Show patches with: Submitter = Lukasz Majewski       |    Archived = No       |   816 patches
« 1 2 3 4 … 8 9 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[4/4] config: xea: Add limits for SPL and u-boot proper sizes arm: xea: Provide enhancements for XEA board - - - - --- 2024-03-29 Lukasz Majewski festevam Accepted
[3/4] arm: xea: Add support for reading SoM (CPU) board HW revision arm: xea: Provide enhancements for XEA board - - - - --- 2024-03-29 Lukasz Majewski festevam Accepted
[2/4] arm: spl: Add definition for PHY reset GPIO for XEA HW rev. 2 arm: xea: Provide enhancements for XEA board - - - - --- 2024-03-29 Lukasz Majewski festevam Accepted
[1/4] arm: spl: xea: Remove I2S pins configuration from early initialization arm: xea: Provide enhancements for XEA board - - - - --- 2024-03-29 Lukasz Majewski festevam Accepted
[6/6] config: xea: Add limits for SPL and u-boot proper sizes arm: xea: Provide enhancements for XEA board - - - - --- 2024-03-28 Lukasz Majewski festevam Changes Requested
[5/6] arm: xea: Print information about XEA's SoM HW revision arm: xea: Provide enhancements for XEA board - - - - --- 2024-03-28 Lukasz Majewski festevam Changes Requested
[4/6] config: xea: Enable late board initialization to set revision variable arm: xea: Provide enhancements for XEA board - - - - --- 2024-03-28 Lukasz Majewski festevam Changes Requested
[3/6] arm: spl: Add definition for PHY reset GPIO for XEA HW rev. 2 arm: xea: Provide enhancements for XEA board - - - - --- 2024-03-28 Lukasz Majewski festevam Changes Requested
[2/6] arm: xea: Add support for reading SoM (CPU) and base board HW revision arm: xea: Provide enhancements for XEA board - - - - --- 2024-03-28 Lukasz Majewski festevam Changes Requested
[1/6] arm: spl: xea: Remove I2S pins configuration from early initialization arm: xea: Provide enhancements for XEA board - - - - --- 2024-03-28 Lukasz Majewski festevam Changes Requested
[12/12] arm: env: Add support for booting different HW revisions of XEA boards arm: xea: Provide support for different XEA board HW versions - - - - --- 2024-03-22 Lukasz Majewski festevam Changes Requested
[11/12] arm: xea: Print information about XEA's SoM HW revision arm: xea: Provide support for different XEA board HW versions - - - - --- 2024-03-22 Lukasz Majewski festevam Changes Requested
[10/12] config: xea: Enable late board initialization to set revision variable arm: xea: Provide support for different XEA board HW versions - - - - --- 2024-03-22 Lukasz Majewski festevam Changes Requested
[09/12] arm: config: xea: Enable support for multiple DTBs for XEA board arm: xea: Provide support for different XEA board HW versions - - - - --- 2024-03-22 Lukasz Majewski festevam Changes Requested
[08/12] arm: spl: Add definition for PHY reset GPIO for XEA HW rev. 2 arm: xea: Provide support for different XEA board HW versions - - - - --- 2024-03-22 Lukasz Majewski festevam Changes Requested
[07/12] dts: xea: Add device tree description for XEA HW rev. 2 arm: xea: Provide support for different XEA board HW versions - - - - --- 2024-03-22 Lukasz Majewski festevam Changes Requested
[06/12] arm: xea: Add support for multiple dtbs in u-boot arm: xea: Provide support for different XEA board HW versions - - - - --- 2024-03-22 Lukasz Majewski festevam Changes Requested
[05/12] dts: xea: Remove outdated comment arm: xea: Provide support for different XEA board HW versions - - - - --- 2024-03-22 Lukasz Majewski festevam Changes Requested
[04/12] dts: xea: Move phy-reset-gpios property to version specific DTS file arm: xea: Provide support for different XEA board HW versions - - - - --- 2024-03-22 Lukasz Majewski festevam Changes Requested
[03/12] arm: xea: Rename imx28-xea.dts to imx28-xea-1.dts arm: xea: Provide support for different XEA board HW versions - - - - --- 2024-03-22 Lukasz Majewski festevam Changes Requested
