Message ID | 1345140514-9048-1-git-send-email-albert.u.boot@aribaud.net |
---|---|
State | Superseded |
Delegated to: | Prafulla Wadaskar |
Headers | show |
> -----Original Message----- > From: u-boot-bounces@lists.denx.de [mailto:u-boot- > bounces@lists.denx.de] On Behalf Of Albert ARIBAUD > Sent: 16 August 2012 23:39 > To: u-boot@lists.denx.de > Subject: [U-Boot] [PATCH] ARM: lacie_kw: add support for > WIRELESS_SPACE > > > Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> > --- > > This patch adds the Wireless Space to the lacie_kw sub-targets. > It *should* not change a thing to the already existing sub-targets > (except that each one gets its own prompt). > > Owners of NETSPACE_[MAX]_V2, INETSPACE_V2, NET2BIG_V2 please test. > > board/LaCie/netspace_v2/netspace_v2.c | 42 ++---------- > board/LaCie/netspace_v2/netspace_v2.h | 121 > +++++++++++++++++++++++++++++++++ > boards.cfg | 1 + > drivers/net/mvgbe.c | 10 ++- It would be good if you split the patch, to me the change to above file is generic, which is your dependency. > include/configs/lacie_kw.h | 38 ++++++++++- > 5 files changed, 175 insertions(+), 37 deletions(-) > ...snip... > diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h > index c35c2db..a979ab4 100644 > --- a/include/configs/lacie_kw.h > +++ b/include/configs/lacie_kw.h > @@ -33,6 +33,10 @@ > #elif defined(CONFIG_NET2BIG_V2) > #define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2 > #define CONFIG_IDENT_STRING " 2Big v2" > +#elif defined(CONFIG_WIRELESS_SPACE) > +#define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in mach-types.h > */ > +#define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE > +#define CONFIG_IDENT_STRING " Wireless Space" > #else > #error "Unknown board" > #endif > @@ -73,6 +77,12 @@ > #define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage- > is2.cfg > #endif > > +#ifdef CONFIG_WIRELESS_SPACE > +/* No SPI but NAND */ > +#undef CONFIG_CMD_SF > +#define CONFIG_CMD_NAND > +#endif > + > /* > * mv-common.h should be defined after CMD configs since it used them > * to enable certain macros > @@ -90,8 +100,14 @@ > #define CONFIG_SYS_IDE_MAXDEVICE 1 > #if defined(CONFIG_NET2BIG_V2) > #define CONFIG_SYS_PROMPT "2big2> " > -#else > +#elif defined(CONFIG_NETSPACE_V2) > #define CONFIG_SYS_PROMPT "ns2> " > +#elif defined(CONFIG_INETSPACE_V2) > +#define CONFIG_SYS_PROMPT "is2> " > +#elif defined(CONFIG_WIRELESS_SPACE) > +#define CONFIG_SYS_PROMPT "ws> " > +#else > +#define CONFIG_SYS_PROMPT "lacie-kw> " > #endif > > /* > @@ -99,7 +115,16 @@ > */ > #ifdef CONFIG_CMD_NET > #define CONFIG_MISC_INIT_R /* Call misc_init_r() to initialize MAC > address */ > +#if defined(CONFIG_WIRELESS_SPACE) > +#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports only */ > +#define CONFIG_EGIGA1_PHY 0x6 /* egiga1 has a PHY, egiga0 > has NOT */ > +#define CONFIG_MVGBE_PHY_ADRS {0xa, 0x6} > +#define CONFIG_MII > +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN > +#else > #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ > +#define CONFIG_EGIGA0_PHY 0x8 > +#endif > #define CONFIG_NETCONSOLE > #endif > > @@ -154,11 +179,20 @@ > /* > * Environment variables configurations > */ > + > +#if defined(CONFIG_WIRELESS_SPACE) > +#define CONFIG_ENV_IS_IN_NAND > +#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64KB */ > +#define CONFIG_ENV_SIZE 0x1000 /* 4KB */ > +#define CONFIG_ENV_ADDR 0x70000 > +#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ > +#else > #define CONFIG_ENV_IS_IN_SPI_FLASH > #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64KB */ > #define CONFIG_ENV_SIZE 0x1000 /* 4KB */ > #define CONFIG_ENV_ADDR 0x70000 > #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ > +#endif > > /* > * Default environment variables > @@ -185,4 +219,6 @@ > "usbload=usb start && " \ > "fatload usb 0:1 $loadaddr /boot/$bootfile\0" > > +//#define DEBUG Either remove it or make it c-style comments. Regards... Prafulla . . . > + > #endif /* _CONFIG_LACIE_KW_H */ > -- > 1.7.9.5 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot
Hi Prafulla, On Fri, 17 Aug 2012 00:59:24 -0700, Prafulla Wadaskar <prafulla@marvell.com> wrote: > > > > -----Original Message----- > > From: u-boot-bounces@lists.denx.de [mailto:u-boot- > > bounces@lists.denx.de] On Behalf Of Albert ARIBAUD > > Sent: 16 August 2012 23:39 > > To: u-boot@lists.denx.de > > Subject: [U-Boot] [PATCH] ARM: lacie_kw: add support for > > WIRELESS_SPACE > > > > > > Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> > > --- > > > > This patch adds the Wireless Space to the lacie_kw sub-targets. > > It *should* not change a thing to the already existing sub-targets > > (except that each one gets its own prompt). > > > > Owners of NETSPACE_[MAX]_V2, INETSPACE_V2, NET2BIG_V2 please test. > > > > board/LaCie/netspace_v2/netspace_v2.c | 42 ++---------- > > board/LaCie/netspace_v2/netspace_v2.h | 121 > > +++++++++++++++++++++++++++++++++ > > boards.cfg | 1 + > > drivers/net/mvgbe.c | 10 ++- > > It would be good if you split the patch, to me the change to above > file is generic, which is your dependency. You're correct. I'll post V2 as a two-patch series. > > include/configs/lacie_kw.h | 38 ++++++++++- > > 5 files changed, 175 insertions(+), 37 deletions(-) > > > ...snip... > > diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h > > index c35c2db..a979ab4 100644 > > --- a/include/configs/lacie_kw.h > > +++ b/include/configs/lacie_kw.h > > @@ -33,6 +33,10 @@ > > #elif defined(CONFIG_NET2BIG_V2) > > #define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2 > > #define CONFIG_IDENT_STRING " 2Big v2" > > +#elif defined(CONFIG_WIRELESS_SPACE) > > +#define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in > > mach-types.h */ > > +#define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE > > +#define CONFIG_IDENT_STRING " Wireless Space" > > #else > > #error "Unknown board" > > #endif > > @@ -73,6 +77,12 @@ > > #define CONFIG_SYS_KWD_CONFIG > > $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage- is2.cfg > > #endif > > > > +#ifdef CONFIG_WIRELESS_SPACE > > +/* No SPI but NAND */ > > +#undef CONFIG_CMD_SF > > +#define CONFIG_CMD_NAND > > +#endif > > + > > /* > > * mv-common.h should be defined after CMD configs since it used > > them > > * to enable certain macros > > @@ -90,8 +100,14 @@ > > #define CONFIG_SYS_IDE_MAXDEVICE 1 > > #if defined(CONFIG_NET2BIG_V2) > > #define CONFIG_SYS_PROMPT "2big2> " > > -#else > > +#elif defined(CONFIG_NETSPACE_V2) > > #define CONFIG_SYS_PROMPT "ns2> " > > +#elif defined(CONFIG_INETSPACE_V2) > > +#define CONFIG_SYS_PROMPT "is2> " > > +#elif defined(CONFIG_WIRELESS_SPACE) > > +#define CONFIG_SYS_PROMPT "ws> " > > +#else > > +#define CONFIG_SYS_PROMPT "lacie-kw> " > > #endif > > > > /* > > @@ -99,7 +115,16 @@ > > */ > > #ifdef CONFIG_CMD_NET > > #define CONFIG_MISC_INIT_R /* Call misc_init_r() to initialize MAC > > address */ > > +#if defined(CONFIG_WIRELESS_SPACE) > > +#define CONFIG_MVGBE_PORTS {1, 1} /* enable > > both ports only */ +#define CONFIG_EGIGA1_PHY > > 0x6 /* egiga1 has a PHY, egiga0 has NOT */ > > +#define CONFIG_MVGBE_PHY_ADRS {0xa, 0x6} > > +#define CONFIG_MII > > +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN > > +#else > > #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 > > only */ +#define CONFIG_EGIGA0_PHY 0x8 > > +#endif > > #define CONFIG_NETCONSOLE > > #endif > > > > @@ -154,11 +179,20 @@ > > /* > > * Environment variables configurations > > */ > > + > > +#if defined(CONFIG_WIRELESS_SPACE) > > +#define CONFIG_ENV_IS_IN_NAND > > +#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64KB > > */ +#define CONFIG_ENV_SIZE 0x1000 /* > > 4KB */ +#define CONFIG_ENV_ADDR 0x70000 > > +#define CONFIG_ENV_OFFSET 0x70000 /* env > > starts here */ +#else > > #define CONFIG_ENV_IS_IN_SPI_FLASH > > #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64KB > > */ #define CONFIG_ENV_SIZE 0x1000 /* > > 4KB */ #define CONFIG_ENV_ADDR 0x70000 > > #define CONFIG_ENV_OFFSET 0x70000 /* env > > starts here */ +#endif > > > > /* > > * Default environment variables > > @@ -185,4 +219,6 @@ > > "usbload=usb start && > > " \ "fatload usb 0:1 > > $loadaddr /boot/$bootfile\0" > > > > +//#define DEBUG > > Either remove it or make it c-style comments. ... oops... I'll remove this. > Regards... > Prafulla . . . Thanks for the review. I'll also copy Sion Guinot (maintainer for the whole lacie_kw boards) in V2. Amicalement,
On Thu, Aug 16, 2012 at 08:08:34PM +0200, Albert ARIBAUD wrote: > Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> [snip] > @@ -90,8 +100,14 @@ > #define CONFIG_SYS_IDE_MAXDEVICE 1 > #if defined(CONFIG_NET2BIG_V2) > #define CONFIG_SYS_PROMPT "2big2> " > -#else > +#elif defined(CONFIG_NETSPACE_V2) > #define CONFIG_SYS_PROMPT "ns2> " > +#elif defined(CONFIG_INETSPACE_V2) > +#define CONFIG_SYS_PROMPT "is2> " > +#elif defined(CONFIG_WIRELESS_SPACE) > +#define CONFIG_SYS_PROMPT "ws> " > +#else > +#define CONFIG_SYS_PROMPT "lacie-kw> " Is this really a good thing? Over here I've been trying / hoping to get everyone to just use 'U-Boot # ' as the prompt as this makes automated testing easier and there's other run-time ways to see what we're on.
