mbox

[U-Boot,PULL] please pull u-boot-atmel/master

Message ID 1369130366-19960-1-git-send-email-andreas.devel@googlemail.com
State Accepted
Delegated to: Albert ARIBAUD
Headers show

Pull-request

git://git.denx.de/u-boot-atmel.git master

Message

Andreas Bießmann May 21, 2013, 9:59 a.m. UTC 
Dear Albert Aribaud,

please pull the following changes from u-boot-atmel/master into
u-boot-arm/master.

The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:

  at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)

are available in the git repository at:

  git://git.denx.de/u-boot-atmel.git master

for you to fetch changes up to 5ba444f092ae9f68a0bd1f53956be2e69d26cf61:

  ARM: at91: add NAND partition table and index (2013-05-21 11:54:21 +0200)

----------------------------------------------------------------
Bo Shen (6):
      ARM: at91: add Atmel sama5d3 SoC new pmc register
      USB: ohci-at91: support sama5d3x devices
      ARM: atmel: add sama5d3xek support
      ARM: at91: fix and update README.at91 document
      ARM: at91: add at91sam9x5 and sama5d3x information
      ARM: at91: add NAND partition table and index

 MAINTAINERS                                  |    1 +
 arch/arm/cpu/armv7/at91/Makefile             |   52 +++++
 arch/arm/cpu/armv7/at91/clock.c              |  125 ++++++++++++
 arch/arm/cpu/armv7/at91/cpu.c                |   90 +++++++++
 arch/arm/cpu/armv7/at91/reset.c              |   47 +++++
 arch/arm/cpu/armv7/at91/sama5d3_devices.c    |  196 ++++++++++++++++++
 arch/arm/cpu/armv7/at91/timer.c              |  139 +++++++++++++
 arch/arm/include/asm/arch-at91/at91_dbu.h    |    4 +
 arch/arm/include/asm/arch-at91/at91_pmc.h    |   23 +++
 arch/arm/include/asm/arch-at91/clk.h         |    1 +
 arch/arm/include/asm/arch-at91/hardware.h    |    2 +
 arch/arm/include/asm/arch-at91/sama5d3.h     |  212 ++++++++++++++++++++
 arch/arm/include/asm/arch-at91/sama5d3_smc.h |   79 ++++++++
 board/atmel/sama5d3xek/Makefile              |   51 +++++
 board/atmel/sama5d3xek/sama5d3xek.c          |  275 ++++++++++++++++++++++++++
 boards.cfg                                   |    3 +
 doc/README.at91                              |   84 ++++++--
 drivers/usb/host/ohci-at91.c                 |   14 +-
 include/configs/sama5d3xek.h                 |  245 +++++++++++++++++++++++
 19 files changed, 1624 insertions(+), 19 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/at91/Makefile
 create mode 100644 arch/arm/cpu/armv7/at91/clock.c
 create mode 100644 arch/arm/cpu/armv7/at91/cpu.c
 create mode 100644 arch/arm/cpu/armv7/at91/reset.c
 create mode 100644 arch/arm/cpu/armv7/at91/sama5d3_devices.c
 create mode 100644 arch/arm/cpu/armv7/at91/timer.c
 create mode 100644 arch/arm/include/asm/arch-at91/sama5d3.h
 create mode 100644 arch/arm/include/asm/arch-at91/sama5d3_smc.h
 create mode 100644 board/atmel/sama5d3xek/Makefile
 create mode 100644 board/atmel/sama5d3xek/sama5d3xek.c
 create mode 100644 include/configs/sama5d3xek.h

Comments

Albert ARIBAUD May 22, 2013, 9:59 a.m. UTC | #1 
Hi Andreas,

On Tue, 21 May 2013 11:59:26 +0200, Andreas Bießmann
<andreas.devel@googlemail.com> wrote:

> Dear Albert Aribaud,
> 
> please pull the following changes from u-boot-atmel/master into
> u-boot-arm/master.
> 
> The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:
> 
>   at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-atmel.git master
> 
> for you to fetch changes up to 5ba444f092ae9f68a0bd1f53956be2e69d26cf61:
> 
>   ARM: at91: add NAND partition table and index (2013-05-21 11:54:21 +0200)
> 
> ----------------------------------------------------------------
> Bo Shen (6):
>       ARM: at91: add Atmel sama5d3 SoC new pmc register
>       USB: ohci-at91: support sama5d3x devices
>       ARM: atmel: add sama5d3xek support
>       ARM: at91: fix and update README.at91 document
>       ARM: at91: add at91sam9x5 and sama5d3x information
>       ARM: at91: add NAND partition table and index
> 
>  MAINTAINERS                                  |    1 +
>  arch/arm/cpu/armv7/at91/Makefile             |   52 +++++
>  arch/arm/cpu/armv7/at91/clock.c              |  125 ++++++++++++
>  arch/arm/cpu/armv7/at91/cpu.c                |   90 +++++++++
>  arch/arm/cpu/armv7/at91/reset.c              |   47 +++++
>  arch/arm/cpu/armv7/at91/sama5d3_devices.c    |  196 ++++++++++++++++++
>  arch/arm/cpu/armv7/at91/timer.c              |  139 +++++++++++++
>  arch/arm/include/asm/arch-at91/at91_dbu.h    |    4 +
>  arch/arm/include/asm/arch-at91/at91_pmc.h    |   23 +++
>  arch/arm/include/asm/arch-at91/clk.h         |    1 +
>  arch/arm/include/asm/arch-at91/hardware.h    |    2 +
>  arch/arm/include/asm/arch-at91/sama5d3.h     |  212 ++++++++++++++++++++
>  arch/arm/include/asm/arch-at91/sama5d3_smc.h |   79 ++++++++
>  board/atmel/sama5d3xek/Makefile              |   51 +++++
>  board/atmel/sama5d3xek/sama5d3xek.c          |  275 ++++++++++++++++++++++++++
>  boards.cfg                                   |    3 +
>  doc/README.at91                              |   84 ++++++--
>  drivers/usb/host/ohci-at91.c                 |   14 +-
>  include/configs/sama5d3xek.h                 |  245 +++++++++++++++++++++++
>  19 files changed, 1624 insertions(+), 19 deletions(-)
>  create mode 100644 arch/arm/cpu/armv7/at91/Makefile
>  create mode 100644 arch/arm/cpu/armv7/at91/clock.c
>  create mode 100644 arch/arm/cpu/armv7/at91/cpu.c
>  create mode 100644 arch/arm/cpu/armv7/at91/reset.c
>  create mode 100644 arch/arm/cpu/armv7/at91/sama5d3_devices.c
>  create mode 100644 arch/arm/cpu/armv7/at91/timer.c
>  create mode 100644 arch/arm/include/asm/arch-at91/sama5d3.h
>  create mode 100644 arch/arm/include/asm/arch-at91/sama5d3_smc.h
>  create mode 100644 board/atmel/sama5d3xek/Makefile
>  create mode 100644 board/atmel/sama5d3xek/sama5d3xek.c
>  create mode 100644 include/configs/sama5d3xek.h

Applied to u-boot-arm/master, thanks!

Amicalement,