Show patches with: Submitter = Pali Rohár       |   960 patches
« 1 2 3 4 … 9 10 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[v2,u-boot] cmd: mmc: Return CMD_RET_* from commands [v2,u-boot] cmd: mmc: Return CMD_RET_* from commands - - 1 - --- 2023-03-22 Pali Rohár Jaehoon Accepted
[u-boot] mmc: Use EXT_CSD_EXTRACT_BOOT_PART() macro for extracting boot part [u-boot] mmc: Use EXT_CSD_EXTRACT_BOOT_PART() macro for extracting boot part - - 1 - --- 2023-03-11 Pali Rohár Jaehoon Accepted
mmc: fsl_esdhc: Fix 'Internal clock never stabilised.' error mmc: fsl_esdhc: Fix 'Internal clock never stabilised.' error - 1 2 - --- 2022-04-29 Pali Rohár Jaehoon Accepted
[v2,2/2] Nokia RX-51: Convert to CONFIG_DM_VIDEO [v2,1/2] video: Allow drivers to allocate the frame buffer themselves - - - - --- 2022-03-09 Pali Rohár ag Accepted
[v2,1/2] video: Allow drivers to allocate the frame buffer themselves [v2,1/2] video: Allow drivers to allocate the frame buffer themselves - - 1 - --- 2022-03-09 Pali Rohár ag Accepted
WIP: Nokia RX-51: Convert to CONFIG_DM_VIDEO WIP: Nokia RX-51: Convert to CONFIG_DM_VIDEO - - - - --- 2022-02-16 Pali Rohár ag Superseded
[v2] usb: xhci-pci: Check for errors from dm_pci_map_bar() [v2] usb: xhci-pci: Check for errors from dm_pci_map_bar() - - 2 - --- 2021-01-18 Pali Rohár bmeng Accepted
usb: xhci-pci: Check for errors from dm_pci_map_bar() usb: xhci-pci: Check for errors from dm_pci_map_bar() - - 2 - --- 2021-01-18 Pali Rohár bmeng Superseded
[v2] powerpc: mpc85xx: Simplify jump to _start_cont in flash code [v2] powerpc: mpc85xx: Simplify jump to _start_cont in flash code - - - - --- 2022-06-28 Pali Rohár freenix Accepted
[v2] board: freescale: p1_p2_rdb_pc: Remove mapping for TDM-PMC card [v2] board: freescale: p1_p2_rdb_pc: Remove mapping for TDM-PMC card - - - - --- 2022-06-23 Pali Rohár freenix Accepted
[v2] board: freescale: p1_p2_rdb_pc: Allow to compile without __SW_BOOT_SD macro [v2] board: freescale: p1_p2_rdb_pc: Allow to compile without __SW_BOOT_SD macro - - - - --- 2022-06-23 Pali Rohár freenix Accepted
[v2] board: freescale: p1_p2_rdb_pc: Allow to compile without BOARD_NAME [v2] board: freescale: p1_p2_rdb_pc: Allow to compile without BOARD_NAME - - - - --- 2022-06-23 Pali Rohár freenix Accepted
[2/2] powerpc: dts: p2020: Remove duplicate pic@40000 node [1/2] powerpc: dts: p2020: Sort DT nodes by their addresses - - - - --- 2022-06-23 Pali Rohár freenix Accepted
[1/2] powerpc: dts: p2020: Sort DT nodes by their addresses [1/2] powerpc: dts: p2020: Sort DT nodes by their addresses - - - - --- 2022-06-23 Pali Rohár freenix Accepted
[v2] mtd: rawnand: fsl_elbc: Fix detection when nand_scan_ident() has not selected ecc.mode [v2] mtd: rawnand: fsl_elbc: Fix detection when nand_scan_ident() has not selected ecc.mode - 1 - - --- 2022-06-20 Pali Rohár freenix Accepted
[v3] powerpc: mpc85xx: Set TEXT_BASE addresses to real base values [v3] powerpc: mpc85xx: Set TEXT_BASE addresses to real base values - - - - --- 2022-06-16 Pali Rohár freenix Accepted
