Show patches with: State = Action Required       |    Archived = No       |   1017 patches
« 1 2 ... 8 9 10 11 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[v2] riscv: cancel the limitation that NR_CPUS is less than or equal to 32 [v2] riscv: cancel the limitation that NR_CPUS is less than or equal to 32 - - 1 - --- 2021-12-21 Xiang W Andes New
[Cubieboard2,v1] Enable early LED support [Cubieboard2,v1] Enable early LED support - - - - --- 2021-12-17 Javad Rahimi apritzel New
[v2] squashfs: Fix file lookups on appended images [v2] squashfs: Fix file lookups on appended images - - - - --- 2021-12-15 Campbell Suter trini Needs Review / ACK
[v1,7/9] spi: npcm-fiu: add NPCM8xx FIU controller driver Add Nuvoton NPCM845 support - - - - --- 2021-12-15 Stanley Chu trini New
[2/2] sunxi: configs: add defconfig for pine H64 model B Add support for pine H64 model B board - - - - --- 2021-12-14 Daniel Wagenknecht apritzel New
[1/2] sunxi: dts: add device-tree for pine H64 model B Add support for pine H64 model B board - - - - --- 2021-12-14 Daniel Wagenknecht apritzel New
[1/5] net: ravb: Support multiple clocks Resync Devices trees with Linux 5.16-rc3 and fix breakages - - 1 - --- 2021-12-06 Adam Ford marex New
[1/1] video: mxsfb: fix pixel clock polarity [1/1] video: mxsfb: fix pixel clock polarity - - 1 - --- 2021-11-26 Sébastien Szymanski ag Under Review
[RESEND] rpi: Copy properties from firmware dtb to the loaded dtb [RESEND] rpi: Copy properties from firmware dtb to the loaded dtb - - - - --- 2021-11-25 Sjoerd Simons matthias_bgg New
sdhci: zynqmp: Setting up clock frequency based on DT sdhci: zynqmp: Setting up clock frequency based on DT - - - - --- 2021-11-18 Michal Simek monstr New
[1/1] pxe: simplify label_boot() [1/1] pxe: simplify label_boot() - - 2 - --- 2021-11-15 Heinrich Schuchardt jhersh New
[16/16] tools: Add man pages for fdt_sign and fdt_check_sign tools: Add support for signing devicetree blobs - - - - --- 2021-11-12 Simon Glass trini Needs Review / ACK
[15/16] test: Add a test for FDT signing tools: Add support for signing devicetree blobs - - - - --- 2021-11-12 Simon Glass trini Needs Review / ACK
[14/16] tools: Add a new tool to check FDT-blob signatures tools: Add support for signing devicetree blobs - - - - --- 2021-11-12 Simon Glass trini Needs Review / ACK
[13/16] tools: Add a new tool to sign FDT blobs tools: Add support for signing devicetree blobs - - - - --- 2021-11-12 Simon Glass trini Needs Review / ACK
[2/2] test_vboot.py: include test of fdt_add_pubkey tool RFC: add fdt_add_pubkey tool - - - - --- 2021-11-11 Roman Kopytin trini New
[1/2] tools: add fdt_add_pubkey RFC: add fdt_add_pubkey tool - - - - --- 2021-11-11 Roman Kopytin trini New
[v1,2/2] x86: scu: Add a few debug messages to the driver [v1,1/2] hexdump: Introduce debug APIs - - 1 - --- 2021-11-09 Andy Shevchenko trini New
[v1,1/2] hexdump: Introduce debug APIs [v1,1/2] hexdump: Introduce debug APIs - - - - --- 2021-11-09 Andy Shevchenko trini New
Allow FIT Image Signature Verification to use RSA Public Key specified in DER Format Allow FIT Image Signature Verification to use RSA Public Key specified in DER Format - - - - --- 2021-11-05 Harshvardhan Patel trini New
