdramedac {
+ compatible = "altr,sdram-edac";
+ altr,sdr-syscon = <&sdr>;
+ interrupts = <0 39 4>;
+ };
+
spi0: spi@fff00000 {
compatible = "snps,dw-apb-ssi";
#address-cells = <1>;
@@ -669,10 +801,7 @@
reg = <0xfff00000 0x1000>;
interrupts = <0 154 4>;
num-cs = <4>;
- bus-num = <0>;
- tx-dma-channel = <&pdma 16>;
- rx-dma-channel = <&pdma 17>;
- clocks = <&per_base_clk>;
+ clocks = <&spi_m_clk>;
status = "disabled";
};
@@ -681,20 +810,22 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0xfff01000 0x1000>;
- interrupts = <0 156 4>;
+ interrupts = <0 155 4>;
num-cs = <4>;
- bus-num = <1>;
- tx-dma-channel = <&pdma 20>;
- rx-dma-channel = <&pdma 21>;
- clocks = <&per_base_clk>;
+ clocks = <&spi_m_clk>;
status = "disabled";
};
+ sysmgr: sysmgr@ffd08000 {
+ compatible = "altr,sys-mgr", "syscon";
+ reg = <0xffd08000 0x4000>;
+ };
+
/* Local timer */
timer@fffec600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xfffec600 0x100>;
- interrupts = <1 13 0xf04>;
+ interrupts = <1 13 0xf01>;
clocks = <&mpu_periph_clk>;
};
@@ -704,6 +835,8 @@
reg = <0xffc08000 0x1000>;
clocks = <&l4_sp_clk>;
clock-names = "timer";
+ resets = <&rst SPTIMER0_RESET>;
+ reset-names = "timer";
};
timer1: timer1@ffc09000 {
@@ -712,6 +845,8 @@
reg = <0xffc09000 0x1000>;
clocks = <&l4_sp_clk>;
clock-names = "timer";
+ resets = <&rst SPTIMER1_RESET>;
+ reset-names = "timer";
};
timer2: timer2@ffd00000 {
@@ -720,6 +855,8 @@
reg = <0xffd00000 0x1000>;
clocks = <&osc1>;
clock-names = "timer";
+ resets = <&rst OSC1TIMER0_RESET>;
+ reset-names = "timer";
};
timer3: timer3@ffd01000 {
@@ -728,6 +865,8 @@
reg = <0xffd01000 0x1000>;
clocks = <&osc1>;
clock-names = "timer";
+ resets = <&rst OSC1TIMER1_RESET>;
+ reset-names = "timer";
};
uart0: serial0@ffc02000 {
@@ -737,7 +876,9 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&l4_sp_clk>;
- clock-frequency = <100000000>;
+ dmas = <&pdma 28>,
+ <&pdma 29>;
+ dma-names = "tx", "rx";
};
uart1: serial1@ffc03000 {
@@ -747,16 +888,12 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&l4_sp_clk>;
- clock-frequency = <100000000>;
+ dmas = <&pdma 30>,
+ <&pdma 31>;
+ dma-names = "tx", "rx";
};
- rst: rstmgr@ffd05000 {
- #reset-cells = <1>;
- compatible = "altr,rst-mgr";
- reg = <0xffd05000 0x1000>;
- };
-
- usbphy0: usbphy@0 {
+ usbphy0: usbphy {
#phy-cells = <0>;
compatible = "usb-nop-xceiv";
status = "okay";
@@ -768,6 +905,8 @@
interrupts = <0 125 4>;
clocks = <&usb_mp_clk>;
clock-names = "otg";
+ resets = <&rst USB0_RESET>;
+ reset-names = "dwc2";
phys = <&usbphy0>;
phy-names = "usb2-phy";
status = "disabled";
@@ -779,6 +918,8 @@
interrupts = <0 128 4>;
clocks = <&usb_mp_clk>;
clock-names = "otg";
+ resets = <&rst USB1_RESET>;
+ reset-names = "dwc2";
phys = <&usbphy0>;
phy-names = "usb2-phy";
status = "disabled";
@@ -799,10 +940,5 @@
clocks = <&osc1>;
status = "disabled";
};
-
- sysmgr: sysmgr@ffd08000 {
- compatible = "altr,sys-mgr", "syscon";
- reg = <0xffd08000 0x4000>;
- };
};
};
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+
+// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
*/
/dts-v1/;
@@ -19,13 +19,10 @@
};
mmc0: dwmmc0@ff704000 {
- num-slots = <1>;
broken-cd;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
- drvsel = <3>;
- smplsel = <0>;
};
sysmgr@ffd08000 {
@@ -33,3 +30,7 @@
};
};
};
+
+&watchdog0 {
+ status = "okay";
+};
new file mode 100644
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (c) 2018 Simon Goldschmidt
+ */
+
+/{
+ aliases {
+ spi0 = "/soc/spi@ff705000";
+ udc0 = &usb1;
+ };
+
+ soc {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&watchdog0 {
+ status = "disabled";
+};
+
+&mmc {
+ u-boot,dm-pre-reloc;
+};
+
+&qspi {
+ u-boot,dm-pre-reloc;
+};
+
+&flash {
+ compatible = "n25q00", "spi-flash";
+ u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+ clock-frequency = <100000000>;
+ u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+ clock-frequency = <100000000>;
+};
+
+&porta {
+ bank-name = "porta";
+};
+
+&portb {
+ bank-name = "portb";
+};
+
+&portc {
+ bank-name = "portc";
+};
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
*/
#include "socfpga_arria5.dtsi"
@@ -10,22 +10,44 @@
compatible = "altr,socfpga-arria5", "altr,socfpga";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "earlyprintk";
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@0 {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1GB */
};
aliases {
- /* this allow the ethaddr uboot environment variable contents
- * to be added to the gmac1 device tree blob.
