Show patches with: none      |   141811 patches
« 1 2 3 41418 1419 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[v8,5/5] iot2050: Enable watchdog support, but do not auto-start it Add SIMATIC IOT2050 board support - - - - --- 2021-09-18 Jan Kiszka New
[v8,4/5] watchdog: rti_wdt: Add support for loading firmware Add SIMATIC IOT2050 board support - - - - --- 2021-09-18 Jan Kiszka New
[v8,3/5] arm64: dts: ti: k3-am65-mcu: Add RTI watchdog entry Add SIMATIC IOT2050 board support - - - - --- 2021-09-18 Jan Kiszka New
[v8,2/5] board: siemens: Add support for SIMATIC IOT2050 devices Add SIMATIC IOT2050 board support - - - - --- 2021-09-18 Jan Kiszka New
[v8,1/5] arm: dts: Add IOT2050 device tree files Add SIMATIC IOT2050 board support - - - - --- 2021-09-18 Jan Kiszka New
[RFC,2/2] mtd: Add pairing info for Toshiba TC58TEG5DCLTA00 NAND mtd: Support slc-mode for Toshiba TC58TEG5DCLTA00 - - - - --- 2021-09-17 Chris Morgan New
[RFC,1/2] mtd: Add partial support for Linux slc-mode for MLC NAND mtd: Support slc-mode for Toshiba TC58TEG5DCLTA00 - - - - --- 2021-09-17 Chris Morgan New
[17/17] kconfig: Add a new CONFIG() macro RFC: Split configs between U-Boot proper and SPL builds - - - - --- 2021-09-17 Simon Glass New
[16/17] kconfig: Update CONFIG_IS_ENABLED() for split files RFC: Split configs between U-Boot proper and SPL builds - - - - --- 2021-09-17 Simon Glass New
[15/17] Makefile: Support ad-hoc COMFIX_SPL_IMAGE_SIZE et al RFC: Split configs between U-Boot proper and SPL builds - - - - --- 2021-09-17 Simon Glass New
[14/17] Makefile: Use empty SPL_ and SPL_TPL_ vars RFC: Split configs between U-Boot proper and SPL builds - - - - --- 2021-09-17 Simon Glass New
[13/17] Makefile: Include the config for the phase being built RFC: Split configs between U-Boot proper and SPL builds - - - - --- 2021-09-17 Simon Glass New
[12/17] kconfig: Support writing separate SPL files RFC: Split configs between U-Boot proper and SPL builds - - - - --- 2021-09-17 Simon Glass New
[11/17] kconfig: Refactor code into separate writer functions RFC: Split configs between U-Boot proper and SPL builds - - - - --- 2021-09-17 Simon Glass New
[10/17] virtio: Add SPL Kconfig for virtio RFC: Split configs between U-Boot proper and SPL builds - - - - --- 2021-09-17 Simon Glass New
[09/17] serial: Tidy up the Makefile condition for DM_SERIAL RFC: Split configs between U-Boot proper and SPL builds - - - - --- 2021-09-17 Simon Glass New
[08/17] sandbox: Enable MISC support for the SPL build RFC: Split configs between U-Boot proper and SPL builds - - - - --- 2021-09-17 Simon Glass New
[07/17] test: Add SPL Kconfig for compression tests RFC: Split configs between U-Boot proper and SPL builds - - - - --- 2021-09-17 Simon Glass New
[06/17] power: Add SPL Kconfig for sandbox pmc emulator RFC: Split configs between U-Boot proper and SPL builds - - - - --- 2021-09-17 Simon Glass New
[05/17] cros_ec: Add SPL Kconfigs for cros_ec features RFC: Split configs between U-Boot proper and SPL builds - - - - --- 2021-09-17 Simon Glass New
[04/17] cmd: Add an SPL Kconfig for CMDLINE and HUSH RFC: Split configs between U-Boot proper and SPL builds - - - - --- 2021-09-17 Simon Glass New
[03/17] acpi: Add a Kconfig for SPL RFC: Split configs between U-Boot proper and SPL builds - - - - --- 2021-09-17 Simon Glass New
[02/17] x86: Fix qemu condition for arch_cpu_init() RFC: Split configs between U-Boot proper and SPL builds - - - - --- 2021-09-17 Simon Glass New
[01/17] env: Avoid checking ENV_IS_IN when env disabled RFC: Split configs between U-Boot proper and SPL builds - - - - --- 2021-09-17 Simon Glass New
m68k: Add missing ENTRY entry in linker script m68k: Add missing ENTRY entry in linker script - - - - --- 2021-09-17 Tom Rini New