net: gem: Reduce timeout of mdio phy idle status check net: gem: Reduce timeout of mdio phy idle status check - - 1 - --- 2021-10-29 Michal Simek monstr New
ARM: amlogic: add JetHub D1 eth mac generation with manufacturer OUI ARM: amlogic: add JetHub D1 eth mac generation with manufacturer OUI - - - - --- 2021-10-29 Vyacheslav Bocharov narmstrong New
[v3] video: fix positioning in TrueType console [v3] video: fix positioning in TrueType console - - - 1 --- 2021-10-28 Heinrich Schuchardt ag New
Supports SPLASH_STORAGE_MMC and SPLASH_STORAGE_RAW together Supports SPLASH_STORAGE_MMC and SPLASH_STORAGE_RAW together - - - - --- 2021-10-28 Federico Giovanardi ag Under Review
Avoid possible NULL dereference in XHCI driver Avoid possible NULL dereference in XHCI driver - - - - --- 2021-10-25 Jim Posen marex New
[1/1] blk: simplify blk_get_devnum_by_typename() [1/1] blk: simplify blk_get_devnum_by_typename() - - - - --- 2021-10-23 Heinrich Schuchardt sjg New
socfpga: enable EFI partition support for de0-nano-soc socfpga: enable EFI partition support for de0-nano-soc - - 1 - --- 2021-10-22 Frank Kunz simongoldschmidt New
tools/Makefile: fix {C,LD}FLAGS with CROSS_BUILD_TOOLS tools/Makefile: fix {C,LD}FLAGS with CROSS_BUILD_TOOLS - - - - --- 2021-10-16 Fabrice Fontaine trini New
[PATCH1/1] sqfs: sqfs_tokenize() should fill the tokens list instead of free items [PATCH1/1] sqfs: sqfs_tokenize() should fill the tokens list instead of free items - - - - --- 2021-10-16 Jincheng Wang trini New
[PATCHv2] fpga_load: pass compatible string [PATCHv2] fpga_load: pass compatible string - - 1 - --- 2021-10-15 Jorge Ramirez-Ortiz, Foundries monstr New
spl: Make SPL_NET depend on SPL_OF_CONTROL spl: Make SPL_NET depend on SPL_OF_CONTROL - - - - --- 2021-10-14 Tom Rini trini New
[v5,2/2] firmware: zynqmp: return status in EL2 from xilinx_pm_request. [v5,1/2] firmware: zynqmp: fix write to an uninitialised pointer in xilinx_pm_request - - - - --- 2021-10-14 Adrian Fiergolski monstr New
[v5,1/2] firmware: zynqmp: fix write to an uninitialised pointer in xilinx_pm_request [v5,1/2] firmware: zynqmp: fix write to an uninitialised pointer in xilinx_pm_request - - - - --- 2021-10-14 Adrian Fiergolski monstr New
[PATCHv2] arm64: zynqmp: Print the secure boot status information [PATCHv2] arm64: zynqmp: Print the secure boot status information - - - - --- 2021-10-13 Jorge Ramirez-Ortiz, Foundries monstr New
[PATCHv3] zynqmp: restore the jtag interface [PATCHv3] zynqmp: restore the jtag interface - - - - --- 2021-10-13 Jorge Ramirez-Ortiz, Foundries monstr New
[3/3] sunxi: binman: Enable SPL FIT loading for 32-bit SoCs sunxi: SPL FIT support for 32-bit sunxi SoCs - - - - --- 2021-10-13 Samuel Holland apritzel New
[2/3] binman: Prevent entries in a section from overlapping sunxi: SPL FIT support for 32-bit sunxi SoCs - - - - --- 2021-10-13 Samuel Holland apritzel New
[1/3] Kconfig: Remove an impossible condition sunxi: SPL FIT support for 32-bit sunxi SoCs - - - - --- 2021-10-13 Samuel Holland apritzel New
[v3,13/13] ARM: dts: stm32mp: dts: Don't remove OPTEE nodes for DK2 boards stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,12/13] stm32mp1: spl: Copy optee nodes to target FDT for OP-TEE payloads stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,11/13] ARM: dts: stm32mp: Add OP-TEE "/firmware" node to SPL dtb stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,10/13] lib: Makefile: Make optee library available in SPL stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,09/13] stm32mp1: spl: Configure MAC address when booting OP-TEE stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,08/13] arm: stm32mp: Factor out reading MAC address from OTP stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,07/13] arm: stm32mp: bsec: Update OTP shadow registers in SPL stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,06/13] fdt_support: Implement fdt_ethernet_set_macaddr() stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,05/13] board: stm32mp1: Implement board_fit_config_name_match() for SPL stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,04/13] stm32mp1: Add support for falcon mode boot from SD card stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,03/13] stm32mp1: Add support for baudrates higher than 115200 stm32mp1: Support falcon mode with OP-TEE payloads - - 1 - --- 2021-10-08 Alex G. pchotard New
[v3,02/13] spl: Move SYS_MMCSD_RAW_MODE_KERNEL_SECTOR to Kconfig stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v3,01/13] spl: Untagle spl_start_uboot() from spl_mmc.c stm32mp1: Support falcon mode with OP-TEE payloads - - - - --- 2021-10-08 Alex G. pchotard New
[v2] ARM: amlogic: update JetHub D1/H1 configs (was: add SYS_LOAD_ADDR to JetHub D1/H1 configs) [v2] ARM: amlogic: update JetHub D1/H1 configs (was: add SYS_LOAD_ADDR to JetHub D1/H1 configs) - - - - --- 2021-10-06 Vyacheslav Bocharov narmstrong New
[v2] usb: xhci-brcm: Include header file needed for dev_err [v2] usb: xhci-brcm: Include header file needed for dev_err - 1 2 - --- 2021-10-06 Stefan Agner marex New
ARM: amlogic: add sm efuse write support and cmd for read/write efuse ARM: amlogic: add sm efuse write support and cmd for read/write efuse - - - - --- 2021-10-05 Vyacheslav Bocharov narmstrong New
[RFC] rpi: copy the EMMC controller configuration from firmware-supplied DT [RFC] rpi: copy the EMMC controller configuration from firmware-supplied DT - - - - --- 2021-09-29 K900 matthias_bgg New
[RFC] RFC: Replace CONFIG_SYS_BAUDRATE_TABLE by board and UART driver rounding functions [RFC] RFC: Replace CONFIG_SYS_BAUDRATE_TABLE by board and UART driver rounding functions - - - - --- 2021-09-25 Pali Rohár trini Needs Review / ACK
[RFC,4/4] nvme: translate virtual addresses into the bus's address space [RFC,1/4] Revert "nvme: Correct the prps per page calculation method" - - - - --- 2021-09-23 Stefan Agner trini Needs Review / ACK
[RFC,3/4] nvme: Use pointer for CPU addressed buffers [RFC,1/4] Revert "nvme: Correct the prps per page calculation method" - - - - --- 2021-09-23 Stefan Agner trini Needs Review / ACK
[RFC,2/4] nvme: improve readability of nvme_setup_prps() [RFC,1/4] Revert "nvme: Correct the prps per page calculation method" - - - - --- 2021-09-23 Stefan Agner trini Needs Review / ACK
[RFC,1/4] Revert "nvme: Correct the prps per page calculation method" [RFC,1/4] Revert "nvme: Correct the prps per page calculation method" - - - - --- 2021-09-23 Stefan Agner trini Needs Review / ACK
