@@ -28,6 +28,7 @@ COBJS-$(CONFIG_USB_HOST_ETHER) += usb_ether.o
ifdef CONFIG_USB_ETHER_ASIX
COBJS-y += asix.o
endif
+COBJS-$(CONFIG_USB_ETHER_SMSC95XX) += smsc95xx.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
new file mode 100644
@@ -0,0 +1,922 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * Copyright (C) 2009 NVIDIA, Corporation
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <linux/mii.h>
+#include "usb_ether.h"
+
+/* SMSC LAN95xx based USB 2.0 Ethernet Devices */
+
+/* Tx command words */
+#define TX_CMD_A_FIRST_SEG_ (0x00002000)
+#define TX_CMD_A_LAST_SEG_ (0x00001000)
+
+/* Rx status word */
+#define RX_STS_FL_ (0x3FFF0000) /* Frame Length */
+#define RX_STS_ES_ (0x00008000) /* Error Summary */
+
+/* SCSRs */
+#define ID_REV (0x00)
+
+#define INT_STS (0x08)
+
+#define TX_CFG (0x10)
+#define TX_CFG_ON_ (0x00000004)
+
+#define HW_CFG (0x14)
+#define HW_CFG_BIR_ (0x00001000)
+#define HW_CFG_RXDOFF_ (0x00000600)
+#define HW_CFG_MEF_ (0x00000020)
+#define HW_CFG_BCE_ (0x00000002)
+#define HW_CFG_LRST_ (0x00000008)
+
+#define PM_CTRL (0x20)
+#define PM_CTL_PHY_RST_ (0x00000010)
+
+#define AFC_CFG (0x2C)
+
+/*
+ * Hi watermark = 15.5Kb (~10 mtu pkts)
+ * low watermark = 3k (~2 mtu pkts)
+ * backpressure duration = ~ 350us
+ * Apply FC on any frame.
+ */
+#define AFC_CFG_DEFAULT (0x00F830A1)
+
+#define E2P_CMD (0x30)
+#define E2P_CMD_BUSY_ (0x80000000)
+#define E2P_CMD_READ_ (0x00000000)
+#define E2P_CMD_TIMEOUT_ (0x00000400)
+#define E2P_CMD_LOADED_ (0x00000200)
+#define E2P_CMD_ADDR_ (0x000001FF)
+
+#define E2P_DATA (0x34)
+
+#define BURST_CAP (0x38)
+
+#define INT_EP_CTL (0x68)
+#define INT_EP_CTL_PHY_INT_ (0x00008000)
+
+#define BULK_IN_DLY (0x6C)
+
+/* MAC CSRs */
+#define MAC_CR (0x100)
+#define MAC_CR_MCPAS_ (0x00080000)
+#define MAC_CR_PRMS_ (0x00040000)
+#define MAC_CR_HPFILT_ (0x00002000)
+#define MAC_CR_TXEN_ (0x00000008)
+#define MAC_CR_RXEN_ (0x00000004)
+
+#define ADDRH (0x104)
+
+#define ADDRL (0x108)
+
+#define MII_ADDR (0x114)
+#define MII_WRITE_ (0x02)
+#define MII_BUSY_ (0x01)
+#define MII_READ_ (0x00) /* ~of MII Write bit */
+
+#define MII_DATA (0x118)
+
+#define FLOW (0x11C)
+
+#define VLAN1 (0x120)
+
+#define COE_CR (0x130)
+#define Tx_COE_EN_ (0x00010000)
+#define Rx_COE_EN_ (0x00000001)
+
+/* Vendor-specific PHY Definitions */
+#define PHY_INT_SRC (29)
+
+#define PHY_INT_MASK (30)
+#define PHY_INT_MASK_ANEG_COMP_ ((u16)0x0040)
+#define PHY_INT_MASK_LINK_DOWN_ ((u16)0x0010)
+#define PHY_INT_MASK_DEFAULT_ (PHY_INT_MASK_ANEG_COMP_ | \
+ PHY_INT_MASK_LINK_DOWN_)
+
+/* USB Vendor Requests */
+#define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0
+#define USB_VENDOR_REQUEST_READ_REGISTER 0xA1
+
+/* Some extra defines */
+#define HS_USB_PKT_SIZE (512)
+#define FS_USB_PKT_SIZE (64)
+#define DEFAULT_HS_BURST_CAP_SIZE (16 * 1024 + 5 * HS_USB_PKT_SIZE)
