@@ -128,10 +128,10 @@ int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
#ifdef CONFIG_SYS_DPAA_RMAN
struct liodn_id_table rman_liodn_tbl[] = {
/* Set RMan block 0-3 liodn offset */
- SET_RMAN_LIODN(0, 678),
- SET_RMAN_LIODN(1, 679),
- SET_RMAN_LIODN(2, 680),
- SET_RMAN_LIODN(3, 681),
+ SET_RMAN_LIODN(0, 6),
+ SET_RMAN_LIODN(1, 7),
+ SET_RMAN_LIODN(2, 8),
+ SET_RMAN_LIODN(3, 9),
};
int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
#endif
@@ -175,10 +175,10 @@ int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
#ifdef CONFIG_SYS_DPAA_RMAN
struct liodn_id_table rman_liodn_tbl[] = {
/* Set RMan block 0-3 liodn offset */
- SET_RMAN_LIODN(0, 678),
- SET_RMAN_LIODN(1, 679),
- SET_RMAN_LIODN(2, 680),
- SET_RMAN_LIODN(3, 681),
+ SET_RMAN_LIODN(0, 6),
+ SET_RMAN_LIODN(1, 7),
+ SET_RMAN_LIODN(2, 8),
+ SET_RMAN_LIODN(3, 9),
};
int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
#endif
@@ -594,6 +594,8 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_DPAA_FMAN
+#define CONFIG_SYS_DPAA_RMAN
+
/* Default address of microcode for the Linux Fman driver */
#if defined(CONFIG_SPIFLASH)
/*
@@ -624,6 +624,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_PMAN
#define CONFIG_SYS_DPAA_DCE
#define CONFIG_SYS_INTERLAKEN
+#define CONFIG_SYS_DPAA_RMAN
/* Default address of microcode for the Linux Fman driver */
#if defined(CONFIG_SPIFLASH)
1. Add CONFIG_SYS_DPAA_RMAN macro to t4240 and b4860. 2. Decrease RMan liodn offset number. SET_RMAN_LIODN() is used to set liodn offset of RMan blocks 0-3. For t4240 and b4860, RMan liodn base is assigned to 922, the original offset number is too large that the liodn (base+offset 922+678 = 1600) is greater than 0x500 the maximum liodn number. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> --- arch/powerpc/cpu/mpc85xx/b4860_ids.c | 8 ++++---- arch/powerpc/cpu/mpc85xx/t4240_ids.c | 8 ++++---- include/configs/B4860QDS.h | 2 ++ include/configs/t4qds.h | 1 + 4 files changed, 11 insertions(+), 8 deletions(-)