| Message ID | 20160826140155.1364-1-hdegoede@redhat.com |
|---|---|
| State | Accepted |
| Delegated to: | Hans de Goede |
| Headers | show |
>>>>> "Hans" == Hans de Goede <hdegoede@redhat.com> writes: > When the backlight's pwm input is connected to a pwm output of the SoC, > actually use pwm to drive the backlight. > The mean reason for doing this is to fix the backlight turning off > for aprox. 1 second while the kernel is booting. This is caused by > the kernel actually using pwm to drive the backlight, so that it > can dim the backlight. First the pwm driver loads and switches the > pinmux for the pin driving the backlight's pwm input to the pwm > controller. Then about 1s later the actual backlight driver loads > and tells the pwm driver to actually update the pwm settings, which > have a power-on-reset value of "off". > An additional advantage is that this allows us to initatiate the > backlight at 80%, which is the kernel default, avoiding a brightness > change while the kernel loads. > +++ b/drivers/video/sunxi_display.c > @@ -12,6 +12,7 @@ > #include <asm/arch/clock.h> > #include <asm/arch/display.h> > #include <asm/arch/gpio.h> > +#include <asm/arch/pwm.h> > #include <asm/global_data.h> > #include <asm/gpio.h> > #include <asm/io.h> > @@ -34,7 +35,6 @@ > #define PWM_ON 1 > #define PWM_OFF 0 > #endif > - Unrelated white space change. Other than that: Reviewed by: Peter Korsgaard <peter@korsgaard.com>
Hi, On 26-08-16 16:15, Peter Korsgaard wrote: >>>>>> "Hans" == Hans de Goede <hdegoede@redhat.com> writes: > > > When the backlight's pwm input is connected to a pwm output of the SoC, > > actually use pwm to drive the backlight. > > > The mean reason for doing this is to fix the backlight turning off > > for aprox. 1 second while the kernel is booting. This is caused by > > the kernel actually using pwm to drive the backlight, so that it > > can dim the backlight. First the pwm driver loads and switches the > > pinmux for the pin driving the backlight's pwm input to the pwm > > controller. Then about 1s later the actual backlight driver loads > > and tells the pwm driver to actually update the pwm settings, which > > have a power-on-reset value of "off". > > > An additional advantage is that this allows us to initatiate the > > backlight at 80%, which is the kernel default, avoiding a brightness > > change while the kernel loads. > > > +++ b/drivers/video/sunxi_display.c > > @@ -12,6 +12,7 @@ > > #include <asm/arch/clock.h> > > #include <asm/arch/display.h> > > #include <asm/arch/gpio.h> > > +#include <asm/arch/pwm.h> > > #include <asm/global_data.h> > > #include <asm/gpio.h> > > #include <asm/io.h> > > @@ -34,7 +35,6 @@ > > #define PWM_ON 1 > > #define PWM_OFF 0 > > #endif > > - > > Unrelated white space change. Other than that: Oops, fixed locally. > Reviewed by: Peter Korsgaard <peter@korsgaard.com> Thank you. Regards, Hans
Hi Hans, On 26 August 2016 at 08:21, Hans de Goede <hdegoede@redhat.com> wrote: > Hi, > > > On 26-08-16 16:15, Peter Korsgaard wrote: >>>>>>> >>>>>>> "Hans" == Hans de Goede <hdegoede@redhat.com> writes: >> >> >> > When the backlight's pwm input is connected to a pwm output of the SoC, >> > actually use pwm to drive the backlight. >> >> > The mean reason for doing this is to fix the backlight turning off >> > for aprox. 1 second while the kernel is booting. This is caused by >> > the kernel actually using pwm to drive the backlight, so that it >> > can dim the backlight. First the pwm driver loads and switches the >> > pinmux for the pin driving the backlight's pwm input to the pwm >> > controller. Then about 1s later the actual backlight driver loads >> > and tells the pwm driver to actually update the pwm settings, which >> > have a power-on-reset value of "off". >> >> > An additional advantage is that this allows us to initatiate the >> > backlight at 80%, which is the kernel default, avoiding a brightness >> > change while the kernel loads. >> >> > +++ b/drivers/video/sunxi_display.c >> > @@ -12,6 +12,7 @@ >> > #include <asm/arch/clock.h> >> > #include <asm/arch/display.h> >> > #include <asm/arch/gpio.h> >> > +#include <asm/arch/pwm.h> >> > #include <asm/global_data.h> >> > #include <asm/gpio.h> >> > #include <asm/io.h> >> > @@ -34,7 +35,6 @@ >> > #define PWM_ON 1 >> > #define PWM_OFF 0 >> > #endif >> > - >> >> Unrelated white space change. Other than that: > > > Oops, fixed locally. > >> Reviewed by: Peter Korsgaard <peter@korsgaard.com> > > > Thank you. Can this move to driver model for the PWM, and for the display for that matter? > > Regards, > > Hans > > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot Regards, Simon