[02/12] arm: xea: Add support for reading SoM (CPU) and base board HW revision arm: xea: Provide support for different XEA board HW versions - - - - --- 2024-03-22 Lukasz Majewski festevam Changes Requested
[01/12] arm: spl: xea: Remove I2S pins configuration from early initialization arm: xea: Provide support for different XEA board HW versions - - - - --- 2024-03-22 Lukasz Majewski festevam Changes Requested
[v3,3/3] arm: xea: Add support for boot image source descriptor in SPL [v3,1/3] arm: xea: Move XEA's environment variables from xea.h to xea.env - - - - --- 2024-01-15 Lukasz Majewski festevam Accepted
[v3,2/3] arm: config: Enable CRC8 support in SPL on imx287 XEA board [v3,1/3] arm: xea: Move XEA's environment variables from xea.h to xea.env - - - - --- 2024-01-15 Lukasz Majewski festevam Accepted
[v3,1/3] arm: xea: Move XEA's environment variables from xea.h to xea.env [v3,1/3] arm: xea: Move XEA's environment variables from xea.h to xea.env - - - - --- 2024-01-15 Lukasz Majewski festevam Accepted
defconfig: xea: Change default spi-nor memory bus to 2 (single binary) defconfig: xea: Change default spi-nor memory bus to 2 (single binary) - - - - --- 2024-01-12 Lukasz Majewski festevam Accepted
[v2,3/3] arm: xea: Add support for boot image source descriptor in SPL [v2,1/3] arm: xea: Move XEA's environment variables from xea.h to xea.env - - - - --- 2024-01-11 Lukasz Majewski festevam Changes Requested
[v2,2/3] arm: config: Enable CRC8 support in SPL on imx287 XEA board [v2,1/3] arm: xea: Move XEA's environment variables from xea.h to xea.env - - - - --- 2024-01-11 Lukasz Majewski festevam Changes Requested
[v2,1/3] arm: xea: Move XEA's environment variables from xea.h to xea.env [v2,1/3] arm: xea: Move XEA's environment variables from xea.h to xea.env - - - - --- 2024-01-11 Lukasz Majewski festevam Changes Requested
[v1,3/3] arm: xea: Add support for boot image source descriptor in SPL [v1,1/3] arm: config: xea: Update environment variables for XEA board (imx287) - - - - --- 2024-01-10 Lukasz Majewski trini Changes Requested
[v1,2/3] arm: config: Enable CRC8 support in SPL on imx287 XEA board [v1,1/3] arm: config: xea: Update environment variables for XEA board (imx287) - - - - --- 2024-01-10 Lukasz Majewski trini Changes Requested
[v1,1/3] arm: config: xea: Update environment variables for XEA board (imx287) [v1,1/3] arm: config: xea: Update environment variables for XEA board (imx287) - - - - --- 2024-01-10 Lukasz Majewski trini Changes Requested
[2/2] config: xea: Disable support for FAT file system [1/2] config: xea: Disable support for boot methods EXTLINUX and VBE - - - - --- 2023-07-12 Lukasz Majewski sbabic Accepted
[1/2] config: xea: Disable support for boot methods EXTLINUX and VBE [1/2] config: xea: Disable support for boot methods EXTLINUX and VBE - - - - --- 2023-07-12 Lukasz Majewski sbabic Accepted
[v1,6/6] net: mv88e61xx: Reset switch PHYs when bootstrapped to !NO_CPU Provide support for mv88e6020 Marvell switch - - 1 - --- 2023-06-01 Lukasz Majewski rfried Changes Requested
[v1,5/6] net: mv88e61xx: Set proper offset when R0_LED/ADDR4 is set on bootstrap Provide support for mv88e6020 Marvell switch - - 1 - --- 2023-06-01 Lukasz Majewski rfried Changes Requested
[v1,4/6] net: mv88e61xx: Directly access the switch chip Provide support for mv88e6020 Marvell switch - - 1 - --- 2023-06-01 Lukasz Majewski rfried Changes Requested
[v1,3/6] net: mv88e61xx: Clear temporary structs before using them in get_phy_id() Provide support for mv88e6020 Marvell switch - - 1 - --- 2023-06-01 Lukasz Majewski rfried Changes Requested
[v1,2/6] net: mv88e61xx: Configure PHY ports to also pass packets between them Provide support for mv88e6020 Marvell switch - - 1 - --- 2023-06-01 Lukasz Majewski rfried Changes Requested
