diff mbox

[U-Boot,2/2] ot1200: add eeprom command to non-SPL build

Message ID 1423664425-20846-2-git-send-email-christian.gmeiner@gmail.com
State Awaiting Upstream
Delegated to: Stefano Babic
Headers show

Commit Message

Christian Gmeiner Feb. 11, 2015, 2:20 p.m. UTC 
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
---
 include/configs/ot1200.h | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Stefano Babic Feb. 17, 2015, 9:38 a.m. UTC | #1 
On 11/02/2015 15:20, Christian Gmeiner wrote:
> Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
> ---
>  include/configs/ot1200.h | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h
> index c061e93..3c60b4f 100644
> --- a/include/configs/ot1200.h
> +++ b/include/configs/ot1200.h
> @@ -131,6 +131,16 @@
>  #define CONFIG_PHYLIB
>  #define CONFIG_PHY_SMSC
>  
> +#ifndef CONFIG_SPL
> +#define CONFIG_CMD_EEPROM
> +#define CONFIG_ENV_EEPROM_IS_ON_I2C
> +#define CONFIG_SYS_I2C_EEPROM_BUS             1
> +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN        1
> +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     3
> +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
> +#define CONFIG_SYS_I2C_MULTI_EEPROMS
> +#endif
> +
>  /* Miscellaneous commands */
>  #define CONFIG_CMD_BMODE
>  #define CONFIG_CMD_SETEXPR
> 

Acked-by: Stefano Babic <sbabic@denx.de>

Best regards,
Stefano Babic
Stefano Babic Feb. 17, 2015, 9:53 a.m. UTC | #2 
On 11/02/2015 15:20, Christian Gmeiner wrote:
> Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
> ---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic
diff mbox

Patch

diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h
index c061e93..3c60b4f 100644
--- a/include/configs/ot1200.h
+++ b/include/configs/ot1200.h
@@ -131,6 +131,16 @@ 
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_SMSC
 
+#ifndef CONFIG_SPL
+#define CONFIG_CMD_EEPROM
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define CONFIG_SYS_I2C_EEPROM_BUS             1
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN        1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#endif
+
 /* Miscellaneous commands */
 #define CONFIG_CMD_BMODE
 #define CONFIG_CMD_SETEXPR