Message ID | 1404475407-4486-3-git-send-email-ivan.khoronzhuk@ti.com |
---|---|
State | Accepted |
Delegated to: | Tom Rini |
Headers | show |
On Fri, Jul 04, 2014 at 03:03:26PM +0300, Khoronzhuk, Ivan wrote: > Add support for NAND gpheader image. TI Keystone2 ROM bootloader > expects 8 bytes of trailing zeroes in the nand u-boot image. > So add zeros at the end of the nand gph image. > > Acked-by: Murali Karicheri <m-karicheri2@ti.com> > Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Applied to u-boot-ti/master, thanks!
diff --git a/Makefile b/Makefile index 966fd14..76a712e 100644 --- a/Makefile +++ b/Makefile @@ -937,6 +937,12 @@ OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE $(call if_changed,pad_cat) +MKIMAGEFLAGS_u-boot-nand.gph = -A $(ARCH) -T gpimage -C none \ + -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -n U-Boot +u-boot-nand.gph: u-boot.bin FORCE + $(call if_changed,mkimage) + @dd if=/dev/zero bs=8 count=1 2>/dev/null >> $@ + ifneq ($(CONFIG_SUNXI),) OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \ --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff