From patchwork Fri Feb 19 11:09:45 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hannes Schmelzer X-Patchwork-Id: 585150 X-Patchwork-Delegate: trini@ti.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from theia.denx.de (theia.denx.de [85.214.87.163]) by ozlabs.org (Postfix) with ESMTP id AC09F1402A9 for ; Fri, 19 Feb 2016 22:10:42 +1100 (AEDT) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id EE34739B7; Fri, 19 Feb 2016 12:10:28 +0100 (CET) Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 4cpPPFma13gN; Fri, 19 Feb 2016 12:10:28 +0100 (CET) Received: from theia.denx.de (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 50AC039BB; Fri, 19 Feb 2016 12:10:24 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id C54D1A7678 for ; Fri, 19 Feb 2016 12:10:13 +0100 (CET) Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 7VXTbrDmVJEg for ; Fri, 19 Feb 2016 12:10:13 +0100 (CET) X-policyd-weight: NOT_IN_SBL_XBL_SPAMHAUS=-1.5 NOT_IN_SPAMCOP=-1.5 NOT_IN_BL_NJABL=-1.5 (only DNSBL check requested) Received: from mail.schmelzer.or.at (mail.schmelzer.or.at [87.106.47.214]) by theia.denx.de (Postfix) with ESMTP id BE5AAA767B for ; Fri, 19 Feb 2016 12:10:11 +0100 (CET) Received: from localhost (s15287728.onlinehome-server.info [127.0.0.1]) by hamspirit.at (Postfix) with ESMTP id 7759D1FC414B; Fri, 19 Feb 2016 11:10:11 +0000 (UTC) Received: from mail.schmelzer.or.at ([127.0.0.1]) by localhost (s15287728.onlinehome-server.info [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id PZedF3ZQJvxA; Fri, 19 Feb 2016 11:10:04 +0000 (UTC) Received: from ategge3722.br-automation.co.at (212095007136.public.telering.at [212.95.7.136]) by hamspirit.at (Postfix) with ESMTP id BA2921FC4149; Fri, 19 Feb 2016 11:10:01 +0000 (UTC) From: Hannes Schmelzer To: u-boot@lists.denx.de Date: Fri, 19 Feb 2016 12:09:45 +0100 Message-Id: <1455880186-11585-4-git-send-email-oe5hpm@oevsv.at> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1455880186-11585-1-git-send-email-oe5hpm@oevsv.at> References: <1455880186-11585-1-git-send-email-oe5hpm@oevsv.at> Cc: trini@konsulko.com, Hannes Schmelzer Subject: [U-Boot] [PATCH 4/5] board/BuR: split bur_am335x_common.h into am335x-specific and BuR common parts X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.15 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" bur_am335x_common.h today holds all common configuration which is shared over all B&R boards. In future we want to bring up boards which are not based on AM335x only but we still want to have common configuration over all B&R boards independent from their architecture. To prepare this we introduce a new file "bur_cfg_common.h", where we move all common things, which are not architecture specific, from bur_am335x_common.h. On B&R am335x boards we include from now: #include #include On other B&R boards, we include only #include Signed-off-by: Hannes Schmelzer Reviewed-by: Tom Rini --- include/configs/bur_am335x_common.h | 57 ++------------------------------- include/configs/bur_cfg_common.h | 64 +++++++++++++++++++++++++++++++++++++ include/configs/kwb.h | 4 +++ include/configs/tseries.h | 5 +++ 4 files changed, 75 insertions(+), 55 deletions(-) create mode 100644 include/configs/bur_cfg_common.h diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index 8429cf5..a94b1e2 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -3,7 +3,7 @@ * * common parts used by B&R AM335x based boards * - * Copyright (C) 2013 Hannes Schmelzer - + * Copyright (C) 2016 Hannes Schmelzer - * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com * * SPDX-License-Identifier: GPL-2.0+ @@ -12,24 +12,9 @@ #ifndef __BUR_AM335X_COMMON_H__ #define __BUR_AM335X_COMMON_H__ /* ------------------------------------------------------------------------- */ -#define BUR_COMMON_ENV \ -"usbscript=usb start && fatload usb 0 0x80000000 usbscript.img && source\0" \ -"brdefaultip=if test -r ${ipaddr}; then; else" \ -" setenv ipaddr 192.168.60.1; setenv serverip 192.168.60.254;" \ -" setenv gatewayip 192.168.60.254; setenv netmask 255.255.255.0; fi;\0" \ -"netconsole=echo switching to network console ...; " \ -"if dhcp; then; else run brdefaultip; fi; setenv ncip ${serverip}; " \ -"setcurs 1 9; lcdputs myip; setcurs 10 9; lcdputs ${ipaddr};" \ -"setcurs 1 10;lcdputs serverip; setcurs 10 10; lcdputs ${serverip};" \ -"setenv stdout nc;setenv stdin nc;setenv stderr nc\0" - -#define CONFIG_PREBOOT "run brdefaultip" - - #define CONFIG_AM33XX #define CONFIG_OMAP #define CONFIG_OMAP_COMMON -#define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_CACHELINE_SIZE 64 #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ @@ -52,17 +37,11 @@ #define CONFIG_BAUDRATE 115200 /* Network defines */ -#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_NET_RETRY_COUNT 