@@ -444,9 +444,18 @@ $(obj)u-boot.ldr.hex: $(obj)u-boot.ldr
$(obj)u-boot.ldr.srec: $(obj)u-boot.ldr
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
+#
+# U-Boot entry point, needed for booting of full-blown U-Boot
+# from the SPL U-Boot version.
+#
+ifndef CONFIG_SYS_UBOOT_START
+CONFIG_SYS_UBOOT_START := 0
+endif
+
$(obj)u-boot.img: $(obj)u-boot.bin
$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
- -O u-boot -a $(CONFIG_SYS_TEXT_BASE) -e 0 \
+ -O u-boot -a $(CONFIG_SYS_TEXT_BASE) \
+ -e $(CONFIG_SYS_UBOOT_START) \
-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
This patch enabled boards using the SPL framework to set an entry point in the U-Boot mkimage image "u-boot.img". Until now the entry point in the header has been set to 0. By setting CONFIG_SYS_UBOOT_START in the board header, boards can override this default location. This will be used by the upcoming a3m071 MPC5200 board port. Signed-off-by: Stefan Roese <sr@denx.de> --- Makefile | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)