Show patches with: none      |   178914 patches
« 1 2 ... 1305 1306 13071789 1790 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,v2,4/4] arm: at91: add support for mini-box picosam9g45 board - - - - --- 2015-08-17 Erik van Luijk abiessmann Accepted
[U-Boot,5/5] x86: crownbay: Enable on-board SMSC superio keyboard controller - - 1 - --- 2015-08-17 Bin Meng sjg Superseded
[U-Boot,4/5] video: cfb_console: Allow VGA device to work without i8042 keyboard - - 1 - --- 2015-08-17 Bin Meng sjg Superseded
[U-Boot,3/5] x86: i8042: Clean up the driver 1 - - - --- 2015-08-17 Bin Meng sjg Superseded
[U-Boot,2/5] x86: i8042: Correctly initialize the controller 1 - - - --- 2015-08-17 Bin Meng sjg Superseded
[U-Boot,1/5] x86: superio: Add keyboard controller support to smsc_lpc47m driver - - - - --- 2015-08-17 Bin Meng sjg Superseded
[U-Boot,v2,7/7] sf: Add FSR support to spi_flash_cmd_wait_ready - - - 1 --- 2015-08-17 Jagan Teki jagan Superseded
[U-Boot,v2,6/7] sf: Update status reg check in spi_flash_cmd_wait_ready - - - 1 --- 2015-08-17 Jagan Teki jagan Superseded
[U-Boot,v2,5/7] sf: Make flash->flags use for generic usage - - - - --- 2015-08-17 Jagan Teki jagan Superseded
[U-Boot,v2,4/7] sf: Optimize BAR write code - - - - --- 2015-08-17 Jagan Teki jagan Superseded
[U-Boot,v2,3/7] sf: Make BAR discovery, as spi_flash_read_bar - - - - --- 2015-08-17 Jagan Teki jagan Superseded
[U-Boot,v2,2/7] sf: Return proper bank_sel, if flash->bank_curr == bank_sel - - - - --- 2015-08-17 Jagan Teki jagan Superseded
[U-Boot,v2,1/7] spi: zynq_spi: Remove unneeded headers - - - - --- 2015-08-17 Jagan Teki jagan Superseded
[U-Boot,U-Boot,RESEND,v2,09/10] spi: ti_qspi: Use DMA to read from qspi flash - - 1 - --- 2015-08-17 Raghavendra, Vignesh jagan Accepted
[U-Boot,v2] arm/ls2085a: Add sata support on qds and rdb board - - - - --- 2015-08-17 tang yuantian yorksun Changes Requested
[U-Boot,v2] arm/ls1021a: Add sata support on qds and twr board - - - - --- 2015-08-17 tang yuantian yorksun Changes Requested
[U-Boot] imx: mx6sxsabresd: enable CONFIG_SPL_FAT_SUPPORT - - 1 - --- 2015-08-17 Peng Fan sbabic Awaiting Upstream
[U-Boot,9/9] imx: mx6slevk: add SPL support - - - - --- 2015-08-17 Peng Fan sbabic Awaiting Upstream
[U-Boot,8/9] imx: mx6: ddr: add LPDDR2 support - - - - --- 2015-08-17 Peng Fan sbabic Awaiting Upstream
[U-Boot,7/9] imx: mx6: ddr init MMDC according to ddr_type - - 1 - --- 2015-08-17 Peng Fan sbabic Awaiting Upstream
[U-Boot,6/9] imx: mx6: ddr add an entry ddr_type for mx6_ddr_sysinfo - - - - --- 2015-08-17 Peng Fan sbabic Awaiting Upstream
[U-Boot,5/9] imx: mx6: ddr add mpzqlp2ctl entry - - - - --- 2015-08-17 Peng Fan sbabic Awaiting Upstream
[U-Boot,4/9] imx: mx6: ddr add dram io configuration and header file for i.MX6SL - - - - --- 2015-08-17 Peng Fan sbabic Awaiting Upstream
[U-Boot,3/9] imx: mx6: ddr correct tRFC and tXS - - 1 - --- 2015-08-17 Peng Fan sbabic Awaiting Upstream
[U-Boot,2/9] imx: mx6: ddr no support MMDC1 for i.MX6SL - - 1 - --- 2015-08-17 Peng Fan sbabic Awaiting Upstream
