diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 6005f7e..da2b5f8 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_DNET) += dnet.o
 obj-$(CONFIG_E1000) += e1000.o
 obj-$(CONFIG_E1000_SPI) += e1000_spi.o
 obj-$(CONFIG_EEPRO100) += eepro100.o
+obj-$(CONFIG_SUNXI_EMAC) += sunxi_emac.o
 obj-$(CONFIG_ENC28J60) += enc28j60.o
 obj-$(CONFIG_EP93XX) += ep93xx_eth.o
 obj-$(CONFIG_ETHOC) += ethoc.o
@@ -51,7 +52,6 @@ obj-$(CONFIG_RTL8169) += rtl8169.o
 obj-$(CONFIG_SH_ETHER) += sh_eth.o
 obj-$(CONFIG_SMC91111) += smc91111.o
 obj-$(CONFIG_SMC911X) += smc911x.o
-obj-$(CONFIG_SUNXI_WEMAC) += sunxi_wemac.o
 obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
 obj-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o
 obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o
diff --git a/drivers/net/sunxi_emac.c b/drivers/net/sunxi_emac.c
new file mode 100644
index 0000000..5a06d68
--- /dev/null
+++ b/drivers/net/sunxi_emac.c
@@ -0,0 +1,521 @@
+/*
+ * sunxi_emac.c -- Allwinner A10 ethernet driver
+ *
+ * (C) Copyright 2012, Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <malloc.h>
+#include <miiphy.h>
+#include <net.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+
+/* EMAC register  */
+struct emac_regs {
+	u32 ctl;	/* 0x00 */
+	u32 tx_mode;	/* 0x04 */
+	u32 tx_flow;	/* 0x08 */
+	u32 tx_ctl0;	/* 0x0c */
+	u32 tx_ctl1;	/* 0x10 */
+	u32 tx_ins;	/* 0x14 */
+	u32 tx_pl0;	/* 0x18 */
+	u32 tx_pl1;	/* 0x1c */
+	u32 tx_sta;	/* 0x20 */
+	u32 tx_io_data;	/* 0x24 */
+	u32 tx_io_data1;/* 0x28 */
+	u32 tx_tsvl0;	/* 0x2c */
+	u32 tx_tsvh0;	/* 0x30 */
+	u32 tx_tsvl1;	/* 0x34 */
+	u32 tx_tsvh1;	/* 0x38 */
+	u32 rx_ctl;	/* 0x3c */
+	u32 rx_hash0;	/* 0x40 */
+	u32 rx_hash1;	/* 0x44 */
+	u32 rx_sta;	/* 0x48 */
+	u32 rx_io_data;	/* 0x4c */
+	u32 rx_fbc;	/* 0x50 */
+	u32 int_ctl;	/* 0x54 */
+	u32 int_sta;	/* 0x58 */
+	u32 mac_ctl0;	/* 0x5c */
+	u32 mac_ctl1;	/* 0x60 */
+	u32 mac_ipgt;	/* 0x64 */
+	u32 mac_ipgr;	/* 0x68 */
+	u32 mac_clrt;	/* 0x6c */
+	u32 mac_maxf;	/* 0x70 */
+	u32 mac_supp;	/* 0x74 */
+	u32 mac_test;	/* 0x78 */
+	u32 mac_mcfg;	/* 0x7c */
+	u32 mac_mcmd;	/* 0x80 */
+	u32 mac_madr;	/* 0x84 */
+	u32 mac_mwtd;	/* 0x88 */
+	u32 mac_mrdd;	/* 0x8c */
+	u32 mac_mind;	/* 0x90 */
+	u32 mac_ssrr;	/* 0x94 */
+	u32 mac_a0;	/* 0x98 */
+	u32 mac_a1;	/* 0x9c */
+};
+
+/* SRAMC register  */
+struct sunxi_sramc_regs {
+	u32 ctrl0;
+	u32 ctrl1;
+};
+
+/* 0: Disable       1: Aborted frame enable(default) */
+#define EMAC_TX_AB_M		(0x1 << 0)
+/* 0: CPU           1: DMA(default) */
+#define EMAC_TX_TM		(0x1 << 1)
+
+#define EMAC_TX_SETUP		(0)
+
+/* 0: DRQ asserted  1: DRQ automatically(default) */
+#define EMAC_RX_DRQ_MODE	(0x1 << 1)
+/* 0: CPU           1: DMA(default) */
+#define EMAC_RX_TM		(0x1 << 2)
+/* 0: Normal(default)        1: Pass all Frames */
+#define EMAC_RX_PA		(0x1 << 4)
+/* 0: Normal(default)        1: Pass Control Frames */
+#define EMAC_RX_PCF		(0x1 << 5)
+/* 0: Normal(default)        1: Pass Frames with CRC Error */
+#define EMAC_RX_PCRCE		(0x1 << 6)
+/* 0: Normal(default)        1: Pass Frames with Length Error */
+#define EMAC_RX_PLE		(0x1 << 7)
+/* 0: Normal                 1: Pass Frames length out of range(default) */
+#define EMAC_RX_POR		(0x1 << 8)
+/* 0: Not accept             1: Accept unicast Packets(default) */
+#define EMAC_RX_UCAD		(0x1 << 16)
+/* 0: Normal(default)        1: DA Filtering */
+#define EMAC_RX_DAF		(0x1 << 17)
+/* 0: Not accept             1: Accept multicast Packets(default) */
+#define EMAC_RX_MCO		(0x1 << 20)
+/* 0: Disable(default)       1: Enable Hash filter */
+#define EMAC_RX_MHF		(0x1 << 21)
+/* 0: Not accept             1: Accept Broadcast Packets(default) */
+#define EMAC_RX_BCO		(0x1 << 22)
+/* 0: Disable(default)       1: Enable SA Filtering */
+#define EMAC_RX_SAF		(0x1 << 24)
+/* 0: Normal(default)        1: Inverse Filtering */
+#define EMAC_RX_SAIF		(0x1 << 25)
+
+#define EMAC_RX_SETUP		(EMAC_RX_POR | EMAC_RX_UCAD | EMAC_RX_DAF | \
+				 EMAC_RX_MCO | EMAC_RX_BCO)
+
+/* 0: Disable                1: Enable Receive Flow Control(default) */
+#define EMAC_MAC_CTL0_RFC	(0x1 << 2)
+/* 0: Disable                1: Enable Transmit Flow Control(default) */
+#define EMAC_MAC_CTL0_TFC	(0x1 << 3)
+
+#define EMAC_MAC_CTL0_SETUP	(EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC)
+
+/* 0: Disable                1: Enable MAC Frame Length Checking(default) */
+#define EMAC_MAC_CTL1_FLC	(0x1 << 1)
+/* 0: Disable(default)       1: Enable Huge Frame */
+#define EMAC_MAC_CTL1_HF	(0x1 << 2)
+/* 0: Disable(default)       1: Enable MAC Delayed CRC */
+#define EMAC_MAC_CTL1_DCRC	(0x1 << 3)
+/* 0: Disable                1: Enable MAC CRC(default) */
+#define EMAC_MAC_CTL1_CRC	(0x1 << 4)
+/* 0: Disable                1: Enable MAC PAD Short frames(default) */
+#define EMAC_MAC_CTL1_PC	(0x1 << 5)
+/* 0: Disable(default)       1: Enable MAC PAD Short frames and append CRC */
+#define EMAC_MAC_CTL1_VC	(0x1 << 6)
+/* 0: Disable(default)       1: Enable MAC auto detect Short frames */
+#define EMAC_MAC_CTL1_ADP	(0x1 << 7)
+/* 0: Disable(default)       1: Enable */
+#define EMAC_MAC_CTL1_PRE	(0x1 << 8)
+/* 0: Disable(default)       1: Enable */
+#define EMAC_MAC_CTL1_LPE	(0x1 << 9)
+/* 0: Disable(default)       1: Enable no back off */
+#define EMAC_MAC_CTL1_NB	(0x1 << 12)
+/* 0: Disable(default)       1: Enable */
+#define EMAC_MAC_CTL1_BNB	(0x1 << 13)
+/* 0: Disable(default)       1: Enable */
+#define EMAC_MAC_CTL1_ED	(0x1 << 14)
+
+#define EMAC_MAC_CTL1_SETUP	(EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \
+				 EMAC_MAC_CTL1_PC)
+
+#define EMAC_MAC_IPGT		0x15
+
+#define EMAC_MAC_NBTB_IPG1	0xc
+#define EMAC_MAC_NBTB_IPG2	0x12
+
+#define EMAC_MAC_CW		0x37
+#define EMAC_MAC_RM		0xf
+
+#define EMAC_MAC_MFL		0x0600
+
+/* Receive status */
+#define EMAC_CRCERR		(0x1 << 4)
+#define EMAC_LENERR		(0x3 << 5)
+
+#define DMA_CPU_TRRESHOLD	2000
+
+struct emac_eth_dev {
+	u32 speed;
+	u32 duplex;
+	u32 phy_configured;
+	int link_printed;
+};
+
+struct emac_rxhdr {
+	s16 rx_len;
+	u16 rx_status;
+};
+
+static void emac_inblk_32bit(void *reg, void *data, int count)
+{
+	int cnt = (count + 3) >> 2;
+
+	if (cnt) {
+		u32 *buf = data;
+
+		do {
+			u32 x = readl(reg);
+			*buf++ = x;
+		} while (--cnt);
+	}
+}
+
+static void emac_outblk_32bit(void *reg, void *data, int count)
+{
+	int cnt = (count + 3) >> 2;
+
+	if (cnt) {
+		const u32 *buf = data;
+
+		do {
+			writel(*buf++, reg);
+		} while (--cnt);
+	}
+}
+
+/* Read a word from phyxcer */
+static int emac_phy_read(const char *devname, unsigned char addr,
+			  unsigned char reg, unsigned short *value)
+{
+	struct eth_device *dev = eth_get_dev_by_name(devname);
+	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+
+	/* issue the phy address and reg */
+	writel(addr << 8 | reg, &regs->mac_madr);
+
+	/* pull up the phy io line */
+	writel(0x1, &regs->mac_mcmd);
+
+	/* Wait read complete */
+	mdelay(1);
+
+	/* push down the phy io line */
+	writel(0x0, &regs->mac_mcmd);
+
+	/* and write data */
+	*value = readl(&regs->mac_mrdd);
+
+	return 0;
+}
+
+/* Write a word to phyxcer */
+static int emac_phy_write(const char *devname, unsigned char addr,
+			   unsigned char reg, unsigned short value)
+{
+	struct eth_device *dev = eth_get_dev_by_name(devname);
+	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+
+	/* issue the phy address and reg */
+	writel(addr << 8 | reg, &regs->mac_madr);
+
+	/* pull up the phy io line */
+	writel(0x1, &regs->mac_mcmd);
+
+	/* Wait write complete */
+	mdelay(1);
+
+	/* push down the phy io line */
+	writel(0x0, &regs->mac_mcmd);
+
+	/* and write data */
+	writel(value, &regs->mac_mwtd);
+
+	return 0;
+}
+
+static void emac_setup(struct eth_device *dev)
+{
+	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+	u32 reg_val;
+	u16 phy_val;
+	u32 duplex_flag;
+
+	/* Set up TX */
+	writel(EMAC_TX_SETUP, &regs->tx_mode);
+
+	/* Set up RX */
+	writel(EMAC_RX_SETUP, &regs->rx_ctl);
+
+	/* Set MAC */
+	/* Set MAC CTL0 */
+	writel(EMAC_MAC_CTL0_SETUP, &regs->mac_ctl0);
+
+	/* Set MAC CTL1 */
+	emac_phy_read(dev->name, 1, 0, &phy_val);
+	debug("PHY SETUP, reg 0 value: %x\n", phy_val);
+	duplex_flag = !!(phy_val & (1 << 8));
+
+	reg_val = 0;
+	if (duplex_flag)
+		reg_val = (0x1 << 0);
+	writel(EMAC_MAC_CTL1_SETUP | reg_val, &regs->mac_ctl1);
+
+	/* Set up IPGT */
+	writel(EMAC_MAC_IPGT, &regs->mac_ipgt);
+
+	/* Set up IPGR */
+	writel(EMAC_MAC_NBTB_IPG2 | (EMAC_MAC_NBTB_IPG1 << 8), &regs->mac_ipgr);
+
+	/* Set up Collison window */
+	writel(EMAC_MAC_RM | (EMAC_MAC_CW << 8), &regs->mac_clrt);
+
+	/* Set up Max Frame Length */
+	writel(EMAC_MAC_MFL, &regs->mac_maxf);
+}
+
+static void emac_reset(struct eth_device *dev)
+{
+	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+
+	debug("resetting device\n");
+
+	/* RESET device */
+	writel(0, &regs->ctl);
+	udelay(200);
+
+	writel(1, &regs->ctl);
+	udelay(200);
+}
+
+static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd)
+{
+	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+	struct emac_eth_dev *priv = dev->priv;
+	u16 phy_reg;
+
+	/* Init EMAC */
+
+	/* Flush RX FIFO */
+	setbits_le32(&regs->rx_ctl, 0x8);
+	udelay(1);
+
+	/* Init MAC */
+
+	/* Soft reset MAC */
+	clrbits_le32(&regs->mac_ctl0, 0x1 << 15);
+
+	/* Clear RX counter */
+	writel(0x0, &regs->rx_fbc);
+	udelay(1);
+
+	/* Set up EMAC */
+	emac_setup(dev);
+
+	writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 |
+	       dev->enetaddr[2], &regs->mac_a1);
+	writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 |
+	       dev->enetaddr[5], &regs->mac_a0);
+
+	mdelay(1);
+
+	emac_reset(dev);
+
+	/* PHY POWER UP */
+	emac_phy_read(dev->name, 1, 0, &phy_reg);
+	emac_phy_write(dev->name, 1, 0, phy_reg & (~(0x1 << 11)));
+	mdelay(1);
+
+	emac_phy_read(dev->name, 1, 0, &phy_reg);
+
+	priv->speed = miiphy_speed(dev->name, 0);
+	priv->duplex = miiphy_duplex(dev->name, 0);
+
+	/* Print link status only once */
+	if (!priv->link_printed) {
+		printf("ENET Speed is %d Mbps - %s duplex connection\n",
+		       priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL");
+		priv->link_printed = 1;
+	}
+
+	/* Set EMAC SPEED depend on PHY */
+	clrsetbits_le32(&regs->mac_supp, 1 << 8,
+			((phy_reg & (0x1 << 13)) >> 13) << 8);
+
+	/* Set duplex depend on phy */
+	clrsetbits_le32(&regs->mac_ctl1, 1 << 0,
+			((phy_reg & (0x1 << 8)) >> 8) << 0);
+
+	/* Enable RX/TX */
+	setbits_le32(&regs->ctl, 0x7);
+
+	return 0;
+}
+
+static void sunxi_emac_eth_halt(struct eth_device *dev)
+{
+	/* Nothing to do here */
+}
+
+static int sunxi_emac_eth_recv(struct eth_device *dev)
+{
+	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+	struct emac_rxhdr rxhdr;
+	u32 rxcount;
+	u32 reg_val;
+	int rx_len;
+	int rx_status;
+	int good_packet;
+
+	/* Check packet ready or not */
+
+	/* Race warning: The first packet might arrive with
+	 * the interrupts disabled, but the second will fix
+	 */
+	rxcount = readl(&regs->rx_fbc);
+	if (!rxcount) {
+		/* Had one stuck? */
+		rxcount = readl(&regs->rx_fbc);
+		if (!rxcount)
+			return 0;
+	}
+
+	reg_val = readl(&regs->rx_io_data);
+	if (reg_val != 0x0143414d) {
+		/* Disable RX */
+		clrbits_le32(&regs->ctl, 0x1 << 2);
+
+		/* Flush RX FIFO */
+		setbits_le32(&regs->rx_ctl, 0x1 << 3);
+		while (readl(&regs->rx_ctl) & (0x1 << 3))
+			;
+
+		/* Enable RX */
+		setbits_le32(&regs->ctl, 0x1 << 2);
+
+		return 0;
+	}
+
+	/* A packet ready now
+	 * Get status/length
+	 */
+	good_packet = 1;
+
+	emac_inblk_32bit(&regs->rx_io_data, &rxhdr, sizeof(rxhdr));
+
+	rx_len = rxhdr.rx_len;
+	rx_status = rxhdr.rx_status;
+
+	/* Packet Status check */
+	if (rx_len < 0x40) {
+		good_packet = 0;
+		debug("RX: Bad Packet (runt)\n");
+	}
+
+	/* rx_status is identical to RSR register. */
+	if (0 & rx_status & (EMAC_CRCERR | EMAC_LENERR)) {
+		good_packet = 0;
+		if (rx_status & EMAC_CRCERR)
+			printf("crc error\n");
+		if (rx_status & EMAC_LENERR)
+			printf("length error\n");
+	}
+
+	/* Move data from EMAC */
+	if (good_packet) {
+		if (rx_len > DMA_CPU_TRRESHOLD) {
+			printf("Received packet is too big (len=%d)\n", rx_len);
+		} else {
+			emac_inblk_32bit((void *)&regs->rx_io_data,
+					 NetRxPackets[0], rx_len);
+
+			/* Pass to upper layer */
+			NetReceive(NetRxPackets[0], rx_len);
+			return rx_len;
+		}
+	}
+
+	return 0;
+}
+
+static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int len)
+{
+	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+
+	/* Select channel 0 */
+	writel(0, &regs->tx_ins);
+
+	/* Write packet */
+	emac_outblk_32bit((void *)&regs->tx_io_data, packet, len);
+
+	/* Set TX len */
+	writel(len, &regs->tx_pl0);
+
+	/* Start translate from fifo to phy */
+	setbits_le32(&regs->tx_ctl0, 1);
+
+	return 0;
+}
+
+int sunxi_emac_initialize(void)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	struct sunxi_sramc_regs *sram =
+		(struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE;
+	struct emac_regs *regs =
+		(struct emac_regs *)SUNXI_EMAC_BASE;
+	struct eth_device *dev;
+	struct emac_eth_dev *priv;
+	int pin;
+
+	dev = malloc(sizeof(*dev));
+	if (dev == NULL)
+		return -ENOMEM;
+
+	priv = (struct emac_eth_dev *)malloc(sizeof(struct emac_eth_dev));
+	if (!priv) {
+		free(dev);
+		return -ENOMEM;
+	}
+
+	memset(dev, 0, sizeof(*dev));
+	memset(priv, 0, sizeof(struct emac_eth_dev));
+
+	/* Map SRAM to EMAC */
+	setbits_le32(&sram->ctrl1, 0x5 << 2);
+
+	/* Configure pin mux settings for MII Ethernet */
+	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++)
+		sunxi_gpio_set_cfgpin(pin, SUNXI_GPA0_EMAC);
+
+	/* Set up clock gating */
+	setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_EMAC);
+
+	/* Set MII clock */
+	clrsetbits_le32(&regs->mac_mcfg, 0xf << 2, 0xd << 2);
+
+	dev->iobase = (int)regs;
+	dev->priv = priv;
+	dev->init = sunxi_emac_eth_init;
+	dev->halt = sunxi_emac_eth_halt;
+	dev->send = sunxi_emac_eth_send;
+	dev->recv = sunxi_emac_eth_recv;
+	strcpy(dev->name, "emac");
+
+	eth_register(dev);
+
+	miiphy_register(dev->name, emac_phy_read, emac_phy_write);
+
+	return 0;
+}
diff --git a/drivers/net/sunxi_wemac.c b/drivers/net/sunxi_wemac.c
deleted file mode 100644
index 699a381..0000000
--- a/drivers/net/sunxi_wemac.c
+++ /dev/null
@@ -1,525 +0,0 @@
-/*
- * sunxi_wemac.c -- Allwinner A10 ethernet driver
- *
- * (C) Copyright 2012, Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <net.h>
-#include <miiphy.h>
-#include <linux/err.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-
-/* EMAC register  */
-struct wemac_regs {
-	u32 ctl;	/* 0x00 */
-	u32 tx_mode;	/* 0x04 */
-	u32 tx_flow;	/* 0x08 */
-	u32 tx_ctl0;	/* 0x0c */
-	u32 tx_ctl1;	/* 0x10 */
-	u32 tx_ins;	/* 0x14 */
-	u32 tx_pl0;	/* 0x18 */
-	u32 tx_pl1;	/* 0x1c */
-	u32 tx_sta;	/* 0x20 */
-	u32 tx_io_data;	/* 0x24 */
-	u32 tx_io_data1; /* 0x28 */
-	u32 tx_tsvl0;	/* 0x2c */
-	u32 tx_tsvh0;	/* 0x30 */
-	u32 tx_tsvl1;	/* 0x34 */
-	u32 tx_tsvh1;	/* 0x38 */
-	u32 rx_ctl;	/* 0x3c */
-	u32 rx_hash0;	/* 0x40 */
-	u32 rx_hash1;	/* 0x44 */
-	u32 rx_sta;	/* 0x48 */
-	u32 rx_io_data;	/* 0x4c */
-	u32 rx_fbc;	/* 0x50 */
-	u32 int_ctl;	/* 0x54 */
-	u32 int_sta;	/* 0x58 */
-	u32 mac_ctl0;	/* 0x5c */
-	u32 mac_ctl1;	/* 0x60 */
-	u32 mac_ipgt;	/* 0x64 */
-	u32 mac_ipgr;	/* 0x68 */
-	u32 mac_clrt;	/* 0x6c */
-	u32 mac_maxf;	/* 0x70 */
-	u32 mac_supp;	/* 0x74 */
-	u32 mac_test;	/* 0x78 */
-	u32 mac_mcfg;	/* 0x7c */
-	u32 mac_mcmd;	/* 0x80 */
-	u32 mac_madr;	/* 0x84 */
-	u32 mac_mwtd;	/* 0x88 */
-	u32 mac_mrdd;	/* 0x8c */
-	u32 mac_mind;	/* 0x90 */
-	u32 mac_ssrr;	/* 0x94 */
-	u32 mac_a0;	/* 0x98 */
-	u32 mac_a1;	/* 0x9c */
-};
-
-/* SRAMC register  */
-struct sunxi_sramc_regs {
-	u32 ctrl0;
-	u32 ctrl1;
-};
-
-/* 0: Disable       1: Aborted frame enable(default) */
-#define EMAC_TX_AB_M		(0x1 << 0)
-/* 0: CPU           1: DMA(default) */
-#define EMAC_TX_TM		(0x1 << 1)
-
-#define EMAC_TX_SETUP		(0)
-
-/* 0: DRQ asserted  1: DRQ automatically(default) */
-#define EMAC_RX_DRQ_MODE	(0x1 << 1)
-/* 0: CPU           1: DMA(default) */
-#define EMAC_RX_TM		(0x1 << 2)
-/* 0: Normal(default)        1: Pass all Frames */
-#define EMAC_RX_PA		(0x1 << 4)
-/* 0: Normal(default)        1: Pass Control Frames */
-#define EMAC_RX_PCF		(0x1 << 5)
-/* 0: Normal(default)        1: Pass Frames with CRC Error */
-#define EMAC_RX_PCRCE		(0x1 << 6)
-/* 0: Normal(default)        1: Pass Frames with Length Error */
-#define EMAC_RX_PLE		(0x1 << 7)
-/* 0: Normal                 1: Pass Frames length out of range(default) */
-#define EMAC_RX_POR		(0x1 << 8)
-/* 0: Not accept             1: Accept unicast Packets(default) */
-#define EMAC_RX_UCAD		(0x1 << 16)
-/* 0: Normal(default)        1: DA Filtering */
-#define EMAC_RX_DAF		(0x1 << 17)
-/* 0: Not accept             1: Accept multicast Packets(default) */
-#define EMAC_RX_MCO		(0x1 << 20)
-/* 0: Disable(default)       1: Enable Hash filter */
-#define EMAC_RX_MHF		(0x1 << 21)
-/* 0: Not accept             1: Accept Broadcast Packets(default) */
-#define EMAC_RX_BCO		(0x1 << 22)
-/* 0: Disable(default)       1: Enable SA Filtering */
-#define EMAC_RX_SAF		(0x1 << 24)
-/* 0: Normal(default)        1: Inverse Filtering */
-#define EMAC_RX_SAIF		(0x1 << 25)
-
-#define EMAC_RX_SETUP		(EMAC_RX_POR | EMAC_RX_UCAD | EMAC_RX_DAF | \
-				 EMAC_RX_MCO | EMAC_RX_BCO)
-
-/* 0: Disable                1: Enable Receive Flow Control(default) */
-#define EMAC_MAC_CTL0_RFC	(0x1 << 2)
-/* 0: Disable                1: Enable Transmit Flow Control(default) */
-#define EMAC_MAC_CTL0_TFC	(0x1 << 3)
-
-#define EMAC_MAC_CTL0_SETUP	(EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC)
-
-/* 0: Disable                1: Enable MAC Frame Length Checking(default) */
-#define EMAC_MAC_CTL1_FLC	(0x1 << 1)
-/* 0: Disable(default)       1: Enable Huge Frame */
-#define EMAC_MAC_CTL1_HF	(0x1 << 2)
-/* 0: Disable(default)       1: Enable MAC Delayed CRC */
-#define EMAC_MAC_CTL1_DCRC	(0x1 << 3)
-/* 0: Disable                1: Enable MAC CRC(default) */
-#define EMAC_MAC_CTL1_CRC	(0x1 << 4)
-/* 0: Disable                1: Enable MAC PAD Short frames(default) */
-#define EMAC_MAC_CTL1_PC	(0x1 << 5)
-/* 0: Disable(default)       1: Enable MAC PAD Short frames and append CRC */
-#define EMAC_MAC_CTL1_VC	(0x1 << 6)
-/* 0: Disable(default)       1: Enable MAC auto detect Short frames */
-#define EMAC_MAC_CTL1_ADP	(0x1 << 7)
-/* 0: Disable(default)       1: Enable */
-#define EMAC_MAC_CTL1_PRE	(0x1 << 8)
-/* 0: Disable(default)       1: Enable */
-#define EMAC_MAC_CTL1_LPE	(0x1 << 9)
-/* 0: Disable(default)       1: Enable no back off */
-#define EMAC_MAC_CTL1_NB	(0x1 << 12)
-/* 0: Disable(default)       1: Enable */
-#define EMAC_MAC_CTL1_BNB	(0x1 << 13)
-/* 0: Disable(default)       1: Enable */
-#define EMAC_MAC_CTL1_ED	(0x1 << 14)
-
-#define EMAC_MAC_CTL1_SETUP	(EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \
-				 EMAC_MAC_CTL1_PC)
-
-#define EMAC_MAC_IPGT		0x15
-
-#define EMAC_MAC_NBTB_IPG1	0xC
-#define EMAC_MAC_NBTB_IPG2	0x12
-
-#define EMAC_MAC_CW		0x37
-#define EMAC_MAC_RM		0xF
-
-#define EMAC_MAC_MFL		0x0600
-
-/* Receive status */
-#define EMAC_CRCERR		(1 << 4)
-#define EMAC_LENERR		(3 << 5)
-
-#define DMA_CPU_TRRESHOLD	2000
-
-struct wemac_eth_dev {
-	u32 speed;
-	u32 duplex;
-	u32 phy_configured;
-	int link_printed;
-};
-
-struct wemac_rxhdr {
-	s16 rx_len;
-	u16 rx_status;
-};
-
-static void wemac_inblk_32bit(void *reg, void *data, int count)
-{
-	int cnt = (count + 3) >> 2;
-
-	if (cnt) {
-		u32 *buf = data;
-
-		do {
-			u32 x = readl(reg);
-			*buf++ = x;
-		} while (--cnt);
-	}
-}
-
-static void wemac_outblk_32bit(void *reg, void *data, int count)
-{
-	int cnt = (count + 3) >> 2;
-
-	if (cnt) {
-		const u32 *buf = data;
-
-		do {
-			writel(*buf++, reg);
-		} while (--cnt);
-	}
-}
-
-/*
- * Read a word from phyxcer
- */
-static int wemac_phy_read(const char *devname, unsigned char addr,
-			  unsigned char reg, unsigned short *value)
-{
-	struct eth_device *dev = eth_get_dev_by_name(devname);
-	struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
-
-	/* issue the phy address and reg */
-	writel(addr << 8 | reg, &regs->mac_madr);
-
-	/* pull up the phy io line */
-	writel(0x1, &regs->mac_mcmd);
-
-	/* Wait read complete */
-	mdelay(1);
-
-	/* push down the phy io line */
-	writel(0x0, &regs->mac_mcmd);
-
-	/* and write data */
-	*value = readl(&regs->mac_mrdd);
-
-	return 0;
-}
-
-/*
- * Write a word to phyxcer
- */
-static int wemac_phy_write(const char *devname, unsigned char addr,
-			   unsigned char reg, unsigned short value)
-{
-	struct eth_device *dev = eth_get_dev_by_name(devname);
-	struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
-
-	/* issue the phy address and reg */
-	writel(addr << 8 | reg, &regs->mac_madr);
-
-	/* pull up the phy io line */
-	writel(0x1, &regs->mac_mcmd);
-
-	/* Wait write complete */
-	mdelay(1);
-
-	/* push down the phy io line */
-	writel(0x0, &regs->mac_mcmd);
-
-	/* and write data */
-	writel(value, &regs->mac_mwtd);
-
-	return 0;
-}
-
-static void emac_setup(struct eth_device *dev)
-{
-	struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
-	u32 reg_val;
-	u16 phy_val;
-	u32 duplex_flag;
-
-	/* Set up TX */
-	writel(EMAC_TX_SETUP, &regs->tx_mode);
-
-	/* Set up RX */
-	writel(EMAC_RX_SETUP, &regs->rx_ctl);
-
-	/* Set MAC */
-	/* Set MAC CTL0 */
-	writel(EMAC_MAC_CTL0_SETUP, &regs->mac_ctl0);
-
-	/* Set MAC CTL1 */
-	wemac_phy_read(dev->name, 1, 0, &phy_val);
-	debug("PHY SETUP, reg 0 value: %x\n", phy_val);
-	duplex_flag = !!(phy_val & (1 << 8));
-
-	reg_val = 0;
-	if (duplex_flag)
-		reg_val = (0x1 << 0);
-	writel(EMAC_MAC_CTL1_SETUP | reg_val, &regs->mac_ctl1);
-
-	/* Set up IPGT */
-	writel(EMAC_MAC_IPGT, &regs->mac_ipgt);
-
-	/* Set up IPGR */
-	writel(EMAC_MAC_NBTB_IPG2 | (EMAC_MAC_NBTB_IPG1 << 8), &regs->mac_ipgr);
-
-	/* Set up Collison window */
-	writel(EMAC_MAC_RM | (EMAC_MAC_CW << 8), &regs->mac_clrt);
-
-	/* Set up Max Frame Length */
-	writel(EMAC_MAC_MFL, &regs->mac_maxf);
-}
-
-static void wemac_reset(struct eth_device *dev)
-{
-	struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
-
-	debug("resetting device\n");
-
-	/* RESET device */
-	writel(0, &regs->ctl);
-	udelay(200);
-
-	writel(1, &regs->ctl);
-	udelay(200);
-}
-
-static int sunxi_wemac_eth_init(struct eth_device *dev, bd_t *bd)
-{
-	struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
-	struct wemac_eth_dev *priv = dev->priv;
-	u16 phy_reg;
-
-	/* Init EMAC */
-
-	/* Flush RX FIFO */
-	setbits_le32(&regs->rx_ctl, 0x8);
-	udelay(1);
-
-	/* Init MAC */
-
-	/* Soft reset MAC */
-	clrbits_le32(&regs->mac_ctl0, 1 << 15);
-
-	/* Set MII clock */
-	clrsetbits_le32(&regs->mac_mcfg, 0xf << 2, 0xd << 2);
-
-	/* Clear RX counter */
-	writel(0x0, &regs->rx_fbc);
-	udelay(1);
-
-	/* Set up EMAC */
-	emac_setup(dev);
-
-	writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 |
-	       dev->enetaddr[2], &regs->mac_a1);
-	writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 |
-	       dev->enetaddr[5], &regs->mac_a0);
-
-	mdelay(1);
-
-	wemac_reset(dev);
-
-	/* PHY POWER UP */
-	wemac_phy_read(dev->name, 1, 0, &phy_reg);
-	wemac_phy_write(dev->name, 1, 0, phy_reg & (~(1 << 11)));
-	mdelay(1);
-
-	wemac_phy_read(dev->name, 1, 0, &phy_reg);
-
-	priv->speed = miiphy_speed(dev->name, 0);
-	priv->duplex = miiphy_duplex(dev->name, 0);
-
-	/* Print link status only once */
-	if (!priv->link_printed) {
-		printf("ENET Speed is %d Mbps - %s duplex connection\n",
-		       priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL");
-		priv->link_printed = 1;
-	}
-
-	/* Set EMAC SPEED depend on PHY */
-	clrsetbits_le32(&regs->mac_supp, 1 << 8,
-			((phy_reg & (1 << 13)) >> 13) << 8);
-
-	/* Set duplex depend on phy */
-	clrsetbits_le32(&regs->mac_ctl1, 1 << 0,
-			((phy_reg & (1 << 8)) >> 8) << 0);
-
-	/* Enable RX/TX */
-	setbits_le32(&regs->ctl, 0x7);
-
-	return 0;
-}
-
-static void sunxi_wemac_eth_halt(struct eth_device *dev)
-{
-	/* Nothing to do here */
-}
-
-static int sunxi_wemac_eth_recv(struct eth_device *dev)
-{
-	struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
-	struct wemac_rxhdr rxhdr;
-	u32 rxcount;
-	u32 reg_val;
-	int rx_len;
-	int rx_status;
-	int good_packet;
-
-	/* Check packet ready or not */
-
-	/*
-	 * Race warning: The first packet might arrive with
-	 * the interrupts disabled, but the second will fix
-	 */
-	rxcount = readl(&regs->rx_fbc);
-	if (!rxcount) {
-		/* Had one stuck? */
-		rxcount = readl(&regs->rx_fbc);
