diff --git a/MAINTAINERS b/MAINTAINERS
index aa54fe1..07dc789 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -183,7 +183,6 @@ Thomas Frieden <ThomasF@hyperion-entertainment.com>
 
 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 
-	ADCIOP		IOP480 (PPC401)
 	APC405		PPC405GP
 	AR405		PPC405GP
 	ASH405		PPC405EP
@@ -194,7 +193,6 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 	CPCI405AB	PPC405GP
 	CPCI405DT	PPC405GP
 	CPCIISER4	PPC405GP
-	DASA_SIM	IOP480 (PPC401)
 	DP405		PPC405EP
 	DU405		PPC405GP
 	DU440		PPC440EPx
diff --git a/arch/powerpc/cpu/ppc4xx/Makefile b/arch/powerpc/cpu/ppc4xx/Makefile
index 3d62255..8da2f86 100644
--- a/arch/powerpc/cpu/ppc4xx/Makefile
+++ b/arch/powerpc/cpu/ppc4xx/Makefile
@@ -53,7 +53,6 @@ COBJS	+= ecc.o
 COBJS-$(CONFIG_CMD_ECCTEST) += cmd_ecctest.o
 COBJS	+= fdt.o
 COBJS	+= interrupts.o
-COBJS	+= iop480_uart.o
 COBJS-$(CONFIG_CMD_REGINFO) += reginfo.o
 COBJS	+= sdram.o
 COBJS	+= speed.o
diff --git a/arch/powerpc/cpu/ppc4xx/cpu.c b/arch/powerpc/cpu/ppc4xx/cpu.c
index 67f1fff..60aba8c 100644
--- a/arch/powerpc/cpu/ppc4xx/cpu.c
+++ b/arch/powerpc/cpu/ppc4xx/cpu.c
@@ -79,7 +79,7 @@ static int pci_async_enabled(void)
 #endif
 #endif /* CONFIG_PCI */
 
-#if defined(CONFIG_PCI) && !defined(CONFIG_IOP480) && \
+#if defined(CONFIG_PCI) && \
     !defined(CONFIG_405) && !defined(CONFIG_405EX)
 int pci_arbiter_enabled(void)
 {
@@ -303,7 +303,6 @@ int checkcpu (void)
 	u32 reg;
 #endif
 
-#if !defined(CONFIG_IOP480)
 	char addstr[64] = "";
 	sys_info_t sys_info;
 	int cpu_num;
@@ -671,14 +670,6 @@ int checkcpu (void)
 	printf ("       16 kB I-Cache %d kB D-Cache",
 		((pvr | 0x00000001) == PVR_405GPR_RB) ? 16 : 8);
 #endif
-#endif /* !defined(CONFIG_IOP480) */
-
-#if defined(CONFIG_IOP480)
-	printf ("PLX IOP480 (PVR=%08x)", pvr);
-	printf (" at %s MHz:", strmhz(buf, clock));
-	printf (" %u kB I-Cache", 4);
-	printf (" %u kB D-Cache", 2);
-#endif
 
 #endif /* !defined(CONFIG_405) */
 
@@ -723,15 +714,10 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
  */
 unsigned long get_tbclk (void)
 {
-#if !defined(CONFIG_IOP480)
 	sys_info_t  sys_info;
 
 	get_sys_info(&sys_info);
 	return (sys_info.freqProcessor);
-#else
-	return (66000000);
-#endif
-
 }
 
