Show patches with: Submitter = Bin Meng       |    Archived = No       |   3050 patches
« 1 2 ... 28 29 30 31 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,v1] x86: ahci: Make sure interface is not busy after enabling the port - - - - --- 2014-12-23 Bin Meng Superseded
[U-Boot,5/5] x86: Add PCI UART related defines in crownbay.h - - - - --- 2014-12-19 Bin Meng sjg Superseded
[U-Boot,4/5] x86: Support PCI UART in the x86_serial driver - - - - --- 2014-12-19 Bin Meng sjg Superseded
[U-Boot,3/5] x86: Add an API for finding pci devices in the early phase - - - - --- 2014-12-19 Bin Meng sjg Superseded
[U-Boot,2/5] x86: Support pci bus scan in the early phase - - - - --- 2014-12-19 Bin Meng sjg Superseded
[U-Boot,1/5] x86: Add missing DECLARE_GLOBAL_DATA_PTR for pci.c - - - - --- 2014-12-19 Bin Meng sjg Superseded
[U-Boot,v4,15/15] x86: Clean up the FSP support codes 1 - - - --- 2014-12-17 Bin Meng sjg Accepted
[U-Boot,v4,14/15] x86: Add a README.x86 for U-Boot on x86 support 1 - - - --- 2014-12-17 Bin Meng sjg Accepted
[U-Boot,v4,13/15] x86: Rename coreboot-serial to x86-serial 1 - - - --- 2014-12-17 Bin Meng sjg Accepted
[U-Boot,v4,12/15] x86: crownbay: Add SDHCI support 1 - - - --- 2014-12-17 Bin Meng sjg Accepted
[U-Boot,v4,11/15] x86: crownbay: Enable Intel E1000 NIC support 1 - - - --- 2014-12-17 Bin Meng sjg Accepted
[U-Boot,v4,10/15] x86: crownbay: Add SPI flash support 1 - - - --- 2014-12-17 Bin Meng sjg Accepted
[U-Boot,v4,09/15] x86: Include FSP and CMC binary in the u-boot.rom build rules 1 - - - --- 2014-12-17 Bin Meng sjg Accepted
[U-Boot,v4,08/15] x86: Use consistent name XXX_ADDR for binary blob flash address 1 - - - --- 2014-12-17 Bin Meng sjg Accepted
[U-Boot,v4,07/15] x86: Add crownbay defconfig and config.h 1 - - - --- 2014-12-17 Bin Meng sjg Accepted
[U-Boot,v4,06/15] x86: Add queensbay and crownbay Kconfig files 1 - - - --- 2014-12-17 Bin Meng sjg Accepted
[U-Boot,v4,05/15] x86: Enable the queensbay cpu directory build 1 - - - --- 2014-12-17 Bin Meng sjg Accepted
[U-Boot,v4,04/15] x86: ich6-gpio: Add Intel Tunnel Creek GPIO support 1 - - - --- 2014-12-17 Bin Meng sjg Accepted
[U-Boot,v4,03/15] x86: Convert microcode format to device-tree-only - - 1 1 --- 2014-12-17 Bin Meng sjg Accepted
[U-Boot,v4,02/15] x86: Add basic support to queensbay platform and crownbay board 1 - - - --- 2014-12-17 Bin Meng sjg Accepted
[U-Boot,v4,01/15] x86: Integrate Tunnel Creek processor microcode 1 - - - --- 2014-12-17 Bin Meng sjg Accepted
[U-Boot,v2] x86: Clean up the FSP support codes - - - - --- 2014-12-15 Bin Meng sjg Changes Requested
[U-Boot] x86: Clean up the FSP support codes - - - - --- 2014-12-14 Bin Meng sjg Superseded
[U-Boot,v3,27/27] x86: Add a README.x86 for U-Boot on x86 support 1 - - - --- 2014-12-12 Bin Meng sjg Superseded
[U-Boot,v3,26/27] x86: Rename coreboot-serial to x86-serial 1 - - - --- 2014-12-12 Bin Meng sjg Superseded
[U-Boot,v3,25/27] x86: crownbay: Add SDHCI support 1 - - - --- 2014-12-12 Bin Meng sjg Superseded
[U-Boot,v3,24/27] x86: crownbay: Enable Intel E1000 NIC support 1 - - - --- 2014-12-12 Bin Meng sjg Superseded
[U-Boot,v3,23/27] x86: crownbay: Add SPI flash support 1 - 1 - --- 2014-12-12 Bin Meng sjg Superseded
[U-Boot,v3,22/27] x86: Include FSP and CMC binary in the u-boot.rom build rules 1 - - - --- 2014-12-12 Bin Meng sjg Superseded
[U-Boot,v3,21/27] x86: Use consistent name XXX_ADDR for binary blob flash address 1 - - - --- 2014-12-12 Bin Meng sjg Superseded
[U-Boot,v3,20/27] x86: Add crownbay defconfig and config.h 1 - - - --- 2014-12-12 Bin Meng sjg Superseded
[U-Boot,v3,19/27] x86: Add queensbay and crownbay Kconfig files 1 - - - --- 2014-12-12 Bin Meng sjg Superseded
