diff mbox

[U-Boot] image/FIT: Add ramdisk load, entry address and OS tag inclusion

Message ID 1343462542-1556-2-git-send-email-jagan@techved.org
State Accepted
Commit cee84e82576e00fb18b0134712ee8686bab36eaa
Headers show

Commit Message

402jagan@gmail.com July 28, 2012, 8:02 a.m. UTC 
From: Jagannadha Sutradharudu Teki <402jagan@gmail.com>

This patch adds support to include Load, Entry address and OS tag
of ramdisk on to FIT image through mkimage tool.

Signed-off-by: Jagannadha Sutradharudu Teki <402jagan@gmail.com>
---
 common/image.c |    7 ++++---
 1 files changed, 4 insertions(+), 3 deletions(-)

Comments

402jagan@gmail.com Aug. 2, 2012, 5:27 p.m. UTC | #1 
Any point to consider this..or we have any solution that may not require
this change?

Regards,
Jagan.

On Sat, Jul 28, 2012 at 1:32 PM, Jagan <402jagan@gmail.com> wrote:

> From: Jagannadha Sutradharudu Teki <402jagan@gmail.com>
>
> This patch adds support to include Load, Entry address and OS tag
> of ramdisk on to FIT image through mkimage tool.
>
> Signed-off-by: Jagannadha Sutradharudu Teki <402jagan@gmail.com>
> ---
>  common/image.c |    7 ++++---
>  1 files changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/common/image.c b/common/image.c
> index 91954ac..70a112d 100644
> --- a/common/image.c
> +++ b/common/image.c
> @@ -2042,13 +2042,13 @@ void fit_image_print(const void *fit, int
> image_noffset, const char *p)
>                 printf("%s  Architecture: %s\n", p,
> genimg_get_arch_name(arch));
>         }
>
> -       if (type == IH_TYPE_KERNEL) {
> +       if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_RAMDISK)) {
>                 fit_image_get_os(fit, image_noffset, &os);
>                 printf("%s  OS:           %s\n", p,
> genimg_get_os_name(os));
>         }
>
>         if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
> -               (type == IH_TYPE_FIRMWARE)) {
> +               (type == IH_TYPE_FIRMWARE) || (type == IH_TYPE_RAMDISK)) {
>                 ret = fit_image_get_load(fit, image_noffset, &load);
>                 printf("%s  Load Address: ", p);
>                 if (ret)
> @@ -2057,7 +2057,8 @@ void fit_image_print(const void *fit, int
> image_noffset, const char *p)
>                         printf("0x%08lx\n", load);
>         }
>
> -       if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE)) {
> +       if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
> +               (type == IH_TYPE_RAMDISK)) {
>                 fit_image_get_entry(fit, image_noffset, &entry);
>                 printf("%s  Entry Point:  ", p);
>                 if (ret)
> --
> 1.7.0.4
>
>
Wolfgang Denk Sept. 2, 2012, 3:39 p.m. UTC | #2 
Dear Jagan,

In message <1343462542-1556-2-git-send-email-jagan@techved.org> you wrote:
> From: Jagannadha Sutradharudu Teki <402jagan@gmail.com>
> 
> This patch adds support to include Load, Entry address and OS tag
> of ramdisk on to FIT image through mkimage tool.
> 
> Signed-off-by: Jagannadha Sutradharudu Teki <402jagan@gmail.com>
> ---
>  common/image.c |    7 ++++---
>  1 files changed, 4 insertions(+), 3 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk
diff mbox

Patch

diff --git a/common/image.c b/common/image.c
index 91954ac..70a112d 100644
--- a/common/image.c
+++ b/common/image.c
@@ -2042,13 +2042,13 @@  void fit_image_print(const void *fit, int image_noffset, const char *p)
 		printf("%s  Architecture: %s\n", p, genimg_get_arch_name(arch));
 	}
 
-	if (type == IH_TYPE_KERNEL) {
+	if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_RAMDISK)) {
 		fit_image_get_os(fit, image_noffset, &os);
 		printf("%s  OS:           %s\n", p, genimg_get_os_name(os));
 	}
 
 	if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
-		(type == IH_TYPE_FIRMWARE)) {
+		(type == IH_TYPE_FIRMWARE) || (type == IH_TYPE_RAMDISK)) {
 		ret = fit_image_get_load(fit, image_noffset, &load);
 		printf("%s  Load Address: ", p);
 		if (ret)
@@ -2057,7 +2057,8 @@  void fit_image_print(const void *fit, int image_noffset, const char *p)
 			printf("0x%08lx\n", load);
 	}
 
-	if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE)) {
+	if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
+		(type == IH_TYPE_RAMDISK)) {
 		fit_image_get_entry(fit, image_noffset, &entry);
 		printf("%s  Entry Point:  ", p);
 		if (ret)