diff mbox series

[v2,7/9] vga16fb: drop powerpc support

Message ID 20230719123944.3438363-8-arnd@kernel.org
State New
Headers show
Series video: screen_info cleanups | expand

Commit Message

Arnd Bergmann July 19, 2023, 12:39 p.m. UTC 
From: Arnd Bergmann <arnd@arndb.de>

I noticed that commit 0db5b61e0dc07 ("fbdev/vga16fb: Create
EGA/VGA devices in sysfb code") broke vga16fb on non-x86 platforms,
because the sysfb code never creates a vga-framebuffer device when
screen_info.orig_video_isVGA is set to '1' instead of VIDEO_TYPE_VGAC.

However, it turns out that the only architecture that has allowed
building vga16fb in the past 20 years is powerpc, and this only worked
on two 32-bit platforms and never on 64-bit powerpc. The last machine
that actually used this was removed in linux-3.10, so this is all dead
code and can be removed.

The big-endian support in vga16fb.c could also be removed, but I'd just
leave this in place.

Fixes: 933ee7119fb14 ("powerpc: remove PReP platform")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/powerpc/kernel/setup-common.c | 16 ----------------
 drivers/video/fbdev/Kconfig        |  2 +-
 drivers/video/fbdev/vga16fb.c      |  9 +--------
 3 files changed, 2 insertions(+), 25 deletions(-)

Comments

Javier Martinez Canillas July 19, 2023, 2:23 p.m. UTC | #1 
Arnd Bergmann <arnd@kernel.org> writes:

> From: Arnd Bergmann <arnd@arndb.de>
>
> I noticed that commit 0db5b61e0dc07 ("fbdev/vga16fb: Create
> EGA/VGA devices in sysfb code") broke vga16fb on non-x86 platforms,
> because the sysfb code never creates a vga-framebuffer device when
> screen_info.orig_video_isVGA is set to '1' instead of VIDEO_TYPE_VGAC.
>
> However, it turns out that the only architecture that has allowed
> building vga16fb in the past 20 years is powerpc, and this only worked
> on two 32-bit platforms and never on 64-bit powerpc. The last machine
> that actually used this was removed in linux-3.10, so this is all dead
> code and can be removed.
>
> The big-endian support in vga16fb.c could also be removed, but I'd just
> leave this in place.
>
> Fixes: 933ee7119fb14 ("powerpc: remove PReP platform")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
diff mbox series

Patch

diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index d2a446216444f..81a6313927228 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -22,7 +22,6 @@ 
 #include <linux/seq_file.h>
 #include <linux/ioport.h>
 #include <linux/console.h>
-#include <linux/screen_info.h>
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/unistd.h>
@@ -98,21 +97,6 @@  int boot_cpu_hwid = -1;
 int dcache_bsize;
 int icache_bsize;
 
-/*
- * This still seems to be needed... -- paulus
- */ 
-struct screen_info screen_info = {
-	.orig_x = 0,
-	.orig_y = 25,
-	.orig_video_cols = 80,
-	.orig_video_lines = 25,
-	.orig_video_isVGA = 1,
-	.orig_video_points = 16
-};
-#if defined(CONFIG_FB_VGA16_MODULE)
-EXPORT_SYMBOL(screen_info);
-#endif
-
 /* Variables required to store legacy IO irq routing */
 int of_i8042_kbd_irq;
 EXPORT_SYMBOL_GPL(of_i8042_kbd_irq);
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 9169ee532baf7..ebc3cdfdfca07 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -368,7 +368,7 @@  config FB_IMSTT
 
 config FB_VGA16
 	tristate "VGA 16-color graphics support"
-	depends on FB && (X86 || PPC)
+	depends on FB && X86
 	select APERTURE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
diff --git a/drivers/video/fbdev/vga16fb.c b/drivers/video/fbdev/vga16fb.c
index 34d00347ad58a..8e28f9dd19044 100644
--- a/drivers/video/fbdev/vga16fb.c
+++ b/drivers/video/fbdev/vga16fb.c
@@ -185,8 +185,6 @@  static inline void setindex(int index)
 /* Check if the video mode is supported by the driver */
 static inline int check_mode_supported(const struct screen_info *si)
 {
-	/* non-x86 architectures treat orig_video_isVGA as a boolean flag */
-#if defined(CONFIG_X86)
 	/* only EGA and VGA in 16 color graphic mode are supported */
 	if (si->orig_video_isVGA != VIDEO_TYPE_EGAC &&
 	    si->orig_video_isVGA != VIDEO_TYPE_VGAC)
@@ -197,7 +195,7 @@  static inline int check_mode_supported(const struct screen_info *si)
 	    si->orig_video_mode != 0x10 &&	/* 640x350/4 (EGA) */
 	    si->orig_video_mode != 0x12)	/* 640x480/4 (VGA) */
 		return -ENODEV;
-#endif
+
 	return 0;
 }
 
@@ -1338,12 +1336,7 @@  static int vga16fb_probe(struct platform_device *dev)
 	printk(KERN_INFO "vga16fb: mapped to 0x%p\n", info->screen_base);
 	par = info->par;
 
-#if defined(CONFIG_X86)
 	par->isVGA = si->orig_video_isVGA == VIDEO_TYPE_VGAC;
-#else
-	/* non-x86 architectures treat orig_video_isVGA as a boolean flag */
-	par->isVGA = si->orig_video_isVGA;
-#endif
 	par->palette_blanked = 0;
 	par->vesa_blanked = 0;