2 #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ #define CONFIG_MII /* Required in net/eth.c */ #define CONFIG_PHYLIB #define CONFIG_PHY_NATSEMI -/* Network console */ -#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */ + /* * SPL related defines. The Public RAM memory map the ROM defines the * area between 0x402F0400 and 0x4030B800 as a download area and @@ -103,38 +82,6 @@ #define CONFIG_SYS_I2C_OMAP24XX /* GPIO */ #define CONFIG_OMAP_GPIO -/* - * ---------------------------------------------------------------------------- - * The following are general good-enough settings for U-Boot. We set a - * large malloc pool as we generally have a lot of DDR, and we opt for - * function over binary size in the main portion of U-Boot as this is - * generally easily constrained later if needed. We enable the config - * options that give us information in the environment about what board - * we are on so we do not need to rely on the command prompt. We set a - * console baudrate of 115200 and use the default baud rate table. - */ -#define CONFIG_SYS_MALLOC_LEN (5120 << 10) -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */ -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE - -/* As stated above, the following choices are optional. */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE - -/* We set the max number of command args high to avoid HUSH bugs. */ -#define CONFIG_SYS_MAXARGS 64 - -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 512 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* * Our platforms make use of SPL to initalize the hardware (primarily diff --git a/include/configs/bur_cfg_common.h b/include/configs/bur_cfg_common.h new file mode 100644 index 0000000..f183775 --- /dev/null +++ b/include/configs/bur_cfg_common.h @@ -0,0 +1,64 @@ +/* + * bur_cfg_common.h + * + * common parts used over all B&R boards + * + * Copyright (C) 2016 Hannes Schmelzer - + * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __BUR_CFG_COMMON_H__ +#define __BUR_CFG_COMMON_H__ +/* ------------------------------------------------------------------------- */ +#define BUR_COMMON_ENV \ +"usbscript=usb start && fatload usb 0 ${scradr} usbscript.img &&" \ +" source ${scradr}\0" \ +"brdefaultip=if test -r ${ipaddr}; then; else" \ +" setenv ipaddr 192.168.60.1; setenv serverip 192.168.60.254;" \ +" setenv gatewayip 192.168.60.254; setenv netmask 255.255.255.0; fi;\0" \ +"netconsole=echo switching to network console ...; " \ +"if dhcp; then; else run brdefaultip; fi; setenv ncip ${serverip}; " \ +"setcurs 1 9; lcdputs myip; setcurs 10 9; lcdputs ${ipaddr};" \ +"setcurs 1 10;lcdputs serverip; setcurs 10 10; lcdputs ${serverip};" \ +"setenv stdout nc;setenv stdin nc;setenv stderr nc\0" + +#define CONFIG_PREBOOT "run cfgscr; run brdefaultip" + +#define CONFIG_BOARD_LATE_INIT + +/* Network defines */ +#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_NET_RETRY_COUNT 2 + +/* Network console */ +#define CONFIG_NETCONSOLE 1 +#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */ + +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */ +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE + +/* As stated above, the following choices are optional. */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_VERSION_VARIABLE + +/* We set the max number of command args high to avoid HUSH bugs. */ +#define CONFIG_SYS_MAXARGS 64 + +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\ + sizeof(CONFIG_SYS_PROMPT) + 16) +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#endif /* __BUR_CFG_COMMON_H__ */ diff --git a/include/configs/kwb.h b/include/configs/kwb.h index e570c71..b39bcfa 100644 --- a/include/configs/kwb.h +++ b/include/configs/kwb.h @@ -12,6 +12,7 @@ #ifndef __CONFIG_KWB_H__ #define __CONFIG_KWB_H__ +#include #include /* ------------------------------------------------------------------------- */ #define CONFIG_AM335X_LCD @@ -27,6 +28,9 @@ #define CONFIG_BMP_24BMP #define CONFIG_BMP_32BPP +/* memory */ +#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024) + /* Clock Defines */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) diff --git a/include/configs/tseries.h b/include/configs/tseries.h index 2d352ed..43cf965 100644 --- a/include/configs/tseries.h +++ b/include/configs/tseries.h @@ -12,6 +12,7 @@ #ifndef __CONFIG_TSERIES_H__ #define __CONFIG_TSERIES_H__ +#include #include /* ------------------------------------------------------------------------- */ #define CONFIG_AM335X_LCD @@ -30,6 +31,10 @@ #define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000 #define CONFIG_BOOTCOUNT_LIMIT #define CONFIG_BOOTCOUNT_AM33XX + +/* memory */ +#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024) + /* Clock Defines */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK)