@@ -674,6 +674,14 @@ static int setup_board_part2(void)
bd->bi_ipbfreq = gd->arch.ipb_clk;
bd->bi_pcifreq = gd->pci_clk;
#endif /* CONFIG_MPC5xxx */
+#if defined(CONFIG_M68K) && defined(CONFIG_PCI)
+ bd->bi_pcifreq = gd->pci_clk;
+#endif
+#if defined(CONFIG_EXTRA_CLOCK)
+ bd->bi_inpfreq = gd->arch.inp_clk; /* input Freq in Hz */
+ bd->bi_vcofreq = gd->arch.vco_clk; /* vco Freq in Hz */
+ bd->bi_flbfreq = gd->arch.flb_clk; /* flexbus Freq in Hz */
+#endif
return 0;
}
@@ -744,7 +744,7 @@ init_fnc_t init_sequence_r[] = {
initr_flash,
#endif
INIT_FUNC_WATCHDOG_RESET
-#if defined(CONFIG_PPC)
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
/* initialize higher level parts of CPU like time base and timers */
cpu_init_r,
#endif
@@ -62,10 +62,15 @@ typedef struct bd_info {
#if defined(CONFIG_MPC512X)
unsigned long bi_ipsfreq; /* IPS Bus Freq, in MHz */
#endif /* CONFIG_MPC512X */
-#if defined(CONFIG_MPC5xxx)
+#if defined(CONFIG_MPC5xxx) || defined(CONFIG_M68K)
unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */
unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */
#endif
+#if defined(CONFIG_EXTRA_CLOCK)
+ unsigned long bi_inpfreq; /* input Freq in MHz */
+ unsigned long bi_vcofreq; /* vco Freq in MHz */
+ unsigned long bi_flbfreq; /* Flexbus Freq in MHz */
+#endif
#if defined(CONFIG_405) || \
defined(CONFIG_405GP) || \
defined(CONFIG_405EP) || \
@@ -22,6 +22,8 @@
#define CONFIG_M54451 /* define processor type */
#define CONFIG_M54451EVB /* M54451EVB board */
+#define CONFIG_DISPLAY_BOARDINFO
+
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
@@ -22,6 +22,8 @@
#define CONFIG_M54455 /* define processor type */
#define CONFIG_M54455EVB /* M54455EVB board */
+#define CONFIG_DISPLAY_BOARDINFO
+
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
@@ -22,11 +22,13 @@
#define CONFIG_M547x /* define processor type */
#define CONFIG_M5475 /* define processor type */
+#define CONFIG_DISPLAY_BOARDINFO
+
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_HW_WATCHDOG
+#undef CONFIG_HW_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */
/* Command line configuration */
@@ -22,11 +22,13 @@
#define CONFIG_M548x /* define processor type */
#define CONFIG_M5485 /* define processor type */
+#define CONFIG_DISPLAY_BOARDINFO
+
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CONFIG_HW_WATCHDOG
+#undef CONFIG_HW_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */
/* Command line configuration */
This patch adds generic board support for MCF547X/8X and MCF5445X. It is based on the patch about common generic board support for M68K architecture sent by Angelo. Signed-off-by: Alison Wang <alison.wang@freescale.com> --- common/board_f.c | 8 ++++++++ common/board_r.c | 2 +- include/asm-generic/u-boot.h | 7 ++++++- include/configs/M54451EVB.h | 2 ++ include/configs/M54455EVB.h | 2 ++ include/configs/M5475EVB.h | 4 +++- include/configs/M5485EVB.h | 4 +++- 7 files changed, 25 insertions(+), 4 deletions(-)