Message ID | 1372802418-9010-1-git-send-email-dinguyen@altera.com |
---|---|
State | Accepted |
Delegated to: | Albert ARIBAUD |
Headers | show |
Hi dinguyen@altera.com, On Tue, 2 Jul 2013 17:00:18 -0500, <dinguyen@altera.com> wrote: > From: Dinh Nguyen <dinguyen@altera.com> > > Because the SOCFPGA platform will include support for Cyclone V and > Arria V FPGA parts, renaming socfpga_cyclone5 folder to socfpga to > be more generic. > > Signed-off-by: Dinh Nguyen <dinguyen@altera.com> > Reviewed-by: Pavel Machek <pavel@denx.de> > Cc: Chin Liang See <clsee@altera.com> > Cc: Wolfgang Denk <wd@denx.de> > CC: Pavel Machek <pavel@denx.de> > Cc: Tom Rini <trini@ti.com> > > v2: > - Add Reviewed-by: Pavel Machek > - Cc: Tom Rini > --- Do you really mean that V2 is the exact same code as V1? If it is, then V2 is unneeded. And if V2 is different from V1, then history should tells us the difference(s). Amicalement,
Hi Albert, On Fri, 2013-07-05 at 23:04 +0200, ZY - albert.u.boot wrote: > Hi dinguyen@altera.com, > > On Tue, 2 Jul 2013 17:00:18 -0500, <dinguyen@altera.com> wrote: > > > From: Dinh Nguyen <dinguyen@altera.com> > > > > Because the SOCFPGA platform will include support for Cyclone V and > > Arria V FPGA parts, renaming socfpga_cyclone5 folder to socfpga to > > be more generic. > > > > Signed-off-by: Dinh Nguyen <dinguyen@altera.com> > > Reviewed-by: Pavel Machek <pavel@denx.de> > > Cc: Chin Liang See <clsee@altera.com> > > Cc: Wolfgang Denk <wd@denx.de> > > CC: Pavel Machek <pavel@denx.de> > > Cc: Tom Rini <trini@ti.com> > > > > v2: > > - Add Reviewed-by: Pavel Machek > > - Cc: Tom Rini > > --- > > Do you really mean that V2 is the exact same code as V1? If it is, then > V2 is unneeded. And if V2 is different from V1, then history should > tells us the difference(s). V2 is the same as v1 codewise. So should I resend this a V1 to be applied? Dinh > > Amicalement,
Hi Dinh, On Mon, 8 Jul 2013 11:10:37 -0500, Dinh Nguyen <dinguyen@altera.com> wrote: > Hi Albert, > > On Fri, 2013-07-05 at 23:04 +0200, ZY - albert.u.boot wrote: > > Hi dinguyen@altera.com, > > > > On Tue, 2 Jul 2013 17:00:18 -0500, <dinguyen@altera.com> wrote: > > > > > From: Dinh Nguyen <dinguyen@altera.com> > > > > > > Because the SOCFPGA platform will include support for Cyclone V and > > > Arria V FPGA parts, renaming socfpga_cyclone5 folder to socfpga to > > > be more generic. > > > > > > Signed-off-by: Dinh Nguyen <dinguyen@altera.com> > > > Reviewed-by: Pavel Machek <pavel@denx.de> > > > Cc: Chin Liang See <clsee@altera.com> > > > Cc: Wolfgang Denk <wd@denx.de> > > > CC: Pavel Machek <pavel@denx.de> > > > Cc: Tom Rini <trini@ti.com> > > > > > > v2: > > > - Add Reviewed-by: Pavel Machek > > > - Cc: Tom Rini > > > --- > > > > Do you really mean that V2 is the exact same code as V1? If it is, then > > V2 is unneeded. And if V2 is different from V1, then history should > > tells us the difference(s). > > V2 is the same as v1 codewise. So should I resend this a V1 to be > applied? If V1 is the same as V2 as far as the code is concerned, then there is simply no point in sending V2 or resending V1 again. The V2 history makes me guess you thought it necessary to officialize Pavel's Reviewed-By somehow, but that's unneeded; patchworks takes care of collecting all the {Reviewed,Acked,Tested,...}-by's and providing them when applying the patch through pwclient. > Dinh Amicalement,
Hi! > > > > From: Dinh Nguyen <dinguyen@altera.com> > > > > > > > > Because the SOCFPGA platform will include support for Cyclone V and > > > > Arria V FPGA parts, renaming socfpga_cyclone5 folder to socfpga to > > > > be more generic. > > > > > > > > Signed-off-by: Dinh Nguyen <dinguyen@altera.com> > > > > Reviewed-by: Pavel Machek <pavel@denx.de> > > > > Cc: Chin Liang See <clsee@altera.com> > > > > Cc: Wolfgang Denk <wd@denx.de> > > > > CC: Pavel Machek <pavel@denx.de> > > > > Cc: Tom Rini <trini@ti.com> > > > > > > > > v2: > > > > - Add Reviewed-by: Pavel Machek > > > > - Cc: Tom Rini > > > > --- > > > > > > Do you really mean that V2 is the exact same code as V1? If it is, then > > > V2 is unneeded. And if V2 is different from V1, then history should > > > tells us the difference(s). > > > > V2 is the same as v1 codewise. So should I resend this a V1 to be > > applied? > > If V1 is the same as V2 as far as the code is concerned, then there is > simply no point in sending V2 or resending V1 again. > > The V2 history makes me guess you thought it necessary to officialize > Pavel's Reviewed-By somehow, but that's unneeded; patchworks takes care > of collecting all the {Reviewed,Acked,Tested,...}-by's and providing > them when applying the patch through pwclient. This got pretty confusing lately. Can we just wait for the patches to be applied, or do we need to take some action? Thanks, Pavel
Hi Pavel, On Tue, 9 Jul 2013 01:22:01 +0200, Pavel Machek <pavel@denx.de> wrote: > Hi! > > > > > > From: Dinh Nguyen <dinguyen@altera.com> > > > > > > > > > > Because the SOCFPGA platform will include support for Cyclone V and > > > > > Arria V FPGA parts, renaming socfpga_cyclone5 folder to socfpga to > > > > > be more generic. > > > > > > > > > > Signed-off-by: Dinh Nguyen <dinguyen@altera.com> > > > > > Reviewed-by: Pavel Machek <pavel@denx.de> > > > > > Cc: Chin Liang See <clsee@altera.com> > > > > > Cc: Wolfgang Denk <wd@denx.de> > > > > > CC: Pavel Machek <pavel@denx.de> > > > > > Cc: Tom Rini <trini@ti.com> > > > > > > > > > > v2: > > > > > - Add Reviewed-by: Pavel Machek > > > > > - Cc: Tom Rini > > > > > --- > > > > > > > > Do you really mean that V2 is the exact same code as V1? If it is, then > > > > V2 is unneeded. And if V2 is different from V1, then history should > > > > tells us the difference(s). > > > > > > V2 is the same as v1 codewise. So should I resend this a V1 to be > > > applied? > > > > If V1 is the same as V2 as far as the code is concerned, then there is > > simply no point in sending V2 or resending V1 again. > > > > The V2 history makes me guess you thought it necessary to officialize > > Pavel's Reviewed-By somehow, but that's unneeded; patchworks takes care > > of collecting all the {Reviewed,Acked,Tested,...}-by's and providing > > them when applying the patch through pwclient. > > This got pretty confusing lately. Can we just wait for the patches to > be applied, or do we need to take some action? No, no need to take action; I was just clarifying why V2 was unneeded here, so that similar uneeded new versions are avoided in the future. Since V1 has already been marked as superseded, I'll apply V2 -- after 2013.07 is out. > Thanks, > Pavel Amicalement,
