diff mbox

[U-Boot] armv8: ls2085a: Update bootargs as per default target console

Message ID 1438486904-2710-1-git-send-email-prabhakar@freescale.com
State Accepted
Delegated to: York Sun
Headers show

Commit Message

Prabhakar Kushwaha Aug. 2, 2015, 3:41 a.m. UTC 
LS2085 targets supports following UART console
 LS2085AQDS	UART0
 LS2085ARDB	UART1
 LS2085ASim	UART0
 LS2085AEmu	UART0

So update the bootargs as per the default console present at the target

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
---
 include/configs/ls2085a_common.h | 4 ++--
 include/configs/ls2085ardb.h     | 6 ++++++
 2 files changed, 8 insertions(+), 2 deletions(-)

Comments

York Sun Sept. 2, 2015, 2:44 a.m. UTC | #1 
On 08/01/2015 10:41 PM, Prabhakar Kushwaha wrote:
> LS2085 targets supports following UART console
>  LS2085AQDS	UART0
>  LS2085ARDB	UART1
>  LS2085ASim	UART0
>  LS2085AEmu	UART0
> 
> So update the bootargs as per the default console present at the target
> 
> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
> ---

Applied to fsl-qoriq master branch. Awaiting upstream.

York
diff mbox

Patch

diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h
index 7ee6001..5dd2b0a 100644
--- a/include/configs/ls2085a_common.h
+++ b/include/configs/ls2085a_common.h
@@ -262,8 +262,8 @@  unsigned long long get_qixis_addr(void);
 	"kernel_size=0x2800000\0"		\
 	"console=ttyAMA0,38400n8\0"
 
-#define CONFIG_BOOTARGS		"console=ttyS1,115200 root=/dev/ram0 " \
-				"earlycon=uart8250,mmio,0x21c0600,115200 " \
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 root=/dev/ram0 " \
+				"earlycon=uart8250,mmio,0x21c0500,115200 " \
 				"ramdisk_size=0x2000000 default_hugepagesz=2m" \
 				" hugepagesz=2m hugepages=16"
 #define CONFIG_BOOTCOMMAND		"cp.b $kernel_start $kernel_load "     \
diff --git a/include/configs/ls2085ardb.h b/include/configs/ls2085ardb.h
index 6a5528e..c1c1572 100644
--- a/include/configs/ls2085ardb.h
+++ b/include/configs/ls2085ardb.h
@@ -326,6 +326,12 @@  unsigned long get_board_sys_clk(void);
 	"kernel_load=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"
 
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTARGS		"console=ttyS1,115200 root=/dev/ram0 " \
+				"earlycon=uart8250,mmio,0x21c0600,115200 " \
+				"ramdisk_size=0x2000000 default_hugepagesz=2m" \
+				" hugepagesz=2m hugepages=16"
+
 /* MAC/PHY configuration */
 #ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_PHYLIB_10G