Message ID | 1395390106-20439-3-git-send-email-B45475@freescale.com |
---|---|
State | Accepted |
Delegated to: | York Sun |
Headers | show |
On 03/21/2014 01:21 AM, Zhao Qiang wrote: > Add u-qe support for t1040qds > > Signed-off-by: Zhao Qiang <B45475@freescale.com> > --- > Changes for v2: > - modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and CONFIG_SYS_QE_FW_ADDR > Changes for v3: > - use CONFIG_U_QE instead of CONFIG_PPC_T1040 > Changes for v4: > - ifdef CONFIG_U_QE, include "../../../../drivers/qe/qe.h" > Changes for v5: > - no > Changes for v6: > - rebase > Changes for v7: > - split to two patches, the one to support u-qe and the other is to add u-qe to t1040qds > > board/freescale/t1040qds/t1040qds.c | 27 +++++++++++++++++++++++++++ > include/configs/T1040QDS.h | 3 +++ > 2 files changed, 30 insertions(+) > > diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c > index 3dec447..d50ad42 100644 > --- a/board/freescale/t1040qds/t1040qds.c > +++ b/board/freescale/t1040qds/t1040qds.c > @@ -18,6 +18,7 @@ > #include <asm/fsl_portals.h> > #include <asm/fsl_liodn.h> > #include <fm_eth.h> > +#include <hwconfig.h> > > #include "../common/qixis.h" > #include "t1040qds.h" > @@ -89,6 +90,30 @@ int select_i2c_ch_pca9547(u8 ch) > return 0; > } > > +static void qe_board_setup(void) > +{ > + u8 brdcfg15, brdcfg9; > + > + if (hwconfig("qe") && hwconfig("tdm")) { This is called before environmental variables are relocated to DDR. It will cause a warning. Please use hwconfig_f. York
On 03/26/2014 01:04 PM, York Sun wrote: > On 03/21/2014 01:21 AM, Zhao Qiang wrote: >> >> +static void qe_board_setup(void) >> +{ >> + u8 brdcfg15, brdcfg9; >> + >> + if (hwconfig("qe") && hwconfig("tdm")) { > > > This is called before environmental variables are relocated to DDR. It will > cause a warning. Please use hwconfig_f. > Please fix this patch with a new version. No need to submit other patches in this set. York
On 04/17/2014 07:03 PM, York Sun wrote: > -----Original Message----- > From: Sun York-R58495 > Sent: Thursday, April 17, 2014 7:03 AM > To: Zhao Qiang-B45475; u-boot@lists.denx.de > Cc: Xie Xiaobo-R63061 > Subject: Re: [U-Boot] [PATCH v7 3/3] T1040QDS/U-QE: Add u-qe support to > t1040qds > > On 03/26/2014 01:04 PM, York Sun wrote: > > On 03/21/2014 01:21 AM, Zhao Qiang wrote: > >> > >> +static void qe_board_setup(void) > >> +{ > >> + u8 brdcfg15, brdcfg9; > >> + > >> + if (hwconfig("qe") && hwconfig("tdm")) { > > > > > > This is called before environmental variables are relocated to DDR. It > > will cause a warning. Please use hwconfig_f. > > > > Please fix this patch with a new version. No need to submit other patches > in this set. This upstream patch, qe_board_setup() is called in misc_init_r , it is correct, Doesn't need to change. > > York > Regards, Zhao Qiang
On 04/16/2014 06:39 PM, Zhao Qiang-B45475 wrote: > On 04/17/2014 07:03 PM, York Sun wrote: > >> -----Original Message----- >> From: Sun York-R58495 >> Sent: Thursday, April 17, 2014 7:03 AM >> To: Zhao Qiang-B45475; u-boot@lists.denx.de >> Cc: Xie Xiaobo-R63061 >> Subject: Re: [U-Boot] [PATCH v7 3/3] T1040QDS/U-QE: Add u-qe support to >> t1040qds >> >> On 03/26/2014 01:04 PM, York Sun wrote: >>> On 03/21/2014 01:21 AM, Zhao Qiang wrote: >>>> >>>> +static void qe_board_setup(void) >>>> +{ >>>> + u8 brdcfg15, brdcfg9; >>>> + >>>> + if (hwconfig("qe") && hwconfig("tdm")) { >>> >>> >>> This is called before environmental variables are relocated to DDR. It >>> will cause a warning. Please use hwconfig_f. >>> >> >> Please fix this patch with a new version. No need to submit other patches >> in this set. > > This upstream patch, qe_board_setup() is called in misc_init_r , it is correct, > Doesn't need to change. > OK. Thanks. York