[v3,2/2] spi: rockchip_sfc: Using read_poll [v3,1/2] spi: rockchip_sfc: Implement set_speed logic - - - 1 --- 2021-09-17 Jon Lin New
[v3,1/2] spi: rockchip_sfc: Implement set_speed logic [v3,1/2] spi: rockchip_sfc: Implement set_speed logic - - - 1 --- 2021-09-17 Jon Lin New
board: freescale: lx216x : increase fdt blob size board: freescale: lx216x : increase fdt blob size - - - - --- 2021-09-17 Wasim Khan New
[11/11] pci: pcie_layerscape_fixup_common: lx2_board_fix_fdt can be static Drive-by PCI W=1 cleanups - - 1 - --- 2021-09-17 Vladimir Oltean New
[10/11] pci: pcie_layerscape_fixup_common: include fdt_support.h for ft_pci_setup Drive-by PCI W=1 cleanups - - 1 - --- 2021-09-17 Vladimir Oltean New
[09/11] pci: layerscape: ls_pcie_conf_address can be static Drive-by PCI W=1 cleanups - - 1 - --- 2021-09-17 Vladimir Oltean New
[08/11] pci: _dm_pci_phys_to_bus can be static Drive-by PCI W=1 cleanups - - 1 - --- 2021-09-17 Vladimir Oltean New
[07/11] pci: pci_read_config can be static Drive-by PCI W=1 cleanups - - 1 - --- 2021-09-17 Vladimir Oltean New
[06/11] pci: pci_write_config can be static Drive-by PCI W=1 cleanups - - 1 - --- 2021-09-17 Vladimir Oltean New
[05/11] pci: pciinfo_header can be static Drive-by PCI W=1 cleanups - - 1 - --- 2021-09-17 Vladimir Oltean New
[04/11] pci: pci_header_show can be static Drive-by PCI W=1 cleanups - - 1 - --- 2021-09-17 Vladimir Oltean New
[03/11] pci: pci_bar_show can be static Drive-by PCI W=1 cleanups - - 1 - --- 2021-09-17 Vladimir Oltean New
[02/11] pci: include pci_internal.h inside pci_auto.c Drive-by PCI W=1 cleanups - - 1 - --- 2021-09-17 Vladimir Oltean New
[01/11] pci: provide prototype for pci_skip_dev outside of #if defined(CONFIG_DM_PCI_COMPAT) Drive-by PCI W=1 cleanups - - 1 - --- 2021-09-17 Vladimir Oltean New
net: update NXP copyright text net: update NXP copyright text - - - - --- 2021-09-17 Vladimir Oltean New
distro_bootcmd: change the default dtb search path to include default kernel dtbs directory distro_bootcmd: change the default dtb search path to include default kernel dtbs directory - - - - --- 2021-09-17 Qu Wenruo New
arm: rpi: perform XHCI firmware upload only once arm: rpi: perform XHCI firmware upload only once - - 1 - --- 2021-09-17 Marek Szyprowski matthias_bgg Under Review
[v3,10/10] ARM: amlogic: add Banana Pi M5 [v3,01/10] ARM: meson: Sync Amlogic DT from Linux 5.14 - - - - --- 2021-09-17 Neil Armstrong New
[v3,09/10] ARM: meson: add Beelink GS-King X board [v3,01/10] ARM: meson: Sync Amlogic DT from Linux 5.14 - - - - --- 2021-09-17 Neil Armstrong New
[v3,08/10] doc: boards: amlogic: update for Odroid HC4 [v3,01/10] ARM: meson: Sync Amlogic DT from Linux 5.14 - - - - --- 2021-09-17 Neil Armstrong New
[v3,07/10] ARM: amlogic: add support for Odroid-HC4 device [v3,01/10] ARM: meson: Sync Amlogic DT from Linux 5.14 - - - - --- 2021-09-17 Neil Armstrong New
[v3,06/10] distro_bootcmd: run pci enum for scsi_boot just like it is done for nvme_boot [v3,01/10] ARM: meson: Sync Amlogic DT from Linux 5.14 - - - - --- 2021-09-17 Neil Armstrong New
[v3,05/10] configs: meson64: add SCSI boot target [v3,01/10] ARM: meson: Sync Amlogic DT from Linux 5.14 - - - - --- 2021-09-17 Neil Armstrong New
[v3,04/10] ARM: meson-axg: remove local USB nodes [v3,01/10] ARM: meson: Sync Amlogic DT from Linux 5.14 - - - - --- 2021-09-17 Neil Armstrong New
[v3,03/10] ARM: meson: keep HW order for MMC devices [v3,01/10] ARM: meson: Sync Amlogic DT from Linux 5.14 - - - - --- 2021-09-17 Neil Armstrong New
[v3,02/10] usb: dwc3: meson-gxl: add AXG compatible [v3,01/10] ARM: meson: Sync Amlogic DT from Linux 5.14 - - - - --- 2021-09-17 Neil Armstrong New
[v3,01/10] ARM: meson: Sync Amlogic DT from Linux 5.14 [v3,01/10] ARM: meson: Sync Amlogic DT from Linux 5.14 - - - - --- 2021-09-17 Neil Armstrong New
