diff --git a/MAINTAINERS b/MAINTAINERS
index 175bbe2..cd3cbaf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -910,6 +910,7 @@ Matt Sealey <matt@genesi-usa.com>
 
 Bo Shen <voice.shen@atmel.com>
 	at91sam9x5ek		ARM926EJS (AT91SAM9G15,G25,G35,X25,X35 SoC)
+	sama5d3xek		ARMV7 (SAMA5D31, D33, D34, D35 SoC)
 
 Michal Simek <monstr@monstr.eu>
 
diff --git a/arch/arm/cpu/armv7/at91/Makefile b/arch/arm/cpu/armv7/at91/Makefile
new file mode 100644
index 0000000..040c67d
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2013
+# Bo Shen <voice.shen@atmel.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(SOC).o
+
+COBJS-$(CONFIG_SAMA5D3)	+= sama5d3_devices.o
+COBJS-y += clock.o
+COBJS-y += cpu.o
+COBJS-y += reset.o
+COBJS-y += timer.o
+
+SRCS    := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS    := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+
+all:	$(obj).depend $(LIB)
+
+$(LIB):	$(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/armv7/at91/clock.c b/arch/arm/cpu/armv7/at91/clock.c
new file mode 100644
index 0000000..552c118
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/clock.c
@@ -0,0 +1,127 @@
+/*
+ * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c]
+ *
+ * Copyright (C) 2005 David Brownell
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/clk.h>
+
+#if !defined(CONFIG_AT91FAMILY)
+# error You need to define CONFIG_AT91FAMILY in your board config!
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static unsigned long at91_css_to_rate(unsigned long css)
+{
+	switch (css) {
+	case AT91_PMC_MCKR_CSS_SLOW:
+		return CONFIG_SYS_AT91_SLOW_CLOCK;
+	case AT91_PMC_MCKR_CSS_MAIN:
+		return gd->arch.main_clk_rate_hz;
+	case AT91_PMC_MCKR_CSS_PLLA:
+		return gd->arch.plla_rate_hz;
+	case AT91_PMC_MCKR_CSS_PLLB:
+		return gd->arch.pllb_rate_hz;
+	}
+
+	return 0;
+}
+
+static u32 at91_pll_rate(u32 freq, u32 reg)
+{
+	unsigned mul, div;
+
+	div = reg & 0xff;
+	mul = (reg >> 18) & 0x7f;
+	if (div && mul) {
+		freq /= div;
+		freq *= mul + 1;
+	} else {
+		freq = 0;
+	}
+
+	return freq;
+}
+
+int at91_clock_init(unsigned long main_clock)
+{
+	unsigned freq, mckr;
+	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
+	unsigned tmp;
+	/*
+	 * When the bootloader initialized the main oscillator correctly,
+	 * there's no problem using the cycle counter.  But if it didn't,
+	 * or when using oscillator bypass mode, we must be told the speed
+	 * of the main clock.
+	 */
+	if (!main_clock) {
+		do {
+			tmp = readl(&pmc->mcfr);
+		} while (!(tmp & AT91_PMC_MCFR_MAINRDY));
+		tmp &= AT91_PMC_MCFR_MAINF_MASK;
+		main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
+	}
+#endif
+	gd->arch.main_clk_rate_hz = main_clock;
+
+	/* report if PLLA is more than mildly overclocked */
+	gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
+
+	/*
+	 * MCK and CPU derive from one of those primary clocks.
+	 * For now, assume this parentage won't change.
+	 */
+	mckr = readl(&pmc->mckr);
+
+	/* plla divisor by 2 */
+	if (mckr & (1 << 12))
+		gd->arch.plla_rate_hz >>= 1;
+
+	gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
+	freq = gd->arch.mck_rate_hz;
+
+	/* prescale */
+	freq >>= mckr & AT91_PMC_MCKR_PRES_MASK;
+
+	switch (mckr & AT91_PMC_MCKR_MDIV_MASK) {
+	case AT91_PMC_MCKR_MDIV_2:
+		gd->arch.mck_rate_hz = freq / 2;
+		break;
+	case AT91_PMC_MCKR_MDIV_3:
+		gd->arch.mck_rate_hz = freq / 3;
+		break;
+	case AT91_PMC_MCKR_MDIV_4:
+		gd->arch.mck_rate_hz = freq / 4;
+		break;
+	default:
+		break;
+	}
+
+	gd->arch.cpu_clk_rate_hz = freq;
+
+	return 0;
+}
+
+void at91_periph_clk_enable(int id)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *) ATMEL_BASE_PMC;
+
+	if (id > 31)
+		writel(1 << (id - 32), &pmc->pcer1);
+	else
+		writel(1 << id, &pmc->pcer);
+}
diff --git a/arch/arm/cpu/armv7/at91/cpu.c b/arch/arm/cpu/armv7/at91/cpu.c
new file mode 100644
index 0000000..ab2b4f1
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/cpu.c
@@ -0,0 +1,90 @@
+/*
+ * (C) Copyright 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
+ * (C) Copyright 2009
+ * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ * (C) Copyright 2013
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_dbu.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_pit.h>
+#include <asm/arch/at91_gpbr.h>
+#include <asm/arch/clk.h>
+
+#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
+#define CONFIG_SYS_AT91_MAIN_CLOCK 0
+#endif
+
+int arch_cpu_init(void)
+{
+	return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
+}
+
+void arch_preboot_os(void)
+{
+	ulong cpiv;
+	at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT;
+
+	cpiv = AT91_PIT_MR_PIV_MASK(readl(&pit->piir));
+
+	/*
+	 * Disable PITC
+	 * Add 0x1000 to current counter to stop it faster
+	 * without waiting for wrapping back to 0
+	 */
+	writel(cpiv + 0x1000, &pit->mr);
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	char buf[32];
+
+	printf("CPU: %s\n", get_cpu_name());
+	printf("Crystal frequency: %8s MHz\n",
+					strmhz(buf, get_main_clk_rate()));
+	printf("CPU clock        : %8s MHz\n",
+					strmhz(buf, get_cpu_clk_rate()));
+	printf("Master clock     : %8s MHz\n",
+					strmhz(buf, get_mck_clk_rate()));
+
+	return 0;
+}
+#endif
+
+void enable_caches(void)
+{
+}
+
+unsigned int get_chip_id(void)
+{
+	return readl(ATMEL_BASE_DBGU + AT91_DBU_CIDR) & ~AT91_DBU_CIDR_MASK;
+}
+
+unsigned int get_extension_chip_id(void)
+{
+	return readl(ATMEL_BASE_DBGU + AT91_DBU_EXID);
+}
diff --git a/arch/arm/cpu/armv7/at91/reset.c b/arch/arm/cpu/armv7/at91/reset.c
new file mode 100644
index 0000000..788f0f1
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/reset.c
@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2013
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_rstc.h>
+
+/* Reset the cpu by telling the reset controller to do so */
+void reset_cpu(ulong ignored)
+{
+	at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC;
+
+	writel(AT91_RSTC_KEY
+		| AT91_RSTC_CR_PROCRST	/* Processor Reset */
+		| AT91_RSTC_CR_PERRST	/* Peripheral Reset */
+#ifdef CONFIG_AT91RESET_EXTRST
+		| AT91_RSTC_CR_EXTRST	/* External Reset (assert nRST pin) */
+#endif
+		, &rstc->cr);
+	/* never reached */
+	do { } while (1);
+}
diff --git a/arch/arm/cpu/armv7/at91/sama5d3_devices.c b/arch/arm/cpu/armv7/at91/sama5d3_devices.c
new file mode 100644
index 0000000..acf8b43
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/sama5d3_devices.c
@@ -0,0 +1,196 @@
+/*
+ * Copyright (C) 2012-2013 Atmel Corporation
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/sama5d3.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/io.h>
+
+unsigned int has_emac()
+{
+	return cpu_is_sama5d31() || cpu_is_sama5d35();
+}
+
+unsigned int has_gmac()
+{
+	return !cpu_is_sama5d31();
+}
+
+unsigned int has_lcdc()
+{
+	return !cpu_is_sama5d35();
+}
+
+char *get_cpu_name()
+{
+	unsigned int extension_id = get_extension_chip_id();
+
+	if (cpu_is_sama5d3())
+		switch (extension_id) {
+		case ARCH_EXID_SAMA5D31:
+			return "SAMA5D31";
+		case ARCH_EXID_SAMA5D33:
+			return "SAMA5D33";
+		case ARCH_EXID_SAMA5D34:
+			return "SAMA5D34";
+		case ARCH_EXID_SAMA5D35:
+			return "SAMA5D35";
+		default:
+			return "Unknown CPU type";
+		}
+	else
+		return "Unknown CPU type";
+}
+
+void at91_serial0_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTD, 18, 1);	/* TXD0 */
+	at91_set_a_periph(AT91_PIO_PORTD, 17, 0);	/* RXD0 */
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_USART0);
+}
+
+void at91_serial1_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTB, 29, 1);	/* TXD1 */
+	at91_set_a_periph(AT91_PIO_PORTB, 28, 0);	/* RXD1 */
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_USART1);
+}
+
+void at91_serial2_hw_init(void)
+{
+	at91_set_b_periph(AT91_PIO_PORTE, 26, 1);	/* TXD2 */
+	at91_set_b_periph(AT91_PIO_PORTE, 25, 0);	/* RXD2 */
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_USART2);
+}
+
+void at91_seriald_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTB, 31, 1);	/* DTXD */
+	at91_set_a_periph(AT91_PIO_PORTB, 30, 0);	/* DRXD */
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_SYS);
+}
+
+#if defined(CONFIG_ATMEL_SPI)
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+	at91_set_a_periph(AT91_PIO_PORTD, 10, 0);       /* SPI0_MISO */
+	at91_set_a_periph(AT91_PIO_PORTD, 11, 0);       /* SPI0_MOSI */
+	at91_set_a_periph(AT91_PIO_PORTD, 12, 0);       /* SPI0_SPCK */
+
+	if (cs_mask & (1 << 0))
+		at91_set_pio_output(AT91_PIO_PORTD, 13, 1);
+	if (cs_mask & (1 << 1))
+		at91_set_pio_output(AT91_PIO_PORTD, 14, 1);
+	if (cs_mask & (1 << 2))
+		at91_set_pio_output(AT91_PIO_PORTD, 15, 1);
+	if (cs_mask & (1 << 3))
+		at91_set_pio_output(AT91_PIO_PORTD, 16, 1);
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_SPI0);
+}
+#endif
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+void at91_mci_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTD, 0, 0);	/* MCI0 CMD */
+	at91_set_a_periph(AT91_PIO_PORTD, 1, 0);	/* MCI0 DA0 */
+	at91_set_a_periph(AT91_PIO_PORTD, 2, 0);	/* MCI0 DA1 */
+	at91_set_a_periph(AT91_PIO_PORTD, 3, 0);        /* MCI0 DA2 */
+	at91_set_a_periph(AT91_PIO_PORTD, 4, 0);        /* MCI0 DA3 */
+#ifdef CONFIG_ATMEL_MCI_8BIT
+	at91_set_a_periph(AT91_PIO_PORTD, 5, 0);        /* MCI0 DA4 */
+	at91_set_a_periph(AT91_PIO_PORTD, 6, 0);        /* MCI0 DA5 */
+	at91_set_a_periph(AT91_PIO_PORTD, 7, 0);        /* MCI0 DA6 */
+	at91_set_a_periph(AT91_PIO_PORTD, 8, 0);        /* MCI0 DA7 */
+#endif
+	at91_set_a_periph(AT91_PIO_PORTD, 9, 0);        /* MCI0 CLK */
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_MCI0);
+}
+#endif
+
+#ifdef CONFIG_MACB
+void at91_macb_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTC, 7, 0);	/* ETXCK_EREFCK */
