From patchwork Tue Jun 23 23:29:07 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Simon Glass X-Patchwork-Id: 487873 X-Patchwork-Delegate: trini@ti.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from theia.denx.de (theia.denx.de [85.214.87.163]) by ozlabs.org (Postfix) with ESMTP id 87F9514030B for ; Wed, 24 Jun 2015 09:32:30 +1000 (AEST) Authentication-Results: ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=google.com header.i=@google.com header.b=D2mVJOMU; dkim-atps=neutral Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 243C64B6EB; Wed, 24 Jun 2015 01:31:52 +0200 (CEST) Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id MxnvRoUEqVxm; Wed, 24 Jun 2015 01:31:51 +0200 (CEST) Received: from theia.denx.de (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id DFBED4B754; Wed, 24 Jun 2015 01:31:00 +0200 (CEST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 2E0434B6B1 for ; Wed, 24 Jun 2015 01:30:12 +0200 (CEST) Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 5J5yzv52FI6D for ; Wed, 24 Jun 2015 01:30:12 +0200 (CEST) X-policyd-weight: NOT_IN_SBL_XBL_SPAMHAUS=-1.5 NOT_IN_SPAMCOP=-1.5 NOT_IN_BL_NJABL=-1.5 (only DNSBL check requested) Received: from mail-ig0-f175.google.com (mail-ig0-f175.google.com [209.85.213.175]) by theia.denx.de (Postfix) with ESMTPS id 237BA4B691 for ; Wed, 24 Jun 2015 01:29:56 +0200 (CEST) Received: by igin14 with SMTP id n14so22959068igi.1 for ; Tue, 23 Jun 2015 16:29:55 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=sender:from:to:cc:subject:date:message-id:in-reply-to:references; bh=LQjkxQliM46QdiQYFtXe72wsjUGrflhIuM15YPTI/tY=; b=D2mVJOMU1nLujlVea+/eUg7GdEK6UDrrYlaTQ/EODL8gHFJNPahwm+bXKZNZwX1gPg wfOIW9C/nhUZZog8zh37wQW9ov3Ki4hZ9sPlJ3i0XjUCpngZTyyxrZ7G3uUKqhwb6Tco MW2/5LPoDfmzTw5Os9eq5DgAcBaGm9m0n6CDZDk+caFK1q0CZyRXk6qp7SaYu/EixIcS xmlEovLCKtYfETNZO7reprcm19y62n7vw1kTZJ5aQH4LCV1m/PqEqLTv7cPMpjjKw+c0 vRcarBnUjeuY2NG2Mm92QHAM9S8BZF5r0Ptmpu8EPeNCxyawR9SULtilxLVqnOsPqgv9 f2JQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:sender:from:to:cc:subject:date:message-id :in-reply-to:references; bh=LQjkxQliM46QdiQYFtXe72wsjUGrflhIuM15YPTI/tY=; b=NPDB3EIi6KcWq4ZEP3IUUhvffc21x5j3C9OQx/6WW7TQ30nu7ejww1Kb3HImwRCzu0 btH9gGJRanE4UAAabnKfk2VW/U3dIVwg0g9biZDa+jYkqD28zJXh3arvZEaVP1i2+DZe SM70XO76HULNI52KLlqdriQlT0g9r06MZkX0Qoen5iNMErQBoAzyXLHWmDEkvn+03rrp SFQ3bcPstTIQk7/o7JdIKqHjZSBwokAhdCiuuCSUTKOrSHEN5CzxrE+NWvjQkeInxb3e SPccFgKjhRGIrgC84SQif0+wNKaHKC8H+YNM7aZuNem6/cneg2qXVNY3gHtEctzzzYu5 Sw6g== X-Gm-Message-State: ALoCoQkfumeSsqqPWyHBDLa7RV5cm9dYFmRlR7SZ/i74Y87pNUue2Nmg31F5wDW2IRiKejXdU4uR X-Received: by 10.107.157.205 with SMTP id g196mr49974360ioe.57.1435102195014; Tue, 23 Jun 2015 16:29:55 -0700 (PDT) Received: from kaki.bld.corp.google.com ([172.29.216.32]) by mx.google.com with ESMTPSA id t7sm794266ign.8.2015.06.23.16.29.49 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 23 Jun 2015 16:29:50 -0700 (PDT) Received: by kaki.bld.corp.google.com (Postfix, from userid 121222) id 9AB8B22209B; Tue, 23 Jun 2015 17:29:44 -0600 (MDT) From: Simon Glass To: U-Boot Mailing List Date: Tue, 23 Jun 2015 17:29:07 -0600 Message-Id: <1435102150-29438-23-git-send-email-sjg@chromium.org> X-Mailer: git-send-email 2.4.3.573.g4eafbef In-Reply-To: <1435102150-29438-1-git-send-email-sjg@chromium.org> References: <1435102150-29438-1-git-send-email-sjg@chromium.org> Cc: huangtao , Tom Rini , Tom Cubie , cwx Subject: [U-Boot] [PATCH v3 22/25] rockchip: Add SPI driver X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.15 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" Add a SPI driver for the Rockchip RK3288, using driver model. It should work for other Rockchip SoCs also. Signed-off-by: Simon Glass --- Changes in v3: None Changes in v2: None drivers/spi/Kconfig | 10 ++ drivers/spi/Makefile | 1 + drivers/spi/rk_spi.c | 375 +++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/spi/rk_spi.h | 121 +++++++++++++++++ 4 files changed, 507 insertions(+) create mode 100644 drivers/spi/rk_spi.c create mode 100644 drivers/spi/rk_spi.h diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 357a335..52e1a56 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -51,3 +51,13 @@ config CADENCE_QSPI Enable the Cadence Quad-SPI (QSPI) driver. This driver can be used to access the SPI NOR flash on platforms embedding this Cadence IP core. + +config ROCKCHIP_SPI + bool "Rockchip SPI driver" + depends on DM_SPI + help + Enable the Rockchip SPI driver, used to access SPI NOR flash and + other SPI peripherals (such as the Chrome OS EC) on Rockchip SoCs. + This uses driver model and requires a device tree binding to + operate. + diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index e288692..2d74ca4 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_SANDBOX_SPI) += sandbox_spi.o obj-$(CONFIG_SH_SPI) += sh_spi.o obj-$(CONFIG_SH_QSPI) += sh_qspi.o obj-$(CONFIG_FSL_ESPI) += fsl_espi.o +obj-$(CONFIG_ROCKCHIP_SPI) += rk_spi.o obj-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o obj-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o obj-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o diff --git a/drivers/spi/rk_spi.c b/drivers/spi/rk_spi.c new file mode 100644 index 0000000..7ef0d63 --- /dev/null +++ b/drivers/spi/rk_spi.c @@ -0,0 +1,375 @@ +/* + * spi driver for rockchip + * + * (C) Copyright 2015 Google, Inc + * + * (C) Copyright 2008-2013 Rockchip Electronics + * Peter, Software Engineering, . + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "rk_spi.h" + +DECLARE_GLOBAL_DATA_PTR; + +struct rockchip_spi_platdata { + enum periph_id periph_id; + struct udevice *pinctrl; + s32 frequency; /* Default clock frequency, -1 for none */ + fdt_addr_t base; + uint deactivate_delay_us; /* Delay to wait after deactivate */ +}; + +struct rockchip_spi_priv { + struct