mbox series

[U-Boot,0/3] ARM: omap3: evm: Add OF_CONTROL support

Message ID 20171216201450.5770-1-woods.technical@gmail.com
Headers show
Series ARM: omap3: evm: Add OF_CONTROL support | expand

Message

Derald Woods Dec. 16, 2017, 8:14 p.m. UTC 
This series adds OF_CONTROL support for TMDSEVM{3530,3730} and
additionally updates ethaddr setup with smc911x initialization.

Devicetree files are taken from Linux v4.15-rc3. Note that this is the
first addition of OMAP34XX devicetree files.

Tested using GCC 7.2.0 [--with-float=hard --with-mode=thumb]

--- 8< -----------------------------------------------------------------
U-Boot SPL 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10)
Trying to boot from MMC1
reading u-boot.img
reading u-boot.img


U-Boot 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10 -0600)

OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 MHz
Model: TI OMAP35XX EVM (TMDSEVM3530)
OMAP3 EVM board + LPDDR/NAND
I2C:   ready
DRAM:  256 MiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
Read back SMSC id 0x92200000
OMAP die ID: 265a002400000000040365fa1801b01f
Net:   smc911x-0
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
Hit any key to stop autoboot:  0 
OMAP3_EVM # echo $stdin;echo $stdout;echo $stderr
serial@4806a000
serial@4806a000
serial@4806a000
--- 8< -----------------------------------------------------------------


Derald D. Woods (3):
  ARM: dts: omap3-evm: Add support for TMDSEVM{3530,3730}
  ARM: dts: omap3-evm: Enable DM and devicetree for TMDSEVM{3530,3730}
  ARM: omap3: evm: Refactor 'board_eth_init'

 arch/arm/dts/Makefile                           |   4 +
 arch/arm/dts/omap-gpmc-smsc911x.dtsi            |  55 ++++++
 arch/arm/dts/omap3-evm-37xx-u-boot.dtsi         |  29 ++++
 arch/arm/dts/omap3-evm-37xx.dts                 | 110 ++++++++++++
 arch/arm/dts/omap3-evm-common.dtsi              | 195 +++++++++++++++++++++
 arch/arm/dts/omap3-evm-processor-common.dtsi    | 216 ++++++++++++++++++++++++
 arch/arm/dts/omap3-evm-u-boot.dtsi              |  29 ++++
 arch/arm/dts/omap3-evm.dts                      |  89 ++++++++++
 arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi |  73 ++++++++
 arch/arm/dts/omap34xx.dtsi                      |  84 +++++++++
 arch/arm/mach-omap2/omap3/Kconfig               |   4 +
 board/ti/evm/evm.c                              |  24 +--
 configs/omap3_evm_defconfig                     |   9 +-
 include/configs/omap3_evm.h                     |   2 -
 14 files changed, 896 insertions(+), 27 deletions(-)
 create mode 100644 arch/arm/dts/omap-gpmc-smsc911x.dtsi
 create mode 100644 arch/arm/dts/omap3-evm-37xx-u-boot.dtsi
 create mode 100644 arch/arm/dts/omap3-evm-37xx.dts
 create mode 100644 arch/arm/dts/omap3-evm-common.dtsi
 create mode 100644 arch/arm/dts/omap3-evm-processor-common.dtsi
 create mode 100644 arch/arm/dts/omap3-evm-u-boot.dtsi
 create mode 100644 arch/arm/dts/omap3-evm.dts
 create mode 100644 arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi
 create mode 100644 arch/arm/dts/omap34xx.dtsi

Comments

Derald Woods Dec. 26, 2017, 3:34 a.m. UTC | #1 
On Sat, Dec 16, 2017 at 02:14:47PM -0600, Derald D. Woods wrote:
> This series adds OF_CONTROL support for TMDSEVM{3530,3730} and
> additionally updates ethaddr setup with smc911x initialization.
> 
> Devicetree files are taken from Linux v4.15-rc3. Note that this is the
> first addition of OMAP34XX devicetree files.
> 
> Tested using GCC 7.2.0 [--with-float=hard --with-mode=thumb]
> 
> --- 8< -----------------------------------------------------------------
> U-Boot SPL 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10)
> Trying to boot from MMC1
> reading u-boot.img
> reading u-boot.img
> 
> 
> U-Boot 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10 -0600)
> 
> OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 MHz
> Model: TI OMAP35XX EVM (TMDSEVM3530)
> OMAP3 EVM board + LPDDR/NAND
> I2C:   ready
> DRAM:  256 MiB
> NAND:  256 MiB
> MMC:   OMAP SD/MMC: 0
> Read back SMSC id 0x92200000
> OMAP die ID: 265a002400000000040365fa1801b01f
> Net:   smc911x-0
> starting USB...
> USB0:   USB EHCI 1.00
> scanning bus 0 for devices... 1 USB Device(s) found
> Hit any key to stop autoboot:  0 
> OMAP3_EVM # echo $stdin;echo $stdout;echo $stderr
> serial@4806a000
> serial@4806a000
> serial@4806a000
> --- 8< -----------------------------------------------------------------
> 
> 
> Derald D. Woods (3):
>   ARM: dts: omap3-evm: Add support for TMDSEVM{3530,3730}
>   ARM: dts: omap3-evm: Enable DM and devicetree for TMDSEVM{3530,3730}
>   ARM: omap3: evm: Refactor 'board_eth_init'
> 
>  arch/arm/dts/Makefile                           |   4 +
>  arch/arm/dts/omap-gpmc-smsc911x.dtsi            |  55 ++++++
>  arch/arm/dts/omap3-evm-37xx-u-boot.dtsi         |  29 ++++
>  arch/arm/dts/omap3-evm-37xx.dts                 | 110 ++++++++++++
>  arch/arm/dts/omap3-evm-common.dtsi              | 195 +++++++++++++++++++++
>  arch/arm/dts/omap3-evm-processor-common.dtsi    | 216 ++++++++++++++++++++++++
>  arch/arm/dts/omap3-evm-u-boot.dtsi              |  29 ++++
>  arch/arm/dts/omap3-evm.dts                      |  89 ++++++++++
>  arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi |  73 ++++++++
>  arch/arm/dts/omap34xx.dtsi                      |  84 +++++++++
>  arch/arm/mach-omap2/omap3/Kconfig               |   4 +
>  board/ti/evm/evm.c                              |  24 +--
>  configs/omap3_evm_defconfig                     |   9 +-
>  include/configs/omap3_evm.h                     |   2 -
>  14 files changed, 896 insertions(+), 27 deletions(-)
>  create mode 100644 arch/arm/dts/omap-gpmc-smsc911x.dtsi
>  create mode 100644 arch/arm/dts/omap3-evm-37xx-u-boot.dtsi
>  create mode 100644 arch/arm/dts/omap3-evm-37xx.dts
>  create mode 100644 arch/arm/dts/omap3-evm-common.dtsi
>  create mode 100644 arch/arm/dts/omap3-evm-processor-common.dtsi
>  create mode 100644 arch/arm/dts/omap3-evm-u-boot.dtsi
>  create mode 100644 arch/arm/dts/omap3-evm.dts
>  create mode 100644 arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi
>  create mode 100644 arch/arm/dts/omap34xx.dtsi
> 
> -- 
> 2.15.1
> 

Ping. If there is any concern, please let me know and I will make
corrections. I plan to also update beagleboard and overo to use their
respective devicetree files. I would like to have these three OMAP34XX
boards, that I possess, to be near the same level of support. It will
help me to continue testing OMAP34XX stuff in general.

