diff mbox

[U-Boot,v3,8/8] powerpc/85xx: Add SRIO support to P2020DS

Message ID 1294733436-10264-8-git-send-email-galak@kernel.crashing.org
State Accepted
Commit 28a096e7f25d43824618d210b5b20b1961b94d79
Delegated to: Kumar Gala
Headers show

Commit Message

Kumar Gala Jan. 11, 2011, 8:10 a.m. UTC 
From: Li Yang <leoli@freescale.com>

The P2020 has 2 SRIO ports and they are useable on the P2020 DS board.
Enable them using the common SRIO init code.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
* Renamed CONFIG_SYS_HAS_SRIO -> CONFIG_SYS_SRIO

 include/configs/P2020DS.h |   24 +++++++++++++++++++++++-
 1 files changed, 23 insertions(+), 1 deletions(-)

Comments

Kumar Gala Jan. 11, 2011, 2:14 p.m. UTC | #1 
On Jan 11, 2011, at 2:10 AM, Kumar Gala wrote:

> From: Li Yang <leoli@freescale.com>
> 
> The P2020 has 2 SRIO ports and they are useable on the P2020 DS board.
> Enable them using the common SRIO init code.
> 
> Signed-off-by: Li Yang <leoli@freescale.com>
> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
> ---
> * Renamed CONFIG_SYS_HAS_SRIO -> CONFIG_SYS_SRIO
> 
> include/configs/P2020DS.h |   24 +++++++++++++++++++++++-
> 1 files changed, 23 insertions(+), 1 deletions(-)

applied to 85xx

- k
diff mbox

Patch

diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 24f2498..c2636af 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -1,5 +1,5 @@ 
 /*
- * Copyright 2007-2010 Freescale Semiconductor, Inc.
+ * Copyright 2007-2011 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -45,6 +45,10 @@ 
 #define CONFIG_SYS_TEXT_BASE	0xeff80000
 #endif
 
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1			/* SRIO port 1 */
+#define CONFIG_SRIO2			/* SRIO port 2 */
+
 #define CONFIG_FSL_ELBC		1	/* Has Enhanced localbus controller */
 #define CONFIG_PCI		1	/* Enable PCI/PCIE */
 #define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
@@ -472,6 +476,24 @@ 
 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 #endif
 
+/* SRIO1 uses the same window as PCIE2 mem window */
+#define CONFIG_SYS_SRIO1_MEM_VIRT	0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_SRIO1_MEM_PHYS	0xc20000000ull
+#else
+#define CONFIG_SYS_SRIO1_MEM_PHYS	0xa0000000
+#endif
+#define CONFIG_SYS_SRIO1_MEM_SIZE	0x20000000	/* 512M */
+
+/* SRIO2 uses the same window as PCIE1 mem window */
+#define CONFIG_SYS_SRIO2_MEM_VIRT	0xc0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_SRIO2_MEM_PHYS	0xc40000000ull
+#else
+#define CONFIG_SYS_SRIO2_MEM_PHYS	0xc0000000
+#endif
+#define CONFIG_SYS_SRIO2_MEM_SIZE	0x20000000	/* 512M */
+
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */