@@ -557,6 +557,9 @@ config ARCH_ZYNQ
config ARCH_ZYNQMP
bool "Support Xilinx ZynqMP Platform"
select ARM64
+ select DM
+ select OF_CONTROL
+ select DM_SERIAL
config TEGRA
bool "NVIDIA Tegra"
@@ -60,8 +60,8 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
zynq-zc770-xm011.dtb \
zynq-zc770-xm012.dtb \
zynq-zc770-xm013.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb
dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-evm.dtb
-
dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
socfpga_cyclone5_mcvevk.dtb \
new file mode 100644
@@ -0,0 +1,164 @@
+/*
+ * dts file for Xilinx ZynqMP
+ *
+ * (C) Copyright 2014 - 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/dts-v1/;
+
+/include/ "zynqmp.dtsi"
+
+/ {
+ model = "ZynqMP EP108";
+
+ aliases {
+ serial0 = &uart0;
+ spi0 = &qspi;
+ spi1 = &spi0;
+ spi2 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x40000000>;
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&gem0 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ phy0: phy@0{
+ reg = <0>;
+ max-speed = <100>;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+ eeprom@54 {
+ compatible = "at,24c64";
+ reg = <0x54>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ eeprom@55 {
+ compatible = "at,24c64";
+ reg = <0x55>;
+ };
+};
+
+&qspi {
+ status = "okay";
+ flash@0 {
+ compatible = "n25q512a11";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <10000000>;
+ partition@qspi-fsbl-uboot { /* for testing purpose */
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@qspi-linux { /* for testing purpose */
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@qspi-device-tree { /* for testing purpose */
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@qspi-rootfs { /* for testing purpose */
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5E0000>;
+ };
+ };
+};
+
+&sata {
+ status = "okay";
+ ceva,broken-gen2;
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&sdhci1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+ num-cs = <1>;
+ spi0_flash0: spi0_flash0@0 {
+ compatible = "m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ spi0_flash0@00000000 {
+ label = "spi0_flash0";
+ reg = <0x0 0x100000>;
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+ num-cs = <1>;
+ spi1_flash0: spi1_flash0@0 {
+ compatible = "m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ spi1_flash0@00000000 {
+ label = "spi1_flash0";
+ reg = <0x0 0x100000>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "peripheral";
+ maximum-speed = "high-speed";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+ maximum-speed = "high-speed";
+};
+
+&watchdog0 {
+ status = "okay";
+};
new file mode 100644
@@ -0,0 +1,385 @@
+/*
+ * dts file for Xilinx ZynqMP
+ *
+ * (C) Copyright 2014 - 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/ {
+ compatible = "xlnx,zynqmp";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x1>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x3>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 143 4>,
+ <0 144 4>,
+ <0 145 4>,
+ <0 146 4>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <1 13 0xf01>,
+ <1 14 0xf01>,
+ <1 11 0xf01>,
+ <1 10 0xf01>;
+ };
+
+ amba_apu {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ gic: interrupt-controller@f9010000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ reg = <0x0 0xf9010000 0x10000>,
+ <0x0 0xf902f000 0x2000>,
+ <0x0 0xf9040000 0x20000>,
+ <0x0 0xf906f000 0x2000>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <1 9 0xf04>;
+ };
+ };
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ can0: can@ff060000 {
+ compatible = "xlnx,zynq-can-1.0";
+ status = "disabled";
+ clocks = <&misc_clk &misc_clk>;
+ clock-names = "can_clk", "pclk";
+ reg = <0x0 0xff060000 0x1000>;
+ interrupts = <0 23 4>;
+ interrupt-parent = <&gic>;
+ tx-fifo-depth = <0x40>;
+ rx-fifo-depth = <0x40>;
+ };
+
+ can1: can@ff070000 {
+ compatible = "xlnx,zynq-can-1.0";
+ status = "disabled";
+ clocks = <&misc_clk &misc_clk>;
+ clock-names = "can_clk", "pclk";
+ reg = <0x0 0xff070000 0x1000>;
+ interrupts = <0 24 4>;
+ interrupt-parent = <&gic>;
+ tx-fifo-depth = <0x40>;
+ rx-fifo-depth = <0x40>;
+ };
+
+ misc_clk: misc_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ gpio: gpio@ff0a0000 {
+ compatible = "xlnx,zynqmp-gpio-1.0";
+ status = "disabled";
+ #gpio-cells = <0x2>;
+ clocks = <&misc_clk>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 16 4>;
+ reg = <0x0 0xff0a0000 0x1000>;
+ };
+
+ gem0: ethernet@ff0b0000 {
+ compatible = "cdns,gem";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 57 4>, <0 57 4>;
+ reg = <0x0 0xff0b0000 0x1000>;
+ clock-names = "pclk", "hclk", "tx_clk";
+ clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gem1: ethernet@ff0c0000 {
+ compatible = "cdns,gem";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 59 4>, <0 59 4>;
+ reg = <0x0 0xff0c0000 0x1000>;
+ clock-names = "pclk", "hclk", "tx_clk";
+ clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gem2: ethernet@ff0d0000 {
+ compatible = "cdns,gem";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 61 4>, <0 61 4>;
+ reg = <0x0 0xff0d0000 0x1000>;
+ clock-names = "pclk", "hclk", "tx_clk";
+ clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gem3: ethernet@ff0e0000 {
+ compatible = "cdns,gem";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 63 4>, <0 63 4>;
+ reg = <0x0 0xff0e0000 0x1000>;
+ clock-names = "pclk", "hclk", "tx_clk";
+ clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c_clk: i2c_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0x0>;
+ clock-frequency = <111111111>;
+ };
+
+ i2c0: i2c@ff020000 {
+ compatible = "cdns,i2c-r1p10";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 17 4>;
+ reg = <0x0 0xff020000 0x1000>;
+ clocks = <&i2c_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@ff030000 {
+ compatible = "cdns,i2c-r1p10";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 18 4>;
+ reg = <0x0 0xff030000 0x1000>;
+ clocks = <&i2c_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ qspi: spi@ff0f0000 {
+ compatible = "xlnx,zynqmp-qspi-1.0";
+ status = "disabled";
+ clock-names = "ref_clk", "pclk";
+ clocks = <&misc_clk &misc_clk>;
+ interrupts = <0 15 4>;
+ interrupt-parent = <&gic>;
+ num-cs = <1>;
+ reg = <0x0 0xff0f0000 0x1000 0x0 0xc0000000 0x8000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ sata_clk: sata_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <75000000>;
+ };
+
+ sata: ahci@fd0c0000 {
+ compatible = "ceva,ahci-1v84";
+ status = "disabled";
+ reg = <0x0 0xfd0c0000 0x2000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 133 4>;
+ clocks = <&sata_clk>;
+ };
+
+ sdhci0: sdhci@ff160000 {
+ compatible = "arasan,sdhci-8.9a";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 48 4>;
+ reg = <0x0 0xff160000 0x1000>;
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&misc_clk>, <&misc_clk>;
+ };
+
+ sdhci1: sdhci@ff170000 {
+ compatible = "arasan,sdhci-8.9a";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 49 4>;
+ reg = <0x0 0xff170000 0x1000>;
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&misc_clk>, <&misc_clk>;
+ };
+
+ smmu: smmu@fd800000 {
+ compatible = "arm,mmu-500";
+ reg = <0x0 0xfd800000 0x20000>;
+ #global-interrupts = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 157 4>,
+ <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
+ <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
+ <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
+ <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>;
+ };
+
+ spi0: spi@ff040000 {
+ compatible = "cdns,spi-r1p6";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 19 4>;
+ reg = <0x0 0xff040000 0x1000>;
+ clock-names = "ref_clk", "pclk";
+ clocks = <&misc_clk &misc_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@ff050000 {
+ compatible = "cdns,spi-r1p6";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 20 4>;
+ reg = <0x0 0xff050000 0x1000>;
+ clock-names = "ref_clk", "pclk";
+ clocks = <&misc_clk &misc_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ttc0: timer@ff110000 {
+ compatible = "cdns,ttc";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
+ reg = <0x0 0xff110000 0x1000>;
+ clocks = <&misc_clk>;
+ timer-width = <32>;
+ };
+
+ ttc1: timer@ff120000 {
+ compatible = "cdns,ttc";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
+ reg = <0x0 0xff120000 0x1000>;
+ clocks = <&misc_clk>;
+ timer-width = <32>;
+ };
+
+ ttc2: timer@ff130000 {
+ compatible = "cdns,ttc";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
+ reg = <0x0 0xff130000 0x1000>;
+ clocks = <&misc_clk>;
+ timer-width = <32>;
+ };
+
+ ttc3: timer@ff140000 {
+ compatible = "cdns,ttc";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
+ reg = <0x0 0xff140000 0x1000>;
+ clocks = <&misc_clk>;
+ timer-width = <32>;
+ };
+
+ uart0: serial@ff000000 {
+ compatible = "cdns,uart-r1p8";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 21 4>;
+ reg = <0x0 0xff000000 0x1000>;
+ clock-names = "uart_clk", "pclk";
+ clocks = <&misc_clk &misc_clk>;
+ };
+
+ uart1: serial@ff010000 {
+ compatible = "cdns,uart-r1p8";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 22 4>;
+ reg = <0x0 0xff010000 0x1000>;
+ clock-names = "uart_clk", "pclk";
+ clocks = <&misc_clk &misc_clk>;
+ };
+
+ usb0: usb@fe200000 {
+ compatible = "snps,dwc3";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 65 4>;
+ reg = <0x0 0xfe200000 0x40000>;
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&misc_clk>, <&misc_clk>;
+ };
+
+ usb1: usb@fe300000 {
+ compatible = "snps,dwc3";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 70 4>;
+ reg = <0x0 0xfe300000 0x40000>;
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&misc_clk>, <&misc_clk>;
+ };
+
+ watchdog0: watchdog@fd4d0000 {
+ compatible = "cdns,wdt-r1p2";
+ status = "disabled";
+ clocks= <&misc_clk>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 52 1>;
+ reg = <0x0 0xfd4d0000 0x1000>;
+ timeout-sec = <10>;
+ };
+ };
+};
@@ -2,7 +2,7 @@ CONFIG_ARM=y
CONFIG_ARCH_ZYNQMP=y
CONFIG_ZYNQMP_USB=y
CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-ep"
+CONFIG_DEFAULT_DEVICE_TREE="zynqmp-ep108"
CONFIG_SYS_PROMPT="ZynqMP> "
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_IMLS is not set
@@ -20,5 +20,6 @@ CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
+CONFIG_OF_EMBED=y
CONFIG_NET_RANDOM_ETHADDR=y
# CONFIG_REGEX is not set