@@ -255,6 +255,27 @@ void imx_get_mac_from_fuse(char *mac)
}
#endif
+#define HW_DIGCTRL_SCRATCH0 0x8001c280
+#define HW_DIGCTRL_SCRATCH1 0x8001c290
+int mx28_dram_init(void)
+{
+ uint32_t sz[2];
+
+ sz[0] = readl(HW_DIGCTRL_SCRATCH0);
+ sz[1] = readl(HW_DIGCTRL_SCRATCH1);
+
+ if (sz[0] != sz[1]) {
+ puts("MX28:\n"
+ "Error, the RAM size in HW_DIGCTRL_SCRATCH0 and\n"
+ "HW_DIGCTRL_SCRATCH1 is not the same. Please\n"
+ "verify these two registers contain valid RAM size\n");
+ hang();
+ }
+
+ gd->ram_size = sz[0];
+ return 0;
+}
+
U_BOOT_CMD(
clocks, CONFIG_SYS_MAXARGS, 1, do_mx28_showclocks,
"display clocks",
@@ -36,5 +36,6 @@ void mx28_common_spl_init(const iomux_cfg_t *iomux_setup,
#endif
void imx_get_mac_from_fuse(char *mac);
+int mx28_dram_init(void);
#endif /* __MX28_H__ */
@@ -70,27 +70,6 @@ int board_init(void)
return 0;
}
-#define HW_DIGCTRL_SCRATCH0 0x8001c280
-#define HW_DIGCTRL_SCRATCH1 0x8001c290
-int dram_init(void)
-{
- uint32_t sz[2];
-
- sz[0] = readl(HW_DIGCTRL_SCRATCH0);
- sz[1] = readl(HW_DIGCTRL_SCRATCH1);
-
- if (sz[0] != sz[1]) {
- printf("MX28:\n"
- "Error, the RAM size in HW_DIGCTRL_SCRATCH0 and\n"
- "HW_DIGCTRL_SCRATCH1 is not the same. Please\n"
- "verify these two registers contain valid RAM size!\n");
- hang();
- }
-
- gd->ram_size = sz[0];
- return 0;
-}
-
#ifdef CONFIG_CMD_MMC
static int m28_mmc_wp(int id)
{
Let dram_init function be a common function, so that other mx28 boards can reuse it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> --- Changes since v3: - Rename dram_init to mx28_dram_init arch/arm/cpu/arm926ejs/mx28/mx28.c | 21 +++++++++++++++++++++ arch/arm/include/asm/arch-mx28/sys_proto.h | 1 + board/denx/m28evk/m28evk.c | 21 --------------------- 3 files changed, 22 insertions(+), 21 deletions(-)