- */
+ /* this allow the ethaddr uboot environmnet variable contents
+ * to be added to the gmac1 device tree blob.
+ */
ethernet0 = &gmac1;
- udc0 = &usb1;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ hps0 {
+ label = "hps_led0";
+ gpios = <&porta 0 1>;
+ };
+
+ hps1 {
+ label = "hps_led1";
+ gpios = <&portb 11 1>;
+ };
+
+ hps2 {
+ label = "hps_led2";
+ gpios = <&porta 17 1>;
+ };
+
+ hps3 {
+ label = "hps_led3";
+ gpios = <&porta 18 1>;
+ };
};
regulator_3_3v: 3-3-v-regulator {
@@ -34,10 +56,6 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
-
- soc {
- u-boot,dm-pre-reloc;
- };
};
&gmac1 {
@@ -54,8 +72,28 @@
rxc-skew-ps = <2000>;
};
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
+ clock-frequency = <100000>;
+
+ /*
+ * adjust the falling times to decrease the i2c frequency to 50Khz
+ * because the LCD module does not work at the standard 100Khz
+ */
+ i2c-sda-falling-time-ns = <5000>;
+ i2c-scl-falling-time-ns = <5000>;
eeprom@51 {
compatible = "atmel,24c32";
@@ -72,35 +110,42 @@
&mmc0 {
vmmc-supply = <®ulator_3_3v>;
vqmmc-supply = <®ulator_3_3v>;
- bus-width = <4>;
- u-boot,dm-pre-reloc;
-};
-
-&usb1 {
status = "okay";
};
&qspi {
status = "okay";
- u-boot,dm-pre-reloc;
- flash0: n25q00@0 {
- u-boot,dm-pre-reloc;
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "n25q00", "spi-flash";
- reg = <0>; /* chip select */
- spi-max-frequency = <50000000>;
+ compatible = "n25q256a";
+ reg = <0>;
+ spi-max-frequency = <100000000>;
+
m25p,fast-read;
- page-size = <256>;
- block-size = <16>; /* 2^16, 64KB */
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <4>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
cdns,tchsh-ns = <4>;
cdns,tslch-ns = <4>;
+
+ partition@qspi-boot {
+ /* 8MB for raw data. */
+ label = "Flash 0 Raw Data";
+ reg = <0x0 0x800000>;
+ };
+
+ partition@qspi-rootfs {
+ /* 120MB for jffs2 data. */
+ label = "Flash 0 jffs2 Filesystem";
+ reg = <0x800000 0x7800000>;
+ };
};
};
-&uart0 {
- u-boot,dm-pre-reloc;
+&usb1 {
+ status = "okay";
};
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
*/
/dts-v1/;
@@ -19,13 +19,10 @@
};
mmc0: dwmmc0@ff704000 {
- num-slots = <1>;
broken-cd;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
- drvsel = <3>;
- smplsel = <0>;
};
sysmgr@ffd08000 {
@@ -33,3 +30,7 @@
};
};
};
+
+&watchdog0 {
+ status = "okay";
+};
@@ -47,9 +47,20 @@
status = "okay";
};
+&porta {
+ bank-name = "porta";
+};
+
+&portb {
+ bank-name = "portb";
+};
+
+&portc {
+ bank-name = "portc";
+};
+
&mmc0 {
status = "okay";
- bus-width = <4>;
u-boot,dm-pre-reloc;
};
@@ -61,3 +72,7 @@
&uart0 {
u-boot,dm-pre-reloc;
};
+
+&watchdog0 {
+ status = "disabled";
+};
new file mode 100644
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright Altera Corporation (C) 2015
+ * Copyright (c) 2018 Simon Goldschmidt
+ */
+
+/{
+ aliases {
+ udc0 = &usb1;
+ };
+
+ soc {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&watchdog0 {
+ status = "disabled";
+};
+
+&mmc {
+ u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+ clock-frequency = <100000000>;
+ u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+ clock-frequency = <100000000>;
+};
+
+&porta {
+ bank-name = "porta";
+};
+
+&portb {
+ bank-name = "portb";
+};
+
+&portc {
+ bank-name = "portc";
+};
@@ -1,32 +1,43 @@
-// SPDX-License-Identifier: GPL-2.0+
+// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright Altera Corporation (C) 2015
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
*/
#include "socfpga_cyclone5.dtsi"
/ {
- model = "Terasic DE0-Nano(Atlas)";
- compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+ model = "Terasic DE-0(Atlas)";
+ compatible = "terasic,de0-atlas", "altr,socfpga-cyclone5", "altr,socfpga";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "earlyprintk";
stdout-path = "serial0:115200n8";
};
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+
aliases {
ethernet0 = &gmac1;
- udc0 = &usb1;
};
- memory {
- name = "memory";
- device_type = "memory";
- reg = <0x0 0x40000000>; /* 1GB */
+ regulator_3_3v: 3-3-v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
};
- soc {
- u-boot,dm-pre-reloc;
+ leds {
+ compatible = "gpio-leds";
+ hps0 {
+ label = "hps_led0";
+ gpios = <&portb 24 0>;
+ linux,default-trigger = "heartbeat";
+ };
};
};
@@ -34,14 +45,20 @@
status = "okay";
phy-mode = "rgmii";
- rxd0-skew-ps = <420>;
- rxd1-skew-ps = <420>;
- rxd2-skew-ps = <420>;
- rxd3-skew-ps = <420>;
- txen-skew-ps = <0>;
- txc-skew-ps = <1860>;
- rxdv-skew-ps = <420>;
- rxc-skew-ps = <1680>;
+ txd0-skew-ps = <0>; /* -420ps */
+ txd1-skew-ps = <0>; /* -420ps */
+ txd2-skew-ps = <0>; /* -420ps */
+ txd3-skew-ps = <0>; /* -420ps */
+ rxd0-skew-ps = <420>; /* 0ps */
+ rxd1-skew-ps = <420>; /* 0ps */
+ rxd2-skew-ps = <420>; /* 0ps */
+ rxd3-skew-ps = <420>; /* 0ps */
+ txen-skew-ps = <0>; /* -420ps */
+ txc-skew-ps = <1860>; /* 960ps */
+ rxdv-skew-ps = <420>; /* 0ps */
+ rxc-skew-ps = <1680>; /* 780ps */
+
+ max-frame-size = <3800>;
};
&gpio0 {
@@ -58,8 +75,9 @@
&i2c0 {
status = "okay";
+ clock-frequency = <100000>;
- dxl345: adxl345@0 {
+ adxl345: adxl345@53 {
compatible = "adi,adxl345";
reg = <0x53>;
@@ -69,14 +87,15 @@
};
&mmc0 {
+ vmmc-supply = <®ulator_3_3v>;
+ vqmmc-supply = <®ulator_3_3v>;
status = "okay";
- u-boot,dm-pre-reloc;
};
-&usb1 {
+&uart0 {
status = "okay";
};
-&uart0 {
- u-boot,dm-pre-reloc;
+&usb1 {
+ status = "okay";
};
@@ -58,6 +58,18 @@
status = "okay";
};
+&porta {
+ bank-name = "porta";
+};
+
+&portb {
+ bank-name = "portb";
+};
+
+&portc {
+ bank-name = "portc";
+};
+
&mmc0 {
status = "okay";
u-boot,dm-pre-reloc;
@@ -70,3 +82,7 @@
&uart0 {
u-boot,dm-pre-reloc;
};
+
+&watchdog0 {
+ status = "disabled";
+};
@@ -56,6 +56,18 @@
status = "okay";
};
+&porta {
+ bank-name = "porta";
+};
+
+&portb {
+ bank-name = "portb";
+};
+
+&portc {
+ bank-name = "portc";
+};
+
&mmc0 {
status = "okay";
u-boot,dm-pre-reloc;
@@ -68,3 +80,7 @@
&uart0 {
u-boot,dm-pre-reloc;
};
+
+&watchdog0 {
+ status = "disabled";
+};
@@ -55,6 +55,10 @@
status = "okay";
};
+&porta {
+ bank-name = "porta";
+};
+
&i2c0 {
status = "okay";
@@ -107,3 +111,7 @@
&uart0 {
u-boot,dm-pre-reloc;
};
+
+&watchdog0 {
+ status = "disabled";
+};
new file mode 100644
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * Copyright (c) 2018 Simon Goldschmidt
+ */
+
+/{
+ aliases {
+ spi0 = "/soc/spi@ff705000";
+ udc0 = &usb1;
+ };
+
+ soc {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&watchdog0 {
+ status = "disabled";
+};
+
+&mmc {
+ u-boot,dm-pre-reloc;
+};
+
+&qspi {
+ u-boot,dm-pre-reloc;
+};
+
+&flash0 {
+ compatible = "n25q00", "spi-flash";
+ u-boot,dm-pre-reloc;
+
+ partition@qspi-boot {
+ /* 8MB for raw data. */
+ label = "Flash 0 Raw Data";
+ reg = <0x0 0x800000>;
+ };
+
+ partition@qspi-rootfs {
+ /* 120MB for jffs2 data. */
+ label = "Flash 0 jffs2 Filesystem";
+ reg = <0x800000 0x7800000>;
+ };
+};
+
+&uart0 {
+ clock-frequency = <100000000>;
+ u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+ clock-frequency = <100000000>;