On 03/21/2014 01:21 AM, Zhao Qiang wrote: > Add u-qe support for t1040qds > > Signed-off-by: Zhao Qiang <B45475@freescale.com> > --- > Changes for v2: > - modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and CONFIG_SYS_QE_FW_ADDR > Changes for v3: > - use CONFIG_U_QE instead of CONFIG_PPC_T1040 > Changes for v4: > - ifdef CONFIG_U_QE, include "../../../../drivers/qe/qe.h" > Changes for v5: > - no > Changes for v6: > - rebase > Changes for v7: > - split to two patches, the one to support u-qe and the other is to add u-qe to t1040qds > Applied to u-boot-mpc85xx/master, thanks. York
diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c index 3dec447..d50ad42 100644 --- a/board/freescale/t1040qds/t1040qds.c +++ b/board/freescale/t1040qds/t1040qds.c @@ -18,6 +18,7 @@ #include <asm/fsl_portals.h> #include <asm/fsl_liodn.h> #include <fm_eth.h> +#include <hwconfig.h> #include "../common/qixis.h" #include "t1040qds.h" @@ -89,6 +90,30 @@ int select_i2c_ch_pca9547(u8 ch) return 0; } +static void qe_board_setup(void) +{ + u8 brdcfg15, brdcfg9; + + if (hwconfig("qe") && hwconfig("tdm")) { + brdcfg15 = QIXIS_READ(brdcfg[15]); + /* + * TDMRiser uses QE-TDM + * Route QE_TDM signals to TDM Riser slot + */ + QIXIS_WRITE(brdcfg[15], brdcfg15 | 7); + } else if (hwconfig("qe") && hwconfig("uart")) { + brdcfg15 = QIXIS_READ(brdcfg[15]); + brdcfg9 = QIXIS_READ(brdcfg[9]); + /* + * Route QE_TDM signals to UCC + * ProfiBus controlled by UCC3 + */ + brdcfg15 &= 0xfc; + QIXIS_WRITE(brdcfg[15], brdcfg15 | 2); + QIXIS_WRITE(brdcfg[9], brdcfg9 | 4); + } +} + int board_early_init_r(void) { #ifdef CONFIG_SYS_FLASH_BASE @@ -196,6 +221,8 @@ int misc_init_r(void) } } + qe_board_setup(); + return 0; } diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 84213b8..0340bb4 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -595,6 +595,8 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_DPAA_PME +#define CONFIG_QE +#define CONFIG_U_QE /* Default address of microcode for the Linux Fman driver */ #if defined(CONFIG_SPIFLASH) /* @@ -617,6 +619,7 @@ unsigned long get_board_ddr_clk(void); #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 +#define CONFIG_SYS_QE_FW_ADDR 0xEFF10000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
Add u-qe support for t1040qds Signed-off-by: Zhao Qiang <B45475@freescale.com> --- Changes for v2: - modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and CONFIG_SYS_QE_FW_ADDR Changes for v3: - use CONFIG_U_QE instead of CONFIG_PPC_T1040 Changes for v4: - ifdef CONFIG_U_QE, include "../../../../drivers/qe/qe.h" Changes for v5: - no Changes for v6: - rebase Changes for v7: - split to two patches, the one to support u-qe and the other is to add u-qe to t1040qds board/freescale/t1040qds/t1040qds.c | 27 +++++++++++++++++++++++++++ include/configs/T1040QDS.h | 3 +++ 2 files changed, 30 insertions(+)