+	at91_set_a_periph(AT91_PIO_PORTC, 5, 0);	/* ERXDV */
+	at91_set_a_periph(AT91_PIO_PORTC, 2, 0);	/* ERX0 */
+	at91_set_a_periph(AT91_PIO_PORTC, 3, 0);	/* ERX1 */
+	at91_set_a_periph(AT91_PIO_PORTC, 6, 0);	/* ERXER */
+	at91_set_a_periph(AT91_PIO_PORTC, 4, 0);	/* ETXEN */
+	at91_set_a_periph(AT91_PIO_PORTC, 0, 0);	/* ETX0 */
+	at91_set_a_periph(AT91_PIO_PORTC, 1, 0);	/* ETX1 */
+	at91_set_a_periph(AT91_PIO_PORTC, 9, 0);	/* EMDIO */
+	at91_set_a_periph(AT91_PIO_PORTC, 8, 0);	/* EMDC */
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_EMAC);
+}
+#endif
+
+#ifdef CONFIG_LCD
+void at91_lcd_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTA, 24, 0);	/* LCDPWM */
+	at91_set_a_periph(AT91_PIO_PORTA, 25, 0);	/* LCDDISP */
+	at91_set_a_periph(AT91_PIO_PORTA, 26, 0);	/* LCDVSYNC */
+	at91_set_a_periph(AT91_PIO_PORTA, 27, 0);	/* LCDHSYNC */
+	at91_set_a_periph(AT91_PIO_PORTA, 28, 0);	/* LCDDOTCK */
+	at91_set_a_periph(AT91_PIO_PORTA, 29, 0);	/* LCDDEN */
+
+	/* The lower 16-bit of LCD only available on Port A */
+	at91_set_a_periph(AT91_PIO_PORTA,  0, 0);	/* LCDD0 */
+	at91_set_a_periph(AT91_PIO_PORTA,  1, 0);	/* LCDD1 */
+	at91_set_a_periph(AT91_PIO_PORTA,  2, 0);	/* LCDD2 */
+	at91_set_a_periph(AT91_PIO_PORTA,  3, 0);	/* LCDD3 */
+	at91_set_a_periph(AT91_PIO_PORTA,  4, 0);	/* LCDD4 */
+	at91_set_a_periph(AT91_PIO_PORTA,  5, 0);	/* LCDD5 */
+	at91_set_a_periph(AT91_PIO_PORTA,  6, 0);	/* LCDD6 */
+	at91_set_a_periph(AT91_PIO_PORTA,  7, 0);	/* LCDD7 */
+	at91_set_a_periph(AT91_PIO_PORTA,  8, 0);	/* LCDD8 */
+	at91_set_a_periph(AT91_PIO_PORTA,  9, 0);	/* LCDD9 */
+	at91_set_a_periph(AT91_PIO_PORTA, 10, 0);	/* LCDD10 */
+	at91_set_a_periph(AT91_PIO_PORTA, 11, 0);	/* LCDD11 */
+	at91_set_a_periph(AT91_PIO_PORTA, 12, 0);	/* LCDD12 */
+	at91_set_a_periph(AT91_PIO_PORTA, 13, 0);	/* LCDD13 */
+	at91_set_a_periph(AT91_PIO_PORTA, 14, 0);	/* LCDD14 */
+	at91_set_a_periph(AT91_PIO_PORTA, 15, 0);	/* LCDD15 */
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_LCDC);
+}
+#endif
diff --git a/arch/arm/cpu/armv7/at91/timer.c b/arch/arm/cpu/armv7/at91/timer.c
new file mode 100644
index 0000000..b3a450f
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/timer.c
@@ -0,0 +1,139 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2013
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pit.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/clk.h>
+#include <div64.h>
+
+#if !defined(CONFIG_AT91FAMILY)
+# error You need to define CONFIG_AT91FAMILY in your board config!
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * We're using the SAMA5D3x PITC in 32 bit mode, by
+ * setting the 20 bit counter period to its maximum (0xfffff).
+ * (See the relevant data sheets to understand that this really works)
+ *
+ * We do also mimic the typical powerpc way of incrementing
+ * two 32 bit registers called tbl and tbu.
+ *
+ * Those registers increment at 1/16 the main clock rate.
+ */
+
+#define TIMER_LOAD_VAL	0xfffff
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+	tick *= CONFIG_SYS_HZ;
+	do_div(tick, gd->arch.timer_rate_hz);
+
+	return tick;
+}
+
+static inline unsigned long long usec_to_tick(unsigned long long usec)
+{
+	usec *= gd->arch.timer_rate_hz;
+	do_div(usec, 1000000);
+
+	return usec;
+}
+
+/*
+ * Use the PITC in full 32 bit incrementing mode
+ */
+int timer_init(void)
+{
+	at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT;
+
+	/* Enable PITC Clock */
+	at91_periph_clk_enable(ATMEL_ID_SYS);
+
+	/* Enable PITC */
+	writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr);
+
+	gd->arch.timer_rate_hz = gd->arch.mck_rate_hz / 16;
+	gd->arch.tbu = 0;
+	gd->arch.tbl = 0;
+
+	return 0;
+}
+
+/*
+ * Get the current 64 bit timer tick count
+ */
+unsigned long long get_ticks(void)
+{
+	at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT;
+
+	ulong now = readl(&pit->piir);
+
+	/* increment tbu if tbl has rolled over */
+	if (now < gd->arch.tbl)
+		gd->arch.tbu++;
+	gd->arch.tbl = now;
+	return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
+}
+
+void __udelay(unsigned long usec)
+{
+	unsigned long long start;
+	ulong tmo;
+
+	start = get_ticks();		/* get current timestamp */
+	tmo = usec_to_tick(usec);	/* convert usecs to ticks */
+	while ((get_ticks() - start) < tmo)
+		;			/* loop till time has passed */
+}
+
+/*
+ * get_timer(base) can be used to check for timeouts or
+ * to measure elasped time relative to an event:
+ *
+ * ulong start_time = get_timer(0) sets start_time to the current
+ * time value.
+ * get_timer(start_time) returns the time elapsed since then.
+ *
+ * The time is used in CONFIG_SYS_HZ units!
+ */
+ulong get_timer(ulong base)
+{
+	return tick_to_time(get_ticks()) - base;
+}
+
+/*
+ * Return the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return gd->arch.timer_rate_hz;
+}