rockchip_spi *regs; + struct udevice *clk_gpll; + unsigned int max_freq; + unsigned int mode; + enum periph_id periph_id; /* Peripheral ID for this device */ + ulong last_transaction_us; /* Time of last transaction end */ + u8 bits_per_word; /* max 16 bits per word */ + u8 n_bytes; + unsigned int speed_hz; + unsigned int tmode; + uint input_rate; +}; + +#define SPI_FIFO_DEPTH 32 + +static void rkspi_dump_regs(struct rockchip_spi *regs) +{ + debug("RK SPI registers:\n"); + debug("=================================\n"); + debug("ctrl0: \t\t0x%08x\n", readl(®s->ctrlr0)); + debug("ctrl1: \t\t0x%08x\n", readl(®s->ctrlr1)); + debug("ssienr: \t\t0x%08x\n", readl(®s->enr)); + debug("ser: \t\t0x%08x\n", readl(®s->ser)); + debug("baudr: \t\t0x%08x\n", readl(®s->baudr)); + debug("txftlr: \t\t0x%08x\n", readl(®s->txftlr)); + debug("rxftlr: \t\t0x%08x\n", readl(®s->rxftlr)); + debug("txflr: \t\t0x%08x\n", readl(®s->txflr)); + debug("rxflr: \t\t0x%08x\n", readl(®s->rxflr)); + debug("sr: \t\t0x%08x\n", readl(®s->sr)); + debug("imr: \t\t0x%08x\n", readl(®s->imr)); + debug("isr: \t\t0x%08x\n", readl(®s->isr)); + debug("dmacr: \t\t0x%08x\n", readl(®s->dmacr)); + debug("dmatdlr: \t0x%08x\n", readl(®s->dmatdlr)); + debug("dmardlr: \t0x%08x\n", readl(®s->dmardlr)); + debug("=================================\n"); +} + +static void rkspi_enable_chip(struct rockchip_spi *regs, bool enable) +{ + writel(enable ? 1 : 0, ®s->enr); +} + +static void rkspi_set_clk(struct rockchip_spi_priv *priv, uint speed) +{ + uint clk_div; + + clk_div = priv->input_rate / speed; + clk_div = (clk_div + 1) & 0xfffe; + debug("spi speed %u, div %u\n", speed, clk_div); + + writel(clk_div, &priv->regs->baudr); +} + +static int rkspi_wait_till_not_busy(struct rockchip_spi *regs) +{ + unsigned int delay = 1000; + + while (delay--) { + if (!(readl(®s->sr) & SR_BUSY)) + return 0; + + udelay(1); + } + debug("RK SPI: Status keeps busy for 1000us after a read/write!\n"); + + return -ETIMEDOUT; +} + +static void spi_cs_activate(struct rockchip_spi *regs, uint cs) +{ + debug("activate cs%u\n", cs); + writel(1 << cs, ®s->ser); +} + +static void spi_cs_deactivate(struct rockchip_spi *regs, uint cs) +{ + debug("deactivate cs%u\n", cs); + writel(0, ®s->ser); +} + +static int rockchip_spi_ofdata_to_platdata(struct udevice *bus) +{ + struct rockchip_spi_platdata *plat = bus->platdata; + const void *blob = gd->fdt_blob; + int node = bus->of_offset; + int ret; + + plat->base = dev_get_addr(bus); + ret = uclass_get_device(UCLASS_PINCTRL, 0, &plat->pinctrl); + if (ret) + return ret; + ret = pinctrl_get_periph_id(plat->pinctrl, bus); + + if (ret < 0) { + debug("%s: Could not get peripheral ID for %s: %d\n", __func__, + bus->name, ret); + return -FDT_ERR_NOTFOUND; + } + plat->periph_id = ret; + + plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency", + 50000000); + plat->deactivate_delay_us = fdtdec_get_int(blob, node, + "spi-deactivate-delay", 0); + debug("%s: base=%x, periph_id=%d, max-frequency=%d, deactivate_delay=%d\n", + __func__, plat->base, plat->periph_id, plat->frequency, + plat->deactivate_delay_us); + + return 0; +} + +static int rockchip_spi_probe(struct udevice *bus) +{ + struct rockchip_spi_platdata *plat = dev_get_platdata(bus); + struct rockchip_spi_priv *priv = dev_get_priv(bus); + int ret; + + debug("%s: probe\n", __func__); + priv->regs = (struct rockchip_spi *)plat->base; + + priv->last_transaction_us = timer_get_us(); + priv->max_freq = plat->frequency; + priv->periph_id = plat->periph_id; + ret = uclass_get_device(UCLASS_CLK, CLK_GENERAL, &priv->clk_gpll); + if (ret) { + debug("%s: Failed to find CLK_GENERAL: %d\n", __func__, ret); + return ret; + } + + /* + * Use 99 MHz as our clock since it divides nicely into 594 MHz which + * is the assumed speed for CLK_GENERAL. + */ + ret = clk_set_periph_rate(priv->clk_gpll, plat->periph_id, 99000000); + if (ret < 0) { + debug("%s: Failed to set clock: %d\n", __func__, ret); + return ret; + } + priv->input_rate = ret; + debug("%s: rate = %u\n", __func__, priv->input_rate); + priv->bits_per_word = 8; + priv->tmode = TMOD_TR; /* Tx & Rx */ + + return 0; +} + +static int rockchip_spi_claim_bus(struct udevice *dev) +{ + struct udevice *bus = dev->parent; + struct rockchip_spi_platdata *plat = dev_get_platdata(bus); + struct rockchip_spi_priv *priv = dev_get_priv(bus); + struct rockchip_spi *regs = priv->regs; + struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); + u8 spi_dfs, spi_tf; + uint ctrlr0; + int ret; + + /* Disable the SPI hardware */ + rkspi_enable_chip(regs, 0); + + switch (priv->bits_per_word) { + case 8: + priv->n_bytes = 1; + spi_dfs = DFS_8BIT; + spi_tf = HALF_WORD_OFF; + break; + case 16: + priv->n_bytes = 2; + spi_dfs = DFS_16BIT; + spi_tf = HALF_WORD_ON; + break; + default: + debug("%s: unsupported bits: %dbits\n", __func__, + priv->bits_per_word); + return -EPROTONOSUPPORT; + } + + rkspi_set_clk(priv, priv->speed_hz); + + /* Operation Mode */ + ctrlr0 = OMOD_MASTER << OMOD_SHIFT; + + /* Data Frame Size */ + ctrlr0 |= spi_dfs & DFS_MASK << DFS_SHIFT; + + /* set SPI mode 0..3 */ + if (priv->mode & SPI_CPOL) + ctrlr0 |= SCOL_HIGH << SCOL_SHIFT; + if (priv->mode & SPI_CPHA) + ctrlr0 |= SCPH_TOGSTA << SCPH_SHIFT; + + /* Chip Select Mode */ + ctrlr0 |= CSM_KEEP << CSM_SHIFT; + + /* SSN to Sclk_out delay */ + ctrlr0 |= SSN_DELAY_ONE << SSN_DELAY_SHIFT; + + /* Serial Endian Mode */ + ctrlr0 |= SEM_LITTLE << SEM_SHIFT; + + /* First Bit Mode */ + ctrlr0 |= FBM_MSB << FBM_SHIFT; + + /* Byte and Halfword Transform */ + ctrlr0 |= (spi_tf & HALF_WORD_MASK) << HALF_WORD_TX_SHIFT; + + /* Rxd Sample Delay */ + ctrlr0 |= 0 << RXDSD_SHIFT; + + /* Frame Format */ + ctrlr0 |= FRF_SPI << FRF_SHIFT; + + /* Tx and Rx mode */ + ctrlr0 |= (priv->tmode & TMOD_MASK) << TMOD_SHIFT; + + writel(ctrlr0, ®s->ctrlr0); + + ret = pinctrl_request(plat->pinctrl, priv->periph_id, slave_plat->cs); + if (ret) { + debug("%s: Cannot request pinctrl: %d\n", __func__, ret); + return ret; + } + + return 0; +} + +static int rockchip_spi_release_bus(struct udevice *dev) +{ + return 0; +} + +static int rockchip_spi_xfer(struct udevice *dev, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) +{ + struct udevice *bus = dev->parent; + struct rockchip_spi_priv *priv = dev_get_priv(bus); + struct rockchip_spi *regs = priv->regs; + struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); + int len = bitlen >> 3; + const u8 *out = dout; + u8 *in = din; + int toread, towrite; + int ret; + + debug("%s: dout=%p, din=%p, len=%x, flags=%lx\n", __func__, dout, din, + len, flags); + if (0) + rkspi_dump_regs(regs); + + /* Assert CS before transfer */ + if (flags & SPI_XFER_BEGIN) + spi_cs_activate(regs, slave_plat->cs); + + while (len > 0) { + int todo = min(len, 0xffff); + + rkspi_enable_chip(regs, true); + writel(todo - 1, ®s->ctrlr1); + rkspi_enable_chip(regs, true); + + toread = todo; + towrite = todo; + while (toread || towrite) { + u32 status = readl(®s->sr); + + if (towrite && !(status & SR_TF_FULL)) { + writel(out ? *out++ : 0, regs->txdr); + towrite--; + } + if (toread && !(status & SR_RF_EMPT)) { + u32 byte = readl(regs->rxdr); + + if (in) + *in++ = byte; + toread--; + } + } + ret = rkspi_wait_till_not_busy(regs); + if (ret) + break; + len -= todo; + } + + /* Deassert CS after transfer */ + if (flags & SPI_XFER_END) + spi_cs_deactivate(regs, slave_plat->cs); + + rkspi_enable_chip(regs, false); + + return ret; +} + +static int rockchip_spi_set_speed(struct udevice *bus, uint speed) +{ + struct rockchip_spi_priv *priv = dev_get_priv(bus); + + if (speed > 48000000) + return -EINVAL; + if (speed > priv->max_freq) + speed = priv->max_freq; + priv->speed_hz = speed; + + return 0; +} + +static int rockchip_spi_set_mode(struct udevice *bus, uint mode) +{ + struct rockchip_spi_priv *priv = dev_get_priv(bus); + + priv->mode = mode; + + return 0; +} + +static const struct dm_spi_ops rockchip_spi_ops = { + .claim_bus = rockchip_spi_claim_bus, + .release_bus = rockchip_spi_release_bus, + .xfer = rockchip_spi_xfer, + .set_speed = rockchip_spi_set_speed, + .set_mode = rockchip_spi_set_mode, + /* + * cs_info is not needed, since we require all chip selects to be + * in the device tree explicitly + */ +}; + +static const struct udevice_id rockchip_spi_ids[] = { + { .compatible = "rockchip,rk3288-spi" }, + { } +}; + +U_BOOT_DRIVER(rockchip_spi) = { + .name = "rockchip_spi", + .id = UCLASS_SPI, + .of_match = rockchip_spi_ids, + .ops = &rockchip_spi_ops, + .ofdata_to_platdata = rockchip_spi_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct rockchip_spi_platdata), + .priv_auto_alloc_size = sizeof(struct rockchip_spi_priv), + .probe = rockchip_spi_probe, +}; diff --git a/drivers/spi/rk_spi.h