+};
+
+&porta {
+ bank-name = "porta";
+};
+
+&portb {
+ bank-name = "portb";
+};
+
+&portc {
+ bank-name = "portc";
+};
@@ -1,31 +1,53 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
*/
#include "socfpga_cyclone5.dtsi"
/ {
model = "Altera SOCFPGA Cyclone V SoC Development Kit";
- compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+ compatible = "altr,socfpga-cyclone5-socdk", "altr,socfpga-cyclone5", "altr,socfpga";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "earlyprintk";
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@0 {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1GB */
};
aliases {
- /* this allow the ethaddr uboot environment variable contents
+ /* this allow the ethaddr uboot environmnet variable contents
* to be added to the gmac1 device tree blob.
*/
ethernet0 = &gmac1;
- udc0 = &usb1;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ hps0 {
+ label = "hps_led0";
+ gpios = <&portb 15 1>;
+ };
+
+ hps1 {
+ label = "hps_led1";
+ gpios = <&portb 14 1>;
+ };
+
+ hps2 {
+ label = "hps_led2";
+ gpios = <&portb 13 1>;
+ };
+
+ hps3 {
+ label = "hps_led3";
+ gpios = <&portb 12 1>;
+ };
};
regulator_3_3v: 3-3-v-regulator {
@@ -34,10 +56,10 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+};
- soc {
- u-boot,dm-pre-reloc;
- };
+&can0 {
+ status = "okay";
};
&gmac1 {
@@ -68,6 +90,14 @@
&i2c0 {
status = "okay";
+ clock-frequency = <100000>;
+
+ /*
+ * adjust the falling times to decrease the i2c frequency to 50Khz
+ * because the LCD module does not work at the standard 100Khz
+ */
+ i2c-sda-falling-time-ns = <5000>;
+ i2c-scl-falling-time-ns = <5000>;
eeprom@51 {
compatible = "atmel,24c32";
@@ -82,39 +112,55 @@
};
&mmc0 {
- status = "okay";
- u-boot,dm-pre-reloc;
-
cd-gpios = <&portb 18 0>;
vmmc-supply = <®ulator_3_3v>;
vqmmc-supply = <®ulator_3_3v>;
+ status = "okay";
};
&qspi {
status = "okay";
- u-boot,dm-pre-reloc;
flash0: n25q00@0 {
- u-boot,dm-pre-reloc;
#address-cells = <1>;
#size-cells = <1>;
- compatible = "n25q00", "spi-flash";
- reg = <0>; /* chip select */
+ compatible = "n25q00";
+ reg = <0>; /* chip select */
spi-max-frequency = <100000000>;
+
m25p,fast-read;
- page-size = <256>;
- block-size = <16>; /* 2^16, 64KB */
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <4>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
cdns,tchsh-ns = <4>;
cdns,tslch-ns = <4>;
+
+ partition@qspi-boot {
+ /* 8MB for raw data. */
+ label = "Flash 0 Raw Data";
+ reg = <0x0 0x800000>;
+ };
+
+ partition@qspi-rootfs {
+ /* 120MB for jffs2 data. */
+ label = "Flash 0 jffs2 Filesystem";
+ reg = <0x800000 0x7800000>;
+ };
};
};
-&usb1 {
+&spi0 {
status = "okay";
+
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
};
-&uart0 {
- u-boot,dm-pre-reloc;
+&usb1 {
+ status = "okay";
};
new file mode 100644
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ * Copyright (c) 2018 Simon Goldschmidt
+ */
+
+/{
+ aliases {
+ spi0 = "/soc/spi@ff705000";
+ udc0 = &usb1;
+ };
+
+ soc {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&watchdog0 {
+ status = "disabled";
+};
+
+&mmc {
+ u-boot,dm-pre-reloc;
+};
+
+&qspi {
+ u-boot,dm-pre-reloc;
+};
+
+&flash {
+ compatible = "n25q00", "spi-flash";
+ u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+ clock-frequency = <100000000>;
+ u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+ clock-frequency = <100000000>;
+};
+
+&porta {
+ bank-name = "porta";
+};
+
+&portb {
+ bank-name = "portb";