On Fri, 2016-08-26 at 16:21 +0200, Hans de Goede wrote: > > > > > Reviewed by: Peter Korsgaard <peter@korsgaard.com> > > Thank you. Acked-by: Ian Campbell <ijc@hellion.org.uk>
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h index cd009d7..5f93830 100644 --- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h +++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h @@ -76,8 +76,15 @@ #define SUNXI_INTC_BASE 0x01c20400 #define SUNXI_PIO_BASE 0x01c20800 #define SUNXI_TIMER_BASE 0x01c20c00 +#ifndef CONFIG_SUNXI_GEN_SUN6I +#define SUNXI_PWM_BASE 0x01c20e00 +#endif #define SUNXI_SPDIF_BASE 0x01c21000 +#ifdef CONFIG_SUNXI_GEN_SUN6I +#define SUNXI_PWM_BASE 0x01c21400 +#else #define SUNXI_AC97_BASE 0x01c21400 +#endif #define SUNXI_IR0_BASE 0x01c21800 #define SUNXI_IR1_BASE 0x01c21c00 diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index bff7d14..85a4ec3 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -150,6 +150,7 @@ enum sunxi_gpio_number { #define SUN6I_GPA_SDC3 4 #define SUN8I_H3_GPA_UART0 2 +#define SUN4I_GPB_PWM 2 #define SUN4I_GPB_TWI0 2 #define SUN4I_GPB_TWI1 2 #define SUN5I_GPB_TWI1 2 @@ -186,6 +187,8 @@ enum sunxi_gpio_number { #define SUN6I_GPG_TWI3 2 #define SUN5I_GPG_UART1 4 +#define SUN6I_GPH_PWM 2 +#define SUN8I_GPH_PWM 2 #define SUN4I_GPH_SDC1 5 #define SUN6I_GPH_TWI0 2 #define SUN8I_GPH_TWI0 2 diff --git a/arch/arm/include/asm/arch-sunxi/pwm.h b/arch/arm/include/asm/arch-sunxi/pwm.h new file mode 100644 index 0000000..5884b5d --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/pwm.h @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2016 Hans de Goede <hdegoede@redhat.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_PWM_H +#define _SUNXI_PWM_H + +#define SUNXI_PWM_CTRL_REG (SUNXI_PWM_BASE + 0) +#define SUNXI_PWM_CH0_PERIOD (SUNXI_PWM_BASE + 4) + +#define SUNXI_PWM_CTRL_PRESCALE0(x) ((x) & 0xf) +#define SUNXI_PWM_CTRL_ENABLE0 (0x5 << 4) +#define SUNXI_PWM_CTRL_POLARITY0(x) ((x) << 5) + +#define SUNXI_PWM_PERIOD_80PCT 0x04af03c0 + +#if defined CONFIG_MACH_SUN4I || defined CONFIG_MACH_SUN5I +#define SUNXI_PWM_PIN0 SUNXI_GPB(2) +#define SUNXI_PWM_MUX SUN4I_GPB_PWM +#endif + +#if defined CONFIG_MACH_SUN6I +#define SUNXI_PWM_PIN0 SUNXI_GPH(13) +#define SUNXI_PWM_MUX SUN6I_GPH_PWM +#endif + +#if defined CONFIG_MACH_SUN8I_A23 || defined CONFIG_MACH_SUN8I_A33 +#define SUNXI_PWM_PIN0 SUNXI_GPH(0) +#define SUNXI_PWM_MUX SUN8I_GPH_PWM +#endif + +#endif diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c index 56f6c8e..00a38f9 100644 --- a/drivers/video/sunxi_display.c +++ b/drivers/video/sunxi_display.c @@ -12,6 +12,7 @@ #include <asm/arch/clock.h> #include <asm/arch/display.h> #include <asm/arch/gpio.h> +#include <asm/arch/pwm.h> #include <asm/global_data.h> #include <asm/gpio.h> #include <asm/io.h> @@ -34,7 +35,6 @@ #define PWM_ON 1 #define PWM_OFF 0 #endif - DECLARE_GLOBAL_DATA_PTR; enum sunxi_monitor { @@ -743,6 +743,16 @@ static void sunxi_lcdc_backlight_enable(void) gpio_direction_output(pin, 1); pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_PWM); +#ifdef SUNXI_PWM_PIN0 + if (pin == SUNXI_PWM_PIN0) { + writel(SUNXI_PWM_CTRL_POLARITY0(PWM_ON) | + SUNXI_PWM_CTRL_ENABLE0 | + SUNXI_PWM_CTRL_PRESCALE0(0xf), SUNXI_PWM_CTRL_REG); + writel(SUNXI_PWM_PERIOD_80PCT, SUNXI_PWM_CH0_PERIOD); + sunxi_gpio_set_cfgpin(pin, SUNXI_PWM_MUX); + return; + } +#endif if (pin >= 0) gpio_direction_output(pin, PWM_ON); }
When the backlight's pwm input is connected to a pwm output of the SoC, actually use pwm to drive the backlight. The mean reason for doing this is to fix the backlight turning off for aprox. 1 second while the kernel is booting. This is caused by the kernel actually using pwm to drive the backlight, so that it can dim the backlight. First the pwm driver loads and switches the pinmux for the pin driving the backlight's pwm input to the pwm controller. Then about 1s later the actual backlight driver loads and tells the pwm driver to actually update the pwm settings, which have a power-on-reset value of "off". An additional advantage is that this allows us to initatiate the backlight at 80%, which is the kernel default, avoiding a brightness change while the kernel loads. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Changes in v2: -Fix pwm mmio base-address being wrong for sun6i / sun8i -Add support for pwm on sun6i --- arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 7 ++++++ arch/arm/include/asm/arch-sunxi/gpio.h | 3 +++ arch/arm/include/asm/arch-sunxi/pwm.h | 34 +++++++++++++++++++++++++++++ drivers/video/sunxi_display.c | 12 +++++++++- 4 files changed, 55 insertions(+), 1 deletion(-) create mode 100644 arch/arm/include/asm/arch-sunxi/pwm.h