Hi Tom, On Fri, 17 Aug 2012 10:55:38 -0700, Tom Rini <trini@ti.com> wrote: > On Thu, Aug 16, 2012 at 08:08:34PM +0200, Albert ARIBAUD wrote: > > > Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> > [snip] > > @@ -90,8 +100,14 @@ > > #define CONFIG_SYS_IDE_MAXDEVICE 1 > > #if defined(CONFIG_NET2BIG_V2) > > #define CONFIG_SYS_PROMPT "2big2> " > > -#else > > +#elif defined(CONFIG_NETSPACE_V2) > > #define CONFIG_SYS_PROMPT "ns2> " > > +#elif defined(CONFIG_INETSPACE_V2) > > +#define CONFIG_SYS_PROMPT "is2> " > > +#elif defined(CONFIG_WIRELESS_SPACE) > > +#define CONFIG_SYS_PROMPT "ws> " > > +#else > > +#define CONFIG_SYS_PROMPT "lacie-kw> " > > Is this really a good thing? Over here I've been trying / hoping to > get everyone to just use 'U-Boot # ' as the prompt as this makes > automated testing easier and there's other run-time ways to see what > we're on. I quite like prompts that identify the board I'm on, but it's not a must either. Cc:ing Simon in cas his own patches re lacie_kw would be impacted by your suggestion. Amicalement,
> -----Original Message----- > From: u-boot-bounces@lists.denx.de [mailto:u-boot- > bounces@lists.denx.de] On Behalf Of Albert ARIBAUD > Sent: 18 August 2012 02:59 > To: Tom Rini > Cc: u-boot@lists.denx.de > Subject: Re: [U-Boot] [PATCH] ARM: lacie_kw: add support for > WIRELESS_SPACE > > Hi Tom, > > On Fri, 17 Aug 2012 10:55:38 -0700, Tom Rini <trini@ti.com> wrote: > > > On Thu, Aug 16, 2012 at 08:08:34PM +0200, Albert ARIBAUD wrote: > > > > > Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> > > [snip] > > > @@ -90,8 +100,14 @@ > > > #define CONFIG_SYS_IDE_MAXDEVICE 1 > > > #if defined(CONFIG_NET2BIG_V2) > > > #define CONFIG_SYS_PROMPT "2big2> " > > > -#else > > > +#elif defined(CONFIG_NETSPACE_V2) > > > #define CONFIG_SYS_PROMPT "ns2> " > > > +#elif defined(CONFIG_INETSPACE_V2) > > > +#define CONFIG_SYS_PROMPT "is2> " > > > +#elif defined(CONFIG_WIRELESS_SPACE) > > > +#define CONFIG_SYS_PROMPT "ws> " > > > +#else > > > +#define CONFIG_SYS_PROMPT "lacie-kw> " > > > > Is this really a good thing? Over here I've been trying / hoping to > > get everyone to just use 'U-Boot # ' as the prompt as this makes > > automated testing easier and there's other run-time ways to see what > > we're on. I personally vote to have common boot prompt 'U-boot #'. > > I quite like prompts that identify the board I'm on, but it's not a > must either. Cc:ing Simon in cas his own patches re lacie_kw would be > impacted by your suggestion. Well, we can expose a command to detect/print the board info, if needed. Regards... Prafulla . . .