[V2,6/6] ARM: rmobile: Rename r8a774a1_beacon_defconfig to rzg2_beacon_defconfig [V2,1/6] ARM: rmobile: Enable board detection when FIT is enabled - - - - --- 2021-09-20 Adam Ford marex New
[V2,3/6] ARM: rmobile: beacon: Remove duplicated for RZ/G2 M/N/H [V2,1/6] ARM: rmobile: Enable board detection when FIT is enabled - - - - --- 2021-09-20 Adam Ford marex New
[v3,2/3] ARM: amlogic: add JetHub D1/H1 device support ARM: meson: add support for JetHub D1/H1 - - 1 - --- 2021-09-20 Vyacheslav Bocharov narmstrong New
[v3,10/10] ARM: amlogic: add Banana Pi M5 [v3,01/10] ARM: meson: Sync Amlogic DT from Linux 5.14 - - - - --- 2021-09-17 Neil Armstrong narmstrong New
[v3,09/10] ARM: meson: add Beelink GS-King X board [v3,01/10] ARM: meson: Sync Amlogic DT from Linux 5.14 - - - - --- 2021-09-17 Neil Armstrong narmstrong New
[v3,07/10] ARM: amlogic: add support for Odroid-HC4 device [v3,01/10] ARM: meson: Sync Amlogic DT from Linux 5.14 - - - - --- 2021-09-17 Neil Armstrong narmstrong New
[next] lib: hash-checksum: Use DM_HASH if supported [next] lib: hash-checksum: Use DM_HASH if supported - - - - --- 2021-09-16 ChiaWei Wang trini New
[4/4] doc: boards: amlogic: update for Radxa Zero ARM: amlogic: add Radxa Zero - - - - --- 2021-09-15 Christian Hewitt narmstrong New
[3/4] boards: amlogic: add Radxa Zero defconfig ARM: amlogic: add Radxa Zero - - - - --- 2021-09-15 Christian Hewitt narmstrong New
[1/4] ARM: dts: sort Amlogic Makefile section ARM: amlogic: add Radxa Zero - - - - --- 2021-09-15 Christian Hewitt narmstrong New
[2/2] mmc: bcm2835-host: let firmware manage the clock divisor mmc: bcm2835_sdhost: use fallback clock rate - - - - --- 2021-09-14 Vincent Fazio matthias_bgg New
[1/2] arm: rpi: fallback to max clock rate for MMC clock mmc: bcm2835_sdhost: use fallback clock rate - - - - --- 2021-09-14 Vincent Fazio matthias_bgg New
[3/3] stm32mp1: Replace STM32MP15x_STM32IMAGE with TFABOOT_FIP_CONTAINER stm32mp: Attempt to resolve unintended breakage with v2021.10-rc2 - - - - --- 2021-09-09 Alex G. pchotard New
[2/3] arm: Kconfig: Introduce a TFABOOT_FIP_CONTAINER option stm32mp: Attempt to resolve unintended breakage with v2021.10-rc2 - - - - --- 2021-09-09 Alex G. pchotard New
[1/3] stm32mp: Rename FIP config to stm32mp15_tfaboot_fip_defconig stm32mp: Attempt to resolve unintended breakage with v2021.10-rc2 - - - - --- 2021-09-09 Alex G. pchotard New
[V2] colibri-imx7: move CONFIG_BOOTCOMMAND from header to defconfig [V2] colibri-imx7: move CONFIG_BOOTCOMMAND from header to defconfig - - - - --- 2021-09-01 Ming Liu Under Review
[v2] pwm: Add driver for cadence TTC [v2] pwm: Add driver for cadence TTC - - - - --- 2021-08-30 Michal Simek monstr New
[2/2] arm: rmobile: Remove duplicate code from beacon-rzg2m and hihope-rzg2 [1/2] arm: mach-rmobile: Move cpu_reset to rzg2-reset.c - - - - --- 2021-08-27 Adam Ford marex New
[1/2] arm: mach-rmobile: Move cpu_reset to rzg2-reset.c [1/2] arm: mach-rmobile: Move cpu_reset to rzg2-reset.c - - - - --- 2021-08-27 Adam Ford marex New
[V2,2/2] ARM: dts: rmobile: beacon-renesom: Enable Ethernet [V2,1/2] ARM: dts: rmobile: beacon-renesom: Enable USB and ethernet ref clocks - - - - --- 2021-08-24 Adam Ford marex New
