| Message ID | 20221116141155.14788-1-ashok.reddy.soma@amd.com |
|---|---|
| Headers | show |
| Series | Add quad & octal spi flash mini u-boot configuration files | expand |
On 11/16/22 15:11, Ashok Reddy Soma wrote: > Add new configuration files and device trees for quad and octal spi flash > mini u-boot. With these configs's mini u-boot will run from on chip > memory(OCM) and uses DCC terminal for console output. > > Changes in v3: > - Added dts files for qspi mini configuration > - Added CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y > CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe0000 > to fix compilation error. > - Add dts files for octal flash mini u-boot. > - Add below configs to fix compilation error. > CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y > CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xFFFE0000 > > Changes in v2: > - Removed configs/xilinx_* from MAINTAINERS as, it is already taken care. > - Run savedefconfig and updated mini config to align with latest Kconfig layout > - Run savedefconfig and updated mini config for ospi to align with > latest Kconfig layout > > Ashok Reddy Soma (3): > arm64: versal: Add qspi flash mini u-boot configuration > spi: cadence-qspi: Fix compilation error in mini u-boot flash reset > arm64: versal: Add octal spi flash mini u-boot configuration > > arch/arm/dts/Makefile | 2 + > arch/arm/dts/versal-mini-ospi-single.dts | 16 +++++ > arch/arm/dts/versal-mini-ospi.dtsi | 77 +++++++++++++++++++++++ > arch/arm/dts/versal-mini-qspi-single.dts | 16 +++++ > arch/arm/dts/versal-mini-qspi.dtsi | 72 +++++++++++++++++++++ > configs/xilinx_versal_mini_ospi_defconfig | 72 +++++++++++++++++++++ > configs/xilinx_versal_mini_qspi_defconfig | 75 ++++++++++++++++++++++ > drivers/spi/cadence_ospi_versal.c | 4 +- > 8 files changed, 332 insertions(+), 2 deletions(-) > create mode 100644 arch/arm/dts/versal-mini-ospi-single.dts > create mode 100644 arch/arm/dts/versal-mini-ospi.dtsi > create mode 100644 arch/arm/dts/versal-mini-qspi-single.dts > create mode 100644 arch/arm/dts/versal-mini-qspi.dtsi > create mode 100644 configs/xilinx_versal_mini_ospi_defconfig > create mode 100644 configs/xilinx_versal_mini_qspi_defconfig > Applied. M
Add new configuration files and device trees for quad and octal spi flash mini u-boot. With these configs's mini u-boot will run from on chip memory(OCM) and uses DCC terminal for console output. Changes in v3: - Added dts files for qspi mini configuration - Added CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe0000 to fix compilation error. - Add dts files for octal flash mini u-boot. - Add below configs to fix compilation error. CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xFFFE0000 Changes in v2: - Removed configs/xilinx_* from MAINTAINERS as, it is already taken care. - Run savedefconfig and updated mini config to align with latest Kconfig layout - Run savedefconfig and updated mini config for ospi to align with latest Kconfig layout Ashok Reddy Soma (3): arm64: versal: Add qspi flash mini u-boot configuration spi: cadence-qspi: Fix compilation error in mini u-boot flash reset arm64: versal: Add octal spi flash mini u-boot configuration arch/arm/dts/Makefile | 2 + arch/arm/dts/versal-mini-ospi-single.dts | 16 +++++ arch/arm/dts/versal-mini-ospi.dtsi | 77 +++++++++++++++++++++++ arch/arm/dts/versal-mini-qspi-single.dts | 16 +++++ arch/arm/dts/versal-mini-qspi.dtsi | 72 +++++++++++++++++++++ configs/xilinx_versal_mini_ospi_defconfig | 72 +++++++++++++++++++++ configs/xilinx_versal_mini_qspi_defconfig | 75 ++++++++++++++++++++++ drivers/spi/cadence_ospi_versal.c | 4 +- 8 files changed, 332 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/versal-mini-ospi-single.dts create mode 100644 arch/arm/dts/versal-mini-ospi.dtsi create mode 100644 arch/arm/dts/versal-mini-qspi-single.dts create mode 100644 arch/arm/dts/versal-mini-qspi.dtsi create mode 100644 configs/xilinx_versal_mini_ospi_defconfig create mode 100644 configs/xilinx_versal_mini_qspi_defconfig