On Tue, Aug 21, 2012 at 12:16:40AM -0700, Prafulla Wadaskar wrote: > > > > -----Original Message----- > > From: u-boot-bounces@lists.denx.de [mailto:u-boot- > > bounces@lists.denx.de] On Behalf Of Albert ARIBAUD > > Sent: 18 August 2012 02:59 > > To: Tom Rini > > Cc: u-boot@lists.denx.de > > Subject: Re: [U-Boot] [PATCH] ARM: lacie_kw: add support for > > WIRELESS_SPACE > > > > Hi Tom, > > > > On Fri, 17 Aug 2012 10:55:38 -0700, Tom Rini <trini@ti.com> wrote: > > > > > On Thu, Aug 16, 2012 at 08:08:34PM +0200, Albert ARIBAUD wrote: > > > > > > > Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> > > > [snip] > > > > @@ -90,8 +100,14 @@ > > > > #define CONFIG_SYS_IDE_MAXDEVICE 1 > > > > #if defined(CONFIG_NET2BIG_V2) > > > > #define CONFIG_SYS_PROMPT "2big2> " > > > > -#else > > > > +#elif defined(CONFIG_NETSPACE_V2) > > > > #define CONFIG_SYS_PROMPT "ns2> " > > > > +#elif defined(CONFIG_INETSPACE_V2) > > > > +#define CONFIG_SYS_PROMPT "is2> " > > > > +#elif defined(CONFIG_WIRELESS_SPACE) > > > > +#define CONFIG_SYS_PROMPT "ws> " > > > > +#else > > > > +#define CONFIG_SYS_PROMPT "lacie-kw> " > > > > > > Is this really a good thing? Over here I've been trying / hoping to > > > get everyone to just use 'U-Boot # ' as the prompt as this makes > > > automated testing easier and there's other run-time ways to see what > > > we're on. > > I personally vote to have common boot prompt 'U-boot #'. > > > > > I quite like prompts that identify the board I'm on, but it's not a > > must either. Cc:ing Simon in cas his own patches re lacie_kw would be > > impacted by your suggestion. > > Well, we can expose a command to detect/print the board info, if needed. The run-time command "version" already returns both the system and the machine informations. This command can be used for testing purposes. IMHO the only requirement for an U-Boot prompt is to be short enough. Everything else is a matter of taste. Mine goes for the machine name. Regards, Simon
Hi Simon, On Wed, 22 Aug 2012 17:16:21 +0200, Simon Guinot <simon.guinot@sequanux.org> wrote: > On Tue, Aug 21, 2012 at 12:16:40AM -0700, Prafulla Wadaskar wrote: > > > > > > > -----Original Message----- > > > From: u-boot-bounces@lists.denx.de [mailto:u-boot- > > > bounces@lists.denx.de] On Behalf Of Albert ARIBAUD > > > Sent: 18 August 2012 02:59 > > > To: Tom Rini > > > Cc: u-boot@lists.denx.de > > > Subject: Re: [U-Boot] [PATCH] ARM: lacie_kw: add support for > > > WIRELESS_SPACE > > > > > > Hi Tom, > > > > > > On Fri, 17 Aug 2012 10:55:38 -0700, Tom Rini <trini@ti.com> wrote: > > > > > > > On Thu, Aug 16, 2012 at 08:08:34PM +0200, Albert ARIBAUD wrote: > > > > > > > > > Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> > > > > [snip] > > > > > @@ -90,8 +100,14 @@ > > > > > #define CONFIG_SYS_IDE_MAXDEVICE 1 > > > > > #if defined(CONFIG_NET2BIG_V2) > > > > > #define CONFIG_SYS_PROMPT "2big2> " > > > > > -#else > > > > > +#elif defined(CONFIG_NETSPACE_V2) > > > > > #define CONFIG_SYS_PROMPT "ns2> " > > > > > +#elif defined(CONFIG_INETSPACE_V2) > > > > > +#define CONFIG_SYS_PROMPT "is2> " > > > > > +#elif defined(CONFIG_WIRELESS_SPACE) > > > > > +#define CONFIG_SYS_PROMPT "ws> " > > > > > +#else > > > > > +#define CONFIG_SYS_PROMPT "lacie-kw> " > > > > > > > > Is this really a good thing? Over here I've been trying / > > > > hoping to get everyone to just use 'U-Boot # ' as the prompt as > > > > this makes automated testing easier and there's other run-time > > > > ways to see what we're on. > > > > I personally vote to have common boot prompt 'U-boot #'. > > > > > > > > I quite like prompts that identify the board I'm on, but it's not > > > a must either. Cc:ing Simon in cas his own patches re lacie_kw > > > would be impacted by your suggestion. > > > > Well, we can expose a command to detect/print the board info, if > > needed. > > The run-time command "version" already returns both the system and the > machine informations. This command can be used for testing purposes. > IMHO the only requirement for an U-Boot prompt is to be short enough. > Everything else is a matter of taste. Mine goes for the machine name. > > Regards, > > Simon Tom, Can automated test cope with a general prompt of the form '.*#' ? Amicalement,