diff --git a/arch/arm/include/asm/arch-at91/at91_common.h b/arch/arm/include/asm/arch-at91/at91_common.h
index 8282f46..2c03eff 100644
--- a/arch/arm/include/asm/arch-at91/at91_common.h
+++ b/arch/arm/include/asm/arch-at91/at91_common.h
@@ -26,6 +26,7 @@
 #define AT91_COMMON_H
 
 void at91_can_hw_init(void);
+void at91_lcd_hw_init(void);
 void at91_macb_hw_init(void);
 void at91_mci_hw_init(void);
 void at91_serial0_hw_init(void);
diff --git a/arch/arm/include/asm/arch-at91/at91_dbu.h b/arch/arm/include/asm/arch-at91/at91_dbu.h
index 3429293..9a640a5 100644
--- a/arch/arm/include/asm/arch-at91/at91_dbu.h
+++ b/arch/arm/include/asm/arch-at91/at91_dbu.h
@@ -38,4 +38,8 @@ typedef struct at91_dbu {
 #define AT91_DBU_CID_ARCH_9xx		0x01900000
 #define AT91_DBU_CID_ARCH_9XExx	0x02900000
 
+#define AT91_DBU_CIDR_MASK		0x1f
+#define AT91_DBU_CIDR			0x40
+#define AT91_DBU_EXID			0x44
+
 #endif
diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/include/asm/arch-at91/at91_pmc.h
index 086cb9b..1b5a763 100644
--- a/arch/arm/include/asm/arch-at91/at91_pmc.h
+++ b/arch/arm/include/asm/arch-at91/at91_pmc.h
@@ -55,7 +55,16 @@ typedef struct at91_pmc {
 	u32	reserved5[21];
 	u32	wpmr;		/* 0xE4 Write Protect Mode Register (CAP0) */
 	u32	wpsr;		/* 0xE8 Write Protect Status Register (CAP0) */
+#ifdef CONFIG_SAMA5D3
+	u32	reserved6[8];
+	u32	pcer1;		/* 0x100 Periperial Clock Enable Register 1 */
+	u32	pcdr1;		/* 0x104 Periperial Clock Disable Register 1 */
+	u32	pcsr1;		/* 0x108 Periperial Clock Status Register 1 */
+	u32	pcr;		/* 0x10c Periperial Control Register 1 */
+	u32	ocr;		/* 0x110 Oscillator Calibration Register 1 */
+#else
 	u32	reserved8[5];
+#endif
 } at91_pmc_t;
 
 #endif	/* end not assembly */
@@ -82,6 +91,16 @@ typedef struct at91_pmc {
 #define AT91_PMC_MCKR_CSS_PLLB		0x00000003
 #define AT91_PMC_MCKR_CSS_MASK		0x00000003
 
+#ifdef CONFIG_SAMA5D3
+#define AT91_PMC_MCKR_PRES_1		0x00000000
+#define AT91_PMC_MCKR_PRES_2		0x00000010
+#define AT91_PMC_MCKR_PRES_4		0x00000020
+#define AT91_PMC_MCKR_PRES_8		0x00000030
+#define AT91_PMC_MCKR_PRES_16		0x00000040
+#define AT91_PMC_MCKR_PRES_32		0x00000050
+#define AT91_PMC_MCKR_PRES_64		0x00000060
+#define AT91_PMC_MCKR_PRES_MASK		0x00000070
+#else
 #define AT91_PMC_MCKR_PRES_1		0x00000000
 #define AT91_PMC_MCKR_PRES_2		0x00000004
 #define AT91_PMC_MCKR_PRES_4		0x00000008
@@ -90,6 +109,7 @@ typedef struct at91_pmc {
 #define AT91_PMC_MCKR_PRES_32		0x00000014
 #define AT91_PMC_MCKR_PRES_64		0x00000018
 #define AT91_PMC_MCKR_PRES_MASK		0x0000001C
+#endif
 
 #ifdef CONFIG_AT91RM9200
 #define AT91_PMC_MCKR_MDIV_1		0x00000000
@@ -100,6 +120,9 @@ typedef struct at91_pmc {
 #else
 #define AT91_PMC_MCKR_MDIV_1		0x00000000
 #define AT91_PMC_MCKR_MDIV_2		0x00000100
+#ifdef CONFIG_SAMA5D3
+#define AT91_PMC_MCKR_MDIV_3		0x00000300
+#endif
 #define AT91_PMC_MCKR_MDIV_4		0x00000200
 #define AT91_PMC_MCKR_MDIV_MASK		0x00000300
 #endif
diff --git a/arch/arm/include/asm/arch-at91/clk.h b/arch/arm/include/asm/arch-at91/clk.h
index d4852a3..04b0f83 100644
--- a/arch/arm/include/asm/arch-at91/clk.h
+++ b/arch/arm/include/asm/arch-at91/clk.h
@@ -95,4 +95,5 @@ static inline unsigned long get_mci_clk_rate(void)
 }
 
 int at91_clock_init(unsigned long main_clock);
+void at91_periph_clk_enable(int id);
 #endif /* __ASM_ARM_ARCH_CLK_H__ */
diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h
index 4c4ee70..87dd20b 100644
--- a/arch/arm/include/asm/arch-at91/hardware.h
+++ b/arch/arm/include/asm/arch-at91/hardware.h
@@ -43,6 +43,8 @@
 # include <asm/arch/at91cap9.h>
 #elif defined(CONFIG_AT91X40)
 # include <asm/arch/at91x40.h>
+#elif defined(CONFIG_SAMA5D3)
+# include <asm/arch/sama5d3.h>
 #else
 # error "Unsupported AT91 processor"
 #endif
diff --git a/arch/arm/include/asm/arch-at91/sama5d3.h b/arch/arm/include/asm/arch-at91/sama5d3.h
new file mode 100644
index 0000000..fe877e3
--- /dev/null
+++ b/arch/arm/include/asm/arch-at91/sama5d3.h
@@ -0,0 +1,212 @@
+/*
+ * Chip-specific header file for the SAMA5D3 family
+ *
+ * (C) 2012 - 2013 Atmel Corporation.
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * Definitions for the SoC:
+ * SAMA5D3
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef SAMA5D3_H
+#define SAMA5D3_H
+
+/*
+ * defines to be used in other places
+ */
+#define CONFIG_ARMV7		/* ARM A5 Core */
+#define CONFIG_AT91FAMILY	/* it's a member of AT91 */
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define ATMEL_ID_FIQ	0	/* Advanced Interrupt Controller (FIQ) */
+#define ATMEL_ID_SYS	1	/* System Controller Interrupt */
+#define ATMEL_ID_DBGU	2	/* Debug Unit Interrupt */
+#define ATMEL_ID_PIT	3	/* Periodic Interval Timer Interrupt */
+#define ATMEL_ID_WDT	4	/* Watchdog timer Interrupt */
+#define ATMEL_ID_SMC	5	/* Multi-bit ECC Interrupt */
+#define ATMEL_ID_PIOA	6	/* Parallel I/O Controller A */
+#define ATMEL_ID_PIOB	7	/* Parallel I/O Controller B */