powerpc: bootm: Fix sizes in memory adjusting warning powerpc: bootm: Fix sizes in memory adjusting warning - - - - --- 2022-05-26 Pali Rohár freenix Accepted
[v3] board: freescale: p1_p2_rdb_pc: Move boot reset macros to p1_p2_bootsrc.h [v3] board: freescale: p1_p2_rdb_pc: Move boot reset macros to p1_p2_bootsrc.h - - - - --- 2022-05-26 Pali Rohár freenix Accepted
powerpc: dts: p2020: Define PMC node powerpc: dts: p2020: Define PMC node - - - - --- 2022-05-24 Pali Rohár freenix Accepted
powerpc: Add support for CZ.NIC Turris 1.x routers powerpc: Add support for CZ.NIC Turris 1.x routers - - - - --- 2022-05-16 Pali Rohár freenix Superseded
powerpc: mpc85xx: Simplify jump to _start_cont in flash code powerpc: mpc85xx: Simplify jump to _start_cont in flash code - - - - --- 2022-05-11 Pali Rohár freenix Superseded
[3/3] powerpc: mpc85xx: Fix loading U-Boot proper from SD card in SPL [1/3] mmc: fsl_esdhc_spl: Add support for loading proper U-Boot from unaligned location - - - - --- 2022-05-11 Pali Rohár freenix Superseded
[2/3] mmc: fsl_esdhc_spl: Add support for builds without CONFIG_SYS_MMC_U_BOOT_OFFS [1/3] mmc: fsl_esdhc_spl: Add support for loading proper U-Boot from unaligned location - - - - --- 2022-05-11 Pali Rohár freenix Superseded
[1/3] mmc: fsl_esdhc_spl: Add support for loading proper U-Boot from unaligned location [1/3] mmc: fsl_esdhc_spl: Add support for loading proper U-Boot from unaligned location - - - - --- 2022-05-11 Pali Rohár freenix Superseded
mmc: fsl_esdhc_spl: Fix checking for number of read sectors mmc: fsl_esdhc_spl: Fix checking for number of read sectors - 1 1 - --- 2022-05-11 Pali Rohár freenix Accepted
[2/2] mmc: fsl_esdhc: Add new config option for default fallback mode [1/2] mmc: fsl_esdhc: Set fallback mode to 1-bit - - 1 - --- 2022-05-11 Pali Rohár freenix Accepted
[1/2] mmc: fsl_esdhc: Set fallback mode to 1-bit [1/2] mmc: fsl_esdhc: Set fallback mode to 1-bit - - 1 - --- 2022-05-11 Pali Rohár freenix Accepted
mtd: rawnand: fsl_elbc: Fix detection when nand_scan_ident() has not selected ecc.mode mtd: rawnand: fsl_elbc: Fix detection when nand_scan_ident() has not selected ecc.mode - 1 - - --- 2022-05-11 Pali Rohár freenix Superseded
powerpc: mpc85xx: Set default SYS_IMMR value for P1/P2 CPUs powerpc: mpc85xx: Set default SYS_IMMR value for P1/P2 CPUs - - - - --- 2022-05-02 Pali Rohár freenix Accepted
mtd: rawnand: fsl_elbc: Fix DM support in DTS code path mtd: rawnand: fsl_elbc: Fix DM support in DTS code path - - - - --- 2022-05-02 Pali Rohár freenix Accepted
board: freescale: p1_p2_rdb_pc: Allow to compile without CONFIG_BOARDNAME board: freescale: p1_p2_rdb_pc: Allow to compile without CONFIG_BOARDNAME - - - - --- 2022-05-02 Pali Rohár freenix Superseded
powerpc: mmu: Fix FSL_BOOKE_MAS2() macro powerpc: mmu: Fix FSL_BOOKE_MAS2() macro - 1 - - --- 2022-05-01 Pali Rohár freenix Accepted