[U-Boot,v3,18/27] x86: Enable the queensbay cpu directory build 1 - - - --- 2014-12-12 Bin Meng sjg Superseded
[U-Boot,v3,17/27] x86: ich6-gpio: Add Intel Tunnel Creek GPIO support 1 - - - --- 2014-12-12 Bin Meng sjg Superseded
[U-Boot,v3,16/27] x86: Add basic support to queensbay platform and crownbay board - - - - --- 2014-12-12 Bin Meng sjg Superseded
[U-Boot,v3,15/27] x86: Integrate Tunnel Creek processor microcode - - - - --- 2014-12-12 Bin Meng sjg Superseded
[U-Boot,v3,14/27] x86: Add a simple command to show FSP HOB information 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,13/27] x86: Support Intel FSP initialization path in start.S 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,12/27] x86: Add post failure codes for bist and car 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,11/27] x86: queensbay: Adapt FSP support codes - - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,10/27] x86: Initial import from Intel FSP release for Queensbay platform - - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,09/27] x86: ich-spi: Add Intel Tunnel Creek SPI controller support 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,08/27] x86: Add Intel Topcliff PCH device IDs 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,07/27] x86: Add a simple superio driver for SMSC LPC47M 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,06/27] x86: Add Intel Crown Bay board dts file 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,05/27] x86: ich6-gpio: Move setup_pch_gpios() to board support codes 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,04/27] x86: Clean up asm-offsets 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,03/27] x86: Refactor u-boot.rom build rules 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,02/27] tools/ifdtool: Support writing multiple files (-w) simultaneously 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,01/27] x86: Make ROM_SIZE configurable in Kconfig 1 - - - --- 2014-12-12 Bin Meng sjg Accepted
[U-Boot,v3,9/9] sf: Give proper spacing between flash table params - - - - --- 2014-12-10 Bin Meng jagan Not Applicable
[U-Boot,v3,8/9] sf: Update Winbond flash params - - - - --- 2014-12-10 Bin Meng jagan Not Applicable
[U-Boot,v3,7/9] sf: Update Micron flash params - - - - --- 2014-12-10 Bin Meng jagan Not Applicable
[U-Boot,v3,6/9] sf: Update Spansion flash params - - - - --- 2014-12-10 Bin Meng jagan Not Applicable
[U-Boot,v3,5/9] sf: Update Macronix flash params - - - - --- 2014-12-10 Bin Meng jagan Not Applicable
[U-Boot,v3,4/9] sf: Update GigaDevice flash params - - - - --- 2014-12-10 Bin Meng jagan Not Applicable
[U-Boot,v3,3/9] sf: Update EON flash params - - - - --- 2014-12-10 Bin Meng jagan Not Applicable
[U-Boot,v3,2/9] sf: Update Atmel flash params - - - - --- 2014-12-10 Bin Meng jagan Not Applicable
[U-Boot,v3,1/9] sf: Update SST flash params - - - - --- 2014-12-10 Bin Meng jagan Not Applicable
[U-Boot,v3,2/2] x86: ich-spi: Set the tx operation mode for ich 7 - - - - --- 2014-12-10 Bin Meng sjg Superseded
[U-Boot,v3,1/2] x86: ich-spi: Set the rx operation mode for ich 7 1 - - 1 --- 2014-12-10 Bin Meng sjg Superseded
[U-Boot,RESEND] x86: ich-spi: Fix a bug of reading from a non-64 bytes aligned address 1 - - 1 --- 2014-12-10 Bin Meng sjg Accepted