Hi dinguyen@altera.com, On Tue, 2 Jul 2013 17:00:18 -0500, <dinguyen@altera.com> wrote: > From: Dinh Nguyen <dinguyen@altera.com> > > Because the SOCFPGA platform will include support for Cyclone V and > Arria V FPGA parts, renaming socfpga_cyclone5 folder to socfpga to > be more generic. > > Signed-off-by: Dinh Nguyen <dinguyen@altera.com> > Reviewed-by: Pavel Machek <pavel@denx.de> > Cc: Chin Liang See <clsee@altera.com> > Cc: Wolfgang Denk <wd@denx.de> > CC: Pavel Machek <pavel@denx.de> > Cc: Tom Rini <trini@ti.com> > > v2: > - Add Reviewed-by: Pavel Machek > - Cc: Tom Rini > --- > .../altera/{socfpga_cyclone5 => socfpga}/Makefile | 0 > .../socfpga_cyclone5.c | 0 > boards.cfg | 2 +- > 3 files changed, 1 insertion(+), 1 deletion(-) > rename board/altera/{socfpga_cyclone5 => socfpga}/Makefile (100%) > rename board/altera/{socfpga_cyclone5 => socfpga}/socfpga_cyclone5.c (100%) > > diff --git a/board/altera/socfpga_cyclone5/Makefile b/board/altera/socfpga/Makefile > similarity index 100% > rename from board/altera/socfpga_cyclone5/Makefile > rename to board/altera/socfpga/Makefile > diff --git a/board/altera/socfpga_cyclone5/socfpga_cyclone5.c b/board/altera/socfpga/socfpga_cyclone5.c > similarity index 100% > rename from board/altera/socfpga_cyclone5/socfpga_cyclone5.c > rename to board/altera/socfpga/socfpga_cyclone5.c > diff --git a/boards.cfg b/boards.cfg > index c0c4282..eea92d5 100644 > --- a/boards.cfg > +++ b/boards.cfg > @@ -335,7 +335,7 @@ kzm9g arm armv7 kzm9g kmc > armadillo-800eva arm armv7 armadillo-800eva atmark-techno rmobile > zynq arm armv7 zynq xilinx zynq > zynq_dcc arm armv7 zynq xilinx zynq zynq:ZYNQ_DCC > -socfpga_cyclone5 arm armv7 socfpga_cyclone5 altera socfpga > +socfpga_cyclone5 arm armv7 socfpga altera socfpga > actux1_4_16 arm ixp actux1 - - actux1:FLASH2X2 > actux1_4_32 arm ixp actux1 - - actux1:FLASH2X2,RAM_32MB > actux1_8_16 arm ixp actux1 - - actux1:FLASH1X8 Applied to u-boot-arm/master, thanks! Amicalement,
diff --git a/board/altera/socfpga_cyclone5/Makefile b/board/altera/socfpga/Makefile similarity index 100% rename from board/altera/socfpga_cyclone5/Makefile rename to board/altera/socfpga/Makefile diff --git a/board/altera/socfpga_cyclone5/socfpga_cyclone5.c b/board/altera/socfpga/socfpga_cyclone5.c similarity index 100% rename from board/altera/socfpga_cyclone5/socfpga_cyclone5.c rename to board/altera/socfpga/socfpga_cyclone5.c diff --git a/boards.cfg b/boards.cfg index c0c4282..eea92d5 100644 --- a/boards.cfg +++ b/boards.cfg @@ -335,7 +335,7 @@ kzm9g arm armv7 kzm9g kmc armadillo-800eva arm armv7 armadillo-800eva atmark-techno rmobile zynq arm armv7 zynq xilinx zynq zynq_dcc arm armv7 zynq xilinx zynq zynq:ZYNQ_DCC -socfpga_cyclone5 arm armv7 socfpga_cyclone5 altera socfpga +socfpga_cyclone5 arm armv7 socfpga altera socfpga actux1_4_16 arm ixp actux1 - - actux1:FLASH2X2 actux1_4_32 arm ixp actux1 - - actux1:FLASH2X2,RAM_32MB actux1_8_16 arm ixp actux1 - - actux1:FLASH1X8