powerpc: fsl_law: Add definition for first PCIe target interface powerpc: fsl_law: Add definition for first PCIe target interface - - - - --- 2022-05-01 Pali Rohár freenix Accepted
[3/3] board: freescale: p1_p2_rdb_pc: Implement board_reset() [1/3] board: freescale: p1_p2_rdb_pc: Add workaround for board reset reboot loop - - - - --- 2022-05-01 Pali Rohár freenix Accepted
[2/3] board: freescale: p1_p2_rdb_pc: Add workaround for non-working watchdog [1/3] board: freescale: p1_p2_rdb_pc: Add workaround for board reset reboot loop - - - - --- 2022-05-01 Pali Rohár freenix Superseded
[1/3] board: freescale: p1_p2_rdb_pc: Add workaround for board reset reboot loop [1/3] board: freescale: p1_p2_rdb_pc: Add workaround for board reset reboot loop - - - - --- 2022-05-01 Pali Rohár freenix Superseded
board: freescale: p1_p2_rdb_pc: Enable TDM function only for P1010 board: freescale: p1_p2_rdb_pc: Enable TDM function only for P1010 - - - - --- 2022-05-01 Pali Rohár freenix Accepted
board: freescale: p1_p2_rdb_pc: Allow to compile without __SW_BOOT_SD macro board: freescale: p1_p2_rdb_pc: Allow to compile without __SW_BOOT_SD macro - - - - --- 2022-04-28 Pali Rohár freenix Superseded
powerpc: mpc85xx: Fix compilation with CONFIG_WDT powerpc: mpc85xx: Fix compilation with CONFIG_WDT - - - - --- 2022-04-28 Pali Rohár freenix Accepted
board: freescale: p1_p2_rdb_pc: Remove mapping for TDM-PMC card board: freescale: p1_p2_rdb_pc: Remove mapping for TDM-PMC card - - - - --- 2022-04-27 Pali Rohár freenix Superseded
[4/4] powerpc: dts: p2020: Define ecm, memory and guts nodes [1/4] powerpc: dts: p2020: Define MPIC nodes - - - - --- 2022-04-27 Pali Rohár freenix Accepted
[3/4] powerpc: dts: p2020: Define DMA nodes [1/4] powerpc: dts: p2020: Define MPIC nodes - - - - --- 2022-04-27 Pali Rohár freenix Accepted
[2/4] powerpc: dts: p2020: Define crypto node [1/4] powerpc: dts: p2020: Define MPIC nodes - - - - --- 2022-04-27 Pali Rohár freenix Accepted
[1/4] powerpc: dts: p2020: Define MPIC nodes [1/4] powerpc: dts: p2020: Define MPIC nodes - - - - --- 2022-04-27 Pali Rohár freenix Accepted
[v2] board: freescale: p1_p2_rdb_pc: Fix parsing inverted bits from boot input data [v2] board: freescale: p1_p2_rdb_pc: Fix parsing inverted bits from boot input data - - - - --- 2022-04-25 Pali Rohár freenix Superseded
[v2] powerpc: mpc85xx: Set TEXT_BASE addresses to real base values [v2] powerpc: mpc85xx: Set TEXT_BASE addresses to real base values - - - - --- 2022-04-25 Pali Rohár freenix Superseded
[8/8] board: freescale: p1_p2_rdb_pc: Simplify SPL offset macros powerpc: mpc85xx: Fix and cleanup mpc85xx code - - - - --- 2022-04-05 Pali Rohár freenix Superseded
cmd: ubifs: Do not show usage when command fails cmd: ubifs: Do not show usage when command fails - - 2 - --- 2022-08-07 Pali Rohár hs Accepted
ubifs: Allow to silence debug dumps ubifs: Allow to silence debug dumps - - - 1 --- 2022-08-07 Pali Rohár hs Accepted
[2/2] ubifs: Use U-Boot assert() from <log.h> in UBI/UBIFS code [1/2] ubifs: Fix ubifs_assert_cmt_locked() - - - - --- 2022-07-10 Pali Rohár hs Accepted