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 09/22/12 01:51, Albert ARIBAUD wrote: > Hi Simon, > > On Wed, 22 Aug 2012 17:16:21 +0200, Simon Guinot > <simon.guinot@sequanux.org> wrote: > >> On Tue, Aug 21, 2012 at 12:16:40AM -0700, Prafulla Wadaskar >> wrote: >>> >>> >>>> -----Original Message----- From: u-boot-bounces@lists.denx.de >>>> [mailto:u-boot- bounces@lists.denx.de] On Behalf Of Albert >>>> ARIBAUD Sent: 18 August 2012 02:59 To: Tom Rini Cc: >>>> u-boot@lists.denx.de Subject: Re: [U-Boot] [PATCH] ARM: >>>> lacie_kw: add support for WIRELESS_SPACE >>>> >>>> Hi Tom, >>>> >>>> On Fri, 17 Aug 2012 10:55:38 -0700, Tom Rini <trini@ti.com> >>>> wrote: >>>> >>>>> On Thu, Aug 16, 2012 at 08:08:34PM +0200, Albert ARIBAUD >>>>> wrote: >>>>> >>>>>> Signed-off-by: Albert ARIBAUD >>>>>> <albert.u.boot@aribaud.net> >>>>> [snip] >>>>>> @@ -90,8 +100,14 @@ #define CONFIG_SYS_IDE_MAXDEVICE >>>>>> 1 #if defined(CONFIG_NET2BIG_V2) #define >>>>>> CONFIG_SYS_PROMPT "2big2> " -#else +#elif >>>>>> defined(CONFIG_NETSPACE_V2) #define CONFIG_SYS_PROMPT >>>>>> "ns2> " +#elif defined(CONFIG_INETSPACE_V2) +#define >>>>>> CONFIG_SYS_PROMPT "is2> " +#elif >>>>>> defined(CONFIG_WIRELESS_SPACE) +#define CONFIG_SYS_PROMPT >>>>>> "ws> " +#else +#define CONFIG_SYS_PROMPT "lacie-kw> " >>>>> >>>>> Is this really a good thing? Over here I've been trying / >>>>> hoping to get everyone to just use 'U-Boot # ' as the >>>>> prompt as this makes automated testing easier and there's >>>>> other run-time ways to see what we're on. >>> >>> I personally vote to have common boot prompt 'U-boot #'. >>> >>>> >>>> I quite like prompts that identify the board I'm on, but it's >>>> not a must either. Cc:ing Simon in cas his own patches re >>>> lacie_kw would be impacted by your suggestion. >>> >>> Well, we can expose a command to detect/print the board info, >>> if needed. >> >> The run-time command "version" already returns both the system >> and the machine informations. This command can be used for >> testing purposes. IMHO the only requirement for an U-Boot prompt >> is to be short enough. Everything else is a matter of taste. Mine >> goes for the machine name. >> >> Regards, >> >> Simon > > Tom, > > Can automated test cope with a general prompt of the form '.*#' ? Sure, probably. It's really just something that popped into my head rather than a hard requirement or anything. It's also possible to just setup your testing framework to take the prompt as a variable, so this is just a personal preference thing. - -- Tom -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://www.enigmail.net/ iQIcBAEBAgAGBQJQXfeOAAoJENk4IS6UOR1W0tUP/RIANji/ltjv29q/64C7Q6Vo JreBmUcXI3BcUF13WIH8SVwW80DG0J29Pa2k2t9X+UxvXwXvv2eJCdEk5Pq6Fu4u ksHS58kca/ufA5Rb+6JlvlCbLwet9kfyyk+4At5D4DfFnAX0XqbhfbkaA5Qay+U5 fccb9R8bY+HD3A5euKKLMZDP3bKij9293yJIOuaD6BIw8qVSkcy+a4Zgm4PvlPsx b6W04IGW1w1NEArej2gpDutawDGfTulFpfFzNnR1a4BnxyII+VzZxuIMdbyc7MLc /nbeSynRh35af892Xuzx6NCtpASYvN776BGws0kNLcR699pA0BcMRSCVaOKVpF3P wMkx6bUXQQ0FsvLy5OD5yJt2xSNLSxbIAV/ZiU3GsZ4AbWrmKhax53+XRcWmasPa HyhozQ0/lMaSkK4KOu6LHmRSHrSSEsUmJnVzyjWm7BOb+IY0WHntq47A+T8QoMuF foed5J0ON5XRHDzbzk34pPBdfg+qCIc4+PQ2XsiRYJe+T3DNOCZgOwByzo0sasRh EC53I2Q95fQsafhgSs0EVCw0nJIa1z0uWEnQIH0K6gyffkNGyj1UPkLPf+qva+t0 GJXqwkgRfvjO/MQIN+SFn6flMKfxgobqztcDck5tvS+8s5mMZtsoy24F6jW/znXo 2Cqs4OFBzE5Efbv1PWcC =DhtF -----END PGP SIGNATURE-----
