diff mbox series

[U-Boot,v2,4/6] arm: mvebu: helios4: Reduce U-Boot image size

Message ID 1543546499-106725-5-git-send-email-aditya@kobol.io
State Superseded
Delegated to: Stefan Roese
Headers show
Series Update support for Helios4 board | expand

Commit Message

Aditya Prayoga Nov. 30, 2018, 2:54 a.m. UTC 
Remove unused I2C support in SPL and use simple_malloc functions to
reduce SPL image size.
Since Helios4 does not have any PCIe allocated on SerDes, remove PCI
support. MTD layer on top of SPI flash is not needed, remove it also.

Signed-off-by: Aditya Prayoga <aditya@kobol.io>
---
 configs/helios4_defconfig | 5 +----
 include/configs/helios4.h | 6 ------
 2 files changed, 1 insertion(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/configs/helios4_defconfig b/configs/helios4_defconfig
index 69dd774..53995fe 100644
--- a/configs/helios4_defconfig
+++ b/configs/helios4_defconfig
@@ -8,6 +8,7 @@  CONFIG_TARGET_HELIOS4=y
 CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xd0012000
 CONFIG_DEBUG_UART_CLOCK=250000000
@@ -20,12 +21,10 @@  CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x141
-CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
@@ -52,11 +51,9 @@  CONFIG_MMC_SDHCI_MV=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_SPI_FLASH_MTD=y
 CONFIG_PHY_GIGE=y
 CONFIG_MVNETA=y
 CONFIG_MII=y
-CONFIG_PCI=y
 CONFIG_SCSI=y
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y
diff --git a/include/configs/helios4.h b/include/configs/helios4.h
index c71055f..e665340 100644
--- a/include/configs/helios4.h
+++ b/include/configs/helios4.h
@@ -54,12 +54,6 @@ 
 #define CONFIG_PHY_MARVELL		/* there is a marvell phy */
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-/* PCIe support */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define RELOCATION_LIMITS_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\