[U-Boot,v2,27/27] x86: Add a README.x86 for U-Boot on x86 support 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,26/27] x86: Rename coreboot-serial to x86-serial 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,25/27] x86: crownbay: Add SDHCI support 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,24/27] x86: crownbay: Enable Intel E1000 NIC support 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,23/27] x86: crownbay: Add SPI flash support 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,22/27] x86: Include FSP and CMC binary in the u-boot.rom build rules 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,21/27] x86: Use consistent name XXX_ADDR for binary blob flash address 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,20/27] x86: Add crownbay defconfig and config.h 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,19/27] x86: Add queensbay and crownbay Kconfig files 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,18/27] x86: Enable the queensbay cpu directory build 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,17/27] x86: ich6-gpio: Add Intel Tunnel Creek GPIO support 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,16/27] x86: Add basic support to queensbay platform and crownbay board - - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,15/27] x86: Integrate Tunnel Creek processor microcode - - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,14/27] x86: Add a simple command to show FSP HOB information 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,13/27] x86: Support Intel FSP initialization path in start.S 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,12/27] x86: Add post failure codes for bist and car 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,11/27] x86: queensbay: Adapt FSP support codes - - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,10/27] x86: Initial import from Intel FSP release for Queensbay platform - - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,09/27] x86: ich-spi: Add Intel Tunnel Creek SPI controller support 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,08/27] x86: Add Intel Topcliff PCH device IDs 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,07/27] x86: Add a simple superio driver for SMSC LPC47M 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,06/27] x86: Add Intel Crown Bay board dts file 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,05/27] x86: ich6-gpio: Move setup_pch_gpios() to board support codes 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,04/27] x86: Clean up asm-offsets 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,03/27] x86: Refactor u-boot.rom build rules 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,02/27] tools/ifdtool: Support writing multiple files (-w) simultaneously 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,v2,01/27] x86: Make ROM_SIZE configurable in Kconfig 1 - - - --- 2014-12-09 Bin Meng sjg Superseded
[U-Boot,25/25] x86: Add a README.x86 for U-Boot on x86 support - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,24/25] x86: crownbay: Add SDHCI support - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,23/25] x86: crownbay: Enable Intel E1000 NIC support 1 - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,22/25] x86: crownbay: Add SPI flash support - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,21/25] x86: Include FSP and CMC binary in the u-boot.rom build rules - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,20/25] x86: Enable the queensbay cpu directory build 1 - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,19/25] x86: Add crownbay defconfig and config.h - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,18/25] x86: Add queensbay and crownbay Kconfig files - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,17/25] x86: Add basic support to queensbay platform and crownbay board - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,16/25] x86: Integrate Tunnel Creek processor microcode - - - - --- 2014-12-04 Bin Meng sjg Superseded
[U-Boot,15/25] x86: Add a simple command to show FSP HOB information - - - - --- 2014-12-04 Bin Meng sjg Superseded
« 1 2 ... 28 29 30 31 »