Hi Tom, On Sat, 22 Sep 2012 10:38:22 -0700, Tom Rini <trini@TI.com> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On 09/22/12 01:51, Albert ARIBAUD wrote: > > Hi Simon, > > > > On Wed, 22 Aug 2012 17:16:21 +0200, Simon Guinot > > <simon.guinot@sequanux.org> wrote: > > > >> On Tue, Aug 21, 2012 at 12:16:40AM -0700, Prafulla Wadaskar > >> wrote: > >>> > >>> > >>>> -----Original Message----- From: u-boot-bounces@lists.denx.de > >>>> [mailto:u-boot- bounces@lists.denx.de] On Behalf Of Albert > >>>> ARIBAUD Sent: 18 August 2012 02:59 To: Tom Rini Cc: > >>>> u-boot@lists.denx.de Subject: Re: [U-Boot] [PATCH] ARM: > >>>> lacie_kw: add support for WIRELESS_SPACE > >>>> > >>>> Hi Tom, > >>>> > >>>> On Fri, 17 Aug 2012 10:55:38 -0700, Tom Rini <trini@ti.com> > >>>> wrote: > >>>> > >>>>> On Thu, Aug 16, 2012 at 08:08:34PM +0200, Albert ARIBAUD > >>>>> wrote: > >>>>> > >>>>>> Signed-off-by: Albert ARIBAUD > >>>>>> <albert.u.boot@aribaud.net> > >>>>> [snip] > >>>>>> @@ -90,8 +100,14 @@ #define CONFIG_SYS_IDE_MAXDEVICE > >>>>>> 1 #if defined(CONFIG_NET2BIG_V2) #define > >>>>>> CONFIG_SYS_PROMPT "2big2> " -#else +#elif > >>>>>> defined(CONFIG_NETSPACE_V2) #define CONFIG_SYS_PROMPT > >>>>>> "ns2> " +#elif defined(CONFIG_INETSPACE_V2) +#define > >>>>>> CONFIG_SYS_PROMPT "is2> " +#elif > >>>>>> defined(CONFIG_WIRELESS_SPACE) +#define CONFIG_SYS_PROMPT > >>>>>> "ws> " +#else +#define CONFIG_SYS_PROMPT "lacie-kw> " > >>>>> > >>>>> Is this really a good thing? Over here I've been trying / > >>>>> hoping to get everyone to just use 'U-Boot # ' as the > >>>>> prompt as this makes automated testing easier and there's > >>>>> other run-time ways to see what we're on. > >>> > >>> I personally vote to have common boot prompt 'U-boot #'. > >>> > >>>> > >>>> I quite like prompts that identify the board I'm on, but it's > >>>> not a must either. Cc:ing Simon in cas his own patches re > >>>> lacie_kw would be impacted by your suggestion. > >>> > >>> Well, we can expose a command to detect/print the board info, > >>> if needed. > >> > >> The run-time command "version" already returns both the system > >> and the machine informations. This command can be used for > >> testing purposes. IMHO the only requirement for an U-Boot prompt > >> is to be short enough. Everything else is a matter of taste. Mine > >> goes for the machine name. > >> > >> Regards, > >> > >> Simon > > > > Tom, > > > > Can automated test cope with a general prompt of the form '.*#' ? > > Sure, probably. It's really just something that popped into my head > rather than a hard requirement or anything. It's also possible to > just setup your testing framework to take the prompt as a variable, so > this is just a personal preference thing. Ok, then, prompts will stay as they are in the patch. BTW, I took a look at prompts across the whole codebase... You get all sorts. :) Amicalement,
diff --git a/board/LaCie/netspace_v2/netspace_v2.c b/board/LaCie/netspace_v2/netspace_v2.c index 68e8a77..084f0cf 100644 --- a/board/LaCie/netspace_v2/netspace_v2.c +++ b/board/LaCie/netspace_v2/netspace_v2.c @@ -39,40 +39,7 @@ int board_early_init_f(void) NETSPACE_V2_OE_LOW, NETSPACE_V2_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Fan speed (bit 1) */ - MPP8_TW_SDA, - MPP9_TW_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_GPO, /* Red led */ - MPP14_GPIO, /* USB fuse */ - MPP16_GPIO, /* SATA 0 power */ - MPP17_GPIO, /* SATA 1 power */ - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP22_GPIO, /* Fan speed (bit 0) */ - MPP23_GPIO, /* Fan power */ - MPP24_GPIO, /* USB mode select */ - MPP25_GPIO, /* Fan rotation fail */ - MPP26_GPIO, /* USB vbus-in detection */ - MPP28_GPIO, /* USB enable vbus-out */ - MPP29_GPIO, /* Blue led (slow register) */ - MPP30_GPIO, /* Blue led (command register) */ - MPP31_GPIO, /* Board power off */ - MPP32_GPIO, /* Button (0 = Released, 1 = Pushed) */ - MPP33_GPIO, /* Fan speed (bit 2) */ - 0 - }; + u32 kwmpp_config[] = NETSPACE_V2_MPP_CONFIG; kirkwood_mpp_conf(kwmpp_config, NULL); return 0; @@ -107,7 +74,12 @@ int misc_init_r(void) /* Configure and initialize PHY */ void reset_phy(void) { - mv_phy_88e1116_init("egiga0", 8); +#ifdef CONFIG_EGIGA0_PHY + mv_phy_88e1116_init("egiga0", CONFIG_EGIGA0_PHY); +#endif +#ifdef CONFIG_EGIGA1_PHY + mv_phy_88e1116_init("egiga1", CONFIG_EGIGA1_PHY); +#endif } #endif diff --git a/board/LaCie/netspace_v2/netspace_v2.h b/board/LaCie/netspace_v2/netspace_v2.h