Show patches with: Submitter = Otavio Salvador       |   681 patches
« 1 2 3 46 7 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[1/2] mx6ul_14x14_evk: Enable SPL USB and SDP support [1/2] mx6ul_14x14_evk: Enable SPL USB and SDP support - - 1 - --- 2020-06-09 Otavio Salvador sbabic Accepted
[1/2] spl: Avoid printing boot device if silent console is enabled [1/2] spl: Avoid printing boot device if silent console is enabled - - - - --- 2020-09-30 Otavio Salvador trini Accepted
[1/3] mx6ul_14x14_evk: Enable SPL USB and SDP support [1/3] mx6ul_14x14_evk: Enable SPL USB and SDP support - - 1 - --- 2020-06-09 Otavio Salvador sbabic Changes Requested
[1/4] ARM: dts: Activate pullups in the console pins on rv1108-elgin-r1 Fixes for rv1108 and rv1108-elgin-r1 - - 1 - --- 2020-03-13 Otavio Salvador kevery Accepted
[2/2] mx6ul_14x14_evk: Avoid overlap of environment over U-Boot proper [1/2] mx6ul_14x14_evk: Enable SPL USB and SDP support - - 1 - --- 2020-06-09 Otavio Salvador sbabic Accepted
[2/2] spl: Add SPL_SERIAL as requirement for SDP_USB_SDP [1/2] spl: Avoid printing boot device if silent console is enabled - - - - --- 2020-09-30 Otavio Salvador trini Accepted
[2/3] mx6ul_14x14_evk: Enable eMMC boot support [1/3] mx6ul_14x14_evk: Enable SPL USB and SDP support - - - - --- 2020-06-09 Otavio Salvador sbabic Rejected
[2/4] elgin-rv1108: Use rk_board_late_init() for GPIO settings Fixes for rv1108 and rv1108-elgin-r1 - - 1 - --- 2020-03-13 Otavio Salvador kevery Accepted
[3/3] mx6ul_14x14_evk: Change environment offset to overlap with U-Boot [1/3] mx6ul_14x14_evk: Enable SPL USB and SDP support - - 1 - --- 2020-06-09 Otavio Salvador sbabic Changes Requested
[3/4] elgin-rv1108: Avoid adc_channel_single_shot error Fixes for rv1108 and rv1108-elgin-r1 - - 1 - --- 2020-03-13 Otavio Salvador kevery Accepted
[4/4] rv1108: Fix boot regression Fixes for rv1108 and rv1108-elgin-r1 - 1 1 - --- 2020-03-13 Otavio Salvador kevery Accepted
[U-Boot,01/10] mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to CONFIG_SPL_MXS_PSWITCH_WAIT 1 - - - --- 2013-01-30 Otavio Salvador sbabic Changes Requested
[U-Boot,01/11] cgtqmx6eval: Set default environment to use zImage - - - - --- 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,01/13] pico-imx6ul: Convert to distro config [U-Boot,01/13] pico-imx6ul: Convert to distro config - - - - --- 2018-08-30 Otavio Salvador sbabic Superseded
[U-Boot,01/16] mx53loco: Use generic 'load' command instead of 'fatload' 1 - - - --- 2015-07-13 Otavio Salvador sbabic Accepted
[U-Boot,01/16] pico-imx7d: Convert to distro config [U-Boot,01/16] pico-imx7d: Convert to distro config - - - - --- 2018-06-29 Otavio Salvador sbabic Accepted
[U-Boot,02/10] mx23: Document the tRAS lockout setting in memory initialization - - - - --- 2013-01-30 Otavio Salvador sbabic Changes Requested
[U-Boot,02/11] hummingboard: Set default environment to use zImage - - - - --- 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,02/13] pico-imx6ul: Convert to SPL [U-Boot,01/13] pico-imx6ul: Convert to distro config - - - - --- 2018-08-30 Otavio Salvador sbabic Superseded
[U-Boot,02/16] cgtqmx6eval: Use default prompt - - - - --- 2015-07-13 Otavio Salvador sbabic Changes Requested
[U-Boot,02/16] pico-imx7d: Fix common distro configuration behavior [U-Boot,01/16] pico-imx7d: Convert to distro config - - - - --- 2018-06-29 Otavio Salvador sbabic Accepted
[U-Boot,03/10] mx23evk: Adjust DRAM control register to use full 128MB of RAM - - - - --- 2013-01-30 Otavio Salvador sbabic Changes Requested
