deleted file mode 100644
@@ -1,28 +0,0 @@
-#
-# Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr>
-#
-# (C) Copyright 2009
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-# MA 02110-1301 USA
-#
-
-# TEXT_BASE must equal the intended FLASH location of u-boot.
-CONFIG_SYS_TEXT_BASE = 0xfff90000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2005-2007
-# Samsung Electronics
-#
-# Samsung December board with OMAP2420 (ARM1136) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# December has 1 bank of 128MB mDDR-SDRAM on CS0
-# December has 1 bank of 00MB mDDR-SDRAM on CS1
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1) ES2 will be configurable
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x83e80000
-
-# Used with full SRAM boot.
-# This is either with a GP system or a signed boot image.
-# easiest, and safest way to go if you can.
-#CONFIG_SYS_TEXT_BASE = 0x40270000
-
-# Handy to get symbols to debug ROM version.
-#CONFIG_SYS_TEXT_BASE = 0x0
-#CONFIG_SYS_TEXT_BASE = 0x08000000
deleted file mode 100644
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#address where u-boot will be relocated
-CONFIG_SYS_TEXT_BASE = 0xc0f80000
deleted file mode 100644
@@ -1,5 +0,0 @@
-#
-# image should be loaded at 0x01000000
-#
-
-CONFIG_SYS_TEXT_BASE = 0x01000000
deleted file mode 100644
@@ -1,5 +0,0 @@
-#
-# image should be loaded at 0x01000000
-#
-
-CONFIG_SYS_TEXT_BASE = 0x01000000
deleted file mode 100644
@@ -1,7 +0,0 @@
-#
-# SA-1110 based Intel Assabet board
-#
-# The Intel Assabet 1 bank of 32 MiB SDRAM
-#
-
-CONFIG_SYS_TEXT_BASE = 0xc1f00000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x73000000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
deleted file mode 100644
@@ -1,2 +0,0 @@
-# currently only NOR flash booting is supported
-CONFIG_SYS_TEXT_BASE = 0x10000000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x73f00000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x00f00000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x00f00000
deleted file mode 100644
@@ -1,3 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x20F00000
-## For testing: load at 0x20100000 and "go" at 0x201000A4
-#CONFIG_SYS_TEXT_BASE = 0x20100000
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xffe00000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23fc0000
deleted file mode 100644
@@ -1,3 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0xa0000000
-
-# PLATFORM_CPPFLAGS += -DDEBUG
deleted file mode 100644
@@ -1,11 +0,0 @@
-#
-# Spectrum Digital DM355 EVM board
-# dm355evm board has 1 bank of 128 MB DDR RAM
-# Physical Address: 8000'0000 to 8800'0000
-#
-# Linux Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-
-#Provide at least 16MB spacing between us and the Linux Kernel image
-CONFIG_SYS_TEXT_BASE = 0x81080000
deleted file mode 100644
@@ -1,6 +0,0 @@
-# Linux Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-
-#Provide at least 16MB spacing between us and the Linux Kernel image
-CONFIG_SYS_TEXT_BASE = 0x81080000
deleted file mode 100644
@@ -1,11 +0,0 @@
-#
-# Spectrum Digital DM365 EVM board
-# DM365 EVM board has 1 bank of 128 MB DDR RAM
-# Physical Address: 8000'0000 to 8800'0000
-#
-# Linux Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-
-#Provide at least 16MB spacing between us and the Linux Kernel image
-CONFIG_SYS_TEXT_BASE = 0x81080000
deleted file mode 100644
@@ -1,2 +0,0 @@
-#Provide at least 16MB spacing between us and the Linux Kernel image
-CONFIG_SYS_TEXT_BASE = 0x81080000
deleted file mode 100644
@@ -1,39 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# (C) Copyright 2003
-# Texas Instruments, <www.ti.com>
-# Swaminathan <swami.iyer@ti.com>
-#
-# Davinci EVM board (ARM925EJS) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# Davinci EVM has 1 bank of 256 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 9000'0000
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# Visioneering Corp. Sonata board (ARM926EJS) cpu
-#
-# Sonata board has 1 bank of 128 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 8800'0000
-#
-# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu
-#
-# Schmoogie board has 1 bank of 128 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 8800'0000
-#
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-# we load ourself to 8108 '0000
-#
-#
-
-#Provide at least 16MB spacing between us and the Linux Kernel image
-CONFIG_SYS_TEXT_BASE = 0x81080000
deleted file mode 100644
@@ -1,39 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# (C) Copyright 2003
-# Texas Instruments, <www.ti.com>
-# Swaminathan <swami.iyer@ti.com>
-#
-# Davinci EVM board (ARM925EJS) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# Davinci EVM has 1 bank of 256 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 9000'0000
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# Visioneering Corp. Sonata board (ARM926EJS) cpu
-#
-# Sonata board has 1 bank of 128 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 8800'0000
-#
-# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu
-#
-# Schmoogie board has 1 bank of 128 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 8800'0000
-#
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-# we load ourself to 8108 '0000
-#
-#
-
-#Provide at least 16MB spacing between us and the Linux Kernel image
-CONFIG_SYS_TEXT_BASE = 0x81080000
deleted file mode 100644
@@ -1,23 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# Copyright (C) 2008 Lyrtech <www.lyrtech.com>
-# Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
-#
-# Lyrtech SFF SDR board (ARM926EJS) cpu
-#
-# SFF SDR board has 1 bank of 128 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 87FF'FFFF
-#
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-# Integrity kernel is expected to be at 8000'0000, entry 8000'00D0,
-# up to 81FF'FFFF (uses up to 32 MB of memory for text, heap, etc).
-#
-# we load ourself to 8400'0000 to provide at least 32MB spacing
-# between us and the Integrity kernel image
-CONFIG_SYS_TEXT_BASE = 0x84000000
deleted file mode 100644
@@ -1,39 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# (C) Copyright 2003
-# Texas Instruments, <www.ti.com>
-# Swaminathan <swami.iyer@ti.com>
-#
-# Davinci EVM board (ARM925EJS) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# Davinci EVM has 1 bank of 256 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 9000'0000
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# Visioneering Corp. Sonata board (ARM926EJS) cpu
-#
-# Sonata board has 1 bank of 128 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 8800'0000
-#
-# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu
-#
-# Schmoogie board has 1 bank of 128 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 8800'0000
-#
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-# we load ourself to 8108 '0000
-#
-#
-
-#Provide at least 16MB spacing between us and the Linux Kernel image
-CONFIG_SYS_TEXT_BASE = 0x81080000
deleted file mode 100644
@@ -1,32 +0,0 @@
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# AMD development board AMD Alchemy DbAu1x00, MIPS32 core
-#
-
-# ROM version
-CONFIG_SYS_TEXT_BASE = 0xbfc00000
-
-# RAM version
-#CONFIG_SYS_TEXT_BASE = 0x80100000
deleted file mode 100644
@@ -1,17 +0,0 @@
-#
-# DNP/1110 board with SA1100 cpu
-#
-# http://www.dilnetpc.com
-#
-
-#
-# DILNETPC has 1 banks of 32 MB DRAM
-#
-# c000'0000
-#
-# Linux-Kernel is expected to be at c000'8000, entry c000'8000
-#
-# we load ourself to c1f8'0000, the upper 1 MB of the first (only) bank
-#
-
-CONFIG_SYS_TEXT_BASE = 0xc1f80000
deleted file mode 100644
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xc0f80000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xffc00000
deleted file mode 100644
@@ -1,9 +0,0 @@
-#
-# board/espt/config.mk
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-CONFIG_SYS_TEXT_BASE = 0x8FFC0000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21F00000
deleted file mode 100644
@@ -1,27 +0,0 @@
-#
-# Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
-# Curt Brune <curt@cucy.com>
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0x007d0000
deleted file mode 100644
@@ -1,35 +0,0 @@
-#
-# (C) Copyright 2009 Faraday Technology
-# Po-Yu Chuang <ratbert@faraday-tech.com>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# Faraday A320 board with FA526/FA626TE/ARM926EJ-S cpus
-#
-# see http://www.faraday-tech.com/ for more information
-
-# A320 has 1 bank of 64 MB DRAM
-#
-# 1000'0000 to 1400'0000
-#
-# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000
-#
-# we load ourself to 13f8'0000
-#
-# download area is 1200'0000
-
-CONFIG_SYS_TEXT_BASE = 0x13f80000
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xffe00000
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFF800000
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xffe00000
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xffe00000
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xffe00000
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xffe00000
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFE00000
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFF800000
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFF800000
deleted file mode 100644
@@ -1,13 +0,0 @@
-#
-# ADS GCPlus board with SA1110 cpu
-#
-# The ADS GCPlus has 2 banks of 16 MiB SDRAM
-#
-# We use the ADS GCPlus Linux boot ROM to load U-Boot into SDRAM
-# at c020'0000 and then move ourself to c8f0'0000. Basically, just
-# install the U-Boot binary as you would the Linux zImage and then
-# reap the benfits of more convenient Linux development cycles, i.e.
-# bootp;tftp;bootm, repeat, etc.,.
-#
-
-CONFIG_SYS_TEXT_BASE = 0xc8f00000
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xff800000
deleted file mode 100644
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xc1780000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x87f00000
deleted file mode 100644
@@ -1,32 +0,0 @@
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# INCA-IP board with MIPS 4Kc CPU core
-#
-
-# ROM version
-CONFIG_SYS_TEXT_BASE = 0xB0000000
-
-# RAM version
-#CONFIG_SYS_TEXT_BASE = 0x80100000
deleted file mode 100644
@@ -1,33 +0,0 @@
-#
-# (C) Copyright 2009
-# ISEE 2007 SL, <www.iseebcn.com>
-#
-# IGEP0020 uses OMAP3 (ARM-CortexA8) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80008000
deleted file mode 100644
@@ -1,34 +0,0 @@
-#
-# (C) Copyright 2009
-# ISEE 2007 SL, <www.iseebcn.com>
-#
-# IGEP0030 uses OMAP3 (ARM-CortexA8) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80008000
-
deleted file mode 100644
@@ -1,2 +0,0 @@
-#
-CONFIG_SYS_TEXT_BASE = 0x00f80000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
deleted file mode 100644
@@ -1,23 +0,0 @@
-#
-# LART board with SA1100 cpu
-#
-# see http://www.lart.tudelft.nl/ for more information on LART
-#
-
-#
-# LART has 4 banks of 8 MB DRAM
-#
-# c000'0000
-# c100'0000
-# c800'0000
-# c900'0000
-#
-# Linux-Kernel is expected to be at c000'8000, entry c000'8000
-#
-# we load ourself to c178'0000, the upper 1 MB of second bank
-#
-# download areas is c800'0000
-#
-
-
-CONFIG_SYS_TEXT_BASE = 0xc1780000
deleted file mode 100644
@@ -1,30 +0,0 @@
-#
-# Author: Vaibhav Hiremath <hvaibhav@ti.com>
-#
-# Based on ti/evm/config.mk
-#
-# Copyright (C) 2010
-# Texas Instruments Incorporated - http://www.ti.com/
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
deleted file mode 100644
@@ -1,5 +0,0 @@
-# with relocation CONFIG_SYS_TEXT_BASE can be anything, and making it 0
-# makes relative and absolute relocation fixups interchangeable.