[U-Boot,1/9] imx: mx6: ddr add more register entry for mmdc_p_regs - - 1 - --- 2015-08-17 Peng Fan sbabic Awaiting Upstream
[U-Boot,U-Boot,RESEND,v2,10/10] ARM: dra7xx_evm: Enable EDMA3 in SPL to support DMA on qspi - - 1 - --- 2015-08-17 Raghavendra, Vignesh jagan Accepted
[U-Boot,U-Boot,RESEND,v2,09/10] spi: ti_qspi: Use DMA to read from qspi flash - - 1 - --- 2015-08-17 Raghavendra, Vignesh jagan Superseded
[U-Boot,U-Boot,RESEND,v2,08/10] dma: ti-edma3: Add helper function to support edma3 transfer - - 1 - --- 2015-08-17 Raghavendra, Vignesh jagan Accepted
[U-Boot,U-Boot,RESEND,v2,07/10] sf: ops: Add spi_flash_copy_mmap function - - 1 - --- 2015-08-17 Raghavendra, Vignesh jagan Accepted
[U-Boot,U-Boot,RESEND,v2,06/10] ARM: AM43XX: Add functions to enable and disable EDMA3 clocks - - 2 - --- 2015-08-17 Raghavendra, Vignesh jagan Accepted
[U-Boot,U-Boot,RESEND,v2,05/10] ARM: OMAP5: Add functions to enable and disable EDMA3 clocks - - 1 - --- 2015-08-17 Raghavendra, Vignesh jagan Accepted
[U-Boot,U-Boot,RESEND,v2,04/10] ARM: OMAP5: Add support for disabling clocks in uboot - - 1 - --- 2015-08-17 Raghavendra, Vignesh jagan Accepted
[U-Boot,U-Boot,RESEND,v2,03/10] ARM: AM43xx: Add support for disabling clocks in uboot - - 1 - --- 2015-08-17 Raghavendra, Vignesh jagan Accepted
[U-Boot,U-Boot,RESEND,v2,02/10] env: use cache line aligned memory for flash read - - 1 - --- 2015-08-17 Raghavendra, Vignesh jagan Accepted
[U-Boot,U-Boot,RESEND,v2,01/10] sf: allocate cache aligned buffers to copy from flash - - 2 - --- 2015-08-17 Raghavendra, Vignesh jagan Accepted
[U-Boot] Remove odroid_xu3.h.rej - - - - --- 2015-08-17 Masahiro Yamada Not Applicable
[U-Boot] e1000: support 64bit physical address - - - - --- 2015-08-17 Mingkai Hu jhersh Superseded
[U-Boot] arm: delete unnecessary file - - - - --- 2015-08-17 Minkyu Kang trini Not Applicable
[U-Boot,9/9] imx: mx6slevk: add SPL support - - - - --- 2015-08-17 Peng Fan sbabic Superseded
[U-Boot,8/9] imx: mx6: ddr: add LPDDR2 support - - - - --- 2015-08-17 Peng Fan sbabic Superseded
[U-Boot,7/9] imx: mx6: ddr init MMDC according to ddr_type - - 1 - --- 2015-08-17 Peng Fan sbabic Superseded
[U-Boot,6/9] imx: mx6: ddr add an entry ddr_type for mx6_ddr_sysinfo - - - - --- 2015-08-17 Peng Fan sbabic Superseded
[U-Boot,5/9] imx: mx6: ddr add mpzqlp2ctl entry - - - - --- 2015-08-17 Peng Fan sbabic Superseded
[U-Boot,4/9] imx: mx6: ddr add dram io configuration and header file for i.MX6SL - - - - --- 2015-08-17 Peng Fan sbabic Superseded
[U-Boot,3/9] imx: mx6: ddr correct tRFC and tXS - - - - --- 2015-08-17 Peng Fan sbabic Superseded
[U-Boot,2/9] imx: mx6: ddr no support MMDC1 for i.MX6SL - - - - --- 2015-08-17 Peng Fan sbabic Superseded
[U-Boot,1/9] imx: mx6: ddr add more register entry for mmdc_p_regs - - - - --- 2015-08-17 Peng Fan sbabic Superseded
[U-Boot,8/8] rockchip: Update todo in README.rockchip 1 - - - --- 2015-08-16 Sjoerd Simons sjg Superseded