+#define ATMEL_ID_PIOC	8	/* Parallel I/O Controller C */
+#define ATMEL_ID_PIOD	9	/* Parallel I/O Controller D */
+#define ATMEL_ID_PIOE	10	/* Parallel I/O Controller E */
+#define ATMEL_ID_SMD	11	/* SMD Soft Modem */
+#define ATMEL_ID_USART0	12	/* USART 0 */
+#define ATMEL_ID_USART1	13	/* USART 1 */
+#define ATMEL_ID_USART2	14	/* USART 2 */
+#define ATMEL_ID_USART3	15	/* USART 3 */
+#define ATMEL_ID_UART0	16
+#define ATMEL_ID_UART1	17
+#define ATMEL_ID_TWI0	18	/* Two-Wire Interface 0 */
+#define ATMEL_ID_TWI1	19	/* Two-Wire Interface 1 */
+#define ATMEL_ID_TWI2	20	/* Two-Wire Interface 2 */
+#define ATMEL_ID_MCI0	21	/* High Speed Multimedia Card Interface 0 */
+#define ATMEL_ID_MCI1	22	/*  */
+#define ATMEL_ID_MCI2	23	/*  */
+#define ATMEL_ID_SPI0	24	/* Serial Peripheral Interface 0 */
+#define ATMEL_ID_SPI1	25	/* Serial Peripheral Interface 1 */
+#define ATMEL_ID_TC0	26	/* */
+#define ATMEL_ID_TC1	27	/* */
+#define ATMEL_ID_PWMC	28	/* Pulse Width Modulation Controller */
+#define ATMEL_ID_TSC	29	/* Touch Screen ADC Controller */
+#define ATMEL_ID_DMA0	30	/* DMA Controller */
+#define ATMEL_ID_DMA1	31	/* DMA Controller */
+#define ATMEL_ID_UHPHS	32	/* USB Host High Speed */
+#define ATMEL_ID_UDPHS	33	/* USB Device High Speed */
+#define ATMEL_ID_GMAC	34
+#define ATMEL_ID_EMAC	35	/* Ethernet MAC */
+#define ATMEL_ID_LCDC	36	/* LCD Controller */
+#define ATMEL_ID_ISI	37	/* Image Sensor Interface */
+#define ATMEL_ID_SSC0	38	/* Synchronous Serial Controller 0 */
+#define ATMEL_ID_SSC1	39	/* Synchronous Serial Controller 1 */
+#define ATMEL_ID_CAN0	40
+#define ATMEL_ID_CAN1	41
+#define ATMEL_ID_SHA	42
+#define ATMEL_ID_AES	43
+#define ATMEL_ID_TDES	44
+#define ATMEL_ID_TRNG	45
+#define ATMEL_ID_ARM	46
+#define ATMEL_ID_IRQ0	47	/* Advanced Interrupt Controller */
+#define ATMEL_ID_FUSE	48
+#define ATMEL_ID_MPDDRC	49
+
+/* sama5d3 series chip id definitions */
+#define ARCH_ID_SAMA5D3	0x8a5c07c0
+#define ARCH_EXID_SAMA5D31	0x00444300
+#define ARCH_EXID_SAMA5D33	0x00414300
+#define ARCH_EXID_SAMA5D34	0x00414301
+#define ARCH_EXID_SAMA5D35	0x00584300
+
+#define cpu_is_sama5d3()	(get_chip_id() == ARCH_ID_SAMA5D3)
+#define cpu_is_sama5d31()	(cpu_is_sama5d3() && \
+		(get_extension_chip_id() == ARCH_EXID_SAMA5D31))
+#define cpu_is_sama5d33()	(cpu_is_sama5d3() && \
+		(get_extension_chip_id() == ARCH_EXID_SAMA5D33))
+#define cpu_is_sama5d34()	(cpu_is_sama5d3() && \
+		(get_extension_chip_id() == ARCH_EXID_SAMA5D34))
+#define cpu_is_sama5d35()	(cpu_is_sama5d3() && \
+		(get_extension_chip_id() == ARCH_EXID_SAMA5D35))
+
+/*
+ * User Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_MCI0		0xf0000000
+#define ATMEL_BASE_SPI0		0xf0004000
+#define ATMEL_BASE_SSC0		0xf000C000
+#define ATMEL_BASE_TC2		0xf0010000
+#define ATMEL_BASE_TWI0		0xf0014000
+#define ATMEL_BASE_TWI1		0xf0018000
+#define ATMEL_BASE_USART0	0xf001c000
+#define ATMEL_BASE_USART1	0xf0020000
+#define ATMEL_BASE_UART0	0xf0024000
+#define ATMEL_BASE_GMAC		0xf0028000
+#define ATMEL_BASE_PWMC		0xf002c000
+#define ATMEL_BASE_LCDC		0xf0030000
+#define ATMEL_BASE_ISI		0xf0034000
+#define ATMEL_BASE_SFR		0xf0038000
+/* Reserved: 0xf003c000 - 0xf8000000 */
+#define ATMEL_BASE_MCI1		0xf8000000
+#define ATMEL_BASE_MCI2		0xf8004000
+#define ATMEL_BASE_SPI1		0xf8008000
+#define ATMEL_BASE_SSC1		0xf800c000
+#define ATMEL_BASE_CAN1		0xf8010000
+#define ATMEL_BASE_TC3		0xf8014000
+#define ATMEL_BASE_TSADC	0xf8018000
+#define ATMEL_BASE_TWI2		0xf801c000
+#define ATMEL_BASE_USART2	0xf8020000
+#define ATMEL_BASE_USART3	0xf8024000
+#define ATMEL_BASE_UART1	0xf8028000
+#define ATMEL_BASE_EMAC		0xf802c000
+#define ATMEL_BASE_UDHPS	0xf8030000
+#define ATMEL_BASE_SHA		0xf8034000
+#define ATMEL_BASE_AES		0xf8038000
+#define ATMEL_BASE_TDES		0xf803c000
+#define ATMEL_BASE_TRNG		0xf8040000
+/* Reserved:	0xf804400 - 0xffffc00 */
+
+/*
+ * System Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_SYS		0xffffc000
+#define ATMEL_BASE_SMC		0xffffc000
+#define ATMEL_BASE_PMECC	(ATMEL_BASE_SMC + 0x070)
+#define ATMEL_BASE_PMERRLOC	(ATMEL_BASE_SMC + 0x500)
+#define ATMEL_BASE_FUSE		0xffffe400
+#define ATMEL_BASE_DMAC0	0xffffe600
+#define ATMEL_BASE_DMAC1	0xffffe800
+#define ATMEL_BASE_MPDDRC	0xffffea00
+#define ATMEL_BASE_MATRIX	0xffffec00
+#define ATMEL_BASE_DBGU		0xffffee00
+#define ATMEL_BASE_AIC		0xfffff000
+#define ATMEL_BASE_PIOA		0xfffff200
+#define ATMEL_BASE_PIOB		0xfffff400
+#define ATMEL_BASE_PIOC		0xfffff600
+#define ATMEL_BASE_PIOD		0xfffff800
+#define ATMEL_BASE_PIOE		0xfffffa00
+#define ATMEL_BASE_PMC		0xfffffc00
+#define ATMEL_BASE_RSTC		0xfffffe00
+#define ATMEL_BASE_SHDWN	0xfffffe10
+#define ATMEL_BASE_PIT		0xfffffe30
+#define ATMEL_BASE_WDT		0xfffffe40
+#define ATMEL_BASE_SCKCR	0xfffffe50
+#define ATMEL_BASE_GPBR		0xfffffe60
+#define ATMEL_BASE_RTC		0xfffffeb0
+/* Reserved:	0xfffffee0 - 0xffffffff */
+
+/*
+ * Internal Memory.