-		if (!rxcount)
-			return 0;
-	}
-
-	reg_val = readl(&regs->rx_io_data);
-	if (reg_val != 0x0143414d) {
-		/* Disable RX */
-		clrbits_le32(&regs->ctl, 1 << 2);
-
-		/* Flush RX FIFO */
-		setbits_le32(&regs->rx_ctl, 1 << 3);
-		while (readl(&regs->rx_ctl) & (1 << 3))
-			;
-
-		/* Enable RX */
-		setbits_le32(&regs->ctl, 1 << 2);
-
-		return 0;
-	}
-
-	/*
-	 * A packet ready now
-	 * Get status/length
-	 */
-	good_packet = 1;
-
-	wemac_inblk_32bit(&regs->rx_io_data, &rxhdr, sizeof(rxhdr));
-
-	rx_len = rxhdr.rx_len;
-	rx_status = rxhdr.rx_status;
-
-	/* Packet Status check */
-	if (rx_len < 0x40) {
-		good_packet = 0;
-		debug("RX: Bad Packet (runt)\n");
-	}
-
-	/* rx_status is identical to RSR register. */
-	if (0 & rx_status & (EMAC_CRCERR | EMAC_LENERR)) {
-		good_packet = 0;
-		if (rx_status & EMAC_CRCERR)
-			printf("crc error\n");
-		if (rx_status & EMAC_LENERR)
-			printf("length error\n");
-	}
-
-	/* Move data from WEMAC */
-	if (good_packet) {
-		if (rx_len > DMA_CPU_TRRESHOLD) {
-			printf("Received packet is too big (len=%d)\n", rx_len);
-		} else {
-			wemac_inblk_32bit((void *)&regs->rx_io_data,
-					  NetRxPackets[0], rx_len);
-
-			/* Pass to upper layer */
-			NetReceive(NetRxPackets[0], rx_len);
-			return rx_len;
-		}
-	}
-
-	return 0;
-}
-
-static int sunxi_wemac_eth_send(struct eth_device *dev, void *packet, int len)
-{
-	struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
-
-	/* Select channel 0 */
-	writel(0, &regs->tx_ins);
-
-	/* Write packet */
-	wemac_outblk_32bit((void *)&regs->tx_io_data, packet, len);
-
-	/* Set TX len */
-	writel(len, &regs->tx_pl0);
-
-	/* Start translate from fifo to phy */
-	setbits_le32(&regs->tx_ctl0, 1);
-
-	return 0;
-}
-
-int sunxi_wemac_initialize(void)
-{
-	struct sunxi_ccm_reg *const ccm =
-		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-	struct sunxi_sramc_regs *sram =
-		(struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE;
-	struct eth_device *dev;
-	struct wemac_eth_dev *priv;
-	int pin;
-
-	dev = malloc(sizeof(*dev));
-	if (dev == NULL)
-		return -ENOMEM;
-
-	priv = (struct wemac_eth_dev *)malloc(sizeof(struct wemac_eth_dev));
-	if (!priv) {
-		free(dev);
-		return -ENOMEM;
-	}
-
-	memset(dev, 0, sizeof(*dev));
-	memset(priv, 0, sizeof(struct wemac_eth_dev));
-
-	/* Map SRAM to EMAC */
-	setbits_le32(&sram->ctrl1, 0x5 << 2);
-
-	/* Configure pin mux settings for MII Ethernet */
-	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++)
-		sunxi_gpio_set_cfgpin(pin, 2);
-
-	/* Set up clock gating */
-	setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_EMAC);
-
-	dev->iobase = SUNXI_EMAC_BASE;
-	dev->priv = priv;
-	dev->init = sunxi_wemac_eth_init;
-	dev->halt = sunxi_wemac_eth_halt;
-	dev->send = sunxi_wemac_eth_send;
-	dev->recv = sunxi_wemac_eth_recv;
-	strcpy(dev->name, "wemac");
-
-	eth_register(dev);
-
-	miiphy_register(dev->name, wemac_phy_read, wemac_phy_write);
-
-	return 0;
-}
diff --git a/include/netdev.h b/include/netdev.h
index 63481ec..e45dd7a 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -78,8 +78,8 @@ int sh_eth_initialize(bd_t *bis);
 int skge_initialize(bd_t *bis);
 int smc91111_initialize(u8 dev_num, int base_addr);
 int smc911x_initialize(u8 dev_num, int base_addr);
+int sunxi_emac_initialize(bd_t *bis);
 int sunxi_gmac_initialize(bd_t *bis);
-int sunxi_wemac_initialize(bd_t *bis);
 int tsi108_eth_initialize(bd_t *bis);
 int uec_standard_init(bd_t *bis);
 int uli526x_initialize(bd_t *bis);