+};
+
+&portc {
+ bank-name = "portc";
+};
@@ -1,32 +1,121 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
*/
#include "socfpga_cyclone5.dtsi"
/ {
model = "Terasic SoCkit";
- compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+ compatible = "terasic,socfpga-cyclone5-sockit", "altr,socfpga-cyclone5", "altr,socfpga";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "earlyprintk";
stdout-path = "serial0:115200n8";
};
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+
aliases {
+ /* this allow the ethaddr uboot environmnet variable contents
+ * to be added to the gmac1 device tree blob.
+ */
ethernet0 = &gmac1;
- udc0 = &usb1;
};
- memory {
- name = "memory";
- device_type = "memory";
- reg = <0x0 0x40000000>; /* 1GB */
+ leds {
+ compatible = "gpio-leds";
+
+ hps_led0 {
+ label = "hps:blue:led0";
+ gpios = <&portb 24 0>; /* HPS_GPIO53 */
+ linux,default-trigger = "heartbeat";
+ };
+
+ hps_led1 {
+ label = "hps:blue:led1";
+ gpios = <&portb 25 0>; /* HPS_GPIO54 */
+ linux,default-trigger = "heartbeat";
+ };
+
+ hps_led2 {
+ label = "hps:blue:led2";
+ gpios = <&portb 26 0>; /* HPS_GPIO55 */
+ linux,default-trigger = "heartbeat";
+ };
+
+ hps_led3 {
+ label = "hps:blue:led3";
+ gpios = <&portb 27 0>; /* HPS_GPIO56 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ hps_sw0 {
+ label = "hps_sw0";
+ gpios = <&portc 20 0>; /* HPS_GPI7 */
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0x0>; /* SW_LID */
+ };
+
+ hps_sw1 {
+ label = "hps_sw1";
+ gpios = <&portc 19 0>; /* HPS_GPI6 */
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0x5>; /* SW_DOCK */
+ };
+
+ hps_sw2 {
+ label = "hps_sw2";
+ gpios = <&portc 18 0>; /* HPS_GPI5 */
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0xa>; /* SW_KEYPAD_SLIDE */
+ };
+
+ hps_sw3 {
+ label = "hps_sw3";
+ gpios = <&portc 17 0>; /* HPS_GPI4 */
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0xc>; /* SW_ROTATE_LOCK */
+ };
+
+ hps_hkey0 {
+ label = "hps_hkey0";
+ gpios = <&portc 21 1>; /* HPS_GPI8 */
+ linux,code = <187>; /* KEY_F17 */
+ };
+
+ hps_hkey1 {
+ label = "hps_hkey1";
+ gpios = <&portc 22 1>; /* HPS_GPI9 */
+ linux,code = <188>; /* KEY_F18 */
+ };
+
+ hps_hkey2 {
+ label = "hps_hkey2";
+ gpios = <&portc 23 1>; /* HPS_GPI10 */
+ linux,code = <189>; /* KEY_F19 */
+ };
+
+ hps_hkey3 {
+ label = "hps_hkey3";
+ gpios = <&portc 24 1>; /* HPS_GPI11 */
+ linux,code = <190>; /* KEY_F20 */
+ };
};
- soc {
- u-boot,dm-pre-reloc;
+ regulator_3_3v: vcc3p3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
};
};
@@ -44,46 +133,50 @@
rxc-skew-ps = <2000>;
};
-&gpio0 {
+&gpio0 { /* GPIO 0..29 */
status = "okay";
};
-&gpio1 {
+&gpio1 { /* GPIO 30..57 */
status = "okay";
};
-&gpio2 {
+&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */
status = "okay";
};
-&i2c0 {
+&i2c1 {
status = "okay";
- rtc: rtc@68 {
- compatible = "stm,m41t82";
- reg = <0x68>;
+ accel1: accelerometer@53 {
+ compatible = "adi,adxl345";
+ reg = <0x53>;
+
+ interrupt-parent = <&portc>;
+ interrupts = <3 2>;
};
};
&mmc0 {
+ vmmc-supply = <®ulator_3_3v>;
+ vqmmc-supply = <®ulator_3_3v>;
status = "okay";
- u-boot,dm-pre-reloc;
};
&qspi {
status = "okay";
- u-boot,dm-pre-reloc;
- flash0: n25q00@0 {
- u-boot,dm-pre-reloc;
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "n25q00", "spi-flash";
- reg = <0>; /* chip select */
- spi-max-frequency = <50000000>;
+ compatible = "n25q00";
+ reg = <0>;
+ spi-max-frequency = <100000000>;
+
m25p,fast-read;
- page-size = <256>;