+ */
+#define ATMEL_BASE_ROM		0x00100000	/* Internal ROM base address */
+#define ATMEL_BASE_SRAM		0x00200000	/* Internal ROM base address */
+#define ATMEL_BASE_SRAM0	0x00300000	/* Internal SRAM base address */
+#define ATMEL_BASE_SRAM1	0x00310000	/* Internal SRAM base address */
+#define ATMEL_BASE_SMD		0x00400000	/* Internal ROM base address */
+#define ATMEL_BASE_UDPHS_FIFO	0x00500000	/* USB Device HS controller */
+#define ATMEL_BASE_OHCI		0x00600000	/* USB Host controller (OHCI) */
+#define ATMEL_BASE_EHCI		0x00700000	/* USB Host controller (EHCI) */
+#define ATMEL_BASE_AXI		0x00800000	/* Video Decoder Controller */
+#define ATMEL_BASE_DAP		0x00900000	/* Video Decoder Controller */
+
+/*
+ * External memory
+ */
+#define ATMEL_BASE_CS0		0x10000000
+#define ATMEL_BASE_DDRCS	0x20000000
+#define ATMEL_BASE_CS1		0x40000000
+#define ATMEL_BASE_CS2		0x50000000
+#define ATMEL_BASE_CS3		0x60000000
+
+/*
+ * Other misc defines
+ */
+#define ATMEL_PIO_PORTS		5
+#define CPU_HAS_PIO3
+#define PIO_SCDR_DIV		0x3fff
+
+/*
+ * PMECC table in ROM
+ */
+#define ATMEL_PMECC_INDEX_OFFSET_512	0x10000
+#define ATMEL_PMECC_INDEX_OFFSET_1024	0x18000
+#define ATMEL_PMECC_ALPHA_OFFSET_512	0x10000
+#define ATMEL_PMECC_ALPHA_OFFSET_1024	0x18000
+
+/*
+ * SAMA5D3 specific prototypes
+ */
+#ifndef __ASSEMBLY__
+unsigned int get_chip_id(void);
+unsigned int get_extension_chip_id(void);
+unsigned int has_emac(void);
+unsigned int has_gmac(void);
+unsigned int has_lcdc(void);
+char *get_cpu_name(void);
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/arch-at91/sama5d3_smc.h b/arch/arm/include/asm/arch-at91/sama5d3_smc.h
new file mode 100644
index 0000000..eb53eba
--- /dev/null
+++ b/arch/arm/include/asm/arch-at91/sama5d3_smc.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2012 Atmel Corporation.
+ *
+ * Static Memory Controllers (SMC) - System peripherals registers.
+ * Based on SAMA5D3 datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef SAMA5D3_SMC_H
+#define SAMA5D3_SMC_H
+
+#ifdef __ASSEMBLY__
+#define AT91_ASM_SMC_SETUP0	(ATMEL_BASE_SMC + 0x600)
+#define AT91_ASM_SMC_PULSE0	(ATMEL_BASE_SMC + 0x604)
+#define AT91_ASM_SMC_CYCLE0	(ATMEL_BASE_SMC + 0x608)
+#define AT91_ASM_SMC_MODE0	(ATMEL_BASE_SMC + 0x60C)
+#else
+struct at91_cs {
+	u32	reserved[96];
+	u32	setup;		/* 0x600 SMC Setup Register */
+	u32	pulse;		/* 0x604 SMC Pulse Register */
+	u32	cycle;		/* 0x608 SMC Cycle Register */
+	u32	timings;	/* 0x60C SMC Cycle Register */
+	u32	mode;		/* 0x610 SMC Mode Register */
+};
+
+struct at91_smc {
+	struct at91_cs cs[4];
+};
+#endif /*  __ASSEMBLY__ */
+
+#define AT91_SMC_SETUP_NWE(x)		(x & 0x3f)
+#define AT91_SMC_SETUP_NCS_WR(x)	((x & 0x3f) << 8)
+#define AT91_SMC_SETUP_NRD(x)		((x & 0x3f) << 16)
+#define AT91_SMC_SETUP_NCS_RD(x)	((x & 0x3f) << 24)
+
+#define AT91_SMC_PULSE_NWE(x)		(x & 0x3f)
+#define AT91_SMC_PULSE_NCS_WR(x)	((x & 0x3f) << 8)
+#define AT91_SMC_PULSE_NRD(x)		((x & 0x3f) << 16)
+#define AT91_SMC_PULSE_NCS_RD(x)	((x & 0x3f) << 24)
+
+#define AT91_SMC_CYCLE_NWE(x)		(x & 0x1ff)
+#define AT91_SMC_CYCLE_NRD(x)		((x & 0x1ff) << 16)
+
+#define AT91_SMC_TIMINGS_TCLR(x)	(x & 0xf)
+#define AT91_SMC_TIMINGS_TADL(x)	((x & 0xf) << 4)
+#define AT91_SMC_TIMINGS_TAR(x)		((x & 0xf) << 8)
+#define AT91_SMC_TIMINGS_OCMS(x)	((x & 0x1) << 12)
+#define AT91_SMC_TIMINGS_TRR(x)		((x & 0xf) << 16)
+#define AT91_SMC_TIMINGS_TWB(x)		((x & 0xf) << 24)
+#define AT91_SMC_TIMINGS_RBNSEL(x)	((x & 0xf) << 28)
+#define AT91_SMC_TIMINGS_NFSEL(x)	((x & 0x1) << 31)
+
+#define AT91_SMC_MODE_RM_NCS		0x00000000
+#define AT91_SMC_MODE_RM_NRD		0x00000001
+#define AT91_SMC_MODE_WM_NCS		0x00000000
+#define AT91_SMC_MODE_WM_NWE		0x00000002
+
+#define AT91_SMC_MODE_EXNW_DISABLE	0x00000000
+#define AT91_SMC_MODE_EXNW_FROZEN	0x00000020
+#define AT91_SMC_MODE_EXNW_READY	0x00000030
+
+#define AT91_SMC_MODE_BAT		0x00000100
+#define AT91_SMC_MODE_DBW_8		0x00000000
+#define AT91_SMC_MODE_DBW_16		0x00001000
+#define AT91_SMC_MODE_DBW_32		0x00002000
+#define AT91_SMC_MODE_TDF_CYCLE(x)	((x & 0xf) << 16)
+#define AT91_SMC_MODE_TDF		0x00100000
+#define AT91_SMC_MODE_PMEN		0x01000000
+#define AT91_SMC_MODE_PS_4		0x00000000
+#define AT91_SMC_MODE_PS_8		0x10000000
+#define AT91_SMC_MODE_PS_16		0x20000000
+#define AT91_SMC_MODE_PS_32		0x30000000
+
+#endif
diff --git a/board/atmel/sama5d3xek/Makefile b/board/atmel/sama5d3xek/Makefile
new file mode 100644
index 0000000..45d24d2
--- /dev/null
+++ b/board/atmel/sama5d3xek/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian@popies.net>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# (C) Copyright 2013
+# Bo Shen <voice.shen@atmel.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y += sama5d3xek.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c
new file mode 100644
index 0000000..41659e9
--- /dev/null
+++ b/board/atmel/sama5d3xek/sama5d3xek.c
@@ -0,0 +1,277 @@
+/*
+ * Copyright (C) 2012 - 2013 Atmel Corporation
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <asm/io.h>
+#include <asm/arch/sama5d3_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/clk.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#include <atmel_mci.h>
+#include <net.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+#ifdef CONFIG_NAND_ATMEL
+void sama5d3xek_nand_hw_init(void)
+{
+	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+
+	at91_periph_clk_enable(ATMEL_ID_SMC);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(1) |
+	       AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(1),
+	       &smc->cs[3].setup);
+	writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(5) |
+	       AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(5),
+	       &smc->cs[3].pulse);
+	writel(AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(8),
+	       &smc->cs[3].cycle);
+	writel(AT91_SMC_TIMINGS_TCLR(3) | AT91_SMC_TIMINGS_TADL(10) |
