Message ID | 1454126022-4314-1-git-send-email-van.freenix@gmail.com |
---|---|
State | Awaiting Upstream |
Delegated to: | Stefano Babic |
Headers | show |
On Sat, Jan 30, 2016 at 1:53 AM, Peng Fan <van.freenix@gmail.com> wrote: > From: Ye Li <ye.li@nxp.com> > > The BOOTCFG value used by bmode for SABRESD eMMC boot are actually for SD card. > Fixed the value to correct one. > > Signed-off-by: Ye Li <ye.li@nxp.com> > Signed-off-by: Peng Fan <peng.fan@nxp.com> > Reviewed-by: Stefano Babic <sbabic@denx.de> > Cc: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
On 30/01/2016 04:53, Peng Fan wrote: > From: Ye Li <ye.li@nxp.com> > > The BOOTCFG value used by bmode for SABRESD eMMC boot are actually for SD card. > Fixed the value to correct one. > > Signed-off-by: Ye Li <ye.li@nxp.com> > Signed-off-by: Peng Fan <peng.fan@nxp.com> > Reviewed-by: Stefano Babic <sbabic@denx.de> > Cc: Fabio Estevam <fabio.estevam@nxp.com> > --- > > Change V2: > Fix commit log, following Fabio's comments. > > board/freescale/mx6sabresd/mx6sabresd.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c > index d20953d..42f89ab 100644 > --- a/board/freescale/mx6sabresd/mx6sabresd.c > +++ b/board/freescale/mx6sabresd/mx6sabresd.c > @@ -638,7 +638,7 @@ static const struct boot_mode board_boot_modes[] = { > {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, > {"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, > /* 8 bit bus width */ > - {"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, > + {"emmc", MAKE_CFGVAL(0x60, 0x58, 0x00, 0x00)}, > {NULL, 0}, > }; > #endif > Applied to u-boot-imx, thanks ! Best regards, Stefano Babic
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index d20953d..42f89ab 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -638,7 +638,7 @@ static const struct boot_mode board_boot_modes[] = { {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, {"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, /* 8 bit bus width */ - {"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, + {"emmc", MAKE_CFGVAL(0x60, 0x58, 0x00, 0x00)}, {NULL, 0}, }; #endif