[U-Boot,7/8] rockchip: Drop first 32kb of zeros from the rksd image type 1 - - - --- 2015-08-16 Sjoerd Simons sjg Superseded
[U-Boot,6/8] arm: Turn of d-cache before i-cache - - 1 - --- 2015-08-16 Sjoerd Simons sjg Superseded
[U-Boot,5/8] rockchip: Add config_distro_bootcmd support 1 - - - --- 2015-08-16 Sjoerd Simons sjg Superseded
[U-Boot,4/8] rockchip: Turn off CONFIG_SPL_LED_SUPPORT for firefly 1 - - - --- 2015-08-16 Sjoerd Simons sjg Superseded
[U-Boot,3/8] rockchip: Disable sdio mmc slot on rk3288-firefly 1 - - - --- 2015-08-16 Sjoerd Simons sjg Superseded
[U-Boot,2/8] mmc: Probe DM based mmc devices in u-boot - - - - --- 2015-08-16 Sjoerd Simons sjg Superseded
[U-Boot,1/8] doc: Fix reference to Rock pro when Rock 2 is meant 1 - - - --- 2015-08-16 Sjoerd Simons sjg Superseded
[U-Boot] ARM: davinci: remove support for CAM ENC 4xx 1 - - - --- 2015-08-16 Masahiro Yamada trini Superseded
[U-Boot,3/3] sunxi: Add CONFIG_MMC0_CD_PIN to various boards 1 - - - --- 2015-08-16 Hans de Goede jwrdegoede Accepted
[U-Boot,2/3] sunxi: Drop LCD_MODE from A13-OLinuxIno defconfigs 1 - - - --- 2015-08-16 Hans de Goede jwrdegoede Accepted
[U-Boot,1/3] sunxi: musb: Drop no longer accurate comment in Kconfig help text 1 - - - --- 2015-08-16 Hans de Goede jwrdegoede Accepted
[U-Boot,6/6] sf: Update spi_flash_cmd_wait_ready - - - 1 --- 2015-08-16 Jagan Teki jagan Superseded
[U-Boot,5/6] sf: Make flash->flags use for generic usage - - - - --- 2015-08-16 Jagan Teki jagan Superseded
[U-Boot,4/6] sf: Optimize BAR write code - - - - --- 2015-08-16 Jagan Teki jagan Superseded
[U-Boot,3/6] sf: Make BAR discovery, as spi_flash_read_bar - - - - --- 2015-08-16 Jagan Teki jagan Superseded
[U-Boot,2/6] sf: Return proper bank_sel, if flash->bank_curr == bank_sel - - - - --- 2015-08-16 Jagan Teki jagan Superseded
[U-Boot,1/6] spi: zynq_spi: Remove unneeded headers - - - - --- 2015-08-16 Jagan Teki jagan Superseded
[U-Boot,v4,3/3] x86: Add DSDT table for supporting ACPI on QEMU - - - - --- 2015-08-16 Saket Sinha sjg Superseded
[U-Boot,v4,2/3] x86: Add ACPI table support to QEMU - - - - --- 2015-08-16 Saket Sinha sjg Superseded
[U-Boot,v4,1/3] x86: Generate a valid ACPI table - - - - --- 2015-08-16 Saket Sinha sjg Superseded
[U-Boot,11/11] arm: pxa: colibri_pxa270: add optional i2c support - - - - --- 2015-08-16 Marcel Ziswiler marex Accepted
[U-Boot,10/11] arm: pxa: colibri_pxa270: add optional lcd support - - - - --- 2015-08-16 Marcel Ziswiler marex Accepted
[U-Boot,09/11] arm: pxa: colibri_pxa270: add some more nor flash details - - - - --- 2015-08-16 Marcel Ziswiler marex Accepted
[U-Boot,08/11] arm: pxa: palmtreo680: get rid of obsolete CONFIG_SYS_LCD_PXA_NO_L_BIAS - - - - --- 2015-08-16 Marcel Ziswiler marex Accepted
[U-Boot,07/11] arm: pxa: colibri_pxa270: fix boot hang - - - - --- 2015-08-16 Marcel Ziswiler marex Accepted
[U-Boot,06/11] lcd: pxa: clean-up include file order - - - - --- 2015-08-16 Marcel Ziswiler marex Accepted
[U-Boot,05/11] usb: pxa27x_udc: clean-up include file order - - - - --- 2015-08-16 Marcel Ziswiler marex Accepted
[U-Boot,04/11] serial: pxa: clean-up include file order - - - - --- 2015-08-16 Marcel Ziswiler marex Accepted
[U-Boot,03/11] arm: tegra: mmc: clean-up include file order - - - - --- 2015-08-16 Marcel Ziswiler marex Accepted
[U-Boot,02/11] arm: pxa: mmc: clean-up include file order - - - - --- 2015-08-16 Marcel Ziswiler marex Accepted
[U-Boot,01/11] arm: pxa: clean-up include file order - - - - --- 2015-08-16 Marcel Ziswiler marex Accepted
[U-Boot] arm: mxs: fix mac address of second interface - - - - --- 2015-08-15 Michael Heimpold sbabic Changes Requested
[U-Boot,v2,7/7] x86: ifdtool: Drop microcode from the device tree when collating - - 1 1 --- 2015-08-15 Simon Glass sjg Accepted
[U-Boot,v2,6/7] x86: ifdtool: Support collating microcode into one place - - 1 1 --- 2015-08-15 Simon Glass sjg Accepted
[U-Boot,v2,5/7] x86: ifdtool: Split microcode linking into its own function - - 1 1 --- 2015-08-15 Simon Glass sjg Accepted
[U-Boot,v2,4/7] x86: ifdtool: Check that U-Boot does not overlap other regions - - 1 1 --- 2015-08-15 Simon Glass sjg Accepted
[U-Boot,v2,3/7] x86: baytrail: Support multiple microcode copies - - - - --- 2015-08-15 Simon Glass sjg Accepted
[U-Boot,v2,2/7] x86: baytrail: Add microcode for BayTrail-I D0 stepping - - - - --- 2015-08-15 Simon Glass sjg Accepted
[U-Boot,v2,1/7] x86: Correct microcode documentation - - 1 - --- 2015-08-15 Simon Glass sjg Accepted
[U-Boot] Drop include/configs/odroid_xu3.h.rej - - - - --- 2015-08-15 Simon Glass Not Applicable
[U-Boot,15/15] sunxi_nand_spl: Add support for backup boot partitions 1 - - - --- 2015-08-15 Hans de Goede jwrdegoede Accepted
[U-Boot,14/15] sunxi_nand_spl: Auto detect nand configuration parameters 1 - - - --- 2015-08-15 Hans de Goede jwrdegoede Accepted
[U-Boot,13/15] sunxi_nand_spl: Parametrize lowlevel read functions 1 - - - --- 2015-08-15 Hans de Goede jwrdegoede Accepted
[U-Boot,12/15] sunxi_nand_spl: Properly config page-size in the nand ctl register 1 - - - --- 2015-08-15 Hans de Goede jwrdegoede Accepted
[U-Boot,11/15] sunxi_nand_spl: Add support for sun4i and sun5i SoCs - - - - --- 2015-08-15 Hans de Goede jwrdegoede Accepted
[U-Boot,10/15] sunxi_nand_spl: Remove NAND_SUNXI_SPL_SYNDROME_PARTITIONS_END - - - - --- 2015-08-15 Hans de Goede jwrdegoede Accepted
[U-Boot,09/15] sunxi_nand_spl: Use kernel driver algorithm for determining ecc_mode / _off - - - - --- 2015-08-15 Hans de Goede jwrdegoede Accepted
[U-Boot,08/15] sunxi_nand_spl: Add proper cache flusing 1 - - - --- 2015-08-15 Hans de Goede jwrdegoede Accepted
[U-Boot,07/15] sunxi_nand_spl: Turn off clocks when we're done with the nand 1 - - - --- 2015-08-15 Hans de Goede jwrdegoede Accepted
[U-Boot,06/15] sunxi_nand_spl: Make sure the DMA controller is enabled 1 - - - --- 2015-08-15 Hans de Goede jwrdegoede Accepted
[U-Boot,05/15] sunxi_nand_spl: Use SYS_NAND_SELF_INIT and only do nand init when necessary 1 - - - --- 2015-08-15 Hans de Goede jwrdegoede Accepted
« 1 2 ... 1305 1306 13071789 1790 »