[U-Boot,03/11] mx23evk: Set default environment to use zImage - - - - --- 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,03/13] pico-imx6ul: Add fastboot support [U-Boot,01/13] pico-imx6ul: Convert to distro config - - - - --- 2018-08-30 Otavio Salvador sbabic Superseded
[U-Boot,03/16] cgtqmx6eval: Use the default CONFIG_SYS_PBSIZE - - - - --- 2015-07-13 Otavio Salvador sbabic Changes Requested
[U-Boot,03/16] pico-imx7d: Add GPT partitioning support [U-Boot,01/16] pico-imx7d: Convert to distro config - - - - --- 2018-06-29 Otavio Salvador sbabic Accepted
[U-Boot,04/10] led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set - - - - --- 2013-01-30 Otavio Salvador sbabic Changes Requested
[U-Boot,04/11] mx28evk: Set default environment to use zImage - - - - --- 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,04/13] pico-imx6ul: Add bmode support [U-Boot,01/13] pico-imx6ul: Convert to distro config - - - - --- 2018-08-30 Otavio Salvador sbabic Superseded
[U-Boot,04/16] cgtqmx6eval: Staticize when possible - - - - --- 2015-07-13 Otavio Salvador sbabic Changes Requested
[U-Boot,04/16] pico-imx7d: Add default DFU targets [U-Boot,01/16] pico-imx7d: Convert to distro config - - - - --- 2018-06-29 Otavio Salvador sbabic Accepted
[U-Boot,05/10] mxs: Fix iomux.h to not break build during assembly stage - - - - --- 2013-01-30 Otavio Salvador sbabic Changes Requested
[U-Boot,05/11] mx51evk: Set default environment to use zImage - - - - --- 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,05/13] pico-imx6ul: Add support for the 512MB module [U-Boot,01/13] pico-imx6ul: Convert to distro config - - - - --- 2018-08-30 Otavio Salvador sbabic Superseded
[U-Boot,05/16] cgtqmx6eval: Improve the error handling - - - - --- 2015-07-13 Otavio Salvador sbabic Changes Requested
[U-Boot,05/16] pico-imx7d: Add fastboot support [U-Boot,01/16] pico-imx7d: Convert to distro config - - - - --- 2018-06-29 Otavio Salvador sbabic Accepted
[U-Boot,06/10] mx23_olinuxino: Add support for status LED - - - - --- 2013-01-30 Otavio Salvador sbabic Changes Requested
[U-Boot,06/11] mx53loco: Set default environment to use zImage - - - - --- 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,06/13] pico-imx7d: Update the README file [U-Boot,01/13] pico-imx6ul: Convert to distro config - - - - --- 2018-08-30 Otavio Salvador sbabic Superseded
[U-Boot,06/16] cgtqmx6eval: Fit into single lines - - - - --- 2015-07-13 Otavio Salvador sbabic Changes Requested
[U-Boot,06/16] pico-imx7d: Add SPL support [U-Boot,01/16] pico-imx7d: Convert to distro config - - - - --- 2018-06-29 Otavio Salvador sbabic Accepted
[U-Boot,07/10] usb: mxs: Disable USB Port 1 for i.MX23 - - - - --- 2013-01-30 Otavio Salvador sbabic Changes Requested
[U-Boot,07/11] mx6qarm2: Set default environment to use zImage - - - - --- 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,07/13] pico-imx6ul: Update the README file [U-Boot,01/13] pico-imx6ul: Convert to distro config - - - - --- 2018-08-30 Otavio Salvador sbabic Superseded
[U-Boot,07/16] cgtqmx6eval: Add ESDHC3 support - - - - --- 2015-07-13 Otavio Salvador sbabic Changes Requested
[U-Boot,07/16] pico-imx7d: Add support for update SPL using DFU [U-Boot,01/16] pico-imx7d: Convert to distro config - - - - --- 2018-06-29 Otavio Salvador sbabic Accepted
[U-Boot,08/10] mx23evk: Enable USB support - - - - --- 2013-01-30 Otavio Salvador sbabic Changes Requested
[U-Boot,08/11] mx6sabre_common: Set default environment to use zImage - - - - --- 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,08/13] pico-imx6ul: Sync defconfig with new changes [U-Boot,01/13] pico-imx6ul: Convert to distro config - - - - --- 2018-08-30 Otavio Salvador sbabic Superseded
[U-Boot,08/16] cgtqmx6eval: Add ESDHC write-protect support - - - - --- 2015-07-13 Otavio Salvador sbabic Changes Requested
[U-Boot,08/16] pico-imx7d: Add bootmenu to choose the baseboard [U-Boot,01/16] pico-imx7d: Convert to distro config - - - - --- 2018-06-29 Otavio Salvador sbabic Accepted
[U-Boot,09/10] mx23_olinuxino: Enable USB support - - - - --- 2013-01-30 Otavio Salvador sbabic Changes Requested
[U-Boot,09/11] mx6slevk: Set default environment to use zImage - - - - --- 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,09/13] pico-imx6ul: Add bootmenu to choose the baseboard [U-Boot,01/13] pico-imx6ul: Convert to distro config - - - - --- 2018-08-30 Otavio Salvador sbabic Superseded
[U-Boot,09/16] cgtqmx6eval: Add SPI NOR flash support - - - - --- 2015-07-13 Otavio Salvador sbabic Changes Requested
[U-Boot,09/16] pico-imx7d: Add Falcon mode support [U-Boot,01/16] pico-imx7d: Convert to distro config - - - - --- 2018-06-29 Otavio Salvador sbabic Accepted
[U-Boot,1/2] MX28: config: Allow different target generation in elftosb call 1 - - - --- 2012-08-15 Otavio Salvador sbabic Changes Requested
[U-Boot,1/2] led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set - - - - --- 2013-01-27 Otavio Salvador Not Applicable
[U-Boot,1/2] mx23_olinuxino: Add default environment - - - - --- 2013-01-23 Otavio Salvador Not Applicable
[U-Boot,1/2] mx25pdk: Use generic filesystem commands [U-Boot,1/2] mx25pdk: Use generic filesystem commands - - - - --- 2017-09-30 Otavio Salvador sbabic Accepted
[U-Boot,1/2] mx28evk: Use 512k for fdt partition to align it - - - - --- 2013-10-03 Otavio Salvador sbabic Superseded
[U-Boot,1/2] mxs: mxsboot: Move sdcard BCB header to 4 sectors offset - - - 2 --- 2013-04-24 Otavio Salvador sbabic Awaiting Upstream
[U-Boot,1/2] patman: Use reverse order for changelog 1 - - - --- 2012-08-18 Otavio Salvador trini Accepted
[U-Boot,1/2] pico-imx6ul, pico-imx7d: Use eMMC user partition by default [U-Boot,1/2] pico-imx6ul, pico-imx7d: Use eMMC user partition by default - - 1 - --- 2018-09-22 Otavio Salvador sbabic Superseded
[U-Boot,1/2] vf610twr: Add default environment in line with other Freescale boards - - - - --- 2013-06-26 Otavio Salvador Changes Requested
[U-Boot,1/2] wandboard: Use 'wandboard' vendor for the Wandboard boards - - - - --- 2013-05-27 Otavio Salvador Superseded
[U-Boot,1/3] cgtqmx6eval: Add fastboot support - - 1 - --- 2015-09-18 Otavio Salvador sbabic Changes Requested
[U-Boot,1/3] cgtqmx6eval: Fit into a single line - - - - --- 2015-09-17 Otavio Salvador sbabic Awaiting Upstream
[U-Boot,1/3] imx: Use a clear identification of an unidentified CPU type - - - - --- 2012-06-17 Otavio Salvador Changes Requested
[U-Boot,1/3] m28evk: use same notation to alloc the 128kB stack - - - - --- 2012-05-15 Otavio Salvador Rejected
[U-Boot,1/3] mx28evk: Use 512k for fdt partition to align it - - - - --- 2013-10-12 Otavio Salvador sbabic Superseded
[U-Boot,1/3] mx53loco: Change default environment to cope with OE changes - - - - --- 2012-09-19 Otavio Salvador sbabic Changes Requested
[U-Boot,1/3] mx6qsabresd: Fix card detection for invalid card id case - - - - --- 2013-03-02 Otavio Salvador sbabic Superseded
[U-Boot,1/3] mx7: Do not call lcdif_power_down() in the SPL case [U-Boot,1/3] mx7: Do not call lcdif_power_down() in the SPL case - - 1 - --- 2018-12-11 Otavio Salvador sbabic Accepted
[U-Boot,1/3] mxs: Replace i.MX233 by i.MX23 on copyright header - - - - --- 2012-08-19 Otavio Salvador sbabic Accepted
[U-Boot,1/3] mxs: Use SoC agnostic configuration option for power switch setting - - - - --- 2013-01-26 Otavio Salvador Not Applicable
[U-Boot,1/3] wandboard: Add card detection for SOM MicroSD card - - - - --- 2013-04-15 Otavio Salvador sbabic Superseded
[U-Boot,1/3] wandboard: Remove hardcoded baudrate from "console" variable [U-Boot,1/3] wandboard: Remove hardcoded baudrate from "console" variable - - - - --- 2018-06-11 Otavio Salvador sbabic Accepted
[U-Boot,1/4] clk_rv1108: Sync with vendor tree Submit upstream changes made while porting a customer board to mainline - - - - --- 2018-11-18 Otavio Salvador ptomsich Superseded
[U-Boot,1/4] clk_rv1108: Sync with vendor tree [U-Boot,1/4] clk_rv1108: Sync with vendor tree - - - - --- 2018-10-27 Otavio Salvador ptomsich Superseded
[U-Boot,1/4] cmd_bootm: fix compilation warning for assigned but never used variable - - - - --- 2012-06-23 Otavio Salvador Rejected
[U-Boot,1/4] mmc: fsl_esdhc: Add CMD11 support to switch to 1.8V - - - - --- 2015-02-16 Otavio Salvador Changes Requested
[U-Boot,1/4] mx6: Remove PAD_CTL_DSE_120ohm from i.MX6DL's IPU1_DI0_PIN4 pin - - - - --- 2013-10-21 Otavio Salvador sbabic Accepted
[U-Boot,1/4] usb: mxs: Disable USB Port 1 for i.MX23 - - - - --- 2013-01-28 Otavio Salvador Not Applicable
[U-Boot,1/4] wandboard: Set fdt based on board_rev and board_name - - - - --- 2017-07-10 Otavio Salvador sbabic Changes Requested
[U-Boot,1/5] ARM: vexpress-ca9x4_defconfig: Enable CMD_UBI support [U-Boot,1/5] ARM: vexpress-ca9x4_defconfig: Enable CMD_UBI support 1 - - - --- 2018-10-23 Otavio Salvador trini Superseded
[U-Boot,1/5] mx6sabre{auto, sd}: Change FDT loading address to avoid overlaping - - - 1 --- 2013-11-01 Otavio Salvador sbabic Changes Requested
[U-Boot,1/5] pico-imx6ul: Add DWARF baseboard support [U-Boot,1/5] pico-imx6ul: Add DWARF baseboard support - - - - --- 2019-09-12 Otavio Salvador sbabic Accepted
[U-Boot,1/5] pico-imx7d: Sync pico-hobbit-imx7d_defconfig [U-Boot,1/5] pico-imx7d: Sync pico-hobbit-imx7d_defconfig - - - - --- 2019-09-12 Otavio Salvador sbabic Accepted
[U-Boot,1/5] spi_sf: Skip the erasing of protected sectors - - - 1 --- 2015-09-02 Otavio Salvador jagan Superseded
[U-Boot,1/6] mx53loco: Change default environment to cope with OE changes - - - - --- 2013-06-28 Otavio Salvador sbabic Awaiting Upstream
[U-Boot,1/6] pico-imx6ul: Fix TechNexion spelling on MAINTAINERS file [U-Boot,1/6] pico-imx6ul: Fix TechNexion spelling on MAINTAINERS file - - - - --- 2018-09-14 Otavio Salvador sbabic Accepted
[U-Boot,1/6] pico-imx6ul: Move dfu_alt_info to CONFIG_DFU_ENV_SETTINGS variable [U-Boot,1/6] pico-imx6ul: Move dfu_alt_info to CONFIG_DFU_ENV_SETTINGS variable - - 1 - --- 2017-11-14 Otavio Salvador sbabic Changes Requested
[U-Boot,1/6] usb: ehci: mx6: Add support for i.MX6SL - - - - --- 2014-06-16 Otavio Salvador sbabic Changes Requested
[U-Boot,1/7] mtd: Fix function description in part_validate comment - - - - --- 2013-09-28 Otavio Salvador Superseded
[U-Boot,1/8] MX28: Fix a typo in mx28_reg_8 macro 1 - - - --- 2012-05-11 Otavio Salvador Awaiting Upstream
[U-Boot,1/8] m28evk: use same notation to alloc the 128kB stack 1 - - - --- 2012-05-12 Otavio Salvador sbabic Awaiting Upstream
[U-Boot,1/9] mx23: Add SSP registers map - - - - --- 2013-01-22 Otavio Salvador Not Applicable
[U-Boot,1/9] mx28evk: We shouldn't hardcode a rootfs filesystem type - - - - --- 2012-12-21 Otavio Salvador sbabic Changes Requested
[U-Boot,10/10] mx23_olinuxino: Add ethernet support - - - - --- 2013-01-30 Otavio Salvador sbabic Changes Requested
« 1 2 3 46 7 »