@@ -28,6 +28,8 @@
#include <asm/imx-common/video.h>
#include <asm/arch/crm_regs.h>
#include <pca953x.h>
+#include <power/pmic.h>
+#include "../common/pfuze.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -48,6 +50,8 @@ DECLARE_GLOBAL_DATA_PTR;
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+#define I2C_PMIC 1
+
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
@@ -364,6 +368,17 @@ int board_spi_cs_gpio(unsigned bus, unsigned cs)
}
#endif
+int power_init_board(void)
+{
+ struct pmic *p;
+
+ p = pfuze_common_init(I2C_PMIC);
+ if (!p)
+ return -ENODEV;
+
+ return 0;
+}
+
#ifdef CONFIG_CMD_BMODE
static const struct boot_mode board_boot_modes[] = {
/* 4 bit bus width */
@@ -48,4 +48,10 @@
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED 100000
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+
#endif /* __MX6QSABREAUTO_CONFIG_H */
Add the pfuze100 initialization in power_init_board for imx6q/dl sabreauto board. Signed-off-by: Ye.Li <B37916@freescale.com> --- Changes since v1: - Change to use pfuze common init function for sabre boards. Changes since v2: - Move the pfuze init to power_init_board board/freescale/mx6qsabreauto/mx6qsabreauto.c | 15 +++++++++++++++ include/configs/mx6qsabreauto.h | 6 ++++++ 2 files changed, 21 insertions(+), 0 deletions(-)