+	       AT91_SMC_TIMINGS_TAR(3)  | AT91_SMC_TIMINGS_TRR(4)   |
+	       AT91_SMC_TIMINGS_TWB(5)  | AT91_SMC_TIMINGS_RBNSEL(3)|
+	       AT91_SMC_TIMINGS_NFSEL(1), &smc->cs[3].timings);
+	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+	       AT91_SMC_MODE_EXNW_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+	       AT91_SMC_MODE_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+	       AT91_SMC_MODE_DBW_8 |
+#endif
+	       AT91_SMC_MODE_TDF_CYCLE(3),
+	       &smc->cs[3].mode);
+}
+#endif
+
+#ifdef CONFIG_CMD_USB
+static void sama5d3xek_usb_hw_init(void)
+{
+	at91_set_pio_output(AT91_PIO_PORTD, 25, 0);
+	at91_set_pio_output(AT91_PIO_PORTD, 26, 0);
+	at91_set_pio_output(AT91_PIO_PORTD, 27, 0);
+}
+#endif
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+static void sama5d3xek_mci_hw_init(void)
+{
+	at91_mci_hw_init();
+
+	at91_set_pio_output(AT91_PIO_PORTB, 10, 0);	/* MCI0 Power */
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+	.vl_col = 800,
+	.vl_row = 480,
+	.vl_clk = 24000000,
+	.vl_sync = ATMEL_LCDC_INVLINE_NORMAL | ATMEL_LCDC_INVFRAME_NORMAL,
+	.vl_bpix = LCD_BPP,
+	.vl_tft = 1,
+	.vl_hsync_len = 128,
+	.vl_left_margin = 64,
+	.vl_right_margin = 64,
+	.vl_vsync_len = 2,
+	.vl_upper_margin = 22,
+	.vl_lower_margin = 21,
+	.mmio = ATMEL_BASE_LCDC,
+};
+
+void lcd_enable(void)
+{
+}
+
+void lcd_disable(void)
+{
+}
+
+static void sama5d3xek_lcd_hw_init(void)
+{
+	gd->fb_base = CONFIG_SAMA5D3_LCD_BASE;
+
+	/* The higher 8 bit of LCD is board related */
+	at91_set_c_periph(AT91_PIO_PORTC, 14, 0);	/* LCDD16 */
+	at91_set_c_periph(AT91_PIO_PORTC, 13, 0);	/* LCDD17 */
+	at91_set_c_periph(AT91_PIO_PORTC, 12, 0);	/* LCDD18 */
+	at91_set_c_periph(AT91_PIO_PORTC, 11, 0);	/* LCDD19 */
+	at91_set_c_periph(AT91_PIO_PORTC, 10, 0);	/* LCDD20 */
+	at91_set_c_periph(AT91_PIO_PORTC, 15, 0);	/* LCDD21 */
+	at91_set_c_periph(AT91_PIO_PORTE, 27, 0);	/* LCDD22 */
+	at91_set_c_periph(AT91_PIO_PORTE, 28, 0);	/* LCDD23 */
+
+	/* Configure lower 16 bit of LCD and enable clock */
+	at91_lcd_hw_init();
+}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	lcd_printf("%s\n", U_BOOT_VERSION);
+	lcd_printf("(C) 2013 ATMEL Corp\n");
+	lcd_printf("at91@atmel.com\n");
+	lcd_printf("%s CPU at %s MHz\n",
+		get_cpu_name(),
+		strmhz(temp, get_cpu_clk_rate()));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+
+	nand_size = 0;
+#ifdef CONFIG_NAND_ATMEL
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+#endif
+	lcd_printf("  %ld MB SDRAM, %ld MB NAND\n",
+		dram_size >> 20,
+		nand_size >> 20);
+}
+#endif /* CONFIG_LCD_INFO */
+#endif /* CONFIG_LCD */
+
+int board_early_init_f(void)
+{
+	at91_seriald_hw_init();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_NAND_ATMEL
+	sama5d3xek_nand_hw_init();
+#endif
+#ifdef CONFIG_CMD_USB
+	sama5d3xek_usb_hw_init();
+#endif
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+	sama5d3xek_mci_hw_init();
+#endif
+#ifdef CONFIG_ATMEL_SPI
+	at91_spi0_hw_init(1 << 0);
+#endif
+#ifdef CONFIG_MACB
+	if (has_emac())
+		at91_macb_hw_init();
+#endif
+#ifdef CONFIG_LCD
+	if (has_lcdc())
+		sama5d3xek_lcd_hw_init();
+#endif
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
+				    CONFIG_SYS_SDRAM_SIZE);
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+
+#ifdef CONFIG_MACB
+	if (has_emac())
+		rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
+#endif
+
+	return rc;
+}
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+int board_mmc_init(bd_t *bis)
+{
+	int rc = 0;
+
+	rc = atmel_mci_init((void *)ATMEL_BASE_MCI0);
+
+	return rc;
+}
+#endif
+
+/* SPI chip select control */
+#ifdef CONFIG_ATMEL_SPI
+#include <spi.h>
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	return bus == 0 && cs < 4;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+	switch (slave->cs) {
+	case 0:
+		at91_set_pio_output(AT91_PIO_PORTD, 13, 0);
+	case 1:
+		at91_set_pio_output(AT91_PIO_PORTD, 14, 0);
+	case 2:
+		at91_set_pio_output(AT91_PIO_PORTD, 15, 0);
+	case 3:
+		at91_set_pio_output(AT91_PIO_PORTD, 16, 0);
+	default:
+		break;
+	}
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	switch (slave->cs) {
+	case 0:
+		at91_set_pio_output(AT91_PIO_PORTD, 13, 1);
+	case 1:
+		at91_set_pio_output(AT91_PIO_PORTD, 14, 1);
+	case 2:
+		at91_set_pio_output(AT91_PIO_PORTD, 15, 1);
+	case 3:
+		at91_set_pio_output(AT91_PIO_PORTD, 16, 1);
+	default:
+		break;
+	}
+}
+#endif /* CONFIG_ATMEL_SPI */
diff --git a/boards.cfg b/boards.cfg
index ab71e50..ff0e517 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -241,6 +241,9 @@ am335x_evm_uart3             arm         armv7       am335x              ti
 am335x_evm_uart4             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL5,CONS_INDEX=5
 am335x_evm_uart5             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL6,CONS_INDEX=6
 pcm051                       arm         armv7       pcm051              phytec         am33xx      pcm051
+sama5d3xek_nandflash         arm         armv7       sama5d3xek          atmel          at91        sama5d3xek:SAMA5D3,SYS_USE_NANDFLASH
+sama5d3xek_sdcard            arm         armv7       sama5d3xek          atmel          at91        sama5d3xek:SAMA5D3,SYS_USE_MMC
+sama5d3xek_spiflash          arm         armv7       sama5d3xek          atmel          at91        sama5d3xek:SAMA5D3,SYS_USE_SERIALFLASH
 highbank                     arm         armv7       highbank            -              highbank
 mx51_efikamx                 arm         armv7       mx51_efikamx        genesi         mx5		mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
 mx51_efikasb                 arm         armv7       mx51_efikamx        genesi         mx5		mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
new file mode 100644
index 0000000..b5da1d3
--- /dev/null
+++ b/include/configs/sama5d3xek.h
@@ -0,0 +1,255 @@
+/*
+ * Configuation settings for the SAMA5D3xEK board.
