Show patches with: none      |   179079 patches
« 1 2 ... 1278 1279 1280 … 1790 1791 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot] configs: Use config_distro_defaults.h in ti_armv7_common.h - - - - --- 2015-10-29 Matwey V. Kornilov trini Accepted
[U-Boot,3/3,v5] crypto/fsl: SEC driver cleanup for 64 bit and endianness - - - - --- 2015-10-29 Aneesh Bansal yorksun Accepted
[U-Boot] nios2: remove the useless parenthesis in asm/io.h 1 - - 1 --- 2015-10-29 Thomas Chou thomaschou Accepted
[U-Boot] i2c: Fix pca953x endianess issue - - - - --- 2015-10-29 Dirk Eibach trini Accepted
[U-Boot,1/1] arm: at91: reworked meesc board support - - - - --- 2015-10-29 Daniel Gorsulowski Superseded
[U-Boot,2/2] armv8/ls1043aqds: add LS1043AQDS board support - - - - --- 2015-10-29 Gong Qianyu yorksun Superseded
[U-Boot,1/2] pci/layerscape: add support for LS1043A PCIe LUT register access - - - - --- 2015-10-29 Gong Qianyu yorksun Superseded
[U-Boot,v4,6/6] cgtqmx6eval: Add DFU support - - - - --- 2015-10-29 Otavio Salvador sbabic Changes Requested
[U-Boot,v4,5/6] iomux-v3: Take MX6D in consideration for imx_iomux_v3_setup_pad() - - - - --- 2015-10-29 Otavio Salvador sbabic Changes Requested
[U-Boot,v4,4/6] cgtqmx6eval: Add SPL support - - - - --- 2015-10-29 Otavio Salvador sbabic Changes Requested
[U-Boot,v4,3/6] cgtqmx6eval: Add fastboot support - - - - --- 2015-10-29 Otavio Salvador sbabic Changes Requested
[U-Boot,v4,2/6] cgtqmx6eval: Use SPI NOR to store the environment - - - - --- 2015-10-29 Otavio Salvador sbabic Changes Requested
[U-Boot,v4,1/6] cgtqmx6eval: Add SPI NOR flash support - - - - --- 2015-10-29 Otavio Salvador sbabic Changes Requested
[U-Boot,v2] colibri_vf: Add board_usb_phy_mode function - - - - --- 2015-10-29 Sanchayan Maity Superseded
[U-Boot,V2,5/5] arm: mx6: cm-fx6: add splash locations to cm-fx6 1 - - - --- 2015-10-29 Nikita Kiryanov sbabic Awaiting Upstream
[U-Boot,V2,4/5] splash_source: add support for filesystem formatted sata - - - - --- 2015-10-29 Nikita Kiryanov sbabic Awaiting Upstream
[U-Boot,V2,3/5] splash_source: add support for filesystem formatted usb - - - - --- 2015-10-29 Nikita Kiryanov sbabic Awaiting Upstream
[U-Boot,V2,2/5] splash_source: add support for filesystem formatted mmc - - - - --- 2015-10-29 Nikita Kiryanov sbabic Awaiting Upstream
[U-Boot,V2,1/5] splash_source: rename *_read() to *_read_raw() 1 - - - --- 2015-10-29 Nikita Kiryanov sbabic Awaiting Upstream
[U-Boot,2/2] nios2: enable setexpr command in defconfig 1 - - - --- 2015-10-29 Thomas Chou thomaschou Accepted
[U-Boot,1/2] nios2: clean up macros that do not need a value in board header - - - - --- 2015-10-29 Thomas Chou thomaschou Accepted
[U-Boot] imx: mx7: enable CONFIG_FSL_CLK - - - - --- 2015-10-29 Peng Fan sbabic Awaiting Upstream
[U-Boot] common: simply code - - 1 - --- 2015-10-29 Peng Fan Superseded
[U-Boot,V3,16/16] imx: mx7dsabresd: support lcdif - - - - --- 2015-10-29 Peng Fan sbabic Awaiting Upstream