index 34e492c..fc1d571 100644 --- a/board/LaCie/netspace_v2/netspace_v2.h +++ b/board/LaCie/netspace_v2/netspace_v2.h @@ -24,11 +24,132 @@ #define NETSPACE_V2_H /* GPIO configuration */ + +/* Net Space V2, Net Space Max V2, Internet Space V2: */ +#if defined(CONFIG_NETSPACE_MAX_V2) \ + || defined(CONFIG_NETSPACE_V2) \ + || defined(CONFIG_NET2BIG_V2) \ + || defined(CONFIG_INETSPACE_V2) + #define NETSPACE_V2_OE_LOW 0x06004000 #define NETSPACE_V2_OE_HIGH 0x00000031 #define NETSPACE_V2_OE_VAL_LOW 0x10030000 #define NETSPACE_V2_OE_VAL_HIGH 0x00000000 +/* Wireless Space */ + +#elif defined(CONFIG_WIRELESS_SPACE) + +#define NETSPACE_V2_OE_LOW 0xFF006808 +#define NETSPACE_V2_OE_HIGH 0x0000F989 +#define NETSPACE_V2_OE_VAL_LOW 0x00000000 +#define NETSPACE_V2_OE_VAL_HIGH 0x00000000 + +#else + +#error Undefined or unsupported LaCie KW board variant + +#endif + #define NETSPACE_V2_GPIO_BUTTON 32 +/* MPP configuration */ + +/* Net Space V2, Net Space Max V2, Internet Space V2: */ +#if defined(CONFIG_NETSPACE_MAX_V2) \ + || defined(CONFIG_NETSPACE_V2) \ + || defined(CONFIG_NET2BIG_V2) \ + || defined(CONFIG_INETSPACE_V2) + +#define NETSPACE_V2_MPP_CONFIG { \ + MPP0_SPI_SCn, \ + MPP1_SPI_MOSI, \ + MPP2_SPI_SCK, \ + MPP3_SPI_MISO, \ + MPP4_NF_IO6, \ + MPP5_NF_IO7, \ + MPP6_SYSRST_OUTn, \ + MPP7_GPO, /* Fan speed (bit 1) */ \ + MPP8_TW_SDA, \ + MPP9_TW_SCK, \ + MPP10_UART0_TXD, \ + MPP11_UART0_RXD, \ + MPP12_GPO, /* Red led */ \ + MPP14_GPIO, /* USB fuse */ \ + MPP16_GPIO, /* SATA 0 power */ \ + MPP17_GPIO, /* SATA 1 power */ \ + MPP18_NF_IO0, \ + MPP19_NF_IO1, \ + MPP20_SATA1_ACTn, \ + MPP21_SATA0_ACTn, \ + MPP22_GPIO, /* Fan speed (bit 0) */ \ + MPP23_GPIO, /* Fan power */ \ + MPP24_GPIO, /* USB mode select */ \ + MPP25_GPIO, /* Fan rotation fail */ \ + MPP26_GPIO, /* USB vbus-in detection */ \ + MPP28_GPIO, /* USB enable vbus-out */ \ + MPP29_GPIO, /* Blue led (slow register) */ \ + MPP30_GPIO, /* Blue led (command register) */ \ + MPP31_GPIO, /* Board power off */ \ + MPP32_GPIO, /* Button (0 = Released, 1 = Pushed) */ \ + MPP33_GPIO, /* Fan speed (bit 2) */ \ + 0 \ + } + +#elif defined(CONFIG_WIRELESS_SPACE) + +#define NETSPACE_V2_MPP_CONFIG { \ + MPP0_NF_IO2, \ + MPP1_NF_IO3, \ + MPP2_NF_IO4, \ + MPP3_NF_IO5, \ + MPP4_NF_IO6, \ + MPP5_NF_IO7, \ + MPP6_SYSRST_OUTn, \ + MPP7_GPO, /* Fan speed (bit 1) */ \ + MPP8_TW_SDA, \ + MPP9_TW_SCK, \ + MPP10_UART0_TXD, \ + MPP11_UART0_RXD, \ + MPP13_GPIO, /* Red led */ \ + MPP14_GPIO, /* USB fuse */ \ + MPP15_SATA0_ACTn, \ + MPP16_GPIO, /* SATA 0 power */ \ + MPP17_GPIO, /* SATA 1 power */ \ + MPP18_NF_IO0, \ + MPP19_NF_IO1, \ + MPP20_GE1_0, /* Gigabit Ethernet 1 */ \ + MPP21_GE1_1, \ + MPP22_GE1_2, \ + MPP23_GE1_3, \ + MPP24_GE1_4, \ + MPP25_GE1_5, \ + MPP26_GE1_6, \ + MPP27_GE1_7, \ + MPP28_GE1_8, \ + MPP29_GE1_9, \ + MPP30_GE1_10, \ + MPP31_GE1_11, \ + MPP32_GE1_12, \ + MPP33_GE1_13, \ + MPP34_GE1_14, \ + MPP35_GE1_15, \ + MPP36_GPIO, /* Fan speed (bit 2) */ \ + MPP37_GPIO, /* Fan speed (bit 0) */ \ + MPP38_GPIO, /* Fan power */ \ + MPP39_GPIO, /* Fan rotation fail */ \ + MPP40_GPIO, /* Ethernet switch link */ \ + MPP41_GPIO, /* USB enable host vbus */ \ + MPP42_GPIO, /* LED clock control */ \ + MPP43_GPIO, /* WPS button (0 = Pushed, 1 = Released) */ \ + MPP44_GPIO, /* Red LED on/off */ \ + MPP45_GPIO, /* Red LED timer blink (on=100ms, off=100ms) */ \ + MPP46_GPIO, /* Green LED on/off */ \ + MPP47_GPIO, /* LED (blue, green) SATA activity blink */ \ + MPP48_GPIO, /* Blue LED on/off */ \ + 0 \ + } + +#endif + #endif /* NETSPACE_V2_H */ diff --git a/boards.cfg b/boards.cfg index edd750c..f001b29 100644 --- a/boards.cfg +++ b/boards.cfg @@ -157,6 +157,7 @@ inetspace_v2 arm arm926ejs netspace_v2 LaCie net2big_v2 arm arm926ejs net2big_v2 LaCie kirkwood lacie_kw:NET2BIG_V2 netspace_max_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MAX_V2 netspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_V2 +wireless_space arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:WIRELESS_SPACE dreamplug arm