-#CONFIG_SYS_TEXT_BASE = 0
-
-CONFIG_SYS_TEXT_BASE = 0xc0000000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0xa0000000
deleted file mode 100644
@@ -1,33 +0,0 @@
-#
-# (C) Copyright 2006-2008
-# Texas Instruments, <www.ti.com>
-#
-# Zoom MDK uses OMAP3 (ARM-CortexA8) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
deleted file mode 100644
@@ -1,33 +0,0 @@
-#
-# (C) Copyright 2009
-# Texas Instruments, <www.ti.com>
-#
-# Zoom II uses OMAP3 (ARM-CortexA8) CPU
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# Physical Address:
-# 0x80000000 (bank0)
-# 0xA0000000 (bank1)
-# Linux-Kernel is expected to be at 0x80008000, entry 0x80008000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
deleted file mode 100644
@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#address where u-boot will be relocated
-#CONFIG_SYS_TEXT_BASE = 0x0
-CONFIG_SYS_TEXT_BASE = 0x81500000
deleted file mode 100644
@@ -1,38 +0,0 @@
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# Logic ZOOM LH7A400 SDK board w/Logic LH7A400-10 card engine
-# w/Sharp LH7A400 SoC (ARM920T) cpu
-#
-
-#
-# 32 or 64 MB SDRAM on SDCSC0 @ 0xc0000000
-#
-# Linux-Kernel is @ 0xC0008000, entry 0xc0008000
-# params @ 0xc0000100
-# optionally with a ramdisk at 0xc0300000
-#
-# we load ourself to 0xc1fc0000 (32M - 256K)
-#
-# download area is 0xc0f00000
-#
-
-CONFIG_SYS_TEXT_BASE = 0xc1fc0000
-#CONFIG_SYS_TEXT_BASE = 0x00000000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
deleted file mode 100644
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0x00f00000
-#CROSS_COMPILE = arm-elf-
deleted file mode 100644
@@ -1,3 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x27F00000
-## For testing: load at 0x20100000 and "go" at 0x201000A4
-#CONFIG_SYS_TEXT_BASE = 0x20100000
deleted file mode 100644
@@ -1,24 +0,0 @@
-#
-# (C) Copyright 2002, 2003
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# MPL VCMA9 board with S3C2410X (ARM920T) cpu
-#
-# see http://www.mpl.ch/ for more information about the MPL VCMA9
-#
-
-#
-# MPL VCMA9 has 1 bank of minimal 16 MB DRAM
-# from 0x30000000
-#
-# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
-# optionally with a ramdisk at 3040'0000
-#
-# we load ourself to 33F8'0000
-#
-# download area is 3080'0000
-#
-
-
-#CONFIG_SYS_TEXT_BASE = 0x30F80000
-CONFIG_SYS_TEXT_BASE = 0x33F80000
deleted file mode 100644
@@ -1,37 +0,0 @@
-#
-# Copyright (C) 2007
-# Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
-#
-# Copyright (C) 2007
-# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
-# Copyright (C) 2007
-# Kenati Technologies, Inc.
-#
-# Copyright (C) 2008
-# Mark Jonas <mark.jonas@de.bosch.com>
-#
-# board/mpr2/config.mk
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-CONFIG_SYS_TEXT_BASE = 0x8FFC0000
deleted file mode 100644
@@ -1,34 +0,0 @@
-#
-# Copyright (C) 2007
-# Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
-#
-# Copyright (C) 2007
-# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
-# Copyright (C) 2007
-# Kenati Technologies, Inc.
-#
-# board/ms7720se/config.mk
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-CONFIG_SYS_TEXT_BASE = 0x8FFC0000
deleted file mode 100644
@@ -1,31 +0,0 @@
-#
-# Copyright (C) 2007
-# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
-# Copyright (C) 2007
-# Kenati Technologies, Inc.
-#
-# board/ms7722se/config.mk
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-CONFIG_SYS_TEXT_BASE = 0x8FFC0000
deleted file mode 100644
@@ -1,23 +0,0 @@
-#
-# Copyright (C) 2007
-# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-CONFIG_SYS_TEXT_BASE = 0x8FFC0000
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# board/mx1ads/config.mk
-#
-# (c) Copyright 2004
-# Techware Information Technology, Inc.
-# http://www.techware.com.tw/
-#
-# Ming-Len Wu <minglen_wu@techware.com.tw>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-CONFIG_SYS_TEXT_BASE = 0x08400000
deleted file mode 100644
@@ -1,10 +0,0 @@
-#
-# This config file is used for compilation of IMX sources
-#
-# You might change location of U-Boot in memory by setting right CONFIG_SYS_TEXT_BASE.
-# This allows for example having one copy located at the end of ram and stored
-# in flash device and later on while developing use other location to test
-# the code in RAM device only.
-#
-
-CONFIG_SYS_TEXT_BASE = 0x08f00000
deleted file mode 100644
@@ -1,11 +0,0 @@
-#
-# Linux-Kernel is expected to be at 1000'8000,
-# entry 1000'8000 (mem base + reserved)
-#
-# We load ourself to internal RAM at 2001'2000
-# Check map file when changing CONFIG_SYS_TEXT_BASE.
-# Everything has fit into 192kB internal SRAM!
-#
-
-# XXX CONFIG_SYS_TEXT_BASE = 0x20012000
-CONFIG_SYS_TEXT_BASE = 0x13FC0000
deleted file mode 100644
@@ -1,16 +0,0 @@
-#######################################################################
-#
-# Copyright (C) 2004 by FS Forth-Systeme GmbH.
-# Markus Pietrek <mpietrek@fsforth.de>
-#
-# @TODO
-# Linux-Kernel is expected to be at 0000'8000, entry 0000'8000
-# optionally with a ramdisk at 0080'0000
-#
-# we load ourself to 0078'0000
-#
-# download area is 0060'0000
-#
-
-
-CONFIG_SYS_TEXT_BASE = 0x00780000
deleted file mode 100644
@@ -1,28 +0,0 @@
-#
-# Overo uses OMAP3 (ARM-CortexA8) cpu
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-CONFIG_SYS_TEXT_BASE = 0x80008000
deleted file mode 100644
@@ -1,32 +0,0 @@
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# AMD development board AMD Alchemy Pb1x00, MIPS32 core
-#
-
-# ROM version
-#CONFIG_SYS_TEXT_BASE = 0xbfc00000
-
-# SDRAM version
-CONFIG_SYS_TEXT_BASE = 0x83800000
deleted file mode 100644
@@ -1,2 +0,0 @@
-#
-CONFIG_SYS_TEXT_BASE = 0x01f00000
deleted file mode 100644
@@ -1,32 +0,0 @@
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Purple board with MIPS 5Kc CPU core
-#
-
-# ROM version
-CONFIG_SYS_TEXT_BASE = 0xB0000000
-
-# RAM version
-#CONFIG_SYS_TEXT_BASE = 0x80100000
deleted file mode 100644
@@ -1,10 +0,0 @@
-#
-# Qemu -M mips system emulator
-# See http://fabrice.bellard.free.fr/qemu
-#
-
-# ROM version
-CONFIG_SYS_TEXT_BASE = 0xbfc00000
-
-# RAM version
-#CONFIG_SYS_TEXT_BASE = 0x80001000
deleted file mode 100644
@@ -1,31 +0,0 @@
-#
-# Copyright (C) 2007
-# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
-# Copyright (C) 2007
-# Kenati Technologies, Inc.
-#
-# board/MigoR/config.mk
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-CONFIG_SYS_TEXT_BASE = 0x8FFC0000
deleted file mode 100644
@@ -1,26 +0,0 @@
-#
-# Copyright (C) 2007
-# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-CONFIG_SYS_TEXT_BASE = 0x8FFC0000
deleted file mode 100644
@@ -1,23 +0,0 @@
-#
-# Copyright (C) 2007,2008
-# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-CONFIG_SYS_TEXT_BASE = 0x0FFC0000
deleted file mode 100644
@@ -1,27 +0,0 @@
-#
-# Copyright (C) 2007,2008 Nobuhiro Iwamatsu
-#
-# board/r77870mp/config.mk
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-CONFIG_SYS_TEXT_BASE = 0x0FFC0000
deleted file mode 100644
@@ -1,28 +0,0 @@
-#
-# Copyright (C) 2007,2008 Nobuhiro Iwamatsu
-# Copyright (C) 2008 Renesas Solutions Corp.
-#
-# u-boot/board/rsk7203/config.mk
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-CONFIG_SYS_TEXT_BASE = 0x0C7C0000
deleted file mode 100644
@@ -1,11 +0,0 @@
-#
-# board/sh7763rdp/config.mk
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-CONFIG_SYS_TEXT_BASE = 0x8FFC0000
-
-# PLATFORM_CPPFLAGS += -DCONFIG_MULTIBOOT
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x73f00000
deleted file mode 100644
@@ -1,34 +0,0 @@
-#
-# Copyright (C) 2010 Samsung Electronics
-# Kyungmin Park <kyungmin.park@samsung.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# On S5PC100 we use the 128 MiB OneDRAM bank at
-#
-# 0x30000000 to 0x35000000 (80MiB)
-# 0x38000000 to 0x40000000 (128MiB)
-#
-# On S5PC110 we use the 128 MiB OneDRAM bank at
-#
-# 0x30000000 to 0x35000000 (80MiB)
-# 0x40000000 to 0x50000000 (256MiB)
-#
-CONFIG_SYS_TEXT_BASE = 0x34800000
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-#
-# SAMSUNG board with S3C2400X (ARM920T) CPU
-#
-# see http://www.samsung.com/ for more information on SAMSUNG
-#
-
-#
-# SAMSUNG has 1 bank of 32 MB DRAM
-#
-# 0C00'0000 to 0E00'0000
-#
-# Linux-Kernel is expected to be at 0cf0'0000, entry 0cf0'0000
-# optionally with a ramdisk at 0c80'0000
-#
-# we load ourself to 0CF80000 (must be high enough not to be
-# overwritten by the uncompessing Linux kernel)
-#
-# download area is 0C80'0000
-#
-
-
-CONFIG_SYS_TEXT_BASE = 0x0CF80000
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu
-#
-# see http://www.samsung.com/ for more information on SAMSUNG
-#
-
-#
-# SMDK2410 has 1 bank of 64 MB DRAM
-#
-# 3000'0000 to 3400'0000
-#
-# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
-# optionally with a ramdisk at 3080'0000
-#
-# we load ourself to 33F8'0000
-#
-# download area is 3300'0000
-#
-
-
-CONFIG_SYS_TEXT_BASE = 0x33F80000
deleted file mode 100644
@@ -1,16 +0,0 @@
-#
-# Copyright (C) 2008 # Samsung Elecgtronics
-# Kyungmin Park <kyungmin.park@samsung.com>
-#
-
-# On S5PC100 we use the 128 MiB OneDRAM bank at
-#
-# 0x30000000 to 0x35000000 (80MiB)
-# 0x38000000 to 0x40000000 (128MiB)
-#
-# On S5PC110 we use the 128 MiB OneDRAM bank at
-#
-# 0x30000000 to 0x35000000 (80MiB)
-# 0x40000000 to 0x48000000 (128MiB)
-#
-CONFIG_SYS_TEXT_BASE = 0x34800000
deleted file mode 100644
@@ -1,23 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu
-#
-# see http://www.samsung.com/ for more information on SAMSUNG
-#
-
-#
-# SMDK2410 has 1 bank of 64 MB DRAM
-#
-# 3000'0000 to 3400'0000
-#
-# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
-# optionally with a ramdisk at 3080'0000
-#
-# we load ourself to 33F8'0000
-#
-# download area is 3300'0000
-
-CONFIG_SYS_TEXT_BASE = 0x33F80000
deleted file mode 100644
@@ -1,10 +0,0 @@
-#
-# This config file is used for compilation of scb93328 sources
-#
-# You might change location of U-Boot in memory by setting right CONFIG_SYS_TEXT_BASE.
-# This allows for example having one copy located at the end of ram and stored
-# in flash device and later on while developing use other location to test
-# the code in RAM device only.
-#
-
-CONFIG_SYS_TEXT_BASE = 0x08f00000
deleted file mode 100644
@@ -1,23 +0,0 @@
-#
-# LART board with SA1100 cpu
-#
-# see http://www.lart.tudelft.nl/ for more information on LART
-#
-
-#
-# Tuxscreen has 4 banks of 4 MB DRAM each
-#
-# c000'0000
-# c800'0000
-# d000'0000
-# d800'0000
-#
-# Linux-Kernel is expected to be at c000'8000, entry c000'8000
-#
-# we load ourself to d838'0000, the upper 1 MB of the last (4th) bank
-#
-# download areas is c800'0000
-#
-
-
-CONFIG_SYS_TEXT_BASE = 0xd8380000
deleted file mode 100644
@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#address where u-boot will be relocated
-#CONFIG_SYS_TEXT_BASE = 0x0
-CONFIG_SYS_TEXT_BASE = 0x81500000
deleted file mode 100644
@@ -1,26 +0,0 @@
-# (C) Copyright 2007
-# STMicroelectronics, <www.st.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-#
-# image should be loaded at 0x01000000
-#
-
-CONFIG_SYS_TEXT_BASE = 0x03F80000
deleted file mode 100644
@@ -1,19 +0,0 @@
-#
-# (C) Copyright 2004
-# Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
-#
-# SX1 board with OMAP1510 (ARM925T) cpu
-# see http://www.ti.com/ for more information on Texas Insturments
-#
-# SX1 has 1 bank of 256 MB SDRAM
-# Physical Address:
-# 1000'0000 to 2000'0000
-#
-#
-# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000 (mem base + reserved)
-#
-# we load ourself to 1108'0000
-#
-#
-
-CONFIG_SYS_TEXT_BASE = 0x11080000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x10000000
deleted file mode 100644
@@ -1,30 +0,0 @@
-#
-# (C) Masami Komiya <mkomiya@sonare.it> 2004
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# ROM version
-CONFIG_SYS_TEXT_BASE = 0xBFC00000
-
-# RAM version
-#CONFIG_SYS_TEXT_BASE = 0x80400000
deleted file mode 100644
@@ -1,33 +0,0 @@
-#
-# (C) Copyright 2006
-# Texas Instruments, <www.ti.com>
-#
-# Beagle Board uses OMAP3 (ARM-CortexA8) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80008000
deleted file mode 100644
@@ -1,33 +0,0 @@
-#
-# (C) Copyright 2006 - 2008
-# Texas Instruments, <www.ti.com>
-#
-# EVM uses OMAP3 (ARM-CortexA8) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80008000
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# (C) Copyright 2003
-# Texas Instruments, <www.ti.com>
-# Kshitij Gupta <Kshitij@ti.com>
-#
-# TI Innovator board with OMAP1510 (ARM925T) cpu
-# see http://www.ti.com/ for more information on Texas Insturments
-#
-# Innovator has 1 bank of 256 MB SDRAM
-# Physical Address:
-# 1000'0000 to 2000'0000
-#
-#
-# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000 (mem base + reserved)
-#
-# we load ourself to 1108'0000
-#
-#
-
-
-CONFIG_SYS_TEXT_BASE = 0x11080000
deleted file mode 100644
@@ -1,26 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# (C) Copyright 2003
-# Texas Instruments, <www.ti.com>
-# Kshitij Gupta <Kshitij@ti.com>
-#
-# TI Innovator board with OMAP1610 (ARM925EJS) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# Innovator has 1 bank of 256 MB SDRAM
-# Physical Address:
-# 1000'0000 to 2000'0000
-#
-#
-# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000
-# (mem base + reserved)
-#
-# we load ourself to 1108'0000
-#
-#
-
-
-CONFIG_SYS_TEXT_BASE = 0x11080000
deleted file mode 100644
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2004
-# Texas Instruments, <www.ti.com>
-#
-# TI H4 board with OMAP2420 (ARM1136) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# H4 has 1 bank of 32MB or 64MB mDDR-SDRAM on CS0
-# H4 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1) ES2 will be configurable
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
-
-# Used with full SRAM boot.
-# This is either with a GP system or a signed boot image.
-# easiest, and safest way to go if you can.
-#CONFIG_SYS_TEXT_BASE = 0x40270000
-
-
-# Handy to get symbols to debug ROM version.
-#CONFIG_SYS_TEXT_BASE = 0x0
-#CONFIG_SYS_TEXT_BASE = 0x08000000
-#CONFIG_SYS_TEXT_BASE = 0x04000000
deleted file mode 100644
@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2002-2004
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# (C) Copyright 2003
-# Texas Instruments, <www.ti.com>
-# Kshitij Gupta <Kshitij@ti.com>
-#
-# (C) Copyright 2004
-# Texas Instruments, <www.ti.com>
-# Rishi Bhattacharya <rishi@ti.com>
-#
-# TI OSK board with OMAP5912 (ARM925EJS) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# OSK has 1 bank of 256 MB SDRAM
-# Physical Address:
-# 1000'0000 to 2000'0000
-#
-#
-# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000
-# (mem base + reserved)
-#
-# we load ourself to 1108'0000
-#
-#
-
-
-CONFIG_SYS_TEXT_BASE = 0x11080000
deleted file mode 100644
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# (C) Copyright 2003
-# Texas Instruments, <www.ti.com>
-# Kshitij Gupta <Kshitij@ti.com>
-#
-# TI Perseus 2 board with OMAP720 (ARM925EJS) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# Innovator has 1 bank of 256 MB SDRAM
-# Physical Address:
-# 1000'0000 to 2000'0000
-#
-#
-# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000
-# (mem base + reserved)
-#
-# we load ourself to 1108'0000
-#
-#
-
-CONFIG_SYS_TEXT_BASE = 0x11080000
deleted file mode 100644
@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2006-2009
-# Texas Instruments Incorporated, <www.ti.com>
-#
-# OMAP 4430 SDP
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# SDRAM Address Space:
-# 8000'0000 - 9fff'ffff (512 MB)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-CONFIG_SYS_TEXT_BASE = 0x80e80000
deleted file mode 100644
@@ -1,33 +0,0 @@
-#
-# (C) Copyright 2006-2009
-# Texas Instruments Incorporated, <www.ti.com>
-#
-# OMAP 3430 SDP uses OMAP3 (ARM-CortexA8) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
deleted file mode 100644
@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2006-2009
-# Texas Instruments Incorporated, <www.ti.com>
-#
-# OMAP 4430 SDP
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# SDRAM Address Space:
-# 8000'0000 - 9fff'ffff (512 MB)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-CONFIG_SYS_TEXT_BASE = 0x80e80000
deleted file mode 100644
@@ -1,20 +0,0 @@
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-
-CONFIG_SYS_TEXT_BASE = 0x83FC0000
deleted file mode 100644
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x13FD0000
deleted file mode 100644
@@ -1,4 +0,0 @@
-#CONFIG_SYS_TEXT_BASE = 0x0
-#CONFIG_SYS_TEXT_BASE = 0xa1700000
-#CONFIG_SYS_TEXT_BASE = 0xa3080000
-CONFIG_SYS_TEXT_BASE = 0xa3008000
@@ -33,6 +33,8 @@
#define CONFIG_MCF520x /* define processor family */
#define CONFIG_M5208 /* define processor type */
+#define CONFIG_SYS_TEXT_BASE 0
+
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
@@ -37,6 +37,8 @@
#define CONFIG_MCF52x2 /* define processor family */
#define CONFIG_M5249 /* define processor type */
+#define CONFIG_SYS_TEXT_BASE 0xffe00000
+
#define CONFIG_MCFTMR
#define CONFIG_MCFUART
@@ -28,6 +28,8 @@
#define CONFIG_M5253 /* define processor type */
#define CONFIG_M5253DEMO /* define board type */
+#define CONFIG_SYS_TEXT_BASE 0xFF800000
+
#define CONFIG_MCFTMR
#define CONFIG_MCFUART
@@ -28,6 +28,8 @@
#define CONFIG_M5253 /* define processor type */
#define CONFIG_M5253EVBE /* define board type */
+#define CONFIG_SYS_TEXT_BASE 0xffe00000
+
#define CONFIG_MCFTMR
#define CONFIG_MCFUART
@@ -38,6 +38,8 @@
#define CONFIG_M5271 /* define processor type */
#define CONFIG_M5271EVB /* define board type */
+#define CONFIG_SYS_TEXT_BASE 0xffe00000
+
#define CONFIG_MCFTMR
#define CONFIG_MCFUART
@@ -36,6 +36,8 @@
#define CONFIG_MCF52x2 /* define processor family */
#define CONFIG_M5272 /* define processor type */
+#define CONFIG_SYS_TEXT_BASE 0xffe00000
+
#define CONFIG_MCFTMR
#define CONFIG_MCFUART
@@ -41,6 +41,8 @@
#define CONFIG_M5275 /* define processor type */
#define CONFIG_M5275EVB /* define board type */
+#define CONFIG_SYS_TEXT_BASE 0xffe00000
+
#define CONFIG_MCFTMR
#define CONFIG_MCFUART
@@ -36,6 +36,8 @@
#define CONFIG_MCF52x2 /* define processor family */
#define CONFIG_M5282 /* define processor type */
+#define CONFIG_SYS_TEXT_BASE 0xFFE00000
+
#define CONFIG_MCFTMR
#define CONFIG_MCFUART
@@ -37,6 +37,8 @@
#define CONFIG_MCF5301x /* define processor family */
#define CONFIG_M53015 /* define processor type */
+#define CONFIG_SYS_TEXT_BASE 0
+
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
@@ -37,6 +37,8 @@
#define CONFIG_MCF532x /* define processor family */
#define CONFIG_M5329 /* define processor type */
+#define CONFIG_SYS_TEXT_BASE 0
+
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
@@ -37,6 +37,8 @@
#define CONFIG_MCF532x /* define processor family */
#define CONFIG_M5373 /* define processor type */
+#define CONFIG_SYS_TEXT_BASE 0
+
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
@@ -38,6 +38,8 @@
#define CONFIG_M547x /* define processor type */
#define CONFIG_M5475 /* define processor type */
+#define CONFIG_SYS_TEXT_BASE 0xFF800000
+
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
@@ -38,6 +38,8 @@
#define CONFIG_M548x /* define processor type */
#define CONFIG_M5485 /* define processor type */
+#define CONFIG_SYS_TEXT_BASE 0xFF800000
+
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
@@ -31,6 +31,8 @@
#define CONFIG_CPU_SH7722 1
#define CONFIG_MIGO_R 1
+#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
+
#define CONFIG_CMD_LOADB
#define CONFIG_CMD_LOADS
#define CONFIG_CMD_FLASH
@@ -41,6 +41,8 @@
#define CONFIG_LPC2292
#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
+#define CONFIG_SYS_TEXT_BASE 0x81500000
+
#undef CONFIG_USE_IRQ /* don't need them anymore */
/*
@@ -32,6 +32,8 @@
#define CONFIG_OMAP1510 1 /* which is in a 1510 (helen) */
#define CONFIG_OMAP_SX1 1 /* a SX1 Board */
+#define CONFIG_SYS_TEXT_BASE 0x11080000
+
/* input clock of PLL */
#define CONFIG_SYS_CLK_FREQ 12000000 /* the SX1 has 12MHz input clock */
@@ -41,6 +41,8 @@
#define CONFIG_MCF52x2 /* define processor family */
#define CONFIG_M5249 /* define processor type */
+#define CONFIG_SYS_TEXT_BASE 0xffc00000
+
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
#define CONFIG_MCFTMR
@@ -38,6 +38,8 @@
#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */
#define CONFIG_VCMA9 1 /* on a MPL VCMA9 Board */
+#define CONFIG_SYS_TEXT_BASE 0x33F80000
+
/* input clock of PLL */
#define CONFIG_SYS_CLK_FREQ 12000000/* VCMA9 has 12MHz input clock */
@@ -31,6 +31,8 @@
#undef CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE 0x13f80000
+
/*-----------------------------------------------------------------------
* Timer
*/
@@ -32,6 +32,8 @@
#define CONFIG_SYS_AT91_MAIN_CLOCK 18429952 /* from 18.432 MHz crystal */
#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x21f00000
+
#define CONFIG_AT91SAM9260 1 /* It's an Atmel AT91SAM9260 SoC*/
#define CONFIG_AFEB9260 1 /* on an AFEB9260 Board */
#define CONFIG_ARCH_CPU_INIT
@@ -33,6 +33,8 @@
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
#define CONFIG_OMAP3_AM3517EVM 1 /* working with AM3517EVM */
+#define CONFIG_SYS_TEXT_BASE 0x80e80000
+
#define CONFIG_EMIF4 /* The chip has EMIF4 controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
@@ -32,6 +32,8 @@
#define CONFIG_CPU_SH7723 1
#define CONFIG_AP325RXA 1
+#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
+
#define CONFIG_CMD_LOADB
#define CONFIG_CMD_LOADS
#define CONFIG_CMD_FLASH
@@ -37,6 +37,8 @@
#define CONFIG_APOLLON 1
#define CONFIG_APOLLON_PLUS 1 /* If you have apollon plus 1.x */
+#define CONFIG_SYS_TEXT_BASE 0x83e80000
+
/* Clock config to target*/
#define PRCM_CONFIG_I 1
/* #define PRCM_CONFIG_II 1 */
@@ -36,6 +36,8 @@
*/
#undef CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE 0xc0f80000
+
/*
* High Level Configuration Options
* (easy to change)
@@ -36,6 +36,8 @@
#define CONFIG_SA1110 1 /* This is an SA1100 CPU */
#define CONFIG_ASSABET 1 /* on an Intel Assabet Board */
+#define CONFIG_SYS_TEXT_BASE 0xc1f00000
+
#undef CONFIG_USE_IRQ
/* we will never enable dcache, because we have to setup MMU first */
#define CONFIG_SYS_NO_DCACHE
@@ -33,6 +33,8 @@
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x73000000
+
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#define CONFIG_AT91CAP9 1 /* It's an Atmel AT91CAP9 SoC */
#define CONFIG_AT91CAP9ADK 1 /* on an AT91CAP9ADK Board */
@@ -32,6 +32,8 @@
#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */
/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */
+#define CONFIG_SYS_TEXT_BASE 0x21f00000
+
#define AT91_SLOW_CLOCK 32768 /* slow clock */
#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
@@ -46,6 +46,8 @@
#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)
#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x10000000
+
/* CPU configuration */
#define CONFIG_ARM920T
#define CONFIG_AT91RM9200
@@ -33,6 +33,8 @@
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */
#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x23f00000
+
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#ifdef CONFIG_AT91SAM9G20EK
@@ -33,6 +33,8 @@
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */
#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x23f00000
+
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#ifdef CONFIG_AT91SAM9G10EK
#define CONFIG_AT91SAM9G10 1 /* It's an Atmel AT91SAM9G10 SoC*/
@@ -31,6 +31,8 @@
#define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */
#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x23f00000
+
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#define CONFIG_AT91SAM9263 1 /* It's an Atmel AT91SAM9263 SoC*/
#define CONFIG_AT91SAM9263EK 1 /* on an AT91SAM9263EK Board */
@@ -33,6 +33,8 @@
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x73f00000
+
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#ifdef CONFIG_AT91SAM9M10G45EK
#define CONFIG_AT91SAM9M10G45 1 /* It's an Atmel AT91SAM9M10G45 SoC*/
@@ -33,6 +33,8 @@
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x23f00000
+
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#define CONFIG_AT91SAM9RL 1 /* It's an Atmel AT91SAM9RL SoC*/
#define CONFIG_AT91SAM9RLEK 1 /* on an AT91SAM9RLEK Board */
@@ -31,6 +31,8 @@
#define CONFIG_KS8695 1 /* it is a KS8695 CPU */
#define CONFIG_CM4008 1 /* it is an OpenGear CM4008 boad */
+#define CONFIG_SYS_TEXT_BASE 0x00f00000
+
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
@@ -33,6 +33,8 @@
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+#define CONFIG_SYS_TEXT_BASE 0x00f00000
+
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
@@ -31,6 +31,8 @@
#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK/3) /* peripheral clock */
+#define CONFIG_SYS_TEXT_BASE 0x20F00000
+
#define AT91_SLOW_CLOCK 32768 /* slow clock */
#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
@@ -61,6 +61,8 @@
#define CONFIG_SYS_CLK 66000000
#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */
+#define CONFIG_SYS_TEXT_BASE 0xffe00000
+
/* ---
* Enable use of Ethernet
* ---
@@ -38,6 +38,8 @@
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000
#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x21f00000
+
#define CONFIG_ARM926EJS 1
#if defined(CONFIG_CPU9260_128M) || defined(CONFIG_CPU9260)
@@ -37,6 +37,8 @@
#define AT91_SLOW_CLOCK 32768
+#define CONFIG_SYS_TEXT_BASE 0x21F00000
+
#define CONFIG_ARM920T 1
#define CONFIG_AT91RM9200 1
#define CONFIG_CPUAT91 1
@@ -32,6 +32,8 @@
#define AT91C_MAIN_CLOCK 184320000 /* from 3.6864 MHz crystal (3686400 * 50) */
#define AT91C_MASTER_CLOCK 46080000 /* (AT91C_MAIN_CLOCK/4) peripheral clock */
+#define CONFIG_SYS_TEXT_BASE 0x23fc0000
+
#define AT91_SLOW_CLOCK 32768 /* slow clock */
#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
@@ -28,6 +28,8 @@
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_SYS_TEXT_BASE 0x81080000
+
/* SoC Configuration */
#define CONFIG_ARM926EJS /* arm926ejs CPU */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
@@ -27,6 +27,8 @@
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_SYS_TEXT_BASE 0x81080000
+
/* SoC Configuration */
#define CONFIG_ARM926EJS /* arm926ejs CPU */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
@@ -34,6 +34,8 @@
#define CONFIG_SYS_HZ 1000
#define CONFIG_SOC_DM365
+#define CONFIG_SYS_TEXT_BASE 0x81080000
+
/* Memory Info */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 0x80000000
@@ -32,6 +32,8 @@
#define CONFIG_SYS_HZ 1000
#define CONFIG_SOC_DM646X
+#define CONFIG_SYS_TEXT_BASE 0x81080000
+
/* EEPROM definitions for EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
@@ -60,6 +60,8 @@
#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CONFIG_SYS_HZ 1000
#define CONFIG_SOC_DM644X
+#define CONFIG_SYS_TEXT_BASE 0x81080000
+
/*====================================================*/
/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
@@ -35,6 +35,8 @@
#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CONFIG_SYS_HZ 1000
#define CONFIG_SOC_DM644X
+#define CONFIG_SYS_TEXT_BASE 0x81080000
+
/*=============*/
/* Memory Info */
/*=============*/
@@ -35,6 +35,8 @@
#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CONFIG_SYS_HZ 1000
#define CONFIG_SOC_DM644X
+#define CONFIG_SYS_TEXT_BASE 0x84000000
+
/* EEPROM definitions for Atmel 24LC64 EEPROM chip */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
@@ -60,6 +60,8 @@
#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CONFIG_SYS_HZ 1000
#define CONFIG_SOC_DM644X
+#define CONFIG_SYS_TEXT_BASE 0x81080000
+
/*====================================================*/
/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
@@ -32,6 +32,8 @@
#define CONFIG_DBAU1X00 1
#define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */
+#define CONFIG_SYS_TEXT_BASE 0xbfc00000
+
#ifdef CONFIG_DBAU1000
/* Also known as Merlot */
#define CONFIG_SOC_AU1000 1
@@ -33,6 +33,8 @@
*/
#define CONFIG_SKIP_LOWLEVEL_INIT 1
+#define CONFIG_SYS_TEXT_BASE 0xc1f80000
+
/*
* High Level Configuration Options
* (easy to change)
@@ -45,6 +45,8 @@
#define CONFIG_88F5182 1 /* SOC Name */
#define CONFIG_MACH_EDMINIV2 1 /* Machine type */
+#define CONFIG_SYS_TEXT_BASE 0xfff90000
+
/*
* CLKs configurations
*/
@@ -36,6 +36,8 @@
#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */
#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
+#define CONFIG_SYS_TEXT_BASE 0xc0f80000
+
#undef CONFIG_USE_IRQ /* don't need them anymore */
/*
@@ -32,6 +32,8 @@
#define CONFIG_ESPT 1
#define __LITTLE_ENDIAN 1
+#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
+
/*
* Command line configuration.