Derald
Tom Rini Dec. 26, 2017, 4:14 p.m. UTC | #2 
On Mon, Dec 25, 2017 at 09:34:03PM -0600, Derald D. Woods wrote:
> On Sat, Dec 16, 2017 at 02:14:47PM -0600, Derald D. Woods wrote:
> > This series adds OF_CONTROL support for TMDSEVM{3530,3730} and
> > additionally updates ethaddr setup with smc911x initialization.
> > 
> > Devicetree files are taken from Linux v4.15-rc3. Note that this is the
> > first addition of OMAP34XX devicetree files.
> > 
> > Tested using GCC 7.2.0 [--with-float=hard --with-mode=thumb]
> > 
> > --- 8< -----------------------------------------------------------------
> > U-Boot SPL 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10)
> > Trying to boot from MMC1
> > reading u-boot.img
> > reading u-boot.img
> > 
> > 
> > U-Boot 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10 -0600)
> > 
> > OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 MHz
> > Model: TI OMAP35XX EVM (TMDSEVM3530)
> > OMAP3 EVM board + LPDDR/NAND
> > I2C:   ready
> > DRAM:  256 MiB
> > NAND:  256 MiB
> > MMC:   OMAP SD/MMC: 0
> > Read back SMSC id 0x92200000
> > OMAP die ID: 265a002400000000040365fa1801b01f
> > Net:   smc911x-0
> > starting USB...
> > USB0:   USB EHCI 1.00
> > scanning bus 0 for devices... 1 USB Device(s) found
> > Hit any key to stop autoboot:  0 
> > OMAP3_EVM # echo $stdin;echo $stdout;echo $stderr
> > serial@4806a000
> > serial@4806a000
> > serial@4806a000
> > --- 8< -----------------------------------------------------------------
> > 
> > 
> > Derald D. Woods (3):
> >   ARM: dts: omap3-evm: Add support for TMDSEVM{3530,3730}
> >   ARM: dts: omap3-evm: Enable DM and devicetree for TMDSEVM{3530,3730}
> >   ARM: omap3: evm: Refactor 'board_eth_init'
> > 
> >  arch/arm/dts/Makefile                           |   4 +
> >  arch/arm/dts/omap-gpmc-smsc911x.dtsi            |  55 ++++++
> >  arch/arm/dts/omap3-evm-37xx-u-boot.dtsi         |  29 ++++
> >  arch/arm/dts/omap3-evm-37xx.dts                 | 110 ++++++++++++
> >  arch/arm/dts/omap3-evm-common.dtsi              | 195 +++++++++++++++++++++
> >  arch/arm/dts/omap3-evm-processor-common.dtsi    | 216 ++++++++++++++++++++++++
> >  arch/arm/dts/omap3-evm-u-boot.dtsi              |  29 ++++
> >  arch/arm/dts/omap3-evm.dts                      |  89 ++++++++++
> >  arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi |  73 ++++++++
> >  arch/arm/dts/omap34xx.dtsi                      |  84 +++++++++
> >  arch/arm/mach-omap2/omap3/Kconfig               |   4 +
> >  board/ti/evm/evm.c                              |  24 +--
> >  configs/omap3_evm_defconfig                     |   9 +-
> >  include/configs/omap3_evm.h                     |   2 -
> >  14 files changed, 896 insertions(+), 27 deletions(-)
> >  create mode 100644 arch/arm/dts/omap-gpmc-smsc911x.dtsi
> >  create mode 100644 arch/arm/dts/omap3-evm-37xx-u-boot.dtsi
> >  create mode 100644 arch/arm/dts/omap3-evm-37xx.dts
> >  create mode 100644 arch/arm/dts/omap3-evm-common.dtsi
> >  create mode 100644 arch/arm/dts/omap3-evm-processor-common.dtsi
> >  create mode 100644 arch/arm/dts/omap3-evm-u-boot.dtsi
> >  create mode 100644 arch/arm/dts/omap3-evm.dts
> >  create mode 100644 arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi
> >  create mode 100644 arch/arm/dts/omap34xx.dtsi
> > 
> > -- 
> > 2.15.1
> > 
> 
> Ping. If there is any concern, please let me know and I will make
> corrections. I plan to also update beagleboard and overo to use their
> respective devicetree files. I would like to have these three OMAP34XX
> boards, that I possess, to be near the same level of support. It will
> help me to continue testing OMAP34XX stuff in general.