+#define DEFAULT_FS_BURST_CAP_SIZE (6 * 1024 + 33 * FS_USB_PKT_SIZE)
+#define DEFAULT_BULK_IN_DELAY (0x00002000)
+#define MAX_SINGLE_PACKET_SIZE (2048)
+#define EEPROM_MAC_OFFSET (0x01)
+#define SMSC95XX_INTERNAL_PHY_ID (1)
+#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */
+
+/* local defines */
+#define SMSC95XX_BASE_NAME "sms"
+#define USB_CTRL_SET_TIMEOUT 5000
+#define USB_CTRL_GET_TIMEOUT 5000
+#define USB_BULK_SEND_TIMEOUT 5000
+#define USB_BULK_RECV_TIMEOUT 5000
+
+#define AX_RX_URB_SIZE 2048
+#define PHY_CONNECT_TIMEOUT 5000
+
+/* local vars */
+static int curr_eth_dev; /* index for name of next device detected */
+static int turbo_mode = 1;
+
+
+/*
+ * Smsc95xx infrastructure commands
+ */
+static int smsc95xx_write_reg(struct ueth_data *dev, u32 index, u32 data)
+{
+ int len;
+
+ cpu_to_le32s(&data);
+
+ len = usb_control_msg(dev->pusb_dev, usb_sndctrlpipe(dev->pusb_dev, 0),
+ USB_VENDOR_REQUEST_WRITE_REGISTER,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 00, index, &data, sizeof(data), USB_CTRL_SET_TIMEOUT);
+
+ return len == sizeof(data) ? 0 : -1;
+}
+
+static int smsc95xx_read_reg(struct ueth_data *dev, u32 index, u32 *data)
+{
+ int len;
+
+ len = usb_control_msg(dev->pusb_dev, usb_rcvctrlpipe(dev->pusb_dev, 0),
+ USB_VENDOR_REQUEST_READ_REGISTER,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 00, index, data, sizeof(data), USB_CTRL_GET_TIMEOUT);
+
+ le32_to_cpus(data);
+ return len == sizeof(data) ? 0 : -1;
+}
+
+/* Loop until the read is completed with timeout */
+static int smsc95xx_phy_wait_not_busy(struct ueth_data *dev)
+{
+ unsigned long start_time = get_timer(0);
+ u32 val;
+
+ do {
+ smsc95xx_read_reg(dev, MII_ADDR, &val);
+ if (!(val & MII_BUSY_))
+ return 0;
+ } while (get_timer(start_time) < 1 * 1000 * 1000);
+
+ return -1;
+}
+
+static int smsc95xx_mdio_read(struct ueth_data *dev, int phy_id, int idx)
+{
+ u32 val, addr;
+
+ /* confirm MII not busy */
+ if (smsc95xx_phy_wait_not_busy(dev)) {
+ debug("MII is busy in smsc95xx_mdio_read\n");
+ return -1;
+ }
+
+ /* set the address, index & direction (read from PHY) */
+ addr = (phy_id << 11) | (idx << 6) | MII_READ_;
+ smsc95xx_write_reg(dev, MII_ADDR, addr);
+
+ if (smsc95xx_phy_wait_not_busy(dev)) {
+ debug("Timed out reading MII reg %02X\n", idx);
+ return -1;
+ }
+
+ smsc95xx_read_reg(dev, MII_DATA, &val);
+
+ return (u16)(val & 0xFFFF);
+}
+
+static void smsc95xx_mdio_write(struct ueth_data *dev, int phy_id, int idx,
+ int regval)
+{
+ u32 val, addr;
+
+ /* confirm MII not busy */
+ if (smsc95xx_phy_wait_not_busy(dev)) {
+ debug("MII is busy in smsc95xx_mdio_write\n");
+ return;
+ }
+
+ val = regval;
+ smsc95xx_write_reg(dev, MII_DATA, val);
+
+ /* set the address, index & direction (write to PHY) */
+ addr = (phy_id << 11) | (idx << 6) | MII_WRITE_;
+ smsc95xx_write_reg(dev, MII_ADDR, addr);
+
+ if (smsc95xx_phy_wait_not_busy(dev))