 
diff --git a/arch/powerpc/cpu/ppc4xx/iop480_uart.c b/arch/powerpc/cpu/ppc4xx/iop480_uart.c
deleted file mode 100644
index 027ca30..0000000
--- a/arch/powerpc/cpu/ppc4xx/iop480_uart.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <watchdog.h>
-
-#ifdef CONFIG_SERIAL_MULTI
-#include <serial.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_IOP480
-
-#define SPU_BASE         0x40000000
-
-#define spu_LineStat_rc  0x00	/* Line Status Register (Read/Clear) */
-#define spu_LineStat_w   0x04	/* Line Status Register (Set) */
-#define spu_Handshk_rc   0x08	/* Handshake Status Register (Read/Clear) */
-#define spu_Handshk_w    0x0c	/* Handshake Status Register (Set) */
-#define spu_BRateDivh    0x10	/* Baud rate divisor high */
-#define spu_BRateDivl    0x14	/* Baud rate divisor low */
-#define spu_CtlReg       0x18	/* Control Register */
-#define spu_RxCmd        0x1c	/* Rx Command Register */
-#define spu_TxCmd        0x20	/* Tx Command Register */
-#define spu_RxBuff       0x24	/* Rx data buffer */
-#define spu_TxBuff       0x24	/* Tx data buffer */
-
-/*-----------------------------------------------------------------------------+
-  | Line Status Register.
-  +-----------------------------------------------------------------------------*/
-#define asyncLSRport1           0x40000000
-#define asyncLSRport1set        0x40000004
-#define asyncLSRDataReady             0x80
-#define asyncLSRFramingError          0x40
-#define asyncLSROverrunError          0x20
-#define asyncLSRParityError           0x10
-#define asyncLSRBreakInterrupt        0x08
-#define asyncLSRTxHoldEmpty           0x04
-#define asyncLSRTxShiftEmpty          0x02
-
-/*-----------------------------------------------------------------------------+
-  | Handshake Status Register.
-  +-----------------------------------------------------------------------------*/
-#define asyncHSRport1           0x40000008
-#define asyncHSRport1set        0x4000000c
-#define asyncHSRDsr                   0x80
-#define asyncLSRCts                   0x40
-
-/*-----------------------------------------------------------------------------+
-  | Control Register.
-  +-----------------------------------------------------------------------------*/
-#define asyncCRport1            0x40000018
-#define asyncCRNormal                 0x00
-#define asyncCRLoopback               0x40
-#define asyncCRAutoEcho               0x80
-#define asyncCRDtr                    0x20
-#define asyncCRRts                    0x10
-#define asyncCRWordLength7            0x00
-#define asyncCRWordLength8            0x08
-#define asyncCRParityDisable          0x00
-#define asyncCRParityEnable           0x04
-#define asyncCREvenParity             0x00
-#define asyncCROddParity              0x02
-#define asyncCRStopBitsOne            0x00
-#define asyncCRStopBitsTwo            0x01
-#define asyncCRDisableDtrRts          0x00
-
-/*-----------------------------------------------------------------------------+
-  | Receiver Command Register.
-  +-----------------------------------------------------------------------------*/
-#define asyncRCRport1           0x4000001c
-#define asyncRCRDisable               0x00
-#define asyncRCREnable                0x80
-#define asyncRCRIntDisable            0x00
-#define asyncRCRIntEnabled            0x20
-#define asyncRCRDMACh2                0x40
-#define asyncRCRDMACh3                0x60
-#define asyncRCRErrorInt              0x10
-#define asyncRCRPauseEnable           0x08
-
-/*-----------------------------------------------------------------------------+
-  | Transmitter Command Register.
-  +-----------------------------------------------------------------------------*/
-#define asyncTCRport1           0x40000020
-#define asyncTCRDisable               0x00
-#define asyncTCREnable                0x80
-#define asyncTCRIntDisable            0x00