[4/4] rtc: rx8025: revise single register write to use offset Add EPSON RX8035 RTC support - - - - --- 2021-09-17 Mathew McBride New
[3/4] rtc: rx8025: set date in a single i2c transaction Add EPSON RX8035 RTC support - - - - --- 2021-09-17 Mathew McBride New
[2/4] rtc: rx8025: add support for EPSON RX8035. Add EPSON RX8035 RTC support - - - - --- 2021-09-17 Mathew McBride New
[1/4] rtc: rx8025: drop non-DM support Add EPSON RX8035 RTC support - - - - --- 2021-09-17 Mathew McBride New
[1/1] powerpc: Drop version_string placement optimization [1/1] powerpc: Drop version_string placement optimization - - - - --- 2021-09-16 Tom Rini trini Under Review
xtensa: Put U-Boot version string at correct place by linker script xtensa: Put U-Boot version string at correct place by linker script - - - - --- 2021-09-16 Tom Rini trini Deferred
imx: imx7d-sdb: fix ethernet, sync .dts with linux imx: imx7d-sdb: fix ethernet, sync .dts with linux - - - - --- 2021-09-16 Rasmus Villemoes New
fs: fat: check for buffer size before reading blocks fs: fat: check for buffer size before reading blocks - 1 - - --- 2021-09-16 Oleksandr Suvorov xypron New
[v3,2/2] mtd: spi: nor: force mtd name to "nor%d" mtd: spi: nor: force mtd name to "nor%d" - 1 - - --- 2021-09-16 Patrick DELAUNAY jagan New
[v3,1/2] mtd: cfi_flash: use cfi_flash_num_flash_banks only when supported mtd: spi: nor: force mtd name to "nor%d" - - - - --- 2021-09-16 Patrick DELAUNAY jagan New
usb: xhci-dwc3: Add support for USB 3.1 controllers usb: xhci-dwc3: Add support for USB 3.1 controllers - - 1 - --- 2021-09-16 Mark Kettenis bmeng New
[2/2] cmd: Add CONFIG_FIT_SIGNATURE_STRICT Enable strict signature verification for FIT - - - - --- 2021-09-16 Oleksandr Suvorov trini New
[1/2] spl: Add CONFIG_SPL_FIT_SIGNATURE_STRICT Enable strict signature verification for FIT - - - - --- 2021-09-16 Oleksandr Suvorov trini New
[3/3] video: simplefb: Add 30bpp support 30bpp framebuffer support - - - - --- 2021-09-16 Mark Kettenis ag New
[2/3] efi_loader: GOP: Add 30bpp support 30bpp framebuffer support - - - - --- 2021-09-16 Mark Kettenis xypron New
[1/3] video: Add 30bpp support 30bpp framebuffer support - - - - --- 2021-09-16 Mark Kettenis ag New
lib: rsa: fix dependency for SPL_RSA_VERIFY lib: rsa: fix dependency for SPL_RSA_VERIFY - - - - --- 2021-09-16 Oleksandr Suvorov trini New
[v4] apalis/colibri_imx6: move setting bootcmd to defconfig [v4] apalis/colibri_imx6: move setting bootcmd to defconfig 1 - 2 - --- 2021-09-16 Oleksandr Suvorov sbabic New
[v3] apalis/colibri_imx6: move setting bootcmd to defconfig [v3] apalis/colibri_imx6: move setting bootcmd to defconfig - - 2 - --- 2021-09-16 Oleksandr Suvorov sbabic Superseded
mailmap: Update mail address for Nicolas Saenz julienne mailmap: Update mail address for Nicolas Saenz julienne - - - - --- 2021-09-16 Nicolas Saenz Julienne matthias_bgg Under Review
[1/1] scripts/mailmapper: enable running with Python 3 [1/1] scripts/mailmapper: enable running with Python 3 - - - - --- 2021-09-16 Heinrich Schuchardt trini New
[v2] apalis/colibri_imx6: move setting bootcmd to defconfig [v2] apalis/colibri_imx6: move setting bootcmd to defconfig 1 - 2 - --- 2021-09-16 Oleksandr Suvorov sbabic Superseded
[3/3] efi_selftest: Recieve the packets until the receive buffer is empty efi_selftest: Update SIMPLE_NETWORK_PROTOCOL selftest - - - - --- 2021-09-16 Masami Hiramatsu xypron New
[2/3] efi_selftest: Do not check EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT efi_selftest: Update SIMPLE_NETWORK_PROTOCOL selftest - - - - --- 2021-09-16 Masami Hiramatsu xypron New