*/
@@ -45,6 +45,8 @@
#define CONFIG_EVB4510 1 /* on an EVB4510 Board */
#define CONFIG_SYS_NO_CP15_CACHE
+#define CONFIG_SYS_TEXT_BASE 0x007d0000
+
#define CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ (4*1024)
#define CONFIG_STACKSIZE_FIQ (4*1024)
@@ -47,6 +47,8 @@
#define CONFIG_SA1110 1 /* This is an SA1100 CPU */
#define CONFIG_GCPLUS 1 /* on an ADS GCPlus Board */
+#define CONFIG_SYS_TEXT_BASE 0xc8f00000
+
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
/* we will never enable dcache, because we have to setup MMU first */
#define CONFIG_SYS_NO_DCACHE
@@ -37,6 +37,8 @@
#define CONFIG_M5271 /* define processor type */
#define CONFIG_IDMR /* define board type */
+#define CONFIG_SYS_TEXT_BASE 0xff800000
+
#undef CONFIG_WATCHDOG /* disable watchdog */
/*
@@ -31,6 +31,8 @@
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
#define CONFIG_OMAP3_IGEP0020 1 /* working with IGEP0020 */
+#define CONFIG_SYS_TEXT_BASE 0x80008000
+
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h>
@@ -31,6 +31,8 @@
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
#define CONFIG_OMAP3_IGEP0030 1 /* working with IGEP0030 */
+#define CONFIG_SYS_TEXT_BASE 0x80008000
+
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h>
@@ -38,6 +38,8 @@
#undef CONFIG_USE_IRQ /* don't need them anymore */
+#define CONFIG_SYS_TEXT_BASE 0xc1780000
+
/*
* Size of malloc() pool
*/
@@ -31,6 +31,8 @@
#define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */
#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0xc0000000
+
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_DISPLAY_CPUINFO
@@ -36,6 +36,8 @@
#define CONFIG_MX31_HCLK_FREQ 26000000
#define CONFIG_MX31_CLK32 32000
+#define CONFIG_SYS_TEXT_BASE 0xa0000000
+
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
@@ -34,6 +34,8 @@
#define CONFIG_MX31_HCLK_FREQ 26000000
#define CONFIG_MX31_CLK32 32000
+#define CONFIG_SYS_TEXT_BASE 0x87f00000
+
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
@@ -31,6 +31,8 @@
#define CONFIG_MIPS32 1 /* MIPS 4Kc CPU core */
#define CONFIG_INCA_IP 1 /* on a INCA-IP Board */
+#define CONFIG_SYS_TEXT_BASE 0xB0000000
+
#ifndef CPU_CLOCK_RATE
/* allowed values: 100000000, 133000000, and 150000000 */
#define CPU_CLOCK_RATE 150000000 /* default: 150 MHz clock for the MIPS core */
@@ -40,6 +40,8 @@
#define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */
#define CONFIG_SYS_TIMERBASE 0x13000100 /* Timer1 */
+#define CONFIG_SYS_TEXT_BASE 0x01000000
+
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */
@@ -41,6 +41,8 @@
#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */
#define CONFIG_SYS_TIMERBASE 0x13000100
+#define CONFIG_SYS_TEXT_BASE 0x01000000
+
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */
@@ -33,6 +33,8 @@
#define CONFIG_IXP425 1 /* This is an IXP425 CPU */
#define CONFIG_IXDP425 1 /* on an IXDP425 Board */
+#define CONFIG_SYS_TEXT_BASE 0x00f80000
+
#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */
#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */
@@ -33,6 +33,8 @@
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+#define CONFIG_SYS_TEXT_BASE 0x10000000
+
/*
* Environment settings
*/
@@ -37,6 +37,8 @@
#define AT91_SLOW_CLOCK 32768 /* slow clock */
+#define CONFIG_SYS_TEXT_BASE 0x21f00000
+
#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
/* Only define one of the following, based on board type */
@@ -34,6 +34,8 @@
#define CONFIG_SA1100 1 /* This is an SA1100 CPU */
#define CONFIG_LART 1 /* on an LART Board */
+#define CONFIG_SYS_TEXT_BASE 0xc1780000
+
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
/* we will never enable dcache, because we have to setup MMU first */
#define CONFIG_SYS_NO_DCACHE
@@ -41,6 +41,8 @@
#define CONFIG_LPC2292
#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
+#define CONFIG_SYS_TEXT_BASE 0x81500000
+
#undef CONFIG_USE_IRQ /* don't need them anymore */
/*
@@ -30,6 +30,8 @@
#define CONFIG_LH7A40X 1 /* Sharp LH7A40x SoC family */
#define CONFIG_LH7A400 1 /* Sharp LH7A400 S0C */
+#define CONFIG_SYS_TEXT_BASE 0xc1fc0000
+
/* The system clock PLL input frequency */
#define CONFIG_SYS_CLK_FREQ 14745600 /* System Clock PLL Input (Hz) */
@@ -34,6 +34,8 @@
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
+#define CONFIG_SYS_TEXT_BASE 0xc1fc0000
+
/*
* Size of malloc() pool
*/
@@ -30,6 +30,8 @@
#define CONFIG_LH7A40X 1 /* Sharp LH7A40x SoC family */
#define CONFIG_LH7A404 1 /* Sharp LH7A404 SoC */
+#define CONFIG_SYS_TEXT_BASE 0xc1fc0000
+
/* The system clock PLL input frequency */
#define CONFIG_SYS_CLK_FREQ 14745600 /* System Clock PLL Input (Hz) */
@@ -34,6 +34,8 @@
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
+#define CONFIG_SYS_TEXT_BASE 0xc1fc0000
+
/*
* Size of malloc() pool
*/
@@ -36,6 +36,8 @@
#define AT91C_MASTER_CLOCK 59904000
#define AT91_SLOW_CLOCK 32768 /* slow clock */
+#define CONFIG_SYS_TEXT_BASE 0x21f00000
+
#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
@@ -37,6 +37,8 @@
#define CONFIG_AT91SAM9263 1 /* It's an AT91SAM9263 SoC */
#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */
#define CONFIG_SYS_HZ 1000 /* decrementer freq */
+#define CONFIG_SYS_TEXT_BASE 0x21f00000
+
#define CONFIG_DISPLAY_BOARDINFO 1
#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info and speed */
#define CONFIG_PREBOOT /* enable preboot variable */
@@ -40,6 +40,8 @@
#define CONFIG_MODNET50 1 /* on an ModNET50 Board */
+#define CONFIG_SYS_TEXT_BASE 0x00f00000
+
#undef CONFIG_USE_IRQ /* don't need them anymore */
/*
@@ -36,6 +36,8 @@
#define AT91_SLOW_CLOCK 32768 /* slow clock */
+#define CONFIG_SYS_TEXT_BASE 0x27F00000
+
#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
@@ -26,6 +26,8 @@
#ifndef __MPR2_H
#define __MPR2_H
+#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
+
/* Supported commands */
#define CONFIG_CMD_SAVEENV
#define CONFIG_CMD_CACHE
@@ -30,6 +30,8 @@
#define CONFIG_CPU_SH7720 1
#define CONFIG_MS7720SE 1
+#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
+
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_SAVEENV
#define CONFIG_CMD_SDRAM
@@ -30,6 +30,8 @@
#define CONFIG_CPU_SH7722 1
#define CONFIG_MS7722SE 1
+#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
+
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_NET
@@ -33,6 +33,8 @@
#define CONFIG_MS7750SE 1
#define __LITTLE_ENDIAN__ 1
+#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
+
/*
* Command line configuration.
