diff mbox

[U-Boot,1/6] Davinci: ea20: set console on UART0

Message ID 1302372335-30232-1-git-send-email-sbabic@denx.de
State Superseded, archived
Delegated to: Sandeep Paulraj
Headers show

Commit Message

Stefano Babic April 9, 2011, 6:05 p.m. UTC 
From: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>

Signed-off-by: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Sandeep Paulraj <s-paulraj@ti.com>
---
 arch/arm/include/asm/arch-davinci/hardware.h |    2 +-
 board/davinci/ea20/ea20.c                    |   16 ++++++++--------
 include/configs/ea20.h                       |    2 +-
 3 files changed, 10 insertions(+), 10 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h
index df3f549..1892f15 100644
--- a/arch/arm/include/asm/arch-davinci/hardware.h
+++ b/arch/arm/include/asm/arch-davinci/hardware.h
@@ -412,7 +412,7 @@  struct davinci_syscfg_regs {
 #define DAVINCI_SYSCFG_SUSPSRC_I2C		(1 << 16)
 #define DAVINCI_SYSCFG_SUSPSRC_SPI0		(1 << 21)
 #define DAVINCI_SYSCFG_SUSPSRC_SPI1		(1 << 22)
-#define DAVINCI_SYSCFG_SUSPSRC_UART2		(1 << 20)
+#define DAVINCI_SYSCFG_SUSPSRC_UART0		(1 << 18)
 #define DAVINCI_SYSCFG_SUSPSRC_TIMER0		(1 << 27)
 
 /* Interrupt controller */
diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c
index 9d0f71b..4e4107a 100644
--- a/board/davinci/ea20/ea20.c
+++ b/board/davinci/ea20/ea20.c
@@ -48,12 +48,12 @@  static const struct pinmux_config spi1_pins[] = {
 	{ pinmux(5), 1, 5 }
 };
 
-/* UART pin muxer settings */
+/* UART0 pin muxer settings */
 static const struct pinmux_config uart_pins[] = {
-	{ pinmux(0), 4, 6 },
-	{ pinmux(0), 4, 7 },
-	{ pinmux(4), 2, 4 },
-	{ pinmux(4), 2, 5 }
+	{ pinmux(3), 2, 7 },
+	{ pinmux(3), 2, 6 },
+	{ pinmux(3), 2, 4 },
+	{ pinmux(3), 2, 5 }
 };
 
 #ifdef CONFIG_DRIVER_TI_EMAC
@@ -104,7 +104,7 @@  static const struct lpsc_resource lpsc[] = {
 	{ DAVINCI_LPSC_AEMIF },	/* NAND, NOR */
 	{ DAVINCI_LPSC_SPI1 },	/* Serial Flash */
 	{ DAVINCI_LPSC_EMAC },	/* image download */
-	{ DAVINCI_LPSC_UART2 },	/* console */
+	{ DAVINCI_LPSC_UART0 },	/* console */
 	{ DAVINCI_LPSC_GPIO },
 };
 
@@ -150,7 +150,7 @@  int board_init(void)
 	writel(readl(&davinci_syscfg_regs->suspsrc) &
 	       ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C |
 		 DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 |
-		 DAVINCI_SYSCFG_SUSPSRC_UART2),
+		 DAVINCI_SYSCFG_SUSPSRC_UART0),
 	       &davinci_syscfg_regs->suspsrc);
 
 	/* configure pinmux settings */
@@ -167,7 +167,7 @@  int board_init(void)
 	/* enable the console UART */
 	writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
 		DAVINCI_UART_PWREMU_MGMT_UTRST),
-	       &davinci_uart2_ctrl_regs->pwremu_mgmt);
+	       &davinci_uart0_ctrl_regs->pwremu_mgmt);
 
 	return 0;
 }
diff --git a/include/configs/ea20.h b/include/configs/ea20.h
index 48ce945..601990a 100644
--- a/include/configs/ea20.h
+++ b/include/configs/ea20.h
@@ -67,7 +67,7 @@ 
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size */
-#define CONFIG_SYS_NS16550_COM1	DAVINCI_UART2_BASE /* Base address of UART2 */
+#define CONFIG_SYS_NS16550_COM1	DAVINCI_UART0_BASE /* Base address of UART0 */
 #define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
 #define CONFIG_BAUDRATE		115200		/* Default baud rate */