-#define asyncTCRIntEnabled            0x20
-#define asyncTCRDMACh2                0x40
-#define asyncTCRDMACh3                0x60
-#define asyncTCRTxEmpty               0x10
-#define asyncTCRErrorInt              0x08
-#define asyncTCRStopPause             0x04
-#define asyncTCRBreakGen              0x02
-
-/*-----------------------------------------------------------------------------+
-  | Miscellanies defines.
-  +-----------------------------------------------------------------------------*/
-#define asyncTxBufferport1      0x40000024
-#define asyncRxBufferport1      0x40000024
-#define asyncDLABLsbport1       0x40000014
-#define asyncDLABMsbport1       0x40000010
-#define asyncXOFFchar                 0x13
-#define asyncXONchar                  0x11
-
-/*
- * Minimal serial functions needed to use one of the SMC ports
- * as serial console interface.
- */
-
-int serial_init (void)
-{
-	unsigned short br_reg;
-
-	br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
-
-	/*
-	 * Init onboard UART
-	 */
-	out_8((u8 *)SPU_BASE + spu_LineStat_rc, 0x78); /* Clear all bits in Line Status Reg */
-	out_8((u8 *)SPU_BASE + spu_BRateDivl, (br_reg & 0x00ff)); /* Set baud rate divisor... */
-	out_8((u8 *)SPU_BASE + spu_BRateDivh, ((br_reg & 0xff00) >> 8)); /* ... */
-	out_8((u8 *)SPU_BASE + spu_CtlReg, 0x08);	/* Set 8 bits, no parity and 1 stop bit */
-	out_8((u8 *)SPU_BASE + spu_RxCmd, 0xb0);	/* Enable Rx */
-	out_8((u8 *)SPU_BASE + spu_TxCmd, 0x9c);	/* Enable Tx */
-	out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff);	/* Clear Handshake */
-	in_8((u8 *)SPU_BASE + spu_RxBuff);	/* Dummy read, to clear receiver */
-
-	return (0);
-}
-
-void serial_setbrg (void)
-{
-	unsigned short br_reg;
-
-	br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
-
-	out_8((u8 *)SPU_BASE + spu_BRateDivl,
-	      (br_reg & 0x00ff)); /* Set baud rate divisor... */
-	out_8((u8 *)SPU_BASE + spu_BRateDivh,
-	      ((br_reg & 0xff00) >> 8)); /* ... */
-}
-
-void serial_putc (const char c)
-{
-	if (c == '\n')
-		serial_putc ('\r');
-
-	/* load status from handshake register */
-	if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00)
-		out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff);	/* Clear Handshake */
-
-	out_8((u8 *)SPU_BASE + spu_TxBuff, c);	/* Put char */
-
-	while ((in_8((u8 *)SPU_BASE + spu_LineStat_rc) & 04) != 04) {
-		if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00)
-			out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff);	/* Clear Handshake */
-	}
-}
-
-void serial_puts (const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
-int serial_getc ()
-{
-	unsigned char status = 0;
-
-	while (1) {
-		status = in_8((u8 *)asyncLSRport1);
-		if ((status & asyncLSRDataReady) != 0x0) {
-			break;
-		}
-		if ((status & ( asyncLSRFramingError |
-				asyncLSROverrunError |
-				asyncLSRParityError  |
-				asyncLSRBreakInterrupt )) != 0) {
-			(void) out_8((u8 *)asyncLSRport1,
-				     asyncLSRFramingError |
-				     asyncLSROverrunError |
-				     asyncLSRParityError  |
-				     asyncLSRBreakInterrupt );
-		}
-	}
-	return (0x000000ff & (int) in_8((u8 *)asyncRxBufferport1));
-}
-
-int serial_tstc ()
-{
-	unsigned char status;
-
-	status = in_8((u8 *)asyncLSRport1);
-	if ((status & asyncLSRDataReady) != 0x0) {
-		return (1);
-	}
-	if ((status & ( asyncLSRFramingError |
-			asyncLSROverrunError |
-			asyncLSRParityError  |
-			asyncLSRBreakInterrupt )) != 0) {
-		(void) out_8((u8 *)asyncLSRport1,
-			     asyncLSRFramingError |
-			     asyncLSROverrunError |
-			     asyncLSRParityError  |
-			     asyncLSRBreakInterrupt);
-	}
-	return 0;
-}
-
-#endif	/* CONFIG_IOP480 */
diff --git a/arch/powerpc/cpu/ppc4xx/speed.c b/arch/powerpc/cpu/ppc4xx/speed.c
index 09d6671..6156ac9 100644
--- a/arch/powerpc/cpu/ppc4xx/speed.c
+++ b/arch/powerpc/cpu/ppc4xx/speed.c
@@ -1190,22 +1190,12 @@ void get_sys_info (sys_info_t * sysInfo)
 