[1/3] efi_selftest: Use EFI_SIMPLE_NETWORK_PROTOCOL::GetStatus() for media check efi_selftest: Update SIMPLE_NETWORK_PROTOCOL selftest - - - - --- 2021-09-16 Masami Hiramatsu xypron New
[next,v4,11/11] configs: ast2600: Boot kernel FIT in DRAM aspeed: Support secure boot chain with FIT image verification - - - - --- 2021-09-16 ChiaWei Wang trini New
[next,v4,10/11] configs: aspeed: Make EXTRA_ENV_SETTINGS board specific aspeed: Support secure boot chain with FIT image verification - - - - --- 2021-09-16 ChiaWei Wang trini New
[next,v4,09/11] configs: ast2600-evb: Enable SPL FIT support aspeed: Support secure boot chain with FIT image verification - - - - --- 2021-09-16 ChiaWei Wang trini New
[next,v4,08/11] ast2600: spl: Locate load buffer in DRAM space aspeed: Support secure boot chain with FIT image verification - - - - --- 2021-09-16 ChiaWei Wang trini New
[next,v4,07/11] ARM: dts: ast2600: Add ACRY to device tree aspeed: Support secure boot chain with FIT image verification - - - - --- 2021-09-16 ChiaWei Wang trini New
[next,v4,06/11] crypto: aspeed: Add AST2600 ACRY support aspeed: Support secure boot chain with FIT image verification - - - - --- 2021-09-16 ChiaWei Wang trini New
[next,v4,05/11] clk: ast2600: Add RSACLK control for ACRY aspeed: Support secure boot chain with FIT image verification - - - - --- 2021-09-16 ChiaWei Wang trini New
[next,v4,04/11] ARM: dts: ast2600: Add HACE to device tree aspeed: Support secure boot chain with FIT image verification - - - - --- 2021-09-16 ChiaWei Wang trini New
[next,v4,03/11] crypto: aspeed: Add AST2600 HACE support aspeed: Support secure boot chain with FIT image verification - - - - --- 2021-09-16 ChiaWei Wang trini New
[next,v4,02/11] clk: ast2600: Add YCLK control for HACE aspeed: Support secure boot chain with FIT image verification - - - - --- 2021-09-16 ChiaWei Wang trini New
[next,v4,01/11] aspeed: ast2600: Enlarge SRAM size aspeed: Support secure boot chain with FIT image verification - - - - --- 2021-09-16 ChiaWei Wang trini New
[1/1] fs: avoid superfluous messages [1/1] fs: avoid superfluous messages - - - - --- 2021-09-16 Heinrich Schuchardt trini New
[1/1] fs: btrfs: avoid superfluous messages [1/1] fs: btrfs: avoid superfluous messages - - - - --- 2021-09-16 Heinrich Schuchardt trini Deferred
[1/1] fs/squashfs: avoid superfluous messages [1/1] fs/squashfs: avoid superfluous messages - - - - --- 2021-09-16 Heinrich Schuchardt trini New
driver: gadget: fastboot: Link endpoint and descriptors driver: gadget: fastboot: Link endpoint and descriptors - - - - --- 2021-09-16 qianfan lukma New
[next] lib: hash-checksum: Use DM_HASH if supported [next] lib: hash-checksum: Use DM_HASH if supported - - - - --- 2021-09-16 ChiaWei Wang trini New
ARM: dts: ast2600: Make WDT by default disabled ARM: dts: ast2600: Make WDT by default disabled - - 1 - --- 2021-09-16 ChiaWei Wang trini New
[RFC] test/py: Check hashes produced by mkimage against known values [RFC] test/py: Check hashes produced by mkimage against known values - - - - --- 2021-09-15 Alex G. trini New
[GIT,PULL] rpi: updates for v2021.10 [GIT,PULL] rpi: updates for v2021.10 - - - - --- 2021-09-15 Matthias Brugger trini Accepted
arm: zynq: Use s25fl256s1 compatible string on zedboard arm: zynq: Use s25fl256s1 compatible string on zedboard - - - - --- 2021-09-15 Michal Simek monstr New
arm64: zynqmp: Add device tree properties for nand flash arm64: zynqmp: Add device tree properties for nand flash - - - - --- 2021-09-15 Michal Simek monstr New
[1/1] phy: marvell: cp110: Support SATA invert polarity [1/1] phy: marvell: cp110: Support SATA invert polarity - - - - --- 2021-09-15 Denis Odintsov stroese New
arm: orion5x: edminiv2: change maintainer arm: orion5x: edminiv2: change maintainer - - 1 - --- 2021-09-15 Simon Guinot trini New
« 1 2 3 41418 1419 »