It's localized enough that it's your call, do you want it in for
v2018.01 or .03?  Thanks!
Derald Woods Dec. 26, 2017, 5:08 p.m. UTC | #3 
On Tue, Dec 26, 2017 at 11:14:55AM -0500, Tom Rini wrote:
> On Mon, Dec 25, 2017 at 09:34:03PM -0600, Derald D. Woods wrote:
> > On Sat, Dec 16, 2017 at 02:14:47PM -0600, Derald D. Woods wrote:
> > > This series adds OF_CONTROL support for TMDSEVM{3530,3730} and
> > > additionally updates ethaddr setup with smc911x initialization.
> > > 
> > > Devicetree files are taken from Linux v4.15-rc3. Note that this is the
> > > first addition of OMAP34XX devicetree files.
> > > 
> > > Tested using GCC 7.2.0 [--with-float=hard --with-mode=thumb]
> > > 
> > > --- 8< -----------------------------------------------------------------
> > > U-Boot SPL 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10)
> > > Trying to boot from MMC1
> > > reading u-boot.img
> > > reading u-boot.img
> > > 
> > > 
> > > U-Boot 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10 -0600)
> > > 
> > > OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 MHz
> > > Model: TI OMAP35XX EVM (TMDSEVM3530)
> > > OMAP3 EVM board + LPDDR/NAND
> > > I2C:   ready
> > > DRAM:  256 MiB
> > > NAND:  256 MiB
> > > MMC:   OMAP SD/MMC: 0
> > > Read back SMSC id 0x92200000
> > > OMAP die ID: 265a002400000000040365fa1801b01f
> > > Net:   smc911x-0
> > > starting USB...
> > > USB0:   USB EHCI 1.00
> > > scanning bus 0 for devices... 1 USB Device(s) found
> > > Hit any key to stop autoboot:  0 
> > > OMAP3_EVM # echo $stdin;echo $stdout;echo $stderr
> > > serial@4806a000
> > > serial@4806a000
> > > serial@4806a000
> > > --- 8< -----------------------------------------------------------------
> > > 
> > > 
> > > Derald D. Woods (3):
> > >   ARM: dts: omap3-evm: Add support for TMDSEVM{3530,3730}
> > >   ARM: dts: omap3-evm: Enable DM and devicetree for TMDSEVM{3530,3730}
> > >   ARM: omap3: evm: Refactor 'board_eth_init'
> > > 
> > >  arch/arm/dts/Makefile                           |   4 +
> > >  arch/arm/dts/omap-gpmc-smsc911x.dtsi            |  55 ++++++
> > >  arch/arm/dts/omap3-evm-37xx-u-boot.dtsi         |  29 ++++
> > >  arch/arm/dts/omap3-evm-37xx.dts                 | 110 ++++++++++++
> > >  arch/arm/dts/omap3-evm-common.dtsi              | 195 +++++++++++++++++++++
> > >  arch/arm/dts/omap3-evm-processor-common.dtsi    | 216 ++++++++++++++++++++++++
> > >  arch/arm/dts/omap3-evm-u-boot.dtsi              |  29 ++++
> > >  arch/arm/dts/omap3-evm.dts                      |  89 ++++++++++
> > >  arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi |  73 ++++++++
> > >  arch/arm/dts/omap34xx.dtsi                      |  84 +++++++++
> > >  arch/arm/mach-omap2/omap3/Kconfig               |   4 +
> > >  board/ti/evm/evm.c                              |  24 +--
> > >  configs/omap3_evm_defconfig                     |   9 +-
> > >  include/configs/omap3_evm.h                     |   2 -
> > >  14 files changed, 896 insertions(+), 27 deletions(-)
> > >  create mode 100644 arch/arm/dts/omap-gpmc-smsc911x.dtsi
> > >  create mode 100644 arch/arm/dts/omap3-evm-37xx-u-boot.dtsi
> > >  create mode 100644 arch/arm/dts/omap3-evm-37xx.dts
> > >  create mode 100644 arch/arm/dts/omap3-evm-common.dtsi
> > >  create mode 100644 arch/arm/dts/omap3-evm-processor-common.dtsi
> > >  create mode 100644 arch/arm/dts/omap3-evm-u-boot.dtsi
> > >  create mode 100644 arch/arm/dts/omap3-evm.dts
> > >  create mode 100644 arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi
> > >  create mode 100644 arch/arm/dts/omap34xx.dtsi
> > > 
> > > -- 
> > > 2.15.1
> > > 
> > 
> > Ping. If there is any concern, please let me know and I will make
> > corrections. I plan to also update beagleboard and overo to use their
> > respective devicetree files. I would like to have these three OMAP34XX
> > boards, that I possess, to be near the same level of support. It will
> > help me to continue testing OMAP34XX stuff in general.
> 
> It's localized enough that it's your call, do you want it in for
> v2018.01 or .03?  Thanks!
> 

I would like it to land in v2018.01 if possible.

Derald