 int get_clocks (void)
 {
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
-    defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
-    defined(CONFIG_405EX) || defined(CONFIG_405) || \
-    defined(CONFIG_440)
 	sys_info_t sys_info;
 
 	get_sys_info (&sys_info);
 	gd->cpu_clk = sys_info.freqProcessor;
 	gd->bus_clk = sys_info.freqPLB;
 
-#endif	/* defined(CONFIG_405GP) || defined(CONFIG_405CR) */
-
-#ifdef CONFIG_IOP480
-	gd->cpu_clk = 66000000;
-	gd->bus_clk = 66000000;
-#endif
 	return (0);
 }
 
@@ -1226,11 +1216,6 @@ ulong get_bus_freq (ulong dummy)
 
 	get_sys_info (&sys_info);
 	val = sys_info.freqPLB;
-
-#elif defined(CONFIG_IOP480)
-
-	val = 66;
-
 #else
 # error get_bus_freq() not implemented
 #endif
@@ -1238,7 +1223,6 @@ ulong get_bus_freq (ulong dummy)
 	return val;
 }
 
-#if !defined(CONFIG_IOP480)
 ulong get_OPB_freq (void)
 {
 	PPC4xx_SYS_INFO sys_info;
@@ -1247,4 +1231,3 @@ ulong get_OPB_freq (void)
 
 	return sys_info.freqOPB;
 }
-#endif
diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S
index 3b0e364..7aef43b 100644
--- a/arch/powerpc/cpu/ppc4xx/start.S
+++ b/arch/powerpc/cpu/ppc4xx/start.S
@@ -806,114 +806,6 @@ _start:
 #endif /* CONFIG_440 */
 
 /*****************************************************************************/
-#ifdef CONFIG_IOP480
-	/*----------------------------------------------------------------------- */
-	/* Set up some machine state registers. */
-	/*----------------------------------------------------------------------- */
-	addi	r0,r0,0x0000		/* initialize r0 to zero */
-	mtspr	SPRN_ESR,r0		/* clear Exception Syndrome Reg */
-	mttcr	r0			/* timer control register */
-	mtexier r0			/* disable all interrupts */
-	addis	r4,r0,0xFFFF		/* set r4 to 0xFFFFFFFF (status in the */
-	ori	r4,r4,0xFFFF		/* dbsr is cleared by setting bits to 1) */
-	mtdbsr	r4			/* clear/reset the dbsr */
-	mtexisr r4			/* clear all pending interrupts */
-	addis	r4,r0,0x8000
-	mtexier r4			/* enable critical exceptions */
-	addis	r4,r0,0x0000		/* assume 403GCX - enable core clk */
-	ori	r4,r4,0x4020		/* dbling (no harm done on GA and GC */
-	mtiocr	r4			/* since bit not used) & DRC to latch */
-					/* data bus on rising edge of CAS */
-	/*----------------------------------------------------------------------- */
-	/* Clear XER. */
-	/*----------------------------------------------------------------------- */
-	mtxer	r0
-	/*----------------------------------------------------------------------- */
-	/* Invalidate i-cache and d-cache TAG arrays. */
-	/*----------------------------------------------------------------------- */
-	addi	r3,0,1024		/* 1/4 of I-cache size, half of D-cache */
-	addi	r4,0,1024		/* 1/4 of I-cache */
-..cloop:
-	iccci	0,r3
-	iccci	r4,r3
-	dccci	0,r3
-	addic.	r3,r3,-16		/* move back one cache line */
-	bne	..cloop			/* loop back to do rest until r3 = 0 */
-
-	/* */