+ debug("Timed out writing MII reg %02X\n", idx);
+}
+
+static int smsc95xx_eeprom_confirm_not_busy(struct ueth_data *dev)
+{
+ unsigned long start_time = get_timer(0);
+ u32 val;
+
+ do {
+ smsc95xx_read_reg(dev, E2P_CMD, &val);
+ if (!(val & E2P_CMD_LOADED_)) {
+ debug("No EEPROM present\n");
+ return -1;
+ }
+ if (!(val & E2P_CMD_BUSY_))
+ return 0;
+ udelay(40);
+ } while (get_timer(start_time) < 1 * 1000 * 1000);
+
+ debug("EEPROM is busy\n");
+ return -1;
+}
+
+static int smsc95xx_wait_eeprom(struct ueth_data *dev)
+{
+ unsigned long start_time = get_timer(0);
+ u32 val;
+
+ do {
+ smsc95xx_read_reg(dev, E2P_CMD, &val);
+ if (!(val & E2P_CMD_BUSY_) || (val & E2P_CMD_TIMEOUT_))
+ break;
+ udelay(40);
+ } while (get_timer(start_time) < 1 * 1000 * 1000);
+
+ if (val & (E2P_CMD_TIMEOUT_ | E2P_CMD_BUSY_)) {
+ debug("EEPROM read operation timeout\n");
+ return -1;
+ }
+ return 0;
+}
+
+static int smsc95xx_read_eeprom(struct ueth_data *dev, u32 offset, u32 length,
+ u8 *data)
+{
+ u32 val;
+ int i, ret;
+
+ ret = smsc95xx_eeprom_confirm_not_busy(dev);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < length; i++) {
+ val = E2P_CMD_BUSY_ | E2P_CMD_READ_ | (offset & E2P_CMD_ADDR_);
+ smsc95xx_write_reg(dev, E2P_CMD, val);
+
+ ret = smsc95xx_wait_eeprom(dev);
+ if (ret < 0)
+ return ret;
+
+ smsc95xx_read_reg(dev, E2P_DATA, &val);
+ data[i] = val & 0xFF;
+ offset++;
+ }
+ return 0;
+}
+
+/*
+ * mii_nway_restart - restart NWay (autonegotiation) for this interface
+ *
+ * Returns 0 on success, negative on error.
+ */
+static int mii_nway_restart(struct ueth_data *dev)
+{
+ int bmcr;
+ int r = -1;
+
+ /* if autoneg is off, it's an error */
+ bmcr = smsc95xx_mdio_read(dev, dev->phy_id, MII_BMCR);
+
+ if (bmcr & BMCR_ANENABLE) {
+ bmcr |= BMCR_ANRESTART;
+ smsc95xx_mdio_write(dev, dev->phy_id, MII_BMCR, bmcr);
+ r = 0;
+ }
+ return r;
+}
+
+static int smsc95xx_phy_initialize(struct ueth_data *dev)
+{
+ smsc95xx_mdio_write(dev, dev->phy_id, MII_BMCR, BMCR_RESET);
+ smsc95xx_mdio_write(dev, dev->phy_id, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
+ ADVERTISE_PAUSE_ASYM);
+
+ /* read to clear */
+ smsc95xx_mdio_read(dev, dev->phy_id, PHY_INT_SRC);
+
+ smsc95xx_mdio_write(dev, dev->phy_id, PHY_INT_MASK,
+ PHY_INT_MASK_DEFAULT_);
+ mii_nway_restart(dev);
+
+ debug("phy initialised succesfully\n");
+ return 0;
+}
+
+static int smsc95xx_init_mac_address(struct eth_device *eth,
+ struct ueth_data *dev)
+{
+ /* try reading mac address from EEPROM */
+ if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
+ eth->enetaddr) == 0) {
+ if (is_valid_ether_addr(eth->enetaddr)) {
+ /* eeprom values are valid so use them */
+ debug("MAC address read from EEPROM\n");
+ return 0;
+ }
+ }
+
+ /*
+ * No eeprom, or eeprom values are invalid. Generating a random MAC
+ * address is not safe. Just return an error.
+ */
+ return -1;
+}
+
+static int smsc95xx_write_hwaddr(struct eth_device *eth)
+{
+ struct ueth_data *dev = (struct ueth_data *)eth->priv;
+ u32 addr_lo, addr_hi;
+ int ret;
+
+ /* set hardware address */
+ debug("** %s()\n", __func__);
+ addr_lo = cpu_to_le32(*((u32 *)eth->enetaddr));
+ addr_hi = cpu_to_le16(*((u16 *)(eth->enetaddr + 4)));
+ ret = smsc95xx_write_reg(dev, ADDRL, addr_lo);
+ if (ret < 0) {
+ debug("Failed to write ADDRL: %d\n", ret);
+ return ret;
+ }
+
+ ret = smsc95xx_write_reg(dev, ADDRH, addr_hi);
+ if (ret < 0) {
+ debug("Failed to write ADDRH: %d\n", ret);
+ return ret;
+ }
+ debug("MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
+ eth->enetaddr[0], eth->enetaddr[1],
+ eth->enetaddr[2], eth->enetaddr[3],
+ eth->enetaddr[4], eth->enetaddr[5]);
+ dev->have_hwaddr = 1;
+ return 0;
+}
+
+/* Enable or disable Tx & Rx checksum offload engines */
+static int smsc95xx_set_csums(struct ueth_data *dev,
+ int use_tx_csum, int use_rx_csum)
+{
+ u32 read_buf;
+ int ret = smsc95xx_read_reg(dev, COE_CR, &read_buf);
+ if (ret < 0) {
+ debug("Failed to read COE_CR: %d\n", ret);
+ return ret;
+ }
+
+ if (use_tx_csum)
+ read_buf |= Tx_COE_EN_;
+ else
+ read_buf &= ~Tx_COE_EN_;
+
+ if (use_rx_csum)
+ read_buf |= Rx_COE_EN_;
+ else
+ read_buf &= ~Rx_COE_EN_;
+
+ ret = smsc95xx_write_reg(dev, COE_CR, read_buf);
+ if (ret < 0) {
+ debug("Failed to write COE_CR: %d\n", ret);
+ return ret;
+ }
+
+ debug("COE_CR = 0x%08x\n", read_buf);
+ return 0;
+}
+
+static void smsc95xx_set_multicast(struct ueth_data *dev)
+{
+ /* No multicast in u-boot */
+ dev->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
+}
+
+/* starts the TX path */
+static void smsc95xx_start_tx_path(struct ueth_data *dev)
+{
+ u32 reg_val;
+
+ /* Enable Tx at MAC */
+ dev->mac_cr |= MAC_CR_TXEN_;
+
+ smsc95xx_write_reg(dev, MAC_CR, dev->mac_cr);
+
+ /* Enable Tx at SCSRs */
+ reg_val = TX_CFG_ON_;
+ smsc95xx_write_reg(dev, TX_CFG, reg_val);
+}
+
+/* Starts the Receive path */
+static void smsc95xx_start_rx_path(struct ueth_data *dev)
+{
+ dev->mac_cr |= MAC_CR_RXEN_;
+ smsc95xx_write_reg(dev, MAC_CR, dev->mac_cr);
+}
+
+/*
+ * Smsc95xx callbacks
+ */
+static int smsc95xx_init(struct eth_device *eth, bd_t *bd)
+{
+ int ret;
+ u32 write_buf;
+ u32 read_buf;
+ u32 burst_cap;
+ int timeout;
+ struct ueth_data *dev = (struct ueth_data *)eth->priv;
+#define TIMEOUT_RESOLUTION 50 /* ms */
+ int link_detected;
+
+ debug("** %s()\n", __func__);
+ dev->phy_id = SMSC95XX_INTERNAL_PHY_ID; /* fixed phy id */
+
+ write_buf = HW_CFG_LRST_;
+ ret = smsc95xx_write_reg(dev, HW_CFG, write_buf);
+ if (ret < 0) {
+ debug("Failed to write HW_CFG_LRST_ bit in HW_CFG "
+ "register, ret = %d\n", ret);
+ return ret;
+ }
+
+ timeout = 0;
+ do {
+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+ if (ret < 0) {
+ debug("Failed to read HW_CFG: %d\n", ret);
+ return ret;
+ }
+ udelay(10 * 1000);
+ timeout++;
+ } while ((read_buf & HW_CFG_LRST_) && (timeout < 100));
+
+ if (timeout >= 100) {
+ debug("timeout waiting for completion of Lite Reset\n");
+ return -1;
+ }
+
+ write_buf = PM_CTL_PHY_RST_;
+ ret = smsc95xx_write_reg(dev, PM_CTRL, write_buf);
+ if (ret < 0) {
+ debug("Failed to write PM_CTRL: %d\n", ret);
+ return ret;
+ }
+
+ timeout = 0;
+ do {
+ ret = smsc95xx_read_reg(dev, PM_CTRL, &read_buf);
+ if (ret < 0) {
+ debug("Failed to read PM_CTRL: %d\n", ret);
+ return ret;
+ }
+ udelay(10 * 1000);
+ timeout++;
+ } while ((read_buf & PM_CTL_PHY_RST_) && (timeout < 100));
+ if (timeout >= 100) {
+ debug("timeout waiting for PHY Reset\n");
+ return -1;
+ }
+ if (!dev->have_hwaddr && smsc95xx_init_mac_address(eth, dev) == 0)
+ dev->have_hwaddr = 1;
+ if (!dev->have_hwaddr) {
+ puts("Error: SMSC95xx: No MAC address set - set usbethaddr\n");
+ return -1;
+ }
+ if (smsc95xx_write_hwaddr(eth) < 0)
+ return -1;
+
+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+ if (ret < 0) {
+ debug("Failed to read HW_CFG: %d\n", ret);
+ return ret;
+ }
+ debug("Read Value from HW_CFG : 0x%08x\n", read_buf);
+
+ read_buf |= HW_CFG_BIR_;
+ ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
+ if (ret < 0) {
+ debug("Failed to write HW_CFG_BIR_ bit in HW_CFG "
+ "register, ret = %d\n", ret);
+ return ret;
+ }
+
+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+ if (ret < 0) {
+ debug("Failed to read HW_CFG: %d\n", ret);
+ return ret;
+ }
+ debug("Read Value from HW_CFG after writing "
+ "HW_CFG_BIR_: 0x%08x\n", read_buf);
+
+ if (!turbo_mode) {
+ burst_cap = 0;
+ dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
+ } else if (dev->pusb_dev->speed == USB_SPEED_HIGH) {
+ burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
+ dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
+ } else {
+ burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
+ dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
+ }
+ debug("rx_urb_size=%ld\n", (ulong)dev->rx_urb_size);
+
+ ret = smsc95xx_write_reg(dev, BURST_CAP, burst_cap);
+ if (ret < 0) {
+ debug("Failed to write BURST_CAP: %d\n", ret);
+ return ret;
+ }
+
+ ret = smsc95xx_read_reg(dev, BURST_CAP, &read_buf);
+ if (ret < 0) {
+ debug("Failed to read BURST_CAP: %d\n", ret);
+ return ret;
+ }
+ debug("Read Value from BURST_CAP after writing: 0x%08x\n", read_buf);
+
+ read_buf = DEFAULT_BULK_IN_DELAY;
+ ret = smsc95xx_write_reg(dev, BULK_IN_DLY, read_buf);
+ if (ret < 0) {
+ debug("ret = %d", ret);
+ return ret;
+ }
+
+ ret = smsc95xx_read_reg(dev, BULK_IN_DLY, &read_buf);
+ if (ret < 0) {
+ debug("Failed to read BULK_IN_DLY: %d\n", ret);
+ return ret;
+ }
+ debug("Read Value from BULK_IN_DLY after writing: "
+ "0x%08x\n", read_buf);
+
+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+ if (ret < 0) {
+ debug("Failed to read HW_CFG: %d\n", ret);
+ return ret;
+ }
+ debug("Read Value from HW_CFG: 0x%08x\n", read_buf);
+
+ if (turbo_mode)
+ read_buf |= (HW_CFG_MEF_ | HW_CFG_BCE_);
+ read_buf &= ~HW_CFG_RXDOFF_;
+
+#ifdef CONFIG_TEGRA2
+ /* Tegra2 requires NET_IP_ALIGN = 0 */
+#define NET_IP_ALIGN 0
+#else
+ /* set Rx data offset=2, Make IP header aligns on word boundary. */
+#define NET_IP_ALIGN 2
+#endif
+ read_buf |= NET_IP_ALIGN << 9;
+
+ ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
+ if (ret < 0) {
+ debug("Failed to write HW_CFG register, ret=%d\n", ret);
+ return ret;
+ }
+
+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+ if (ret < 0) {
+ debug("Failed to read HW_CFG: %d\n", ret);
+ return ret;
+ }
+ debug("Read Value from HW_CFG after writing: 0x%08x\n", read_buf);
+
+ write_buf = 0xFFFFFFFF;
+ ret = smsc95xx_write_reg(dev, INT_STS, write_buf);
+ if (ret < 0) {
+ debug("Failed to write INT_STS register, ret=%d\n", ret);
+ return ret;
+ }
+
+ ret = smsc95xx_read_reg(dev, ID_REV, &read_buf);
+ if (ret < 0) {
+ debug("Failed to read ID_REV: %d\n", ret);
+ return ret;
+ }
+ debug("ID_REV = 0x%08x\n", read_buf);
+
+ /* Init Tx */
+ write_buf = 0;
+ ret = smsc95xx_write_reg(dev, FLOW, write_buf);
+ if (ret < 0) {
+ debug("Failed to write FLOW: %d\n", ret);
+ return ret;
+ }
+
+ read_buf = AFC_CFG_DEFAULT;
+ ret = smsc95xx_write_reg(dev, AFC_CFG, read_buf);
+ if (ret < 0) {
+ debug("Failed to write AFC_CFG: %d\n", ret);
+ return ret;
+ }
+
+ ret = smsc95xx_read_reg(dev, MAC_CR, &dev->mac_cr);
+ if (ret < 0) {
+ debug("Failed to read MAC_CR: %d\n", ret);
+ return ret;
+ }
+
+ /* Init Rx. Set Vlan */
+ write_buf = (u32)ETH_P_8021Q;
+ ret = smsc95xx_write_reg(dev, VLAN1, write_buf);
+ if (ret < 0) {
+ debug("Failed to write VAN1: %d\n", ret);
+ return ret;
+ }
+
+ /* Disable checksum offload engines */
+ ret = smsc95xx_set_csums(dev, 0, 0);
+ if (ret < 0) {
+ debug("Failed to set csum offload: %d\n", ret);
+ return ret;
+ }
+ smsc95xx_set_multicast(dev);
+
+ if (smsc95xx_phy_initialize(dev) < 0)
+ return -1;
+ ret = smsc95xx_read_reg(dev, INT_EP_CTL, &read_buf);
+ if (ret < 0) {
+ debug("Failed to read INT_EP_CTL: %d", ret);
+ return ret;
+ }
+ /* enable PHY interrupts */
+ read_buf |= INT_EP_CTL_PHY_INT_;
+
+ ret = smsc95xx_write_reg(dev, INT_EP_CTL, read_buf);
+ if (ret < 0) {
+ debug("Failed to write INT_EP_CTL: %d", ret);
+ return ret;
+ }
+
+ smsc95xx_start_tx_path(dev);
+ smsc95xx_start_rx_path(dev);
+
+ timeout = 0;
+ do {
+ link_detected = smsc95xx_mdio_read(dev, dev->phy_id, MII_BMSR)
+ & BMSR_LSTATUS;
+ if (!link_detected) {
+ if (timeout == 0)
+ printf("Waiting for Ethernet connection... ");
+ udelay(TIMEOUT_RESOLUTION * 1000);
+ timeout += TIMEOUT_RESOLUTION;
+ }
+ } while (!link_detected && timeout < PHY_CONNECT_TIMEOUT);
+ if (link_detected) {
+ if (timeout != 0)
+ printf("done.\n");
+ } else {
+ printf("unable to connect.\n");
+ return -1;
+ }
+ return 0;
+}
+
+static int smsc95xx_send(struct eth_device *eth, volatile void* packet,
+ int length)
+{
+ struct ueth_data *dev = (struct ueth_data *)eth->priv;
+ int err;
+ int actual_len;
+ u32 tx_cmd_a;
+ u32 tx_cmd_b;
+ unsigned char msg[PKTSIZE + sizeof(tx_cmd_a) + sizeof(tx_cmd_b)];
+
+ debug("** %s(), len %d, buf %#x\n", __func__, length, (int)msg);
+ if (length > PKTSIZE)
+ return -1;
+
+ tx_cmd_a = (u32)length | TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_;
+ tx_cmd_b = (u32)length;
+ cpu_to_le32s(&tx_cmd_a);
+ cpu_to_le32s(&tx_cmd_b);
+
+ /* prepend cmd_a and cmd_b */
+ memcpy(msg, &tx_cmd_a, sizeof(tx_cmd_a));
+ memcpy(msg + sizeof(tx_cmd_a), &tx_cmd_b, sizeof(tx_cmd_b));
+ memcpy(msg + sizeof(tx_cmd_a) + sizeof(tx_cmd_b), (void *)packet,
+ length);
+ err = usb_bulk_msg(dev->pusb_dev,
+ usb_sndbulkpipe(dev->pusb_dev, dev->ep_out),
+ (void *)msg,
+ length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b),
+ &actual_len,
+ USB_BULK_SEND_TIMEOUT);
+ debug("Tx: len = %u, actual = %u, err = %d\n",
+ length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b),
+ actual_len, err);
+ return err;
+}
+
+static int smsc95xx_recv(struct eth_device *eth)
+{
+ struct ueth_data *dev = (struct ueth_data *)eth->priv;
+ static unsigned char recv_buf[AX_RX_URB_SIZE];
+ unsigned char *buf_ptr;
+ int err;
+ int actual_len;
+ u32 packet_len;
+ int cur_buf_align;
+
+ debug("** %s()\n", __func__);
+ err = usb_bulk_msg(dev->pusb_dev,
+ usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in),
+ (void *)recv_buf,
+ AX_RX_URB_SIZE,
+ &actual_len,
+ USB_BULK_RECV_TIMEOUT);
+ debug("Rx: len = %u, actual = %u, err = %d\n", AX_RX_URB_SIZE,
+ actual_len, err);
+ if (err != 0) {
+ debug("Rx: failed to receive\n");
+ return -1;
+ }
+ if (actual_len > AX_RX_URB_SIZE) {
+ debug("Rx: received too many bytes %d\n", actual_len);
+ return -1;
+ }
+
+ buf_ptr = recv_buf;
+ while (actual_len > 0) {
+ /*
+ * 1st 4 bytes contain the length of the actual data plus error
+ * info. Extract data length.
+ */
+ if (actual_len < sizeof(packet_len)) {
+ debug("Rx: incomplete packet length\n");
+ return -1;
+ }
+ memcpy(&packet_len, buf_ptr, sizeof(packet_len));
+ le32_to_cpus(&packet_len);
+ if (packet_len & RX_STS_ES_) {
+ debug("Rx: Error header=%#x", packet_len);
+ return -1;
+ }
+ packet_len = ((packet_len & RX_STS_FL_) >> 16);
+
+ if (packet_len > actual_len - sizeof(packet_len)) {
+ debug("Rx: too large packet: %d\n", packet_len);
+ return -1;
+ }
+
+ /* Notify net stack */
+ NetReceive(buf_ptr + sizeof(packet_len), packet_len - 4);
+
+ /* Adjust for next iteration */
+ actual_len -= sizeof(packet_len) + packet_len;
+ buf_ptr += sizeof(packet_len) + packet_len;
+ cur_buf_align = (int)buf_ptr - (int)recv_buf;
+
+ if (cur_buf_align & 0x03) {
+ int align = 4 - (cur_buf_align & 0x03);
+
+ actual_len -= align;
+ buf_ptr += align;
+ }
+ }
+ return err;
+}
+
+static void smsc95xx_halt(struct eth_device *eth)
+{
+ debug("** %s()\n", __func__);
+}
+
+/*
+ * SMSC probing functions
+ */
+void smsc95xx_eth_before_probe(void)
+{
+ curr_eth_dev = 0;
+}
+
+struct smsc95xx_dongle {
+ unsigned short vendor;
+ unsigned short product;
+};
+
+static const struct smsc95xx_dongle smsc95xx_dongles[] = {
+ { 0x0424, 0xec00 }, /* LAN9512/LAN9514 Ethernet */
+ { 0x0424, 0x9500 }, /* LAN9500 Ethernet */
+ { 0x0000, 0x0000 } /* END - Do not remove */
+};
+
+/* Probe to see if a new device is actually an SMSC device */
+int smsc95xx_eth_probe(struct usb_device *dev, unsigned int ifnum,
+ struct ueth_data *ss)
+{
+ struct usb_interface *iface;
+ struct usb_interface_descriptor *iface_desc;
+ int i;
+
+ /* let's examine the device now */
+ iface = &dev->config.if_desc[ifnum];
+ iface_desc = &dev->config.if_desc[ifnum].desc;
+
+ for (i = 0; smsc95xx_dongles[i].vendor != 0; i++) {
+ if (dev->descriptor.idVendor == smsc95xx_dongles[i].vendor &&
+ dev->descriptor.idProduct == smsc95xx_dongles[i].product)
+ /* Found a supported dongle */
+ break;
+ }
+ if (smsc95xx_dongles[i].vendor == 0)
+ return 0;
+
+ /* At this point, we know we've got a live one */
+ debug("\n\nUSB Ethernet device detected\n");
+ memset(ss, '\0', sizeof(struct ueth_data));
+
+ /* Initialize the ueth_data structure with some useful info */
+ ss->ifnum = ifnum;
+ ss->pusb_dev = dev;
+ ss->subclass = iface_desc->bInterfaceSubClass;
+ ss->protocol = iface_desc->bInterfaceProtocol;
+
+ /*
+ * We are expecting a minimum of 3 endpoints - in, out (bulk), and int.
+ * We will ignore any others.
+ */
+ for (i = 0; i < iface_desc->bNumEndpoints; i++) {
+ /* is it an BULK endpoint? */
+ if ((iface->ep_desc[i].bmAttributes &
+ USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
+ if (iface->ep_desc[i].bEndpointAddress & USB_DIR_IN)
+ ss->ep_in =
+ iface->ep_desc[i].bEndpointAddress &
+ USB_ENDPOINT_NUMBER_MASK;
+ else
+ ss->ep_out =
+ iface->ep_desc[i].bEndpointAddress &
+ USB_ENDPOINT_NUMBER_MASK;
+ }
+
+ /* is it an interrupt endpoint? */
+ if ((iface->ep_desc[i].bmAttributes &
+ USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
+ ss->ep_int = iface->ep_desc[i].bEndpointAddress &
+ USB_ENDPOINT_NUMBER_MASK;
+ ss->irqinterval = iface->ep_desc[i].bInterval;
+ }
+ }
+ debug("Endpoints In %d Out %d Int %d\n",
+ ss->ep_in, ss->ep_out, ss->ep_int);
+
+ /* Do some basic sanity checks, and bail if we find a problem */
+ if (usb_set_interface(dev, iface_desc->bInterfaceNumber, 0) ||
+ !ss->ep_in || !ss->ep_out || !ss->ep_int) {
+ debug("Problems with device\n");
+ return 0;
+ }
+ dev->privptr = (void *)ss;
+ return 1;
+}
+
+int smsc95xx_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
+ struct eth_device *eth)
+{
+ debug("** %s()\n", __func__);
+ if (!eth) {
+ debug("%s: missing parameter.\n", __func__);
+ return 0;
+ }
+ sprintf(eth->name, "%s%d", SMSC95XX_BASE_NAME, curr_eth_dev++);
+ eth->init = smsc95xx_init;
+ eth->send = smsc95xx_send;
+ eth->recv = smsc95xx_recv;
+ eth->halt = smsc95xx_halt;
+ eth->priv = ss;
+ return 1;
+}
@@ -45,6 +45,13 @@ static const struct usb_eth_prob_dev prob_dev[] = {
.get_info = asix_eth_get_info,
},
#endif
+#ifdef CONFIG_USB_ETHER_SMSC95XX
+ {
+ .before_probe = smsc95xx_eth_before_probe,
+ .probe = smsc95xx_eth_probe,
+ .get_info = smsc95xx_eth_get_info,
+ },
+#endif
{ }, /* END */
};
The SMSC95XX is a USB hub with a built-in Ethernet adapter. This adds support for this, using the USB host network framework. TEST=usb start; bootp; tftp ... Signed-off-by: Simon Glass <sjg@chromium.org> --- Changes for v2: - Coding style cleanup - Changed some comments as suggested - eth_set_hwaddr -> eth_write_hwaddr - tided up other users of eth_getenv_enetaddr_by_index() --- drivers/usb/eth/Makefile | 1 + drivers/usb/eth/smsc95xx.c | 922 +++++++++++++++++++++++++++++++++++++++++++ drivers/usb/eth/usb_ether.c | 7 + 3 files changed, 930 insertions(+), 0 deletions(-) create mode 100644 drivers/usb/eth/smsc95xx.c