+ *
+ * Copyright (C) 2012 - 2013 Atmel
+ *
+ * based on at91sam9m10g45ek.h by:
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/hardware.h>
+
+#define CONFIG_SYS_TEXT_BASE		0x26f00000
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK      32768
+#define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
+#define CONFIG_SYS_HZ		        1000
+
+#define CONFIG_AT91FAMILY
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_OF_LIBFDT		/* Device Tree support */
+
+/* general purpose I/O */
+#define CONFIG_AT91_GPIO
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
+#define	CONFIG_USART_ID			ATMEL_ID_DBGU
+
+/*
+ * This needs to be defined for the OHCI code to work but it is defined as
+ * ATMEL_ID_UHPHS in the CPU specific header files.
+ */
+#define ATMEL_ID_UHP			ATMEL_ID_UHPHS
+
+/*
+ * Specify the clock enable bit in the PMC_SCER register.
+ */
+#define ATMEL_PMC_UHP			AT91SAM926x_PMC_UHP
+
+/* LCD */
+#define CONFIG_LCD
+#define LCD_BPP				LCD_COLOR16
+#define LCD_OUTPUT_BPP                  24
+#define CONFIG_LCD_LOGO
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO
+#define CONFIG_LCD_INFO_BELOW_LOGO
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_ATMEL_HLCD
+#define CONFIG_ATMEL_LCD_RGB565
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+/* board specific(not enough SRAM) */
+#define CONFIG_SAMA5D3_LCD_BASE		0x23E00000
+
+#define CONFIG_BOOTDELAY		3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/* No NOR flash */
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_LOADS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_SIZE		0x20000000
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+
+/* SerialFlash */
+#define CONFIG_CMD_SF
+
+#ifdef CONFIG_CMD_SF
+#define CONFIG_ATMEL_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_ATMEL
+#define CONFIG_SF_DEFAULT_SPEED		30000000
+#endif
+
+/* NAND flash */
+#define CONFIG_CMD_NAND
+
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_MAX_CHIPS		1
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		ATMEL_BASE_CS3
+#define CONFIG_SYS_NAND_DBW_8
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+/* PMECC & PMERRLOC */
+#define CONFIG_ATMEL_NAND_HWECC
+#define CONFIG_ATMEL_NAND_HW_PMECC
+#define CONFIG_PMECC_CAP		4
+#define CONFIG_PMECC_SECTOR_SIZE	512
+#define CONFIG_PMECC_INDEX_TABLE_OFFSET	ATMEL_PMECC_INDEX_OFFSET_512
+#define CONFIG_CMD_NAND_TRIMFFS
+#endif
+
+/* Ethernet Hardware */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_MULTI
+#define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_MACB_SEARCH_PHY
+
+/* MMC */
+#define CONFIG_CMD_MMC
+
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#define ATMEL_BASE_MMCI			ATMEL_BASE_MCI0
+#endif
+
+/* USB */
+#define CONFIG_CMD_USB
+
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		ATMEL_BASE_OHCI
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"sama5d3"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	3
+#define CONFIG_DOS_PARTITION
+#define CONFIG_USB_STORAGE
+#endif
+
+#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
+#define CONFIG_CMD_FAT
+#endif
+
+#define CONFIG_SYS_LOAD_ADDR			0x22000000 /* load address */
+
+#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END			0x3e000000
+
+#ifdef CONFIG_SYS_USE_SERIALFLASH
+/* bootstrap + u-boot + env + linux in serial flash */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SYS_MONITOR_BASE (0x10000000 + 0x8400)
+#define CONFIG_ENV_OFFSET       0x5000
+#define CONFIG_ENV_ADDR         (0x10000000 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE         0x3000
+#define CONFIG_ENV_SECT_SIZE    0x1000
+#define CONFIG_BOOTCOMMAND      "sf probe 0; " \
+				"sf read 0x22000000 0x42000 0x300000; " \
+				"bootm 0x22000000"
+#elif CONFIG_SYS_USE_NANDFLASH
+/* bootstrap + u-boot + env in nandflash */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET		0xc0000
+#define CONFIG_ENV_OFFSET_REDUND	0x100000
+#define CONFIG_ENV_SIZE			0x20000
+#define CONFIG_BOOTCOMMAND	"nand read 0x21000000 0x180000 0x80000;" \
+				"nand read 0x22000000 0x200000 0x600000;" \
+				"bootm 0x22000000 - 0x21000000"
+#elif CONFIG_SYS_USE_MMC
+/* bootstrap + u-boot + env in sd card */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET		0x2000
+#define CONFIG_ENV_OFFSET_REDUND	0x4000
+#define CONFIG_ENV_SIZE			0x2000
+#define CONFIG_BOOTCOMMAND	"mmcinfo;fatload mmc 0:1 0x21000000 dtb;" \
+				"fatload mmc 0:1 0x22000000 uImage;" \
+				"bootm 0x22000000 - 0x21000000"
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#else
+#define CONIG_ENV_IS_NOWHERE
+#endif
+
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0,115200 earlyprintk "				\
+	"root=/dev/mmcblk0p2 "						\
+	"rw rootfstype=ext2 rootwait"
+#else
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0,115200 earlyprintk "				\
+	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
+	"256K(env),256k(evn_redundent),256k(spare),"			\
+	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
+	"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
+#endif
+
+#define CONFIG_BAUDRATE			115200
+
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)
+
+#endif
