diff mbox series

driver: net: fm: add support for XFI

Message ID 1599809049-12547-1-git-send-email-madalin.bucur@oss.nxp.com
State Accepted
Commit 858056b0e00ba4abe6f85ed1043816d69e05a99f
Delegated to: Priyanka Jain
Headers show
Series driver: net: fm: add support for XFI | expand

Commit Message

Madalin Bucur (OSS) Sept. 11, 2020, 7:24 a.m. UTC 
All the 10G ports that were working in XFI mode were described as
using XGMII (as PHY_INTERFACE_MODE_XFI was not added at the time).
Add the minimal changes required for the FMan code to support XFI.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
---
 drivers/net/fm/memac.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c
index 0f0f7b0..36f50d2 100644
--- a/drivers/net/fm/memac.c
+++ b/drivers/net/fm/memac.c
@@ -98,6 +98,7 @@  static void memac_set_interface_mode(struct fsl_enet_mac *mac,
 		if_mode &= ~IF_MODE_MASK;
 		if_mode |= (IF_MODE_GMII);
 		break;
+	case PHY_INTERFACE_MODE_XFI:
 	case PHY_INTERFACE_MODE_XGMII:
 		if_mode &= ~IF_MODE_MASK;
 		if_mode |= IF_MODE_XGMII;
@@ -106,7 +107,7 @@  static void memac_set_interface_mode(struct fsl_enet_mac *mac,
 		break;
 	}
 	/* Enable automatic speed selection for Non-XGMII */
-	if (type != PHY_INTERFACE_MODE_XGMII)
+	if (type != PHY_INTERFACE_MODE_XGMII && type != PHY_INTERFACE_MODE_XFI)
 		if_mode |= IF_MODE_EN_AUTO;
 
 	if (type == PHY_INTERFACE_MODE_RGMII ||