diff mbox

[U-Boot] powerpc/8xxx: Add additional cycle to write-to-read turnaound for DDR3

Message ID 1297361590-8953-1-git-send-email-yorksun@freescale.com
State Accepted
Commit 856e4b0d7fa366b300bae4f5b9512d7baac6bff1
Headers show

Commit Message

York Sun Feb. 10, 2011, 6:13 p.m. UTC 
When DDR data rate is higher than 1200MT/s or controller interleaving is
enabled, additional cycle for write-to-read turnaround is needed to satisfy
dynamic ODT timing.

Signed-off-by: York Sun <yorksun@freescale.com>
---
 arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c |    3 +++
 arch/powerpc/cpu/mpc8xxx/ddr/ddr.h       |    2 +-
 2 files changed, 4 insertions(+), 1 deletions(-)
diff mbox

Patch

diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
index c3e1d76..936c195 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -236,9 +236,12 @@  static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
 	 * tAXPD=1, need design to confirm.
 	 */
 	int tXP = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */
+	unsigned int data_rate = fsl_ddr_get_mem_data_rate();
 	tmrd_mclk = 4;
 	/* set the turnaround time */
 	trwt_mclk = 1;
+	if ((data_rate/1000000 > 1150) || (popts->memctl_interleaving))
+		twrt_mclk = 1;
 
 	if (popts->dynamic_power == 0) {	/* powerdown is not used */
 		act_pd_exit_mclk = 1;
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h
index 35b60a0..c7c12c1 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h
@@ -80,5 +80,5 @@  extern void check_interleaving_options(fsl_ddr_info_t *pinfo);
 extern unsigned int mclk_to_picos(unsigned int mclk);
 extern unsigned int get_memory_clk_period_ps(void);
 extern unsigned int picos_to_mclk(unsigned int picos);
-
+extern unsigned int fsl_ddr_get_mem_data_rate(void);
 #endif