[U-Boot,V3,15/16] imx: mx7: compile misc.c for mx7 - - - - --- 2015-10-29 Peng Fan sbabic Awaiting Upstream
[U-Boot,V3,14/16] imx: imx-common: power down lcdif before boot os - - - - --- 2015-10-29 Peng Fan sbabic Awaiting Upstream
[U-Boot,V3,13/16] imx: mx6: implement reset_misc - - - - --- 2015-10-29 Peng Fan sbabic Awaiting Upstream
[U-Boot,V3,12/16] video: mxsfb: introduce lcdif_power_down 1 - - - --- 2015-10-29 Peng Fan sbabic Awaiting Upstream
[U-Boot,V3,11/16] imx: mx6ul_14x14_evk: support lcdif display - - - - --- 2015-10-29 Peng Fan sbabic Awaiting Upstream
[U-Boot,V3,10/16] imx: mx6: add clock api for lcdif - - - - --- 2015-10-29 Peng Fan sbabic Awaiting Upstream
[U-Boot,V3,09/16] imx: mx6: crm_reg: add LCDIF related macros - - 1 - --- 2015-10-29 Peng Fan sbabic Awaiting Upstream
[U-Boot,V3,08/16] imx: mx6: fix register address - - - - --- 2015-10-29 Peng Fan sbabic Awaiting Upstream
[U-Boot,V3,07/16] imx: lcdif: use one register structure for i.MXes - - - - --- 2015-10-29 Peng Fan sbabic Awaiting Upstream
[U-Boot,V3,06/16] imx: imx-common: move lcdif structure and macro definition to imx-common - - - - --- 2015-10-29 Peng Fan sbabic Awaiting Upstream
[U-Boot,V3,05/16] imx: include linux/types.h for regs-common.h - - - - --- 2015-10-29 Peng Fan sbabic Awaiting Upstream
[U-Boot,V3,04/16] mxs: regs-common.h must be wrapped with !__ASSEMBLY__ - - - - --- 2015-10-29 Peng Fan sbabic Awaiting Upstream
[U-Boot,V3,03/16] xfi3: correct function name - - - - --- 2015-10-29 Peng Fan sbabic Awaiting Upstream
[U-Boot,V3,01/16] mxs: add parameter base_addr for mxs_set_lcdclk 1 - - - --- 2015-10-29 Peng Fan sbabic Awaiting Upstream
[U-Boot] mmc: sdhci: assigned to current clock value for host->clock - - - - --- 2015-10-29 Jaehoon Chung prom Changes Requested
[U-Boot,v1] board: ti: am57xx: Add board detection logic for am57xx evm - - - - --- 2015-10-28 Kipisz, Steven trini Changes Requested
[U-Boot,v1] board: ti: am57xx Add board detection logic - - - - --- 2015-10-28 Kipisz, Steven trini Changes Requested
[U-Boot,v1] ARM: omap-common: Add support for EEPROM - - - - --- 2015-10-28 Kipisz, Steven trini Changes Requested
[U-Boot,v1] board: ti: beagle_x15: Reused to support am57xx_evm - - - - --- 2015-10-28 Kipisz, Steven Superseded
[U-Boot] Pull request: u-boot-spi/master - - - - --- 2015-10-28 Jagan Teki trini Accepted
[U-Boot,v2] net: phy: Add support for Texas Instruments DP83867 - - - - --- 2015-10-28 Michal Simek monstr Superseded
[U-Boot,v0,5/5] spi: Add support for Armada 38x second controller - - - - --- 2015-10-28 Dirk Eibach stroese Changes Requested
[U-Boot,v0,4/5] arm: mvebu: Fix ddr3_init() cpu config - - 1 - --- 2015-10-28 Dirk Eibach stroese Accepted
[U-Boot,v0,3/5] arm: mvebu: Fix SAR1_CPU_CORE_MASK - - 1 - --- 2015-10-28 Dirk Eibach stroese Accepted
[U-Boot,v0,2/5] arm: mvebu: Add gpio support - - - - --- 2015-10-28 Dirk Eibach stroese Changes Requested