[v1,1/6] net: mv88e61xx: Add support for checking addressing mode Provide support for mv88e6020 Marvell switch - - 1 - --- 2023-06-01 Lukasz Majewski rfried Changes Requested
[v1,16/16] config: xea: Enable DM_SERIAL for the XEA - single binary (SB) u-boot arm: xea: Update i.MX28 XEA board to use DM_SERIAL - - - - --- 2023-05-19 Lukasz Majewski sbabic Accepted
[v1,15/16] config: xea: Enable DM_SERIAL for the XEA (imx287 based) board arm: xea: Update i.MX28 XEA board to use DM_SERIAL - - - - --- 2023-05-19 Lukasz Majewski sbabic Accepted
[v1,14/16] arm: Kconfig: Switch XEA (imx287 based) board to use CONFIG_PL01X_SERIAL arm: xea: Update i.MX28 XEA board to use DM_SERIAL - - - - --- 2023-05-19 Lukasz Majewski sbabic Accepted
[v1,13/16] arm: xea: Call spl_early_init() before DM serial console is enabled in SPL arm: xea: Update i.MX28 XEA board to use DM_SERIAL - - - - --- 2023-05-19 Lukasz Majewski sbabic Accepted
[v1,12/16] arm: mxs: Prevent serial console init when in very early SPL boot code arm: xea: Update i.MX28 XEA board to use DM_SERIAL - - - - --- 2023-05-19 Lukasz Majewski sbabic Accepted
[v1,11/16] serial: pl01x: Modify pending callback to test if transmit FIFO is empty arm: xea: Update i.MX28 XEA board to use DM_SERIAL - - - - --- 2023-05-19 Lukasz Majewski sbabic Accepted
[v1,10/16] serial: pl01x: Prepare the driver to support SPL_OF_PLATDATA arm: xea: Update i.MX28 XEA board to use DM_SERIAL - - - - --- 2023-05-19 Lukasz Majewski sbabic Accepted
[v1,09/16] serial: pl01x: Change OF_CONTROL to OF_REAL arm: xea: Update i.MX28 XEA board to use DM_SERIAL - - - - --- 2023-05-19 Lukasz Majewski sbabic Accepted
[v1,08/16] dts: xea: Disable 'clks' node for xea (imx287) arm: xea: Update i.MX28 XEA board to use DM_SERIAL - - - - --- 2023-05-19 Lukasz Majewski sbabic Accepted
[v1,07/16] dts: xea: Remove clocks property from debug UART on XEA arm: xea: Update i.MX28 XEA board to use DM_SERIAL - - - - --- 2023-05-19 Lukasz Majewski sbabic Accepted
[v1,06/16] dts: xea: Add u-boot specific 'type' property to duart arm: xea: Update i.MX28 XEA board to use DM_SERIAL - - - - --- 2023-05-19 Lukasz Majewski sbabic Accepted
[v1,05/16] dts: xea: Enable debug UART support in XEA's SPL (DM_SERIAL) arm: xea: Update i.MX28 XEA board to use DM_SERIAL - - - - --- 2023-05-19 Lukasz Majewski sbabic Accepted
[v1,04/16] spl: xea: Provide stub DM driver for imx28 clocks arm: xea: Update i.MX28 XEA board to use DM_SERIAL - - - - --- 2023-05-19 Lukasz Majewski sbabic Accepted
[v1,03/16] defconfig: xea: Change default spi-nor memory bus to 2 arm: xea: Update i.MX28 XEA board to use DM_SERIAL - - - - --- 2023-05-19 Lukasz Majewski sbabic Accepted
[v1,02/16] dts: xea: Provide missing FEC required properties (mac0 and reg_fec_3v3) arm: xea: Update i.MX28 XEA board to use DM_SERIAL - - - - --- 2023-05-19 Lukasz Majewski sbabic Accepted
[v1,01/16] dts: xea: Delete not used in u-boot DTS nodes arm: xea: Update i.MX28 XEA board to use DM_SERIAL - - - - --- 2023-05-19 Lukasz Majewski sbabic Accepted
[5/5] arm: config: Adjust imx287 based XEA board PMU configuration [1/5] arm: mxs: Provide Kconfig option to to not use VDD5V as IMX28 PMU source - - - - --- 2023-05-09 Lukasz Majewski sbabic Accepted
[4/5] arm: mxs: Add function to dump PMU registers [1/5] arm: mxs: Provide Kconfig option to to not use VDD5V as IMX28 PMU source - - - - --- 2023-05-09 Lukasz Majewski sbabic Accepted
[3/5] arm: mxs: Provide Kconfig option to not enable 4P2 regulator in IMX28 PMU [1/5] arm: mxs: Provide Kconfig option to to not use VDD5V as IMX28 PMU source - - - - --- 2023-05-09 Lukasz Majewski sbabic Accepted
[2/5] arm: mxs: Provide Kconfig option to disable battery charging at IMX28 PMU [1/5] arm: mxs: Provide Kconfig option to to not use VDD5V as IMX28 PMU source - - - - --- 2023-05-09 Lukasz Majewski sbabic Accepted