arm926ejs - Marvell kirkwood guruplug arm arm926ejs - Marvell kirkwood mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c index 47bf27c..670edb0 100644 --- a/drivers/net/mvgbe.c +++ b/drivers/net/mvgbe.c @@ -653,6 +653,14 @@ int mvgbe_initialize(bd_t *bis) struct eth_device *dev; int devnum; u8 used_ports[MAX_MVGBE_DEVS] = CONFIG_MVGBE_PORTS; +#if defined(CONFIG_MVGBE_PHY_ADRS) +#define MVGBE_PHY_ADRS CONFIG_MVGBE_PHY_ADRS +#elif defined(CONFIG_PHY_BASE_ADR) +#define MVGBE_PHY_ADRS {CONFIG_PHY_BASE_ADR,CONFIG_PHY_BASE_ADR+1} +#else +#define MVGBE_PHY_ADRS {8,9} +#endif + u8 used_phy_adrs[MAX_MVGBE_DEVS] = MVGBE_PHY_ADRS; for (devnum = 0; devnum < MAX_MVGBE_DEVS; devnum++) { /*skip if port is configured not to use */ @@ -733,7 +741,7 @@ error1: miiphy_register(dev->name, smi_reg_read, smi_reg_write); /* Set phy address of the port */ miiphy_write(dev->name, MV_PHY_ADR_REQUEST, - MV_PHY_ADR_REQUEST, PHY_BASE_ADR + devnum); + MV_PHY_ADR_REQUEST, used_phy_adrs[devnum]); #endif } return 0; diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index c35c2db..a979ab4 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -33,6 +33,10 @@ #elif defined(CONFIG_NET2BIG_V2) #define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2 #define CONFIG_IDENT_STRING " 2Big v2" +#elif defined(CONFIG_WIRELESS_SPACE) +#define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in mach-types.h */ +#define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE +#define CONFIG_IDENT_STRING " Wireless Space" #else #error "Unknown board" #endif @@ -73,6 +77,12 @@ #define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-is2.cfg #endif +#ifdef CONFIG_WIRELESS_SPACE +/* No SPI but NAND */ +#undef CONFIG_CMD_SF +#define CONFIG_CMD_NAND +#endif + /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros @@ -90,8 +100,14 @@ #define CONFIG_SYS_IDE_MAXDEVICE 1 #if defined(CONFIG_NET2BIG_V2) #define CONFIG_SYS_PROMPT "2big2> " -#else +#elif defined(CONFIG_NETSPACE_V2) #define CONFIG_SYS_PROMPT "ns2> " +#elif defined(CONFIG_INETSPACE_V2) +#define CONFIG_SYS_PROMPT "is2> " +#elif defined(CONFIG_WIRELESS_SPACE) +#define CONFIG_SYS_PROMPT "ws> " +#else +#define CONFIG_SYS_PROMPT "lacie-kw> " #endif /* @@ -99,7 +115,16 @@ */ #ifdef CONFIG_CMD_NET #define CONFIG_MISC_INIT_R /* Call misc_init_r() to initialize MAC address */ +#if defined(CONFIG_WIRELESS_SPACE) +#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports only */ +#define CONFIG_EGIGA1_PHY 0x6 /* egiga1 has a PHY, egiga0 has NOT */ +#define CONFIG_MVGBE_PHY_ADRS {0xa, 0x6} +#define CONFIG_MII +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN +#else #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ +#define CONFIG_EGIGA0_PHY 0x8 +#endif #define CONFIG_NETCONSOLE #endif @@ -154,11 +179,20 @@ /* * Environment variables configurations */ + +#if defined(CONFIG_WIRELESS_SPACE) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64KB */ +#define CONFIG_ENV_SIZE 0x1000 /* 4KB */ +#define CONFIG_ENV_ADDR 0x70000 +#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ +#else #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64KB */ #define CONFIG_ENV_SIZE 0x1000 /* 4KB */ #define CONFIG_ENV_ADDR 0x70000 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ +#endif /* * Default environment variables @@ -185,4 +219,6 @@ "usbload=usb start && " \ "fatload usb 0:1 $loadaddr /boot/$bootfile\0" +//#define DEBUG + #endif /* _CONFIG_LACIE_KW_H */
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> --- This patch adds the Wireless Space to the lacie_kw sub-targets. It *should* not change a thing to the already existing sub-targets (except that each one gets its own prompt). Owners of NETSPACE_[MAX]_V2, INETSPACE_V2, NET2BIG_V2 please test. board/LaCie/netspace_v2/netspace_v2.c | 42 ++---------- board/LaCie/netspace_v2/netspace_v2.h | 121 +++++++++++++++++++++++++++++++++ boards.cfg | 1 + drivers/net/mvgbe.c | 10 ++- include/configs/lacie_kw.h | 38 ++++++++++- 5 files changed, 175 insertions(+), 37 deletions(-)