[U-Boot,v0,1/5] pci: mvebu: Fix Armada 38x support - - 1 - --- 2015-10-28 Dirk Eibach stroese Superseded
[U-Boot,v3,6/6] cgtqmx6eval: Add DFU support - - - - --- 2015-10-28 Otavio Salvador sbabic Changes Requested
[U-Boot,v3,5/6] iomux-v3: Take MX6D in consideration for imx_iomux_v3_setup_pad() - - - - --- 2015-10-28 Otavio Salvador sbabic Changes Requested
[U-Boot,v3,4/6] cgtqmx6eval: Add SPL support - - - - --- 2015-10-28 Otavio Salvador sbabic Changes Requested
[U-Boot,v3,3/6] cgtqmx6eval: Add fastboot support - - - - --- 2015-10-28 Otavio Salvador sbabic Changes Requested
[U-Boot,v3,2/6] cgtqmx6eval: Use SPI NOR to store the environment - - - - --- 2015-10-28 Otavio Salvador sbabic Changes Requested
[U-Boot,v3,1/6] cgtqmx6eval: Add SPI NOR flash support - - - - --- 2015-10-28 Otavio Salvador sbabic Changes Requested
[U-Boot,2/2] s5p sdhci: call pinmux for card's gpio pins before use them 1 - - 1 --- 2015-10-28 Przemyslaw Marczak prom Accepted
[U-Boot,1/2] Exynos4412: pinmux: disable pull for MMC pins 1 - - 1 --- 2015-10-28 Przemyslaw Marczak prom Accepted
[U-Boot] fdt: fix address cell count checking in fdt_translate_address() - - - 2 --- 2015-10-28 Przemyslaw Marczak sjg Rejected
[U-Boot,v3,4/4] exynos: more debug and cleanup in do_sdhci_init() - - - - --- 2015-10-28 Jaehoon Chung prom Not Applicable
[U-Boot,v1,18/18] i2c: soft_i2c: Fix bus indizes - - - - --- 2015-10-28 Dirk Eibach trini Accepted
[U-Boot,v1,17/18] board: gdsys: Enable osd on output only - - - - --- 2015-10-28 Dirk Eibach trini Accepted
[U-Boot,v1,16/18] board: gdsys: Add osdsize command - - - - --- 2015-10-28 Dirk Eibach trini Accepted
[U-Boot,v1,15/18] hrcon: Add fan controllers - - - - --- 2015-10-28 Dirk Eibach trini Accepted
[U-Boot,v1,14/18] hrcon: Add support for the DH variant - - - - --- 2015-10-28 Dirk Eibach trini Accepted
[U-Boot,v1,13/18] hrcon: Fix videoboard i2c setup - - - - --- 2015-10-28 Dirk Eibach trini Accepted
[U-Boot,v1,12/18] hrcon: Use generic ioep-fpga support - - - - --- 2015-10-28 Dirk Eibach trini Accepted
[U-Boot,v1,11/18] mpc83xx: Add strider board - - - - --- 2015-10-28 Dirk Eibach trini Accepted
[U-Boot,v1,10/18] hrcon: Remove CH7301 configuration - - - - --- 2015-10-28 Dirk Eibach trini Accepted
[U-Boot,v1,09/18] iocon: reset FPGAs in last_stage_init() - - - - --- 2015-10-28 Dirk Eibach trini Accepted
[U-Boot,v1,08/18] controlcenterd: Disable sideband clocks - - - - --- 2015-10-28 Dirk Eibach trini Accepted
[U-Boot,v1,07/18] dlvision-10g: Support displayport - - - - --- 2015-10-28 Dirk Eibach trini Accepted
[U-Boot,v1,06/18] board: gdsys: Consider DP501 limits on link training - - - - --- 2015-10-28 Dirk Eibach trini Accepted
[U-Boot,v1,05/18] board: gdsys: Increase DP501 I2C retry interval - - 1 - --- 2015-10-28 Dirk Eibach trini Accepted
[U-Boot,v1,04/18] board: gdsys: Configure DP501 SPDIF input - - 1 - --- 2015-10-28 Dirk Eibach trini Accepted
[U-Boot,v1,03/18] i2c: ihs_i2c: Fix hold_bus control 1 - - - --- 2015-10-28 Dirk Eibach trini Accepted
[U-Boot,v1,02/18] i2c: ihs_i2c: Use macro bestpractices 1 - - - --- 2015-10-28 Dirk Eibach trini Accepted
[U-Boot,v1,01/18] i2c: ihs_i2c: Dual channel support 1 - - - --- 2015-10-28 Dirk Eibach trini Accepted
[U-Boot,V2,13/13] spl: mmc: add support for BOOT_DEVICE_MMC2 - - 1 - --- 2015-10-28 Nikita Kiryanov trini Superseded
[U-Boot,V2,12/13] arm: mx6: cm-fx6: define fallback boot devices for spl - - 2 - --- 2015-10-28 Nikita Kiryanov trini Superseded
[U-Boot,V2,11/13] spl: announce boot devices - - - - --- 2015-10-28 Nikita Kiryanov trini Superseded
[U-Boot,V2,10/13] spl: add support for alternative boot device - - 1 - --- 2015-10-28 Nikita Kiryanov trini Superseded
[U-Boot,V2,09/13] common: spl: move image load to its own function - - 2 - --- 2015-10-28 Nikita Kiryanov trini Superseded
[U-Boot,V2,08/13] spl: change return values of spl_*_load_image() - - - - --- 2015-10-28 Nikita Kiryanov trini Superseded
[U-Boot,V2,07/13] spl: mmc: get rid of emmc boot code duplication - - 2 - --- 2015-10-28 Nikita Kiryanov trini Superseded
[U-Boot,V2,06/13] spl: mmc: move fs boot into its own function - - 2 - --- 2015-10-28 Nikita Kiryanov trini Superseded
[U-Boot,V2,05/13] spl: mmc: get rid of #ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION check - - 2 - --- 2015-10-28 Nikita Kiryanov trini Superseded
[U-Boot,V2,04/13] spl: mmc: remove #ifdef CONFIG_SPL_OS_BOOT check - - 2 - --- 2015-10-28 Nikita Kiryanov trini Superseded
[U-Boot,V2,03/13] spl: mmc: refactor device location code to its own function - - 1 - --- 2015-10-28 Nikita Kiryanov trini Superseded
[U-Boot,V2,02/13] spl: mmc: add break statements in spl_mmc_load_image() - - 2 - --- 2015-10-28 Nikita Kiryanov trini Superseded
[U-Boot,V2,01/13] spl: nand: remove code duplication 1 - 1 - --- 2015-10-28 Nikita Kiryanov trini Superseded
[U-Boot] Please pull from u-boot-i2c - - - - --- 2015-10-28 Heiko Schocher trini Accepted
[U-Boot,10/10] driver: net: ldpaa: Add debug information - - - - --- 2015-10-28 Prabhakar Kushwaha yorksun Superseded
[U-Boot,09/10] driver: net: ldpaa: Use DPMAC as net device - - - - --- 2015-10-28 Prabhakar Kushwaha yorksun Superseded
[U-Boot,08/10] driver: net: fsl-mc: Create DPAA2 object at run-time - - - - --- 2015-10-28 Prabhakar Kushwaha yorksun Superseded
[U-Boot,07/10] driver: net: fsl-mc: Add DPAA2 commands to manage MC - - - - --- 2015-10-28 Prabhakar Kushwaha yorksun Superseded
[U-Boot,06/10] driver: net: fsl-mc: Increase MC command timeout - - - - --- 2015-10-28 Prabhakar Kushwaha yorksun Superseded
[U-Boot,05/10] driver: ldpaa: Add api to return linked PHY ID of DPMAC - - - - --- 2015-10-28 Prabhakar Kushwaha yorksun Superseded
[U-Boot,04/10] armv8: ls2085aqds: Print function name during SerDes error - - - - --- 2015-10-28 Prabhakar Kushwaha yorksun Superseded
[U-Boot,03/10] driver: net: fsl-mc: Add APIs for DPMAC objects in FLIB - - - - --- 2015-10-28 Prabhakar Kushwaha yorksun Superseded
« 1 2 ... 1278 1279 1280 … 1790 1791 »