[V2,1/2] ARM: dts: rmobile: beacon-renesom: Enable USB and ethernet ref clocks [V2,1/2] ARM: dts: rmobile: beacon-renesom: Enable USB and ethernet ref clocks - - - - --- 2021-08-24 Adam Ford marex New
[v2] dm: usb: add hook for low level usb init [v2] dm: usb: add hook for low level usb init - - - - --- 2021-08-18 Simon-Pierre Allaire marex New
[v2] arm: mvebu: a37xx: Define CONFIG_SYS_REF_CLK and use it instead of get_ref_clk() [v2] arm: mvebu: a37xx: Define CONFIG_SYS_REF_CLK and use it instead of get_ref_clk() - - 1 - --- 2021-08-16 Pali Rohár stroese New
[v3,3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support Add support for the GST ESPRESSOBin-Ultra board - - - - --- 2021-08-12 Luka Kovacic stroese New
[v3,2/3] arm: mvebu: mvebu_armada-37xx: Define the loadaddr environment variable Add support for the GST ESPRESSOBin-Ultra board - - - - --- 2021-08-12 Luka Kovacic stroese New
[v3,1/3] arm: mvebu: mvebu_armada-37xx: Implement the mac command (Marvell hw_info) Add support for the GST ESPRESSOBin-Ultra board - - - - --- 2021-08-12 Luka Kovacic stroese New
[3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support Add support for the GST ESPRESSOBin-Ultra board - - - - --- 2021-08-11 Gérald Kerma stroese New
[2/3] arm: mvebu: mvebu_armada-37xx: Define the loadaddr environment variable Add support for the GST ESPRESSOBin-Ultra board - - - - --- 2021-08-11 Gérald Kerma stroese New
[1/3] cmd: mvebu: Implement the Marvell hw_info command Add support for the GST ESPRESSOBin-Ultra board - - - - --- 2021-08-11 Gérald Kerma stroese New
[4/4] xilinx: Enable config to display cpuinfo xilinx: Add SoC Xilinx driver for zynqmp & versal - - 1 - --- 2021-08-10 Michal Simek monstr New
xilinx: Disable ARCH_FIXUP_FDT_MEMORY xilinx: Disable ARCH_FIXUP_FDT_MEMORY - - - - --- 2021-08-06 Michal Simek monstr New
reset: zynqmp: Add reset controller for ZynqMP SoC reset: zynqmp: Add reset controller for ZynqMP SoC - - - - --- 2021-07-30 Michal Simek monstr New
[2/4] cmd: date: rtc: Update command to read the first RTC with seq 0 xilinx: Add RTC support for Xilinx ZynqMP - - - - --- 2021-07-29 Michal Simek monstr New
spi: fix xilinx-spi lockup when fifo-size undefined in dtree spi: fix xilinx-spi lockup when fifo-size undefined in dtree - - - - --- 2021-07-27 Pauli Oikkonen monstr New
[27/27] arm: dts: add pocketgo handheld support Add F1C100s based PocketGo handheld support - - - - --- 2021-07-25 Yifan Gu apritzel New
[26/27] arm: dts: suniv: define uart1 pins Add F1C100s based PocketGo handheld support - - - - --- 2021-07-25 Yifan Gu apritzel New
[25/27] sunxi: suniv: disable mmc optimization for suniv Add F1C100s based PocketGo handheld support - - - - --- 2021-07-25 Yifan Gu apritzel New
[23/27] sunxi: suniv: do not detect boot sector on suniv Add F1C100s based PocketGo handheld support - - - - --- 2021-07-25 Yifan Gu apritzel New
[22/27] sunxi: suniv: allow serial connection on uart1 Add F1C100s based PocketGo handheld support - - - - --- 2021-07-25 Yifan Gu apritzel New
[13/27] sunxi: Don't provide enable_cache() on suniv Add F1C100s based PocketGo handheld support - - - - --- 2021-07-25 Yifan Gu apritzel New
« 1 2 ... 8 9 10 11 »