-	/* initialize IOP480 so it can read 1 MB code area for SRAM spaces */
-	/* this requires enabling MA[17..0], by default only MA[12..0] are enabled. */
-	/* */
-
-	/* first copy IOP480 register base address into r3 */
-	addis	r3,0,0x5000		/* IOP480 register base address hi */
-/*	ori	r3,r3,0x0000		/  IOP480 register base address lo */
-
-#ifdef CONFIG_ADCIOP
-	/* use r4 as the working variable */
-	/* turn on CS3 (LOCCTL.7) */
-	lwz	r4,0x84(r3)		/* LOCTL is at offset 0x84 */
-	andi.	r4,r4,0xff7f		/* make bit 7 = 0 -- CS3 mode */
-	stw	r4,0x84(r3)		/* LOCTL is at offset 0x84 */
-#endif
-
-#ifdef CONFIG_DASA_SIM
-	/* use r4 as the working variable */
-	/* turn on MA17 (LOCCTL.7) */
-	lwz	r4,0x84(r3)		/* LOCTL is at offset 0x84 */
-	ori	r4,r4,0x80		/* make bit 7 = 1 -- MA17 mode */
-	stw	r4,0x84(r3)		/* LOCTL is at offset 0x84 */
-#endif
-
-	/* turn on MA16..13 (LCS0BRD.12 = 0) */
-	lwz	r4,0x100(r3)		/* LCS0BRD is at offset 0x100 */
-	andi.	r4,r4,0xefff		/* make bit 12 = 0 */
-	stw	r4,0x100(r3)		/* LCS0BRD is at offset 0x100 */
-
-	/* make sure above stores all comlete before going on */
-	sync
-
-	/* last thing, set local init status done bit (DEVINIT.31) */
-	lwz	r4,0x80(r3)		/* DEVINIT is at offset 0x80 */
-	oris	r4,r4,0x8000		/* make bit 31 = 1 */
-	stw	r4,0x80(r3)		/* DEVINIT is at offset 0x80 */
-
-	/* clear all pending interrupts and disable all interrupts */
-	li	r4,-1			/* set p1 to 0xffffffff */
-	stw	r4,0x1b0(r3)		/* clear all pending interrupts */
-	stw	r4,0x1b8(r3)		/* clear all pending interrupts */
-	li	r4,0			/* set r4 to 0 */
-	stw	r4,0x1b4(r3)		/* disable all interrupts */
-	stw	r4,0x1bc(r3)		/* disable all interrupts */
-
-	/* make sure above stores all comlete before going on */
-	sync
-
-	/* Set-up icache cacheability. */
-	lis	r1, CONFIG_SYS_ICACHE_SACR_VALUE@h
-	ori	r1, r1, CONFIG_SYS_ICACHE_SACR_VALUE@l
-	mticcr	r1
-	isync
-
-	/* Set-up dcache cacheability. */
-	lis	r1, CONFIG_SYS_DCACHE_SACR_VALUE@h
-	ori	r1, r1, CONFIG_SYS_DCACHE_SACR_VALUE@l
-	mtdccr	r1
-
-	addis	r1,r0,CONFIG_SYS_INIT_RAM_ADDR@h
-	ori	r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack to SDRAM */
-	li	r0, 0			/* Make room for stack frame header and */
-	stwu	r0, -4(r1)		/* clear final stack frame so that	*/
-	stwu	r0, -4(r1)		/* stack backtraces terminate cleanly	*/
-
-	GET_GOT			/* initialize GOT access			*/
-
-	bl	board_init_f	/* run first part of init code (from Flash)	*/
-	/* NOTREACHED - board_init_f() does not return */
-
-#endif	/* CONFIG_IOP480 */
-
-/*****************************************************************************/
 #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
     defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
     defined(CONFIG_405EX) || defined(CONFIG_405)
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index e6b8f69..5f9c640 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -8,7 +8,7 @@
 #include <asm/processor.h>
 
