diff mbox

[U-Boot,2/3] sunxi: power: Change axp209 LDO3 and LDO4 default to disabled

Message ID 1444480834-15108-2-git-send-email-hdegoede@redhat.com
State Accepted
Delegated to: Hans de Goede
Headers show

Commit Message

Hans de Goede Oct. 10, 2015, 12:40 p.m. UTC 
LDO3 and LDO4 are normally either unused, or used to power csi
attached camera sensors, and as such do not need to be enabled at
boot time.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/power/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 21e4929..c0d7aa5 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -126,7 +126,7 @@  config AXP_ALDO2_VOLT
 config AXP_ALDO3_VOLT
 	int "axp pmic (a)ldo3 voltage"
 	depends on AXP209_POWER || AXP221_POWER
-	default 2800 if AXP209_POWER
+	default 0 if AXP209_POWER
 	default 3000 if MACH_SUN6I || MACH_SUN8I
 	---help---
 	Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to
@@ -137,7 +137,7 @@  config AXP_ALDO3_VOLT
 config AXP_ALDO4_VOLT
 	int "axp pmic (a)ldo4 voltage"
 	depends on AXP209_POWER
-	default 2800 if AXP209_POWER
+	default 0 if AXP209_POWER
 	---help---
 	Set the voltage (mV) to program the axp pmic aldo4 at, set to 0 to
 	disable aldo4.