diff mbox

[U-Boot] ehci-atmel: fix compiler warning

Message ID 1340887837-3073-1-git-send-email-andreas.devel@googlemail.com
State Accepted, archived
Commit 81f40345d1d5c5ba04620873e3ca0bc60b6b2fe0
Delegated to: Andreas Bießmann
Headers show

Commit Message

Andreas Bießmann June 28, 2012, 12:50 p.m. UTC
Commit f61483c539439d32278faec62753811734737cce intoduced following warning:
---8<---
ehci-atmel.c: In function 'ehci_hcd_init':
ehci-atmel.c:49:2: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses]
ehci-atmel.c: In function 'ehci_hcd_stop':
ehci-atmel.c:79:2: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses]
--->8---

This patch fixes it.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
cc: Bo Shen <voice.shen@atmel.com>
cc: Marek Vasut <marex@denx.de>
---
I'm really sorry, should have run the compile check before submission.
This warning was introduced in v3, it was not there in v2. Maybe there was a
misunderstanding between you Marek and you Bo. I will apply this patch
immidiately.

Best regards

Andreas Bießmann

 drivers/usb/host/ehci-atmel.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 532db22..15b9b60 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -46,7 +46,7 @@  int ehci_hcd_init(void)
 	start_time = get_timer(0);
 	/* Enable UTMI PLL */
 	writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr);
-	while (readl(&pmc->sr) & AT91_PMC_LOCKU != AT91_PMC_LOCKU) {
+	while ((readl(&pmc->sr) & AT91_PMC_LOCKU) != AT91_PMC_LOCKU) {
 		WATCHDOG_RESET();
 		tmp_time = get_timer(0);
 		if ((tmp_time - start_time) > EN_UPLL_TIMEOUT) {
@@ -76,7 +76,7 @@  int ehci_hcd_stop(void)
 	start_time = get_timer(0);
 	/* Disable UTMI PLL */
 	writel(readl(&pmc->uckr) & ~AT91_PMC_UPLLEN, &pmc->uckr);
-	while (readl(&pmc->sr) & AT91_PMC_LOCKU == AT91_PMC_LOCKU) {
+	while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU) {
 		WATCHDOG_RESET();
 		tmp_time = get_timer(0);
 		if ((tmp_time - start_time) > EN_UPLL_TIMEOUT) {