@@ -21,6 +21,19 @@
#include <environment.h>
#include <command.h>
+/*
+ * sr32 - clear & set a value in a bit range for a 32 bit address
+ */
+static inline void sr32(void *addr, u32 start_bit, u32 num_bits, u32 value)
+{
+ u32 tmp, msk = 0;
+ msk = 1 << num_bits;
+ --msk;
+ tmp = readl((u32)addr) & ~(msk << start_bit);
+ tmp |= value << start_bit;
+ writel(tmp, (u32)addr);
+}
+
/******************************************************************************
* get_sys_clk_speed() - determine reference oscillator speed
* based on known 32kHz clock and gptimer.
@@ -24,19 +24,6 @@ void sdelay(unsigned long loops)
"bne 1b":"=r" (loops):"0"(loops));
}
-/*****************************************************************
- * sr32 - clear & set a value in a bit range for a 32 bit address
- *****************************************************************/
-void sr32(void *addr, u32 start_bit, u32 num_bits, u32 value)
-{
- u32 tmp, msk = 0;
- msk = 1 << num_bits;
- --msk;
- tmp = readl((u32)addr) & ~(msk << start_bit);
- tmp |= value << start_bit;
- writel(tmp, (u32)addr);
-}
-
/*********************************************************************
* wait_on_value() - common routine to allow waiting for changes in
* volatile regs.
@@ -62,7 +62,6 @@ void secureworld_exit(void);
void try_unlock_memory(void);
u32 get_boot_type(void);
void invalidate_dcache(u32);
-void sr32(void *, u32, u32, u32);
u32 wait_on_value(u32, u32, void *, u32);
void sdelay(unsigned long);
void make_cs1_contiguous(void);
@@ -31,7 +31,6 @@ void watchdog_init(void);
u32 get_device_type(void);
void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
void set_muxconf_regs_essential(void);
-void sr32(void *, u32, u32, u32);
u32 wait_on_value(u32, u32, void *, u32);
void sdelay(unsigned long);
void set_pl310_ctrl_reg(u32 val);
@@ -32,7 +32,6 @@ void watchdog_init(void);
u32 get_device_type(void);
void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
void set_muxconf_regs_essential(void);
-void sr32(void *, u32, u32, u32);
u32 wait_on_value(u32, u32, void *, u32);
void sdelay(unsigned long);
void setup_clocks_for_console(void);
The only remaining user of the custom bit manipulation function sr32() is arch/arm/cpu/armv7/omap3/clock.c, so make it a static function in that file to prepare complete removal. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> --- arch/arm/cpu/armv7/omap3/clock.c | 13 +++++++++++++ arch/arm/cpu/armv7/syslib.c | 13 ------------- arch/arm/include/asm/arch-omap3/sys_proto.h | 1 - arch/arm/include/asm/arch-omap4/sys_proto.h | 1 - arch/arm/include/asm/arch-omap5/sys_proto.h | 1 - 5 files changed, 13 insertions(+), 16 deletions(-)