Message ID | 1534875507-2531-7-git-send-email-jagdish.gediya@nxp.com |
---|---|
State | Superseded |
Delegated to: | York Sun |
Headers | show |
Series | Device Tree support for PowerPC in u-boot | expand |
On Wed, Aug 22, 2018 at 2:18 AM, Jagdish Gediya <jagdish.gediya@nxp.com> wrote: > add required binman node inside dts to use binman to prepare nits: Add > u-boot-dtb.bin > > Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> > --- > arch/powerpc/dts/mpc85xx-u-boot.dtsi | 16 ++++++++++++++++ > arch/powerpc/dts/u-boot.dtsi | 31 +++++++++++++++++++++++++++++++ > 2 files changed, 47 insertions(+) > create mode 100644 arch/powerpc/dts/mpc85xx-u-boot.dtsi > create mode 100644 arch/powerpc/dts/u-boot.dtsi > > diff --git a/arch/powerpc/dts/mpc85xx-u-boot.dtsi b/arch/powerpc/dts/mpc85xx-u-boot.dtsi > new file mode 100644 > index 0000000..637db11 > --- /dev/null > +++ b/arch/powerpc/dts/mpc85xx-u-boot.dtsi > @@ -0,0 +1,16 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2018 NXP > + */ > + > +#include <u-boot.dtsi> > + > +/ { > +#if defined(CONFIG_BINMAN) > + binman { > + u-boot-with-ucode-ptr { > + optional-ucode; > + }; > + }; > +#endif Please merge this into the u-boot.dtsi, as you already used the #ifdef there for MPC85xx only. > +}; > diff --git a/arch/powerpc/dts/u-boot.dtsi b/arch/powerpc/dts/u-boot.dtsi > new file mode 100644 > index 0000000..ebe160f > --- /dev/null > +++ b/arch/powerpc/dts/u-boot.dtsi > @@ -0,0 +1,31 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2018 NXP > + */ > + > +#include <config.h> > + > +/ { > +#if defined(CONFIG_BINMAN) && defined(CONFIG_MPC85xx) > + binman { > + filename = "u-boot-dtb.bin"; > + start-pos = <CONFIG_SYS_TEXT_BASE>; > + sort-by-pos; > + pad-byte = <0xff>; > + size = <CONFIG_SYS_MONITOR_LEN>; > + > + u-boot-with-ucode-ptr { > + offset = <CONFIG_SYS_TEXT_BASE>; > + }; > + > + u-boot-dtb-with-ucode { > + align = <256>; > + }; > +#if !defined(CONFIG_SYS_MPC85XX_NO_RESETVEC) && !defined(CONFIG_NAND) > + mpc85xx-bootpg-resetvec { > + offset = <(CONFIG_RESET_VECTOR_ADDRESS - 0xffc)>; > + }; > +#endif > + }; > +#endif > +}; > Regards, Bin
diff --git a/arch/powerpc/dts/mpc85xx-u-boot.dtsi b/arch/powerpc/dts/mpc85xx-u-boot.dtsi new file mode 100644 index 0000000..637db11 --- /dev/null +++ b/arch/powerpc/dts/mpc85xx-u-boot.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <u-boot.dtsi> + +/ { +#if defined(CONFIG_BINMAN) + binman { + u-boot-with-ucode-ptr { + optional-ucode; + }; + }; +#endif +}; diff --git a/arch/powerpc/dts/u-boot.dtsi b/arch/powerpc/dts/u-boot.dtsi new file mode 100644 index 0000000..ebe160f --- /dev/null +++ b/arch/powerpc/dts/u-boot.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <config.h> + +/ { +#if defined(CONFIG_BINMAN) && defined(CONFIG_MPC85xx) + binman { + filename = "u-boot-dtb.bin"; + start-pos = <CONFIG_SYS_TEXT_BASE>; + sort-by-pos; + pad-byte = <0xff>; + size = <CONFIG_SYS_MONITOR_LEN>; + + u-boot-with-ucode-ptr { + offset = <CONFIG_SYS_TEXT_BASE>; + }; + + u-boot-dtb-with-ucode { + align = <256>; + }; +#if !defined(CONFIG_SYS_MPC85XX_NO_RESETVEC) && !defined(CONFIG_NAND) + mpc85xx-bootpg-resetvec { + offset = <(CONFIG_RESET_VECTOR_ADDRESS - 0xffc)>; + }; +#endif + }; +#endif +};
add required binman node inside dts to use binman to prepare u-boot-dtb.bin Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> --- arch/powerpc/dts/mpc85xx-u-boot.dtsi | 16 ++++++++++++++++ arch/powerpc/dts/u-boot.dtsi | 31 +++++++++++++++++++++++++++++++ 2 files changed, 47 insertions(+) create mode 100644 arch/powerpc/dts/mpc85xx-u-boot.dtsi create mode 100644 arch/powerpc/dts/u-boot.dtsi