b/drivers/spi/rk_spi.h new file mode 100644 index 0000000..bfb1739 --- /dev/null +++ b/drivers/spi/rk_spi.h @@ -0,0 +1,121 @@ +/* + * SPI driver for rockchip + * + * (C) Copyright 2015 Google, Inc + * + * (C) Copyright 2008-2013 Rockchip Electronics + * Peter, Software Engineering, . + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __RK_SPI_H +#define __RK_SPI_H + +struct rockchip_spi { + u32 ctrlr0; + u32 ctrlr1; + u32 enr; + u32 ser; + u32 baudr; + u32 txftlr; + u32 rxftlr; + u32 txflr; + u32 rxflr; + u32 sr; + u32 ipr; + u32 imr; + u32 isr; + u32 risr; + u32 icr; + u32 dmacr; + u32 dmatdlr; + u32 dmardlr; /* 0x44 */ + u32 reserved[0xef]; + u32 txdr[0x100]; /* 0x400 */ + u32 rxdr[0x100]; /* 0x800 */ +}; + +/* CTRLR0 */ +enum { + DFS_SHIFT = 0, /* Data Frame Size */ + DFS_MASK = 3, + DFS_4BIT = 0, + DFS_8BIT, + DFS_16BIT, + DFS_RESV, + + CFS_SHIFT = 2, /* Control Frame Size */ + CFS_MASK = 0xf, + + SCPH_SHIFT = 6, /* Serial Clock Phase */ + SCPH_MASK = 1, + SCPH_TOGMID = 0, /* SCLK toggles in middle of first data bit */ + SCPH_TOGSTA, /* SCLK toggles at start of first data bit */ + + SCOL_SHIFT = 7, /* Serial Clock Polarity */ + SCOL_MASK = 1, + SCOL_LOW = 0, /* Inactive state of serial clock is low */ + SCOL_HIGH, /* Inactive state of serial clock is high */ + + CSM_SHIFT = 8, /* Chip Select Mode */ + CSM_MASK = 0x3, + CSM_KEEP = 0, /* ss_n stays low after each frame */ + CSM_HALF, /* ss_n high for half sclk_out cycles */ + CSM_ONE, /* ss_n high for one sclk_out cycle */ + CSM_RESV, + + SSN_DELAY_SHIFT = 10, /* SSN to Sclk_out delay */ + SSN_DELAY_MASK = 1, + SSN_DELAY_HALF = 0, /* 1/2 sclk_out cycle */ + SSN_DELAY_ONE = 1, /* 1 sclk_out cycle */ + + SEM_SHIFT = 11, /* Serial Endian Mode */ + SEM_MASK = 1, + SEM_LITTLE = 0, /* little endian */ + SEM_BIG, /* big endian */ + + FBM_SHIFT = 12, /* First Bit Mode */ + FBM_MASK = 1, + FBM_MSB = 0, /* first bit is MSB */ + FBM_LSB, /* first bit in LSB */ + + HALF_WORD_TX_SHIFT = 13, /* Byte and Halfword Transform */ + HALF_WORD_MASK = 1, + HALF_WORD_ON = 0, /* apb 16bit write/read, spi 8bit write/read */ + HALF_WORD_OFF, /* apb 8bit write/read, spi 8bit write/read */ + + RXDSD_SHIFT = 14, /* Rxd Sample Delay, in cycles */ + RXDSD_MASK = 3, + + FRF_SHIFT = 16, /* Frame Format */ + FRF_MASK = 3, + FRF_SPI = 0, /* Motorola SPI */ + FRF_SSP, /* Texas Instruments SSP*/ + FRF_MICROWIRE, /* National Semiconductors Microwire */ + FRF_RESV, + + TMOD_SHIFT = 18, /* Transfer Mode */ + TMOD_MASK = 3, + TMOD_TR = 0, /* xmit & recv */ + TMOD_TO, /* xmit only */ + TMOD_RO, /* recv only */ + TMOD_RESV, + + OMOD_SHIFT = 20, /* Operation Mode */ + OMOD_MASK = 1, + OMOD_MASTER = 0, /* Master Mode */ + OMOD_SLAVE, /* Slave Mode */ +}; + +/* SR */ +enum { + SR_MASK = 0x7f, + SR_BUSY = 1 << 0, + SR_TF_FULL = 1 << 1, + SR_TF_EMPT = 1 << 2, + SR_RF_EMPT = 1 << 3, + SR_RF_FULL = 1 << 4, +}; + +#endif /* __RK_SPI_H */