 /* bytes per L1 cache line */
-#if defined(CONFIG_8xx) || defined(CONFIG_IOP480)
+#if defined(CONFIG_8xx)
 #define	L1_CACHE_SHIFT	4
 #elif defined(CONFIG_PPC64BRIDGE)
 #define L1_CACHE_SHIFT	7
diff --git a/arch/powerpc/include/asm/ppc405.h b/arch/powerpc/include/asm/ppc405.h
index 14a7a37..892848a 100644
--- a/arch/powerpc/include/asm/ppc405.h
+++ b/arch/powerpc/include/asm/ppc405.h
@@ -28,11 +28,7 @@
 #define PPC_128MB_SACR_BIT(addr)	((addr) >> 27)
 #define PPC_128MB_SACR_VALUE(addr)	PPC_REG_VAL(PPC_128MB_SACR_BIT(addr),1)
 
-#ifndef CONFIG_IOP480
 #define CONFIG_SYS_DCACHE_SIZE		(16 << 10)	/* For AMCC 405 CPUs */
-#else
-#define CONFIG_SYS_DCACHE_SIZE		(2 << 10)	/* For PLX IOP480(403)*/
-#endif
 
 /* DCR registers */
 #define PLB0_ACR	0x0087
diff --git a/boards.cfg b/boards.cfg
index b4e0d3c..343859e 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -1017,7 +1017,6 @@ PPChameleonEVB_HI_25         powerpc     ppc4xx      PPChameleonEVB      dave
 PPChameleonEVB_HI_33         powerpc     ppc4xx      PPChameleonEVB      dave           -           PPChameleonEVB:PPCHAMELEON_MODULE_MODEL=2,PPCHAMELEON_CLK_33
 PPChameleonEVB_ME_25         powerpc     ppc4xx      PPChameleonEVB      dave           -           PPChameleonEVB:PPCHAMELEON_MODULE_MODEL=1,PPCHAMELEON_CLK_25
 PPChameleonEVB_ME_33         powerpc     ppc4xx      PPChameleonEVB      dave           -           PPChameleonEVB:PPCHAMELEON_MODULE_MODEL=1,PPCHAMELEON_CLK_33
-ADCIOP                       powerpc     ppc4xx      adciop              esd
 APC405                       powerpc     ppc4xx      apc405              esd
 AR405                        powerpc     ppc4xx      ar405               esd
 ASH405                       powerpc     ppc4xx      ash405              esd
@@ -1029,7 +1028,6 @@ CPCI4052                     powerpc     ppc4xx      cpci405             esd
 CPCI405AB                    powerpc     ppc4xx      cpci405             esd
 CPCI405DT                    powerpc     ppc4xx      cpci405             esd
 CPCIISER4                    powerpc     ppc4xx      cpciiser4           esd
-DASA_SIM                     powerpc     ppc4xx      dasa_sim            esd
 DP405                        powerpc     ppc4xx      dp405               esd
 DU405                        powerpc     ppc4xx      du405               esd
 DU440                        powerpc     ppc4xx      du440               esd
diff --git a/include/common.h b/include/common.h
index 55025c0..100e550 100644
--- a/include/common.h
+++ b/include/common.h
@@ -670,7 +670,7 @@ static inline ulong get_ddr_freq(ulong dummy)
 }
 #endif
 
