diff mbox series

[v10,2/2] board: presidio-asic: Add SPI NOR support

Message ID 1596138766-24144-2-git-send-email-alex.nemirovsky@cortina-access.com
State Under Review
Delegated to: Jagannadha Sutradharudu Teki
Headers show
Series [v10,1/2] spi: ca_sflash: Add CAxxxx SPI Flash Controller | expand

Commit Message

Alex Nemirovsky July 30, 2020, 7:52 p.m. UTC
Add SPI NOR support for Cortina Access
Presidio Engineering Board

Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
CC: Jagan Teki <jagan@amarulasolutions.com>
CC: Vignesh R <vigneshr@ti.com>
CC: Tom Rini <trini@konsulko.com>

Add err processing while probe sf device

---

Changes in v10:
- Change forced driver probe call to error handling check

Changes in v6:
- None

Changes in v5:
- NAND support removed from presidio-asic board DT.

Changes in v4:
- None

Changes in v2:
- None

 arch/arm/dts/ca-presidio-engboard.dts            |  6 +--
 board/cortina/presidio-asic/presidio.c           | 17 ++++++-
 configs/cortina_presidio-asic-spi-nand_defconfig | 48 +++++++++++++++++++
 configs/cortina_presidio-asic-spi-nor_defconfig  | 59 ++++++++++++++++++++++++
 4 files changed, 125 insertions(+), 5 deletions(-)
 create mode 100644 configs/cortina_presidio-asic-spi-nand_defconfig
 create mode 100644 configs/cortina_presidio-asic-spi-nor_defconfig

Comments

Jagan Teki Oct. 24, 2020, 3:15 p.m. UTC | #1
On Fri, Jul 31, 2020 at 1:23 AM Alex Nemirovsky
<alex.nemirovsky@cortina-access.com> wrote:
>
> Add SPI NOR support for Cortina Access
> Presidio Engineering Board
>
> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
> CC: Jagan Teki <jagan@amarulasolutions.com>
> CC: Vignesh R <vigneshr@ti.com>
> CC: Tom Rini <trini@konsulko.com>
>
> Add err processing while probe sf device
>
> ---
>
> Changes in v10:
> - Change forced driver probe call to error handling check

Look like you sent v10 w/o answering v7. Please check.

Jagan.
diff mbox series

Patch

diff --git a/arch/arm/dts/ca-presidio-engboard.dts b/arch/arm/dts/ca-presidio-engboard.dts
index 40c93d7..b04b33e 100644
--- a/arch/arm/dts/ca-presidio-engboard.dts
+++ b/arch/arm/dts/ca-presidio-engboard.dts
@@ -53,15 +53,13 @@ 
 	};
 
 	sflash: sflash-controller@f4324000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
 		compatible = "cortina,ca-sflash";
 		reg = <0x0 0xf4324000 0x50>;
 		reg-names = "sflash-regs";
 		flash@0 {
 			compatible = "jedec,spi-nor";
-			spi-rx-bus-width = <1>;
-			spi-max-frequency = <108000000>;
+			spi-rx-bus-width = <4>;
+			spi-tx-bus-width = <4>;
 		};
 	};
 };
diff --git a/board/cortina/presidio-asic/presidio.c b/board/cortina/presidio-asic/presidio.c
index 3c132f1..2f1a966 100644
--- a/board/cortina/presidio-asic/presidio.c
+++ b/board/cortina/presidio-asic/presidio.c
@@ -16,7 +16,7 @@ 
 #include <asm/psci.h>
 #include <cpu_func.h>
 #include <asm/armv8/mmu.h>
-
+#include <dm/uclass.h>
 DECLARE_GLOBAL_DATA_PTR;
 
 #define CA_PERIPH_BASE                  0xE0000000UL
@@ -72,9 +72,24 @@  static noinline int invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1,
 	return function_id;
 }
 
+static int init_sflash(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	ret = uclass_first_device_err(UCLASS_SPI, &dev);
+	if (ret && ret != -ENODEV) {
+		printf("sflash device found err! %d\n", ret);
+		return -1;
+	}
+	return 0;
+}
+
 int board_early_init_r(void)
 {
 	dcache_disable();
+	if (IS_ENABLED(CONFIG_CORTINA_SFLASH))
+		init_sflash();
 	return 0;
 }
 
diff --git a/configs/cortina_presidio-asic-spi-nand_defconfig b/configs/cortina_presidio-asic-spi-nand_defconfig
new file mode 100644
index 0000000..515ad22
--- /dev/null
+++ b/configs/cortina_presidio-asic-spi-nand_defconfig
@@ -0,0 +1,48 @@ 
+CONFIG_ARM=y
+# CONFIG_SYS_ARCH_TIMER is not set
+CONFIG_TARGET_PRESIDIO_ASIC=y
+CONFIG_SYS_TEXT_BASE=0x04000000
+CONFIG_ENV_SIZE=0x20000
+CONFIG_DM_GPIO=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_IDENT_STRING="Presidio-SoC"
+CONFIG_SHOW_BOOT_PROGRESS=y
+CONFIG_BOOTDELAY=3
+CONFIG_LOGLEVEL=7
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SYS_PROMPT="G3#"
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_WDT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_SMC=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
+# CONFIG_NET is not set
+CONFIG_DM=y
+CONFIG_CORTINA_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_CA=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_CORTINA=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_DM_SERIAL=y
+CONFIG_CORTINA_UART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CORTINA_SFLASH=y
+CONFIG_WDT=y
+CONFIG_WDT_CORTINA=y
diff --git a/configs/cortina_presidio-asic-spi-nor_defconfig b/configs/cortina_presidio-asic-spi-nor_defconfig
new file mode 100644
index 0000000..d7ecec3
--- /dev/null
+++ b/configs/cortina_presidio-asic-spi-nor_defconfig
@@ -0,0 +1,59 @@ 
+CONFIG_ARM=y
+# CONFIG_SYS_ARCH_TIMER is not set
+CONFIG_TARGET_PRESIDIO_ASIC=y
+CONFIG_SYS_TEXT_BASE=0x04000000
+CONFIG_ENV_SIZE=0x20000
+CONFIG_DM_GPIO=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_IDENT_STRING="Presidio-SoC"
+CONFIG_SHOW_BOOT_PROGRESS=y
+CONFIG_BOOTDELAY=3
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SYS_PROMPT="G3#"
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_WDT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_SMC=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
+# CONFIG_NET is not set
+CONFIG_DM=y
+CONFIG_CORTINA_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_CA=y
+CONFIG_LED=y
+CONFIG_LED_CORTINA=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_CORTINA=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_EON=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_ISSI=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_XMC=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_DM_SERIAL=y
+CONFIG_CORTINA_UART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CORTINA_SFLASH=y
+CONFIG_WDT=y
+CONFIG_WDT_CORTINA=y