@@ -68,7 +68,7 @@ int board_phy_config(struct phy_device *phydev)
#endif
#ifdef CONFIG_USB_GADGET
-struct s3c_plat_otg_data socfpga_otg_data = {
+struct dwc2_plat_otg_data socfpga_otg_data = {
.regs_otg = CONFIG_USB_DWC2_REG_ADDR,
.usb_gusbcfg = 0x1417,
};
@@ -68,7 +68,7 @@ int board_phy_config(struct phy_device *phydev)
#endif
#ifdef CONFIG_USB_GADGET
-struct s3c_plat_otg_data socfpga_otg_data = {
+struct dwc2_plat_otg_data socfpga_otg_data = {
.regs_otg = CONFIG_USB_DWC2_REG_ADDR,
.usb_gusbcfg = 0x1417,
};
@@ -95,7 +95,7 @@ int board_mmc_init(bd_t *bis)
#endif
#ifdef CONFIG_USB_GADGET
-static struct s3c_plat_otg_data bcm_otg_data = {
+static struct dwc2_plat_otg_data bcm_otg_data = {
.regs_otg = HSOTG_BASE_ADDR
};
@@ -28,7 +28,7 @@ int board_init(void)
}
#ifdef CONFIG_USB_GADGET
-struct s3c_plat_otg_data socfpga_otg_data = {
+struct dwc2_plat_otg_data socfpga_otg_data = {
.regs_otg = CONFIG_USB_DWC2_REG_ADDR,
.usb_gusbcfg = 0x1417,
};
@@ -68,7 +68,7 @@ int board_phy_config(struct phy_device *phydev)
#endif
#ifdef CONFIG_USB_GADGET
-struct s3c_plat_otg_data socfpga_otg_data = {
+struct dwc2_plat_otg_data socfpga_otg_data = {
.regs_otg = CONFIG_USB_DWC2_REG_ADDR,
.usb_gusbcfg = 0x1417,
};
@@ -183,7 +183,7 @@ static int s5pc1xx_phy_control(int on)
return 0;
}
-struct s3c_plat_otg_data s5pc110_otg_data = {
+struct dwc2_plat_otg_data s5pc110_otg_data = {
.phy_control = s5pc1xx_phy_control,
.regs_phy = S5PC110_PHY_BASE,
.regs_otg = S5PC110_OTG_BASE,
@@ -452,7 +452,7 @@ static int s5pc210_phy_control(int on)
return regulator_set_mode(dev, OPMODE_LPM);
}
-struct s3c_plat_otg_data s5pc210_otg_data = {
+struct dwc2_plat_otg_data s5pc210_otg_data = {
.phy_control = s5pc210_phy_control,
.regs_phy = EXYNOS4X12_USBPHY_BASE,
.regs_otg = EXYNOS4X12_USBOTG_BASE,
@@ -41,7 +41,7 @@ u32 get_board_rev(void)
#endif
static void check_hw_revision(void);
-struct s3c_plat_otg_data s5pc210_otg_data;
+struct dwc2_plat_otg_data s5pc210_otg_data;
int exynos_init(void)
{
@@ -419,7 +419,7 @@ static int s5pc210_phy_control(int on)
return 0;
}
-struct s3c_plat_otg_data s5pc210_otg_data = {
+struct dwc2_plat_otg_data s5pc210_otg_data = {
.phy_control = s5pc210_phy_control,
.regs_phy = EXYNOS4_USBPHY_BASE,
.regs_otg = EXYNOS4_USBOTG_BASE,
@@ -303,7 +303,7 @@ static int s5pc210_phy_control(int on)
return 0;
}
-struct s3c_plat_otg_data s5pc210_otg_data = {
+struct dwc2_plat_otg_data s5pc210_otg_data = {
.phy_control = s5pc210_phy_control,
.regs_phy = EXYNOS4X12_USBPHY_BASE,
.regs_otg = EXYNOS4X12_USBOTG_BASE,
@@ -179,7 +179,7 @@ static int s5pc210_phy_control(int on)
return 0;
}
-struct s3c_plat_otg_data s5pc210_otg_data = {
+struct dwc2_plat_otg_data s5pc210_otg_data = {
.phy_control = s5pc210_phy_control,
.regs_phy = EXYNOS4_USBPHY_BASE,
.regs_otg = EXYNOS4_USBOTG_BASE,
@@ -68,7 +68,7 @@ int board_phy_config(struct phy_device *phydev)
#endif
#ifdef CONFIG_USB_GADGET
-struct s3c_plat_otg_data socfpga_otg_data = {
+struct dwc2_plat_otg_data socfpga_otg_data = {
.regs_otg = CONFIG_USB_DWC2_REG_ADDR,
.usb_gusbcfg = 0x1417,
};
@@ -797,7 +797,7 @@ static struct dwc2_udc memory = {
* probe - binds to the platform device
*/
-int s3c_udc_probe(struct s3c_plat_otg_data *pdata)
+int s3c_udc_probe(struct dwc2_plat_otg_data *pdata)
{
struct dwc2_udc *dev = &memory;
int retval = 0;
@@ -80,7 +80,7 @@ struct dwc2_udc {
struct usb_gadget gadget;
struct usb_gadget_driver *driver;
- struct s3c_plat_otg_data *pdata;
+ struct dwc2_plat_otg_data *pdata;
int ep0state;
struct dwc2_ep ep[DWC2_MAX_ENDPOINTS];
@@ -9,7 +9,7 @@
#ifndef __S3C_USB_GADGET
#define __S3C_USB_GADGET
-struct s3c_plat_otg_data {
+struct dwc2_plat_otg_data {
int (*phy_control)(int on);
unsigned int regs_phy;
unsigned int regs_otg;
@@ -18,6 +18,6 @@ struct s3c_plat_otg_data {
unsigned int usb_gusbcfg;
};
-int s3c_udc_probe(struct s3c_plat_otg_data *pdata);
+int s3c_udc_probe(struct dwc2_plat_otg_data *pdata);
#endif
The driver is actually for the Designware DWC2 controller. This patch is the first to rename global symbol, the struct s3c_plat_otg_data. The rename is done automatically: $ sed -i "s/s3c_plat_otg_data/dwc2_plat_otg_data/g" \ `git grep s3c_plat_otg_data | cut -d : -f 1` Signed-off-by: Marek Vasut <marex@denx.de> --- board/altera/arria5-socdk/socfpga.c | 2 +- board/altera/cyclone5-socdk/socfpga.c | 2 +- board/broadcom/bcm28155_ap/bcm28155_ap.c | 2 +- board/denx/mcvevk/socfpga.c | 2 +- board/ebv/socrates/socfpga.c | 2 +- board/samsung/goni/goni.c | 2 +- board/samsung/odroid/odroid.c | 2 +- board/samsung/trats/trats.c | 4 ++-- board/samsung/trats2/trats2.c | 2 +- board/samsung/universal_c210/universal.c | 2 +- board/terasic/sockit/socfpga.c | 2 +- drivers/usb/gadget/dwc2_udc_otg.c | 2 +- drivers/usb/gadget/dwc2_udc_otg_priv.h | 2 +- include/usb/s3c_udc.h | 4 ++-- 14 files changed, 16 insertions(+), 16 deletions(-)