@@ -541,4 +541,59 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags)
{
}
+#define __BUILD_CLRBITS(bwlq, sfx, end, type) \
+ \
+static inline void clrbits_##sfx(volatile void __iomem *mem, type clr) \
+{ \
+ type __val = __raw_read##bwlq(mem); \
+ __val = end##_to_cpu(__val); \
+ __val &= ~clr; \
+ __val = cpu_to_##end(__val); \
+ __raw_write##bwlq(__val, mem); \
+}
+
+#define __BUILD_SETBITS(bwlq, sfx, end, type) \
+ \
+static inline void setbits_##sfx(volatile void __iomem *mem, type set) \
+{ \
+ type __val = __raw_read##bwlq(mem); \
+ __val = end##_to_cpu(__val); \
+ __val |= set; \
+ __val = cpu_to_##end(__val); \
+ __raw_write##bwlq(__val, mem); \
+}
+
+#define __BUILD_CLRSETBITS(bwlq, sfx, end, type) \
+ \
+static inline void clrsetbits_##sfx(volatile void __iomem *mem, \
+ type clr, type set) \
+{ \
+ type __val = __raw_read##bwlq(mem); \
+ __val = end##_to_cpu(__val); \
+ __val &= ~clr; \
+ __val |= set; \
+ __val = cpu_to_##end(__val); \
+ __raw_write##bwlq(__val, mem); \
+}
+
+#define BUILD_CLRSETBITS(bwlq, sfx, end, type) \
+ \
+__BUILD_CLRBITS(bwlq, sfx, end, type) \
+__BUILD_SETBITS(bwlq, sfx, end, type) \
+__BUILD_CLRSETBITS(bwlq, sfx, end, type)
+
+#define __to_cpu(v) (v)
+#define cpu_to__(v) (v)
+
+BUILD_CLRSETBITS(b, 8, _, u8)
+BUILD_CLRSETBITS(w, le16, le16, u16)
+BUILD_CLRSETBITS(w, be16, be16, u16)
+BUILD_CLRSETBITS(w, 16, _, u16)
+BUILD_CLRSETBITS(l, le32, le32, u32)
+BUILD_CLRSETBITS(l, be32, be32, u32)
+BUILD_CLRSETBITS(l, 32, _, u32)
+BUILD_CLRSETBITS(q, le64, le64, u64)
+BUILD_CLRSETBITS(q, be64, be64, u64)
+BUILD_CLRSETBITS(q, 64, _, u64)
+
#endif /* _ASM_IO_H */
Add support for functions clrbits_X(), setbits_X() and clrsetbits_X() on MIPS. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> --- @Wills, after rebasing my own SoC code to this series and trying to use the new accessors I've hit the same problems with endianess in a driver. My drivers have to support Big and Little Endian, thus I have to use __raw_readX/__raw_writeX. So I also added variants of the new accessors without swapping and a similar behaviour as __raw_readX/__raw_writeX. This should address your concers too. Changes in v4: - added clrbits_X(), setbits_X() and clrsetbits_X() variants without endianess swapping Changes in v3: None Changes in v2: None arch/mips/include/asm/io.h | 55 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+)