*/
@@ -37,6 +37,8 @@
#define CONFIG_MX1ADS 1 /* on a Motorola MX1ADS Board */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+#define CONFIG_SYS_TEXT_BASE 0x08400000
+
/*
* Select serial console configuration
*/
@@ -25,6 +25,8 @@
#define CONFIG_MX1FS2 1 /* on a mx1fs2 board */
#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */
+#define CONFIG_SYS_TEXT_BASE 0x08f00000
+
/*
* Select serial console configuration
*/
@@ -31,6 +31,8 @@
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP1510 1 /* which is in a 5910 */
+#define CONFIG_SYS_TEXT_BASE 0x13FC0000
+
/* Input clock of PLL */
#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz */
#define CONFIG_XTAL_FREQ 12000000 /* 12MHz */
@@ -33,6 +33,8 @@
#define CONFIG_NOMADIK_8815 /* cpu variant */
#define CONFIG_NOMADIK_NHK8815 /* board variant */
+#define CONFIG_SYS_TEXT_BASE 0x03F80000
+
#define CONFIG_SKIP_LOWLEVEL_INIT /* we have already been loaded to RAM */
/* commands */
@@ -35,6 +35,8 @@
#define CONFIG_NS9750 1 /* in an NetSilicon NS9750 SoC */
#define CONFIG_NS9750DEV 1 /* on an NetSilicon NS9750 DevBoard */
+#define CONFIG_SYS_TEXT_BASE 0x00780000
+
/* input clock of PLL */
#define CONFIG_SYS_CLK_FREQ 324403200 /* Don't use PLL. SW11-4 off */
@@ -35,6 +35,8 @@
#define CONFIG_OMAP1510 1 /* which is in a 1510 (helen) */
#define CONFIG_INNOVATOROMAP1510 1 /* a Innovator Board */
+#define CONFIG_SYS_TEXT_BASE 0x11080000
+
/* input clock of PLL */
#define CONFIG_SYS_CLK_FREQ 12000000 /* the OMAP1510 Innovator has 12MHz input clock */
@@ -36,6 +36,8 @@
#define CONFIG_INNOVATOROMAP1610 1 /* a Innovator Board */
#define CONFIG_MACH_OMAP_INNOVATOR /* Select board mach-type */
+#define CONFIG_SYS_TEXT_BASE 0x11080000
+
/* input clock of PLL */
/* the OMAP1610 Innovator has 12MHz input clock */
#define CONFIG_SYS_CLK_FREQ 12000000
@@ -38,6 +38,8 @@
/*#define CONFIG_APTIX 1 #* define if on APTIX test chip */
/*#define CONFIG_VIRTIO 1 #* Using Virtio simulator */
+#define CONFIG_SYS_TEXT_BASE 0x80e80000
+
/* Clock config to target*/
#define PRCM_CONFIG_II 1
/* #define PRCM_CONFIG_III 1 */
@@ -37,6 +37,8 @@
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
#define CONFIG_OMAP3_BEAGLE 1 /* working with BEAGLE */
+#define CONFIG_SYS_TEXT_BASE 0x80008000
+
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
@@ -42,6 +42,8 @@
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
#define CONFIG_OMAP3_EVM 1 /* working with EVM */
+#define CONFIG_SYS_TEXT_BASE 0x80008000
+
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
@@ -29,6 +29,8 @@
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
#define CONFIG_OMAP3_OVERO 1 /* working with overo */
+#define CONFIG_SYS_TEXT_BASE 0x80008000
+
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
@@ -42,6 +42,8 @@
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
#define CONFIG_OMAP3_3430SDP 1 /* working with SDP Rev2 */
+#define CONFIG_SYS_TEXT_BASE 0x80e80000
+
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
@@ -38,6 +38,8 @@
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
#define CONFIG_OMAP3_ZOOM1 1 /* working with Zoom MDK Rev1 */
+#define CONFIG_SYS_TEXT_BASE 0x80e80000
+
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
@@ -39,6 +39,8 @@
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
#define CONFIG_OMAP3_ZOOM2 1 /* working with Zoom II */
+#define CONFIG_SYS_TEXT_BASE 0x80e80000
+
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
@@ -37,6 +37,8 @@
#define CONFIG_PANDA 1 /* working with Panda */
#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_SYS_TEXT_BASE 0x80e80000
+
/* Get CPU defs */
#include <asm/arch/cpu.h>
#include <asm/arch/omap4.h>
@@ -38,6 +38,8 @@
#define CONFIG_4430SDP 1 /* working with SDP */
#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_SYS_TEXT_BASE 0x80e80000
+
/* Get CPU defs */
#include <asm/arch/cpu.h>
#include <asm/arch/omap4.h>
@@ -35,6 +35,8 @@
#define CONFIG_OMAP1610 1 /* 5912 is same as 1610 */
#define CONFIG_OSK_OMAP5912 1 /* a OSK Board */
+#define CONFIG_SYS_TEXT_BASE 0x11080000
+
#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */
#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */
@@ -40,6 +40,8 @@
#define CONFIG_OMAP730 1 /* which is in a 730 */
#define CONFIG_P2_OMAP730 1 /* a Perseus 2 Board */
+#define CONFIG_SYS_TEXT_BASE 0x11080000
+
/*
* Input clock of PLL
* The OMAP730 Perseus 2 has 13MHz input clock
@@ -37,6 +37,8 @@
#define CONFIG_AT91SAM9263 1 /* It's an AT91SAM9263 SoC */
#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */
#define CONFIG_SYS_HZ 1000 /* decrementer freq */
+#define CONFIG_SYS_TEXT_BASE 0x23f00000
+
#define CONFIG_DISPLAY_BOARDINFO 1
#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info and speed */
#define CONFIG_PREBOOT /* enable preboot variable */
@@ -32,6 +32,8 @@
#define CONFIG_PB1X00 1
#define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */
+#define CONFIG_SYS_TEXT_BASE 0x83800000
+
#ifdef CONFIG_PB1000
#define CONFIG_SOC_AU1000 1
#else
@@ -33,6 +33,8 @@
#define CONFIG_IXP425 1 /* This is an IXP425 CPU */
#define CONFIG_PDNB3 1 /* on an PDNB3 board */
+#define CONFIG_SYS_TEXT_BASE 0x01f00000
+
#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */
#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */
@@ -39,6 +39,8 @@
#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x23f00000
+
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#define CONFIG_AT91SAM9263 1 /* It's an Atmel AT91SAM9263 SoC*/
#define CONFIG_PM9263 1 /* on a Ronetix PM9263 Board */
@@ -40,6 +40,8 @@
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x73f00000
+
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
@@ -34,6 +34,8 @@
#define CPU_CLOCK_RATE 125000000 /* 125 MHz clock for the MIPS core */
#define ASC_CLOCK_RATE 62500000 /* 62.5 MHz ASC clock */
+#define CONFIG_SYS_TEXT_BASE 0xB0000000
+
#define INFINEON_EBU_BOOTCFG 0xE0CC
#define CONFIG_STACKSIZE (128 * 1024)
@@ -32,6 +32,8 @@
#define CONFIG_QEMU_MIPS 1
#define CONFIG_MISC_INIT_R
+#define CONFIG_SYS_TEXT_BASE 0xbfc00000
+
/*IP address is default used by Qemu*/
#define CONFIG_IPADDR 10.0.2.15 /* Our IP address */
#define CONFIG_SERVERIP 10.0.2.2 /* Server IP address */
@@ -31,6 +31,8 @@
#define CONFIG_MX31_HCLK_FREQ 26000000 /* 26MHz */
#define CONFIG_MX31_CLK32 32768
+#define CONFIG_SYS_TEXT_BASE 0xa0000000
+
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
@@ -10,6 +10,8 @@
#define CONFIG_R2DPLUS 1
#define __LITTLE_ENDIAN__ 1
+#define CONFIG_SYS_TEXT_BASE 0x0FFC0000
+
/*
* Command line configuration.
*/
@@ -34,6 +34,8 @@
#define CONFIG_SYS_R7780MP_OLD_FLASH 1
#define __LITTLE_ENDIAN__ 1
+#define CONFIG_SYS_TEXT_BASE 0x0FFC0000
+
/*
* Command line configuration.
*/
@@ -33,6 +33,8 @@
#define CONFIG_CPU_SH7203 1
#define CONFIG_RSK7203 1
+#define CONFIG_SYS_TEXT_BASE 0x0C7C0000
+
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
@@ -34,6 +34,8 @@
#define CONFIG_S5PC110 1 /* which is in a S5PC110 */
#define CONFIG_MACH_GONI 1 /* working with Goni */
+#define CONFIG_SYS_TEXT_BASE 0x34800000
+
#include <asm/arch/cpu.h> /* get chip and board defs */
#define CONFIG_ARCH_CPU_INIT
@@ -39,6 +39,8 @@
*/
#undef CONFIG_SKIP_LOWLEVEL_INIT /* undef for developing */
+#define CONFIG_SYS_TEXT_BASE 0x33F80000
+
/*
* High Level Configuration Options
* (easy to change)
@@ -44,6 +44,8 @@
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12.000 MHz crystal */
#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x23f00000
+
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#define CONFIG_ARCH_CPU_INIT
@@ -29,6 +29,8 @@
#define CONFIG_SCB9328 1 /* on a scb9328tronix board */
#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */
+#define CONFIG_SYS_TEXT_BASE 0x08f00000
+
#define CONFIG_IMX_SERIAL
#define CONFIG_IMX_SERIAL1
/*
@@ -32,6 +32,8 @@
#define CONFIG_SH7763RDP 1
#define __LITTLE_ENDIAN 1
+#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
+
/*
* Command line configuration.