- block-size = <16>; /* 2^16, 64KB */
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <4>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
cdns,tchsh-ns = <4>;
@@ -94,7 +187,3 @@
&usb1 {
status = "okay";
};
-
-&uart0 {
- u-boot,dm-pre-reloc;
-};
new file mode 100644
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ * Copyright (c) 2018 Simon Goldschmidt
+ */
+
+/{
+ aliases {
+ spi0 = "/soc/spi@ff705000";
+ udc0 = &usb1;
+ };
+
+ soc {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&watchdog0 {
+ status = "disabled";
+};
+
+&mmc {
+ u-boot,dm-pre-reloc;
+};
+
+&qspi {
+ u-boot,dm-pre-reloc;
+};
+
+&flash {
+ compatible = "n25q256a", "spi-flash";
+ u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+ clock-frequency = <100000000>;
+ u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+ clock-frequency = <100000000>;
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&porta {
+ bank-name = "porta";
+};
+
+&portb {
+ bank-name = "portb";
+};
+
+&portc {
+ bank-name = "portc";
+};
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
*/
#include "socfpga_cyclone5.dtsi"
@@ -9,83 +9,86 @@
model = "EBV SOCrates";
compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga";
- chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = "serial0:115200n8";
- };
-
aliases {
- /*
- * This allows the ethaddr uboot environment variable
- * contents to be added to the gmac1 device tree blob.
- */
ethernet0 = &gmac1;
- udc0 = &usb1;
};
- memory {
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1GB */
};
- soc {
- u-boot,dm-pre-reloc;
+ leds: gpio-leds {
};
};
&gmac1 {
- status = "okay";
phy-mode = "rgmii";
+ status = "okay";
+};
+
+&gpio0 {
+ status = "okay";
+};
- rxd0-skew-ps = <0>;
- rxd1-skew-ps = <0>;
- rxd2-skew-ps = <0>;
- rxd3-skew-ps = <0>;
- txen-skew-ps = <0>;
- txc-skew-ps = <2600>;
- rxdv-skew-ps = <0>;
- rxc-skew-ps = <2000>;
+&gpio1 {
+ status = "okay";
};
&i2c0 {
status = "okay";
rtc: rtc@68 {
- compatible = "stm,m41t82";
+ compatible = "st,m41t82";
reg = <0x68>;
};
};
-&mmc0 {
+&leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "led:green:heartbeat";
+ gpios = <&porta 28 1>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1 {
+ label = "led:green:D7";
+ gpios = <&portb 19 1>;
+ };
+
+ led2 {
+ label = "led:green:D8";
+ gpios = <&portb 25 1>;
+ };
+};
+
+&mmc {
status = "okay";
- u-boot,dm-pre-reloc;
};
&qspi {
status = "okay";
- flash0: n25q00@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "n25q00", "spi-flash";
- reg = <0>; /* chip select */
- spi-max-frequency = <50000000>;
+ compatible = "n25q256a";
+ reg = <0>;
+ spi-max-frequency = <100000000>;
m25p,fast-read;
- page-size = <256>;
- block-size = <16>; /* 2^16, 64KB */
+ cdns,read-delay = <4>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
cdns,tchsh-ns = <4>;
cdns,tslch-ns = <4>;
+ status = "okay";
};
};
-
-&usb1 {
- disable-over-current;
- status = "okay";
-};
-
-&uart0 {
- u-boot,dm-pre-reloc;
-};
@@ -50,6 +50,18 @@
status = "okay";
};
+&porta {
+ bank-name = "porta";
+};
+
+&portb {
+ bank-name = "portb";
+};
+
+&portc {
+ bank-name = "portc";
+};
+
&i2c0 {
status = "okay";
speed-mode = <0>;
new file mode 100644
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * U-Boot additions
+ *
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ * Copyright (c) 2018 Simon Goldschmidt
+ */
+
+/{
+ aliases {
+ spi0 = "/soc/spi@ff705000";
+ udc0 = &usb0;
+ };
+
+ soc {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&watchdog0 {
+ status = "disabled";
+};
+
+&mmc {
+ u-boot,dm-pre-reloc;
+};
+
+&qspi {
+ u-boot,dm-pre-reloc;
+
+ n25q128@0 {
+ compatible = "n25q128", "spi-flash";
+ u-boot,dm-pre-reloc;
+ };
+ n25q00@1 {
+ compatible = "n25q00", "spi-flash";
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&uart0 {
+ clock-frequency = <100000000>;
+ u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+ clock-frequency = <100000000>;
+};
+
+&porta {
+ bank-name = "porta";
+};
+
+&portb {
+ bank-name = "portb";
+};
+
+&portc {
+ bank-name = "portc";
+};
@@ -1,100 +1,238 @@
-// SPDX-License-Identifier: GPL-2.0+
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
/*
* Copyright (C) 2015 Marek Vasut <marex@denx.de>
*/
#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "samtec VIN|ING FPGA";
- compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+ compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "earlyprintk";
stdout-path = "serial0:115200n8";
};
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+
aliases {
+ /*
+ * This allow the ethaddr uboot environment variable contents
+ * to be added to the gmac1 device tree blob.
+ */
ethernet0 = &gmac1;
- udc0 = &usb0;
+ ethernet1 = &gmac0;
};
- memory {
- name = "memory";
- device_type = "memory";
- reg = <0x0 0x40000000>; /* 1GB */
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ hps_temp0 {
+ label = "BTN_0"; /* TEMP_OS */
+ gpios = <&portc 18 GPIO_ACTIVE_LOW>; /* HPS_GPIO60 */
+ linux,code = <BTN_0>;
+ };
+
+ hps_hkey0 {
+ label = "BTN_1"; /* DIS_PWR */
+ gpios = <&portc 19 GPIO_ACTIVE_LOW>; /* HPS_GPIO61 */
+ linux,code = <BTN_1>;
+ };
+
+ hps_hkey1 {
+ label = "hps_hkey1"; /* POWER_DOWN */
+ gpios = <&portc 20 GPIO_ACTIVE_LOW>; /* HPS_GPIO62 */
+ linux,code = <KEY_POWER>;
+ };
};
- soc {
- u-boot,dm-pre-reloc;
+ regulator-usb-nrst {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_nrst";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&portb 5 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ regulator-always-on;
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+
+ snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <10000 10000 10000>;
- rxd0-skew-ps = <0>;
- rxd1-skew-ps = <0>;
- rxd2-skew-ps = <0>;
- rxd3-skew-ps = <0>;
- txen-skew-ps = <0>;
- txc-skew-ps = <2600>;
- rxdv-skew-ps = <0>;
- rxc-skew-ps = <2000>;
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txen-skew-ps = <0>;
+ txc-skew-ps = <2600>;
+ rxdv-skew-ps = <0>;
+ rxc-skew-ps = <2000>;
+ };
+ };
};
-&gpio0 {
+&gpio0 { /* GPIO 0..29 */
status = "okay";
};
-&gpio1 {
+&gpio1 { /* GPIO 30..57 */
status = "okay";
};
-&gpio2 {
+&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */
status = "okay";
};
&i2c0 {
status = "okay";
- rtc: rtc@68 {
- compatible = "stm,m41t82";
- reg = <0x68>;
+ gpio: pca9557@1f {
+ compatible = "nxp,pca9557";
+ reg = <0x1f>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ temp: lm75@48 {
+ compatible = "lm75";
+ reg = <0x48>;
+ };
+
+ at24@50 {
+ compatible = "atmel,24c01";
+ pagesize = <8>;
+ reg = <0x50>;
+ };
+
+ i2cswitch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c@6 { /* Backplane EEPROM */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ eeprom@51 {
+ compatible = "atmel,24c01";
+ pagesize = <8>;
+ reg = <0x51>;
+ };
+ };
+
+ i2c@7 { /* Power board EEPROM */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ eeprom@51 {
+ compatible = "atmel,24c01";
+ pagesize = <8>;
+ reg = <0x51>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ at24@50 {