[1/2] ubifs: Fix ubifs_assert_cmt_locked() [1/2] ubifs: Fix ubifs_assert_cmt_locked() - - - - --- 2022-07-10 Pali Rohár hs Accepted
doc: Add device-tree-bindings for atsha204 and atsha204a doc: Add device-tree-bindings for atsha204 and atsha204a - - 1 - --- 2022-04-28 Pali Rohár hs Accepted
misc: atsha204a: Add support for atsha204 chip misc: atsha204a: Add support for atsha204 chip - - 1 - --- 2022-04-05 Pali Rohár hs Accepted
mtd: rawnand: fsl_elbc: Fix reading address pointer from DT mtd: rawnand: fsl_elbc: Fix reading address pointer from DT - - 1 - --- 2022-08-19 Pali Rohár kabel Accepted
[v2] powerpc: Add support for CZ.NIC Turris 1.x routers [v2] powerpc: Add support for CZ.NIC Turris 1.x routers - - - - --- 2022-08-17 Pali Rohár kabel Changes Requested
mtd: rawnand: fsl_elbc: Remove NAND_NO_SUBPAGE_WRITE flag mtd: rawnand: fsl_elbc: Remove NAND_NO_SUBPAGE_WRITE flag 1 2 1 - --- 2022-08-15 Pali Rohár kabel Accepted
[v3,3/3] mmc: fsl_esdhc_spl: Add support for builds without CONFIG_SYS_MMC_U_BOOT_OFFS [v3,1/3] mmc: fsl_esdhc_spl: Add support for loading proper U-Boot from unaligned location - - 1 - --- 2022-08-05 Pali Rohár kabel Accepted
[v3,2/3] powerpc: mpc85xx: Fix loading U-Boot proper from SD card in SPL [v3,1/3] mmc: fsl_esdhc_spl: Add support for loading proper U-Boot from unaligned location - - - - --- 2022-08-05 Pali Rohár kabel Accepted
[v3,1/3] mmc: fsl_esdhc_spl: Add support for loading proper U-Boot from unaligned location [v3,1/3] mmc: fsl_esdhc_spl: Add support for loading proper U-Boot from unaligned location - - 1 - --- 2022-08-05 Pali Rohár kabel Accepted
Makefile: Unify condition for mpc85xx reset vector Makefile: Unify condition for mpc85xx reset vector - - 1 - --- 2022-08-03 Pali Rohár kabel Accepted
Makefile: Reduce usage of custom mpc85xx u-boot.bin target Makefile: Reduce usage of custom mpc85xx u-boot.bin target - - - - --- 2022-08-03 Pali Rohár kabel Accepted
[2/2] Makefile: Build final mpc85xx non-SPL image in standard file u-boot.bin [1/2] Makefile: Fix dependency for u-boot-with-dtb.bin - - 1 - --- 2022-08-01 Pali Rohár kabel Accepted
[1/2] Makefile: Fix dependency for u-boot-with-dtb.bin [1/2] Makefile: Fix dependency for u-boot-with-dtb.bin - - 2 - --- 2022-08-01 Pali Rohár kabel Accepted
board: freescale: p1_p2_rdb_pc: Delete watchdog max6370 node in load_default mode board: freescale: p1_p2_rdb_pc: Delete watchdog max6370 node in load_default mode - - - - --- 2022-08-01 Pali Rohár kabel Accepted
[v2,4/4] board: freescale: p1_p2_rdb_pc: Turn off watchdog before reset [v2,1/4] board: freescale: p1_p2_rdb_pc: Add workaround for board reset reboot loop - - - - --- 2022-08-01 Pali Rohár kabel Accepted
[v2,3/4] board: freescale: p1_p2_rdb_pc: Avoid usage of CPLD's system reset register [v2,1/4] board: freescale: p1_p2_rdb_pc: Add workaround for board reset reboot loop - 1 - - --- 2022-08-01 Pali Rohár kabel Accepted
[v2,2/4] board: freescale: p1_p2_rdb_pc: Add workaround for non-working watchdog [v2,1/4] board: freescale: p1_p2_rdb_pc: Add workaround for board reset reboot loop - - - - --- 2022-08-01 Pali Rohár kabel Accepted
[v2,1/4] board: freescale: p1_p2_rdb_pc: Add workaround for board reset reboot loop [v2,1/4] board: freescale: p1_p2_rdb_pc: Add workaround for board reset reboot loop - - - - --- 2022-08-01 Pali Rohár kabel Accepted
[v2] board: freescale: p1_p2_rdb_pc: Calculate offsets for eSDHC boot sector [v2] board: freescale: p1_p2_rdb_pc: Calculate offsets for eSDHC boot sector - - - - --- 2022-08-01 Pali Rohár kabel Accepted
[v2] mmc: fsl_esdhc_spl: Add support for loading proper U-Boot from unaligned location [v2] mmc: fsl_esdhc_spl: Add support for loading proper U-Boot from unaligned location - - 1 - --- 2022-06-20 Pali Rohár kabel Superseded
[v2] board: freescale: p1_p2_rdb_pc: Add env commands norlowerboot, norupperboot, sd2boot and defbo… [v2] board: freescale: p1_p2_rdb_pc: Add env commands norlowerboot, norupperboot, sd2boot and defbo… - - - - --- 2022-04-25 Pali Rohár kabel Accepted
Nokia RX-51: Add check for /lib/ld-linux.so.2 in test script Nokia RX-51: Add check for /lib/ld-linux.so.2 in test script - - - - --- 2021-06-18 Pali Rohár lokeshvutla Accepted
[2/2] Nokia RX-51: Load bootmenu also from uSD card [1/2] Nokia RX-51: Add support for booting kernel in zImage format - - - - --- 2021-06-18 Pali Rohár lokeshvutla Accepted
[1/2] Nokia RX-51: Add support for booting kernel in zImage format [1/2] Nokia RX-51: Add support for booting kernel in zImage format - - - - --- 2021-06-18 Pali Rohár lokeshvutla Accepted
[v2] Nokia RX-51: Enable CONFIG_WDT to remove deprecation warning [v2] Nokia RX-51: Enable CONFIG_WDT to remove deprecation warning - - - - --- 2021-03-09 Pali Rohár lokeshvutla Accepted
[v2] Nokia RX-51: Convert to CONFIG_DM_MMC [v2] Nokia RX-51: Convert to CONFIG_DM_MMC - - 1 - --- 2021-01-16 Pali Rohár lokeshvutla Accepted
[v2] Nokia RX-51: Enable usbtty serial console by default [v2] Nokia RX-51: Enable usbtty serial console by default - - - - --- 2020-11-30 Pali Rohár lokeshvutla Superseded
Nokia RX-51: Do not try calling both ext2load and ext4load Nokia RX-51: Do not try calling both ext2load and ext4load 1 - - - --- 2020-11-30 Pali Rohár lokeshvutla Accepted
Nokia RX-51: Add test for U-Boot serial console Nokia RX-51: Add test for U-Boot serial console - - 1 - --- 2020-11-29 Pali Rohár lokeshvutla Accepted
Nokia RX-51: Convert to CONFIG_DM_MMC Nokia RX-51: Convert to CONFIG_DM_MMC - - - - --- 2020-11-21 Pali Rohár lokeshvutla Accepted
Nokia RX-51: Decrease i2c speed to 100000 Nokia RX-51: Decrease i2c speed to 100000 - 1 1 - --- 2020-11-21 Pali Rohár lokeshvutla Accepted
[6/6] mtd: OneNAND: Set MTD type [1/6] Nokia RX-51: Remove old comments from configs/nokia_rx51.h file - - - - --- 2020-10-31 Pali Rohár lokeshvutla Accepted
[5/6] Nokia RX-51: Make onenand working [1/6] Nokia RX-51: Remove old comments from configs/nokia_rx51.h file - - - 1 --- 2020-10-31 Pali Rohár lokeshvutla Accepted
[4/6] Nokia RX-51: Update test script [1/6] Nokia RX-51: Remove old comments from configs/nokia_rx51.h file - - - - --- 2020-10-31 Pali Rohár lokeshvutla Accepted
[3/6] Nokia RX-51: During init disable lp5523 led instead of resetting it [1/6] Nokia RX-51: Remove old comments from configs/nokia_rx51.h file - - - - --- 2020-10-31 Pali Rohár lokeshvutla Accepted
[2/6] Nokia RX-51: Fix crashing in U-Boot mmc function omap_hsmmc_stop_clock() [1/6] Nokia RX-51: Remove old comments from configs/nokia_rx51.h file - - - - --- 2020-10-31 Pali Rohár lokeshvutla Accepted
[1/6] Nokia RX-51: Remove old comments from configs/nokia_rx51.h file [1/6] Nokia RX-51: Remove old comments from configs/nokia_rx51.h file - - - - --- 2020-10-31 Pali Rohár lokeshvutla Accepted
[v2] Nokia RX-51: Convert to CONFIG_DM_I2C [v2] Nokia RX-51: Convert to CONFIG_DM_I2C - - - - --- 2020-10-26 Pali Rohár lokeshvutla Accepted
[2/2] Nokia RX-51: Convert to CONFIG_DM_I2C [1/2] power: twl4030: Add twl4030_i2c_read() function - - - - --- 2020-10-26 Pali Rohár lokeshvutla Superseded
[1/2] power: twl4030: Add twl4030_i2c_read() function [1/2] power: twl4030: Add twl4030_i2c_read() function - - 1 - --- 2020-10-26 Pali Rohár lokeshvutla Accepted
Revert "mmc: disable UHS modes if Vcc cannot be switched on and off" Revert "mmc: disable UHS modes if Vcc cannot be switched on and off" - - - - --- 2020-08-09 Pali Rohár lokeshvutla Superseded
mmc: omap_hsmmc: Set 3.3V for IO voltage on all places mmc: omap_hsmmc: Set 3.3V for IO voltage on all places 1 1 1 - --- 2020-07-03 Pali Rohár lokeshvutla Accepted
Nokia RX-51: Fix checking if serial console was enabled Nokia RX-51: Fix checking if serial console was enabled - - - - --- 2020-05-31 Pali Rohár lokeshvutla Accepted
Nokia RX-51: Add link for u-boot-gen-combined script to README file Nokia RX-51: Add link for u-boot-gen-combined script to README file - - - - --- 2020-05-31 Pali Rohár lokeshvutla Accepted
[v3] Nokia RX-51: Add automated test for running RX-51 build in qemu [v3] Nokia RX-51: Add automated test for running RX-51 build in qemu - - - - --- 2020-05-17 Pali Rohár lokeshvutla Accepted
[v2] Nokia RX-51: Add automated test for running RX-51 build in qemu [v2] Nokia RX-51: Add automated test for running RX-51 build in qemu - - 1 - --- 2020-04-25 Pali Rohár lokeshvutla Superseded
[11/11] Nokia RX-51: Add automated test for running RX-51 build in qemu Fixes for Nokia RX-51 - - - - --- 2020-03-31 Pali Rohár lokeshvutla Superseded
[10/11] Nokia RX-51: Update README.nokia_rx51 Fixes for Nokia RX-51 - - - - --- 2020-03-31 Pali Rohár lokeshvutla Accepted
[09/11] Nokia RX-51: Disable some unused features to decrease size of u-boot binary Fixes for Nokia RX-51 - - - - --- 2020-03-31 Pali Rohár lokeshvutla Accepted
[08/11] Nokia RX-51: Enable CONFIG_CONSOLE_MUX Fixes for Nokia RX-51 - - 1 - --- 2020-03-31 Pali Rohár lokeshvutla Accepted
« 1 2 3 4 … 9 10 »