[1/5] arm: mxs: Provide Kconfig option to to not use VDD5V as IMX28 PMU source [1/5] arm: mxs: Provide Kconfig option to to not use VDD5V as IMX28 PMU source - - - - --- 2023-05-09 Lukasz Majewski sbabic Accepted
[v2,3/3] defconfig: Enable DM_PMIC and DM PMIC_TPS65217 on AM335x EVM board [v2,1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217 - - 1 - --- 2022-03-12 Lukasz Majewski trini Handled Elsewhere
[v2,2/3] power: pmic: Provide DM_PMIC support for tps65217 driver [v2,1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217 - - 1 - --- 2022-03-12 Lukasz Majewski trini Accepted
[v2,1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217 [v2,1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217 - - 1 - --- 2022-03-12 Lukasz Majewski trini Accepted
arm: Add AM335x based CBC board arm: Add AM335x based CBC board - - - - --- 2022-02-22 Lukasz Majewski trini Changes Requested
[3/3] defconfig: Enable DM_PMIC and DM PMIC_TPS65217 on AM335x EVM board [1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217 - - - - --- 2022-02-22 Lukasz Majewski trini Superseded
[2/3] power: pmic: Provide DM_PMIC support for tps65217 driver [1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217 - - 1 - --- 2022-02-22 Lukasz Majewski trini Superseded
[1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217 [1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217 - - 1 - --- 2022-02-22 Lukasz Majewski trini Changes Requested
[3/3] arm: dts: Add DTS description for MMC2 am33xx devices [1/3] arm: mmc: Add "ti, am335-sdhci" compatible for TI's omap_hsmmc driver - - - - --- 2022-02-18 Lukasz Majewski trini Accepted
[2/3] arm: dts: Add mmc[01] aliases to am33xx.dtsi [1/3] arm: mmc: Add "ti, am335-sdhci" compatible for TI's omap_hsmmc driver - - - - --- 2022-02-18 Lukasz Majewski trini Accepted
[1/3] arm: mmc: Add "ti, am335-sdhci" compatible for TI's omap_hsmmc driver [1/3] arm: mmc: Add "ti, am335-sdhci" compatible for TI's omap_hsmmc driver - - 1 - --- 2022-02-18 Lukasz Majewski trini Accepted
[v2,4/4] arm: dts: Enable support for USB on XEA (imx28) board [v2,1/4] xea: dts: Update the SPI-NOR flash memory partitions description - - - - --- 2021-12-27 Lukasz Majewski sbabic Accepted
[v2,3/4] arm: xea: config: Provide special defconfig for a single binary u-boot [v2,1/4] xea: dts: Update the SPI-NOR flash memory partitions description - - - - --- 2021-12-27 Lukasz Majewski sbabic Awaiting Upstream
[v2,2/4] xea: defconfig: Update defconfig to support mtd partitions r/w by name [v2,1/4] xea: dts: Update the SPI-NOR flash memory partitions description - - - - --- 2021-12-27 Lukasz Majewski sbabic Awaiting Upstream
[v2,1/4] xea: dts: Update the SPI-NOR flash memory partitions description [v2,1/4] xea: dts: Update the SPI-NOR flash memory partitions description - - - - --- 2021-12-27 Lukasz Majewski sbabic Accepted
[v3] arm: xea: Modify board code to generate single binary u-boot [v3] arm: xea: Modify board code to generate single binary u-boot - - - - --- 2021-12-27 Lukasz Majewski sbabic Accepted
[v1,3/3] arm: dts: Enable support for USB on XEA (imx28) board [v1,1/3] arm: xea: Modify board code to generate single binary u-boot - - - - --- 2021-12-22 Lukasz Majewski trini Changes Requested
[v1,2/3] arm: xea: config: Provide special defconfig for a single binary u-boot [v1,1/3] arm: xea: Modify board code to generate single binary u-boot - - - - --- 2021-12-22 Lukasz Majewski trini Changes Requested
[v1,1/3] arm: xea: Modify board code to generate single binary u-boot [v1,1/3] arm: xea: Modify board code to generate single binary u-boot - - - - --- 2021-12-22 Lukasz Majewski trini Changes Requested