-#if defined(CONFIG_4xx) || defined(CONFIG_IOP480)
+#if defined(CONFIG_4xx)
 #  if defined(CONFIG_440)
 #	if defined(CONFIG_440SPE)
 	 unsigned long determine_sysper(void);
diff --git a/include/configs/ADCIOP.h b/include/configs/ADCIOP.h
deleted file mode 100644
index 5cd8eef..0000000
--- a/include/configs/ADCIOP.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_IOP480		1	/* This is a IOP480 CPU		*/
-#define CONFIG_ADCIOP		1	/* ...on a ADCIOP board		*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFFD0000
-
-#define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
-
-#define CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
-
-#define CONFIG_CPUCLOCK		66
-#define CONFIG_BUSCLOCK		(CONFIG_CPUCLOCK)
-
-#define CONFIG_BAUDRATE		9600
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
-#define CONFIG_BOOTCOMMAND	"bootm ffc00000" /* autoboot command	*/
-
-#undef	CONFIG_BOOTARGS
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-#define CONFIG_PHY_ADDR		0	/* PHY address			*/
-
-#define CONFIG_IPADDR		10.0.18.222
-#define CONFIG_SERVERIP		10.0.18.190
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_ASKENV
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
-
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x00df0000 /* inside of SDRAM			*/
-#define CONFIG_SYS_INIT_RAM_SIZE	0x0f00	/* Size of used area in RAM	       */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0xFFFD0000
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned char	/* flash word size (width)	*/
-#define CONFIG_SYS_FLASH_ADDR0		0x0AA9	/* 1st address for flash config cycles	*/
-#define CONFIG_SYS_FLASH_ADDR1		0x0556	/* 2nd address for flash config cycles	*/
-/*
- * The following defines are added for buggy IOP480 byte interface.
- * All other boards should use the standard values (CPCI405 etc.)
- */
-#define CONFIG_SYS_FLASH_READ0		0x0002	/* 0 is standard			*/
-#define CONFIG_SYS_FLASH_READ1		0x0000	/* 1 is standard			*/
-#define CONFIG_SYS_FLASH_READ2		0x0004	/* 2 is standard			*/
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-
-#if 1 /* Use NVRAM for environment variables */
-/*-----------------------------------------------------------------------
- * NVRAM organization
- */
-#define CONFIG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
-#define CONFIG_SYS_NVRAM_BASE_ADDR	0x10000000		/* NVRAM base address	*/
-#define CONFIG_SYS_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
-#define CONFIG_ENV_SIZE		0x0400		/* Size of Environment vars	*/
-#define CONFIG_ENV_ADDR		\
-	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE)	/* Env	*/
-#define CONFIG_SYS_VXWORKS_MAC_PTR     (CONFIG_SYS_NVRAM_BASE_ADDR+0x7800) /* VxWorks eth-addr*/
-
-#else /* Use FLASH for environment variables */
-
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OFFSET		0x00010000	/* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
-
-#define CONFIG_ENV_SECT_SIZE	0x8000	/* see README - env sector total size	*/
-
-#endif
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- */
-#define CONFIG_PCI			/* include pci support			*/
-#undef CONFIG_PCI_PNP
-
-
-#define CONFIG_TULIP
-
-#define CONFIG_SYS_ETH_DEV_FN	     0x0000
-#define CONFIG_SYS_ETH_IOBASE	     0x0fff0000
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0xFFC00000	/* FLASH bank #0	*/
-#define FLASH_BASE1_PRELIM	0xFFE00000	/* FLASH bank #1	*/
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/DASA_SIM.h b/include/configs/DASA_SIM.h
deleted file mode 100644
index 6fe7fd3..0000000
--- a/include/configs/DASA_SIM.h
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_IOP480		1	/* This is a IOP480 CPU		*/
-#define CONFIG_DASA_SIM		1	/* ...on a DASA_SIM board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
-#define CONFIG_SYS_LDSCRIPT	"board/esd/dasa_sim/u-boot.lds"
-
-#define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
-
-#define CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
-
-#define CONFIG_CPUCLOCK		66
-#define CONFIG_BUSCLOCK		(CONFIG_CPUCLOCK)
-
-#define CONFIG_BAUDRATE		9600
-#define CONFIG_BOOTDELAY	3	/* autoboot after 5 seconds	*/
-#define CONFIG_BOOTCOMMAND	"bootm ffe00000" /* autoboot command	*/
-
-#undef	CONFIG_BOOTARGS
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-#define CONFIG_IPADDR		10.0.18.222
-#define CONFIG_SERVERIP		10.0.18.190
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BSP
-
-
-#if 0 /* Does not appear to be used?!  If it is used, needs to be fixed */
-#define CONFIG_SOFT_I2C			/* Software I2C support enabled */
-#endif
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
-
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x00df0000 /* inside of SDRAM			*/
-#define CONFIG_SYS_INIT_RAM_SIZE	0x0f00	/* Size of used area in RAM	       */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 128 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned char	/* flash word size (width)	*/
-#define CONFIG_SYS_FLASH_ADDR0		0x0AA9	/* 1st address for flash config cycles	*/
-#define CONFIG_SYS_FLASH_ADDR1		0x0556	/* 2nd address for flash config cycles	*/
-/*
- * The following defines are added for buggy IOP480 byte interface.
- * All other boards should use the standard values (CPCI405 etc.)
- */
-#define CONFIG_SYS_FLASH_READ0		0x0002	/* 0 is standard			*/
-#define CONFIG_SYS_FLASH_READ1		0x0000	/* 1 is standard			*/
-#define CONFIG_SYS_FLASH_READ2		0x0004	/* 2 is standard			*/
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OFFSET		0x00010000	/* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
-
-#if 0
-#define CONFIG_ENV_SECT_SIZE	0x8000	/* see README - env sector total size	*/
-#else
-#define CONFIG_ENV_SECT_SIZE	0x10000 /* see README - env sector total size	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- */
-#define CONFIG_PCI			/* include pci support			*/
-#undef CONFIG_PCI_PNP
-
-
-#define CONFIG_TULIP
-
-#define CONFIG_SYS_ETH_DEV_FN	     0x0000
-#define CONFIG_SYS_ETH_IOBASE	     0x0fff0000
-#define CONFIG_SYS_PCI9054_DEV_FN   0x0800
-#define CONFIG_SYS_PCI9054_IOBASE   0x0eff0000
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0xFFE00000	/* FLASH bank #0	*/
-
-#endif	/* __CONFIG_H */
diff --git a/include/vxworks.h b/include/vxworks.h
index 917a9ff..736e3b5 100644
--- a/include/vxworks.h
+++ b/include/vxworks.h
@@ -39,8 +39,6 @@ int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
 #ifndef CONFIG_SYS_VXWORKS_BOOT_DEVICE
 #if defined(CONFIG_4xx)
 #define		CONFIG_SYS_VXWORKS_BOOT_DEVICE "emac(0,0)"
-#elif defined(CONFIG_IOP480)
-#define		CONFIG_SYS_VXWORKS_BOOT_DEVICE "dc(0,0)"
 #else
 #define		CONFIG_SYS_VXWORKS_BOOT_DEVICE "eth(0,0)"
 #endif