+ compatible = "atmel,24c02";
+ pagesize = <8>;
+ reg = <0x50>;
};
};
&qspi {
status = "okay";
- u-boot,dm-pre-reloc;
- flash0: n25q128@0 {
- u-boot,dm-pre-reloc;
+ n25q128@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "n25q128", "spi-flash";
- reg = <0>; /* chip select */
- spi-max-frequency = <50000000>;
+ compatible = "n25q128";
+ reg = <0>; /* chip select */
+ spi-max-frequency = <100000000>;
m25p,fast-read;
- page-size = <256>;
- block-size = <16>; /* 2^16, 64KB */
+
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <4>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
cdns,tchsh-ns = <4>;
cdns,tslch-ns = <4>;
};
- flash1: n25q00@1 {
- u-boot,dm-pre-reloc;
+ n25q00@1 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "n25q00", "spi-flash";
- reg = <1>; /* chip select */
- spi-max-frequency = <50000000>;
+ compatible = "n25q00";
+ reg = <1>; /* chip select */
+ spi-max-frequency = <100000000>;
m25p,fast-read;
- page-size = <256>;
- block-size = <16>; /* 2^16, 64KB */
+
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <4>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
cdns,tchsh-ns = <4>;
@@ -103,13 +241,11 @@
};
&usb0 {
+ dr_mode = "host";
status = "okay";
};
&usb1 {
+ dr_mode = "peripheral";
status = "okay";
};
-
-&uart0 {
- u-boot,dm-pre-reloc;
-};
Add -u-boot.dtsi files to keep the current U-Boot behaviour: - add u-boot,dm-pre-reloc where required - disable watchdog - set uart clock frequency - add gpio bank-name properties where appropriate: - make qspi work (add alias for spi0, fix compatible for flash) - enable usb (status okay, add alias for udc0) Adapt board dts files that are not in Linux to keep their old behaviour. Change licenses to SPDX. (Patman warnings/errors are in 1:1 copied files from Linux) Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> --- Changes in v2: - "cadence,qspi" to "cdns,qspi-nor" change in socfpga.dtsi moved to patch 2 arch/arm/dts/socfpga.dtsi | 402 ++++++++++++------ arch/arm/dts/socfpga_arria5.dtsi | 11 +- arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi | 56 +++ arch/arm/dts/socfpga_arria5_socdk.dts | 97 +++-- arch/arm/dts/socfpga_cyclone5.dtsi | 9 +- arch/arm/dts/socfpga_cyclone5_dbm_soc1.dts | 17 +- .../socfpga_cyclone5_de0_nano_soc-u-boot.dtsi | 46 ++ .../arm/dts/socfpga_cyclone5_de0_nano_soc.dts | 69 +-- arch/arm/dts/socfpga_cyclone5_de10_nano.dts | 16 + arch/arm/dts/socfpga_cyclone5_de1_soc.dts | 16 + arch/arm/dts/socfpga_cyclone5_is1.dts | 8 + .../dts/socfpga_cyclone5_socdk-u-boot.dtsi | 72 ++++ arch/arm/dts/socfpga_cyclone5_socdk.dts | 88 +++- .../dts/socfpga_cyclone5_sockit-u-boot.dtsi | 56 +++ arch/arm/dts/socfpga_cyclone5_sockit.dts | 149 +++++-- .../dts/socfpga_cyclone5_socrates-u-boot.dtsi | 60 +++ arch/arm/dts/socfpga_cyclone5_socrates.dts | 85 ++-- arch/arm/dts/socfpga_cyclone5_sr1500.dts | 12 + .../socfpga_cyclone5_vining_fpga-u-boot.dtsi | 60 +++ arch/arm/dts/socfpga_cyclone5_vining_fpga.dts | 222 ++++++++-- 20 files changed, 1222 insertions(+), 329 deletions(-) create mode 100644 arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi create mode 100644 arch/arm/dts/socfpga_cyclone5_de0_nano_soc-u-boot.dtsi create mode 100644 arch/arm/dts/socfpga_cyclone5_socdk-u-boot.dtsi create mode 100644 arch/arm/dts/socfpga_cyclone5_sockit-u-boot.dtsi create mode 100644 arch/arm/dts/socfpga_cyclone5_socrates-u-boot.dtsi create mode 100644 arch/arm/dts/socfpga_cyclone5_vining_fpga-u-boot.dtsi