*/
@@ -35,6 +35,8 @@
#define CONFIG_INFERNO /* we are using the inferno bootldr */
#define CONFIG_SKIP_LOWLEVEL_INIT 1
+#define CONFIG_SYS_TEXT_BASE 0xd8380000
+
/*
* High Level Configuration Options
* (easy to change)
@@ -39,6 +39,8 @@
#define CONFIG_S3C2400 1 /* specifically a SAMSUNG S3C2400 SoC */
#define CONFIG_SMDK2400 1 /* on an SAMSUNG SMDK2400 Board */
+#define CONFIG_SYS_TEXT_BASE 0x0CF80000
+
/* input clock of PLL */
#define CONFIG_SYS_CLK_FREQ 12000000 /* SMDK2400 has 12 MHz input clock */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
@@ -38,6 +38,8 @@
#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */
#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */
+#define CONFIG_SYS_TEXT_BASE 0x33F80000
+
/* input clock of PLL */
#define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */
@@ -38,6 +38,8 @@
#define CONFIG_S5PC100 1 /* which is in a S5PC100 */
#define CONFIG_SMDKC100 1 /* working with SMDKC100 */
+#define CONFIG_SYS_TEXT_BASE 0x34800000
+
#include <asm/arch/cpu.h> /* get chip and board defs */
#define CONFIG_ARCH_CPU_INIT
@@ -28,6 +28,8 @@
#define CONFIG_MIPS32 1 /* MIPS 4Kc CPU core */
#define CONFIG_TB0229 1 /* on a TB0229 Board */
+#define CONFIG_SYS_TEXT_BASE 0xBFC00000
+
#ifndef CPU_CLOCK_RATE
#define CPU_CLOCK_RATE 200000000 /* 200 MHz clock for the MIPS core */
#endif
@@ -28,6 +28,8 @@
#include <asm/arch/hardware.h>
#include <asm/arch/clock.h>
+#define CONFIG_SYS_TEXT_BASE 0x83FC0000
+
/* Architecture, CPU, etc */
#define CONFIG_ARM1176
#define CONFIG_TNETV107X
@@ -54,6 +54,8 @@
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x23f00000
+
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#define CONFIG_ARCH_CPU_INIT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
@@ -39,6 +39,8 @@
#define CONFIG_VERSATILE 1 /* in Versatile Platform Board */
#define CONFIG_ARCH_VERSATILE 1 /* Specifically, a Versatile */
+#define CONFIG_SYS_TEXT_BASE 0x01000000
+
#ifndef CONFIG_ARCH_VERSATILE_AB /* AB */
#define CONFIG_ARCH_VERSATILE_PB /* Versatile PB is default */
#endif
@@ -30,6 +30,8 @@
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP1510 1 /* which is in a 5910 */
+#define CONFIG_SYS_TEXT_BASE 0x13FD0000
+
/* Input clock of PLL */
#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz */
#define CONFIG_XTAL_FREQ 12000000 /* 12MHz */
@@ -38,6 +38,8 @@
#define CONFIG_CPU_PXA320
#define CONFIG_ZYLONITE 1 /* Zylonite board */
+#define CONFIG_SYS_TEXT_BASE 0xa3008000
+
/* #define CONFIG_LCD 1 */
#ifdef CONFIG_LCD
#define CONFIG_SHARP_LM8V31
There is a large number of config.mk files that contain only CONFIG_SYS_TEXT_BASE definitions. Move these definitions to the respective board config files and delete the (now empty) config.mk files. Signed-off-by: Wolfgang Denk <wd@denx.de> --- board/LaCie/edminiv2/config.mk | 28 ----------------------- board/afeb9260/config.mk | 1 - board/apollon/config.mk | 25 -------------------- board/armadillo/config.mk | 29 ----------------------- board/armltd/integrator/config.mk | 5 ---- board/armltd/versatile/config.mk | 5 ---- board/assabet/config.mk | 7 ----- board/atmel/at91cap9adk/config.mk | 1 - board/atmel/at91rm9200dk/config.mk | 1 - board/atmel/at91rm9200ek/config.mk | 2 - board/atmel/at91sam9260ek/config.mk | 1 - board/atmel/at91sam9261ek/config.mk | 1 - board/atmel/at91sam9263ek/config.mk | 1 - board/atmel/at91sam9m10g45ek/config.mk | 1 - board/atmel/at91sam9rlek/config.mk | 1 - board/calao/sbc35_a9g20/config.mk | 1 - board/calao/tny_a9260/config.mk | 1 - board/cm4008/config.mk | 1 - board/cm41xx/config.mk | 1 - board/cmc_pu2/config.mk | 3 -- board/cobra5272/config.mk | 25 -------------------- board/csb637/config.mk | 1 - board/davedenx/qong/config.mk | 3 -- board/davinci/dm355evm/config.mk | 11 --------- board/davinci/dm355leopard/config.mk | 6 ----- board/davinci/dm365evm/config.mk | 11 --------- board/davinci/dm6467evm/config.mk | 2 - board/davinci/dvevm/config.mk | 39 -------------------------------- board/davinci/schmoogie/config.mk | 39 -------------------------------- board/davinci/sffsdr/config.mk | 23 ------------------ board/davinci/sonata/config.mk | 39 -------------------------------- board/dbau1x00/config.mk | 32 -------------------------- board/dnp1110/config.mk | 17 -------------- board/ep7312/config.mk | 28 ----------------------- board/esd/meesc/config.mk | 1 - board/esd/otc570/config.mk | 1 - board/esd/tasreg/config.mk | 25 -------------------- board/espt/config.mk | 9 ------- board/eukrea/cpu9260/config.mk | 1 - board/eukrea/cpuat91/config.mk | 1 - board/evb4510/config.mk | 27 ---------------------- board/faraday/a320evb/config.mk | 35 ---------------------------- board/freescale/m5208evbe/config.mk | 25 -------------------- board/freescale/m5249evb/config.mk | 25 -------------------- board/freescale/m5253demo/config.mk | 25 -------------------- board/freescale/m5253evbe/config.mk | 25 -------------------- board/freescale/m5271evb/config.mk | 25 -------------------- board/freescale/m5272c3/config.mk | 25 -------------------- board/freescale/m5275evb/config.mk | 25 -------------------- board/freescale/m5282evb/config.mk | 25 -------------------- board/freescale/m53017evb/config.mk | 25 -------------------- board/freescale/m5329evb/config.mk | 25 -------------------- board/freescale/m5373evb/config.mk | 25 -------------------- board/freescale/m547xevb/config.mk | 25 -------------------- board/freescale/m548xevb/config.mk | 25 -------------------- board/gcplus/config.mk | 13 ---------- board/idmr/config.mk | 25 -------------------- board/impa7/config.mk | 28 ----------------------- board/imx31_phycore/config.mk | 1 - board/incaip/config.mk | 32 -------------------------- board/isee/igep0020/config.mk | 33 --------------------------- board/isee/igep0030/config.mk | 34 --------------------------- board/ixdp425/config.mk | 2 - board/kb9202/config.mk | 1 - board/lart/config.mk | 23 ------------------ board/logicpd/am3517evm/config.mk | 30 ------------------------ board/logicpd/imx27lite/config.mk | 5 ---- board/logicpd/imx31_litekit/config.mk | 1 - board/logicpd/zoom1/config.mk | 33 --------------------------- board/logicpd/zoom2/config.mk | 33 --------------------------- board/lpc2292sodimm/config.mk | 30 ------------------------ board/lpd7a40x/config.mk | 38 ------------------------------- board/m501sk/config.mk | 1 - board/modnet50/config.mk | 29 ----------------------- board/mp2usb/config.mk | 3 -- board/mpl/vcma9/config.mk | 24 ------------------- board/mpr2/config.mk | 37 ------------------------------ board/ms7720se/config.mk | 34 --------------------------- board/ms7722se/config.mk | 31 ------------------------- board/ms7750se/config.mk | 23 ------------------ board/mx1ads/config.mk | 25 -------------------- board/mx1fs2/config.mk | 10 -------- board/netstar/config.mk | 11 --------- board/ns9750dev/config.mk | 16 ------------- board/overo/config.mk | 28 ----------------------- board/pb1x00/config.mk | 32 -------------------------- board/prodrive/pdnb3/config.mk | 2 - board/purple/config.mk | 32 -------------------------- board/qemu-mips/config.mk | 10 -------- board/renesas/MigoR/config.mk | 31 ------------------------- board/renesas/ap325rxa/config.mk | 26 --------------------- board/renesas/r2dplus/config.mk | 23 ------------------ board/renesas/r7780mp/config.mk | 27 ---------------------- board/renesas/rsk7203/config.mk | 28 ----------------------- board/renesas/sh7763rdp/config.mk | 11 --------- board/ronetix/pm9263/config.mk | 1 - board/ronetix/pm9g45/config.mk | 1 - board/samsung/goni/config.mk | 34 --------------------------- board/samsung/smdk2400/config.mk | 25 -------------------- board/samsung/smdk2410/config.mk | 25 -------------------- board/samsung/smdkc100/config.mk | 16 ------------- board/sbc2410x/config.mk | 23 ------------------ board/scb9328/config.mk | 10 -------- board/shannon/config.mk | 23 ------------------ board/siemens/SMN42/config.mk | 30 ------------------------ board/st/nhk8815/config.mk | 26 --------------------- board/sx1/config.mk | 19 --------------- board/syteco/jadecpu/config.mk | 1 - board/tb0229/config.mk | 30 ------------------------ board/ti/beagle/config.mk | 33 --------------------------- board/ti/evm/config.mk | 33 --------------------------- board/ti/omap1510inn/config.mk | 25 -------------------- board/ti/omap1610inn/config.mk | 26 --------------------- board/ti/omap2420h4/config.mk | 28 ----------------------- board/ti/omap5912osk/config.mk | 30 ------------------------ board/ti/omap730p2/config.mk | 25 -------------------- board/ti/panda/config.mk | 31 ------------------------- board/ti/sdp3430/config.mk | 33 --------------------------- board/ti/sdp4430/config.mk | 31 ------------------------- board/ti/tnetv107xevm/config.mk | 20 ---------------- board/voiceblue/config.mk | 1 - board/zylonite/config.mk | 4 --- include/configs/M5208EVBE.h | 2 + include/configs/M5249EVB.h | 2 + include/configs/M5253DEMO.h | 2 + include/configs/M5253EVBE.h | 2 + include/configs/M5271EVB.h | 2 + include/configs/M5272C3.h | 2 + include/configs/M5275EVB.h | 2 + include/configs/M5282EVB.h | 2 + include/configs/M53017EVB.h | 2 + include/configs/M5329EVB.h | 2 + include/configs/M5373EVB.h | 2 + include/configs/M5475EVB.h | 2 + include/configs/M5485EVB.h | 2 + include/configs/MigoR.h | 2 + include/configs/SMN42.h | 2 + include/configs/SX1.h | 2 + include/configs/TASREG.h | 2 + include/configs/VCMA9.h | 2 + include/configs/a320evb.h | 2 + include/configs/afeb9260.h | 2 + include/configs/am3517_evm.h | 2 + include/configs/ap325rxa.h | 2 + include/configs/apollon.h | 2 + include/configs/armadillo.h | 2 + include/configs/assabet.h | 2 + include/configs/at91cap9adk.h | 2 + include/configs/at91rm9200dk.h | 2 + include/configs/at91rm9200ek.h | 2 + include/configs/at91sam9260ek.h | 2 + include/configs/at91sam9261ek.h | 2 + include/configs/at91sam9263ek.h | 2 + include/configs/at91sam9m10g45ek.h | 2 + include/configs/at91sam9rlek.h | 2 + include/configs/cm4008.h | 2 + include/configs/cm41xx.h | 2 + include/configs/cmc_pu2.h | 2 + include/configs/cobra5272.h | 2 + include/configs/cpu9260.h | 2 + include/configs/cpuat91.h | 2 + include/configs/csb637.h | 2 + include/configs/davinci_dm355evm.h | 2 + include/configs/davinci_dm355leopard.h | 2 + include/configs/davinci_dm365evm.h | 2 + include/configs/davinci_dm6467evm.h | 2 + include/configs/davinci_dvevm.h | 2 + include/configs/davinci_schmoogie.h | 2 + include/configs/davinci_sffsdr.h | 2 + include/configs/davinci_sonata.h | 2 + include/configs/dbau1x00.h | 2 + include/configs/dnp1110.h | 2 + include/configs/edminiv2.h | 2 + include/configs/ep7312.h | 2 + include/configs/espt.h | 2 + include/configs/evb4510.h | 2 + include/configs/gcplus.h | 2 + include/configs/idmr.h | 2 + include/configs/igep0020.h | 2 + include/configs/igep0030.h | 2 + include/configs/impa7.h | 2 + include/configs/imx27lite-common.h | 2 + include/configs/imx31_litekit.h | 2 + include/configs/imx31_phycore.h | 2 + include/configs/incaip.h | 2 + include/configs/integratorap.h | 2 + include/configs/integratorcp.h | 2 + include/configs/ixdp425.h | 2 + include/configs/jadecpu.h | 2 + include/configs/kb9202.h | 2 + include/configs/lart.h | 2 + include/configs/lpc2292sodimm.h | 2 + include/configs/lpd7a400-10.h | 2 + include/configs/lpd7a400.h | 2 + include/configs/lpd7a404-10.h | 2 + include/configs/lpd7a404.h | 2 + include/configs/m501sk.h | 2 + include/configs/meesc.h | 2 + include/configs/modnet50.h | 2 + include/configs/mp2usb.h | 2 + include/configs/mpr2.h | 2 + include/configs/ms7720se.h | 2 + include/configs/ms7722se.h | 2 + include/configs/ms7750se.h | 2 + include/configs/mx1ads.h | 2 + include/configs/mx1fs2.h | 2 + include/configs/netstar.h | 2 + include/configs/nhk8815.h | 2 + include/configs/ns9750dev.h | 2 + include/configs/omap1510inn.h | 2 + include/configs/omap1610inn.h | 2 + include/configs/omap2420h4.h | 2 + include/configs/omap3_beagle.h | 2 + include/configs/omap3_evm.h | 2 + include/configs/omap3_overo.h | 2 + include/configs/omap3_sdp3430.h | 2 + include/configs/omap3_zoom1.h | 2 + include/configs/omap3_zoom2.h | 2 + include/configs/omap4_panda.h | 2 + include/configs/omap4_sdp4430.h | 2 + include/configs/omap5912osk.h | 2 + include/configs/omap730p2.h | 2 + include/configs/otc570.h | 2 + include/configs/pb1x00.h | 2 + include/configs/pdnb3.h | 2 + include/configs/pm9263.h | 2 + include/configs/pm9g45.h | 2 + include/configs/purple.h | 2 + include/configs/qemu-mips.h | 2 + include/configs/qong.h | 2 + include/configs/r2dplus.h | 2 + include/configs/r7780mp.h | 2 + include/configs/rsk7203.h | 2 + include/configs/s5p_goni.h | 2 + include/configs/sbc2410x.h | 2 + include/configs/sbc35_a9g20.h | 2 + include/configs/scb9328.h | 2 + include/configs/sh7763rdp.h | 2 + include/configs/shannon.h | 2 + include/configs/smdk2400.h | 2 + include/configs/smdk2410.h | 2 + include/configs/smdkc100.h | 2 + include/configs/tb0229.h | 2 + include/configs/tnetv107x_evm.h | 2 + include/configs/tny_a9260.h | 2 + include/configs/versatile.h | 2 + include/configs/voiceblue.h | 2 + include/configs/zylonite.h | 2 + 248 files changed, 252 insertions(+), 2257 deletions(-) delete mode 100644 board/LaCie/edminiv2/config.mk delete mode 100644 board/afeb9260/config.mk delete mode 100644 board/apollon/config.mk delete mode 100644 board/armadillo/config.mk delete mode 100644 board/armltd/integrator/config.mk delete mode 100644 board/armltd/versatile/config.mk delete mode 100644 board/assabet/config.mk delete mode 100644 board/atmel/at91cap9adk/config.mk delete mode 100644 board/atmel/at91rm9200dk/config.mk delete mode 100644 board/atmel/at91rm9200ek/config.mk delete mode 100644 board/atmel/at91sam9260ek/config.mk delete mode 100644 board/atmel/at91sam9261ek/config.mk delete mode 100644 board/atmel/at91sam9263ek/config.mk delete mode 100644 board/atmel/at91sam9m10g45ek/config.mk delete mode 100644 board/atmel/at91sam9rlek/config.mk delete mode 100644 board/calao/sbc35_a9g20/config.mk delete mode 100644 board/calao/tny_a9260/config.mk delete mode 100644 board/cm4008/config.mk delete mode 100644 board/cm41xx/config.mk delete mode 100644 board/cmc_pu2/config.mk delete mode 100644 board/cobra5272/config.mk delete mode 100644 board/csb637/config.mk delete mode 100644 board/davedenx/qong/config.mk delete mode 100644 board/davinci/dm355evm/config.mk delete mode 100644 board/davinci/dm355leopard/config.mk delete mode 100644 board/davinci/dm365evm/config.mk delete mode 100644 board/davinci/dm6467evm/config.mk delete mode 100644 board/davinci/dvevm/config.mk delete mode 100644 board/davinci/schmoogie/config.mk delete mode 100644 board/davinci/sffsdr/config.mk delete mode 100644 board/davinci/sonata/config.mk delete mode 100644 board/dbau1x00/config.mk delete mode 100644 board/dnp1110/config.mk delete mode 100644 board/ep7312/config.mk delete mode 100644 board/esd/meesc/config.mk delete mode 100644 board/esd/otc570/config.mk delete mode 100644 board/esd/tasreg/config.mk delete mode 100644 board/espt/config.mk delete mode 100644 board/eukrea/cpu9260/config.mk delete mode 100644 board/eukrea/cpuat91/config.mk delete mode 100644 board/evb4510/config.mk delete mode 100644 board/faraday/a320evb/config.mk delete mode 100644 board/freescale/m5208evbe/config.mk delete mode 100644 board/freescale/m5249evb/config.mk delete mode 100644 board/freescale/m5253demo/config.mk delete mode 100644 board/freescale/m5253evbe/config.mk delete mode 100644 board/freescale/m5271evb/config.mk delete mode 100644 board/freescale/m5272c3/config.mk delete mode 100644 board/freescale/m5275evb/config.mk delete mode 100644 board/freescale/m5282evb/config.mk delete mode 100644 board/freescale/m53017evb/config.mk delete mode 100644 board/freescale/m5329evb/config.mk delete mode 100644 board/freescale/m5373evb/config.mk delete mode 100644 board/freescale/m547xevb/config.mk delete mode 100644 board/freescale/m548xevb/config.mk delete mode 100644 board/gcplus/config.mk delete mode 100644 board/idmr/config.mk delete mode 100644 board/impa7/config.mk delete mode 100644 board/imx31_phycore/config.mk delete mode 100644 board/incaip/config.mk delete mode 100644 board/isee/igep0020/config.mk delete mode 100644 board/isee/igep0030/config.mk delete mode 100644 board/ixdp425/config.mk delete mode 100644 board/kb9202/config.mk delete mode 100644 board/lart/config.mk delete mode 100644 board/logicpd/am3517evm/config.mk delete mode 100644 board/logicpd/imx27lite/config.mk delete mode 100644 board/logicpd/imx31_litekit/config.mk delete mode 100644 board/logicpd/zoom1/config.mk delete mode 100644 board/logicpd/zoom2/config.mk delete mode 100644 board/lpc2292sodimm/config.mk delete mode 100644 board/lpd7a40x/config.mk delete mode 100644 board/m501sk/config.mk delete mode 100644 board/modnet50/config.mk delete mode 100644 board/mp2usb/config.mk delete mode 100644 board/mpl/vcma9/config.mk delete mode 100644 board/mpr2/config.mk delete mode 100644 board/ms7720se/config.mk delete mode 100644 board/ms7722se/config.mk delete mode 100644 board/ms7750se/config.mk delete mode 100644 board/mx1ads/config.mk delete mode 100644 board/mx1fs2/config.mk delete mode 100644 board/netstar/config.mk delete mode 100644 board/ns9750dev/config.mk delete mode 100644 board/overo/config.mk delete mode 100644 board/pb1x00/config.mk delete mode 100644 board/prodrive/pdnb3/config.mk delete mode 100644 board/purple/config.mk delete mode 100644 board/qemu-mips/config.mk delete mode 100644 board/renesas/MigoR/config.mk delete mode 100644 board/renesas/ap325rxa/config.mk delete mode 100644 board/renesas/r2dplus/config.mk delete mode 100644 board/renesas/r7780mp/config.mk delete mode 100644 board/renesas/rsk7203/config.mk delete mode 100644 board/renesas/sh7763rdp/config.mk delete mode 100644 board/ronetix/pm9263/config.mk delete mode 100644 board/ronetix/pm9g45/config.mk delete mode 100644 board/samsung/goni/config.mk delete mode 100644 board/samsung/smdk2400/config.mk delete mode 100644 board/samsung/smdk2410/config.mk delete mode 100644 board/samsung/smdkc100/config.mk delete mode 100644 board/sbc2410x/config.mk delete mode 100644 board/scb9328/config.mk delete mode 100644 board/shannon/config.mk delete mode 100644 board/siemens/SMN42/config.mk delete mode 100644 board/st/nhk8815/config.mk delete mode 100644 board/sx1/config.mk delete mode 100644 board/syteco/jadecpu/config.mk delete mode 100644 board/tb0229/config.mk delete mode 100644 board/ti/beagle/config.mk delete mode 100644 board/ti/evm/config.mk delete mode 100644 board/ti/omap1510inn/config.mk delete mode 100644 board/ti/omap1610inn/config.mk delete mode 100644 board/ti/omap2420h4/config.mk delete mode 100644 board/ti/omap5912osk/config.mk delete mode 100644 board/ti/omap730p2/config.mk delete mode 100644 board/ti/panda/config.mk delete mode 100644 board/ti/sdp3430/config.mk delete mode 100644 board/ti/sdp4430/config.mk delete mode 100644 board/ti/tnetv107xevm/config.mk delete mode 100644 board/voiceblue/config.mk delete mode 100644 board/zylonite/config.mk