[v1,4/4] usb: ehci: dm: Convert i.MX28 ehci code to driver model usb: ehci: Conversion of ehci-mxs driver to support DM (i.MX28) - - - - --- 2021-12-22 Lukasz Majewski marex Accepted
[v1,3/4] usb: ehci: Move common mxs code to separate functions (ehci_hcd_{stop|start}) usb: ehci: Conversion of ehci-mxs driver to support DM (i.MX28) - - - - --- 2021-12-22 Lukasz Majewski marex Accepted
[v1,2/4] usb: ehci: Refactor the ehci_mxs_toggle_clock function to be reused with DM usb: ehci: Conversion of ehci-mxs driver to support DM (i.MX28) - - - - --- 2021-12-22 Lukasz Majewski marex Accepted
[v1,1/4] usb: Modify Kconfig of the USB_EHCI_MXS to use this driver with imx28 usb: ehci: Conversion of ehci-mxs driver to support DM (i.MX28) - - - - --- 2021-12-22 Lukasz Majewski marex Accepted
spl: Provide more space to be used for storing SPL on imx28 OCRAM spl: Provide more space to be used for storing SPL on imx28 OCRAM - - - - --- 2021-12-17 Lukasz Majewski sbabic Accepted
[v2] arm: xea: Modify board code to generate single binary u-boot [v2] arm: xea: Modify board code to generate single binary u-boot - - 1 - --- 2021-10-25 Lukasz Majewski sbabic Superseded
[v1] arm: xea: Modify board code to generate single binary u-boot [v1] arm: xea: Modify board code to generate single binary u-boot - - - - --- 2021-10-23 Lukasz Majewski sbabic Superseded
mxs: power: Change sequence of enabling DCDC switches mxs: power: Change sequence of enabling DCDC switches - - 2 - --- 2021-10-13 Lukasz Majewski sbabic Accepted
[2/2] i2c: pcf8575: Add support for 8 bit I2C IO expanders (like pca8574) [1/2] i2c: pcf8575: Remove not used members of pcf8575_chip structure - - 1 - --- 2021-06-07 Lukasz Majewski trini Accepted
[1/2] i2c: pcf8575: Remove not used members of pcf8575_chip structure [1/2] i2c: pcf8575: Remove not used members of pcf8575_chip structure - - 1 - --- 2021-06-07 Lukasz Majewski trini Accepted
[v1,6/6] net: mv88e61xx: Reset switch PHYs when bootstrapped to !NO_CPU Provide support for mv88e6020 Marvell switch - - 1 - --- 2021-03-17 Lukasz Majewski rfried Accepted
[v1,5/6] net: mv88e61xx: Set proper offset when R0_LED/ADDR4 is set on bootstrap Provide support for mv88e6020 Marvell switch - - 1 - --- 2021-03-17 Lukasz Majewski rfried Accepted
[v1,4/6] net: mv88e61xx: Directly access the switch chip Provide support for mv88e6020 Marvell switch - - 1 - --- 2021-03-17 Lukasz Majewski rfried Accepted
[v1,3/6] net: mv88e61xx: Clear temporary structs before using them in get_phy_id() Provide support for mv88e6020 Marvell switch - - 1 - --- 2021-03-17 Lukasz Majewski rfried Accepted
[v1,2/6] net: mv88e61xx: Configure PHY ports to also pass packets between them Provide support for mv88e6020 Marvell switch - - 1 - --- 2021-03-17 Lukasz Majewski rfried Accepted
[v1,1/6] net: mv88e61xx: Add support for checking addressing mode Provide support for mv88e6020 Marvell switch - - 1 - --- 2021-03-17 Lukasz Majewski rfried Accepted
[v1,3/3] xea: config: Disable CONFIG_SPL_OF_PLATDATA_PARENT on XEA (imx28) arm: xea: Regression fixes for i.MX28 based XEA board - - 1 - --- 2020-12-26 Lukasz Majewski trini Accepted
[v1,2/3] xea: config: Use CONFIG_PREBOOT from Kconfig arm: xea: Regression fixes for i.MX28 based XEA board - - - - --- 2020-12-26 Lukasz Majewski trini Accepted
[v1,1/3] xea: spl: Disable pull UP for GPIO0_2{35} arm: xea: Regression fixes for i.MX28 based XEA board - - - - --- 2020-12-26 Lukasz Majewski trini Accepted
[3/3] defconfig: Enable CONFIG_SHOW_BOOT_PROGRESS for imx53's HSC and DDC devices [1/3] arm: Implement show_boot_progress() for imx53's HSC and DDC devices - - - - --- 2020-09-25 Lukasz Majewski sbabic Awaiting Upstream
[2/3] dts: Provide LED DTS description for HSC and DDC imx53 devices [1/3] arm: Implement show_boot_progress() for imx53's HSC and DDC devices - - - - --- 2020-09-25 Lukasz Majewski sbabic Accepted
« 1 2 3 4 … 8 9 »